Tata Steel Ltd Jamshedpur : Mechanical Maintenance Manager

[muthukalee]

Mechanical Maintenance Manager
Experience : 2 - 7 Years
Location : Jamshedpur

Key Activities :
Though various analysis tools & improvements
Though Analysis tools and monitoring of critical equipment spare part management. Preparation on project planning and implementation to reduce obsolesce of equipments
Plan approach towards reducing cost by indigenization & standardisation of Items.
Implementing Positive isolation & PSAP driving initiatives
Daily monitoring through Safety Excellence Management System.
Daily activities & auditing standards
Day to day activities & outcome from Sill matrix analysis.
Monitoring compliance as per requirement.

End Results :
Improving MTBF
Reducing MTTR
Optimise MAINTENACE COST
Maintain minimum level of SPARES Stocks.
Compliance to Department Safety plan .
Compliance to Safety Incident & PIR .
Compliance to released safety standards.
Modifying & Improvements in existing SWPs.
Training to Employees to improve their Functional and Leadership qualities.
Compliance to all other activities directly or indirectly impacting on finished goods.

Desired Candidate Profile :
2+ years experience in Lubrication/ Rubber Technology/ Superordinate Inspection/ Hydraulics/ Condition Monitoring in a process plant.

About us :
Established in 1907, Tata Steel is among the top ten global steel companies with an annual crude steel capacity of over 28 million tonnes per annum (mtpa). It is now one of the world's most geographically-diversified steel producers, with operations in 26 countries and a commercial presence in over 50 countries. Tata Steel’s vision is to be the world’s steel industry benchmark through the excellence of its people, its innovative approach and overall conduct. Underpinning this vision is a performance culture committed to aspiration targets, safety and social responsibility, continuous improvement, openness and transparency.

Contact us :
Tata Steel Limited
Bistupur,
Jamshedpur – 831 001

More Details : http://careers.tatasteelindia.com/current-openings.asp

[Guest]

CURRICULUM VITAE
RAKESH KUMAR
E-mai l ID : rajonline06 AT yahoo.co.in

Objective :
A challenging position to work with a team of Condition monitoring and Vibration analysis, who respond, reply to achieve the organizational goals with experience of relevant individual goal with hard work & self improvement in any demanding work or working condition.

Summary :
Over 2+ years of Experience in condition monitoring & Vibration analysis, insitu dynamic balancing, maientance. Extensive hands on experience in any rotating equipment like that F.D.fan, I.D.fan, Boiler feed pump, Cooling Tower fan and Turbine. Has through experience with duties like Installation, Maintenance, Integration and Administration. Can work in demanding time schedule and has excellent attitude towards teamwork.

Education and Technical Background :
Bachelor in ELECTRONICS ENGINEERING from Nagpur University in the Year 2007

Technical Training :
- Undergone Rockwell Automation Training arranged by Dynamic engg.co.Ltd, Delhi. - PLC, SCADA Software.
- Allen Bradley AC Drive.

Career Progression :
1. Hira Group of Industries, Raipur October 2007 to Nov.2008
Working as a Trainee Engineer, Electrical & Maintenance with Hira Group of Industries, Raipur a industry engaged in Bricks div. & Ferro Alloys Div. and machinery manufacturing.
My job responsibility included preventive/predictive maintenance, plant control systems, electrical & switchgear, automation& new projects.

2. M/s Predictive Maintenance & Designs PVT LTD, Bhilai December 2008 to till date
Working as an Executive (Technical Services) with M/s Predictive Maintenance & Designs, an involved in Maintains Consultancy service.
- VIBRATION MONITORING AND ANALYSIS - Vibration Analysis is the dominant technique used for condition monitoring programmes. Consequently, since the greatest population of typical plant equipment is mechanical, this technique has the widest application and benefits in a total plant Programme
- The technique uses noise or vibration created by mechanical equipment and, in some cases by plant systems to determine their actual condition.
- MOTOR CURRENT SIGNATURE ANALYSIS - We sound knowledge about Motor Current Signature Analysis which is useful to diagnosed the varios faults in Motor.
- INSITU-DYNAMIC BALANCING – Balancing is the process of ensuring that the center of mass distribution of a rotating member is coincident with its center of rotation. This is achieved by adjusting the mass distribution of the rotor so that the centrifugal forces are brought within acceptable limits, thereby reducing machine vibration and power consumption.
- THERMOGRAPHY- By using IRISIS Thermal imaging camera and developed reports by its software.
INSTRUMENT USED :
- MIL 811D & SPM – These instruments are basically vibration meter.
- VIBROTEST - 60 Vibration Analyzer/ Data Collector/ DAT - Recorder with Software VIBROEXPERT CM-460 made in GmbH, Germany.
- VIBROTEST (Field Balancer and Vibration Analyzer) made in GmbH, Germany.
- COMMTEST Vb 1000 – Vibration Analyzer, Route Data Collector & Balancer with Software, Ascent Level -1 made in New Zealand. software made in USA
- BASLINE 5060 & 5050 – Vibration analyzer & Balancer made in India.
- IRISIS Thermal imaging camera with software made in USA.

3. I attend presentation arranged our company at “HOTEL PICCADLLY, RAIPUR”. My presentation on “Motor current signature analysis” and “Wear debris analysis” which is useful to detecting fault of motor and oil.
Key Result Areas :
- Predictive Maintenance, Condition Monitoring & Vibration Analysis and Diagnostic Studies of Industrial Equipment e. g.- T. G. Sets, Gear Boxes, Fans, Pumps, Rotating, Centrifuge and Reciprocating Machines etc. in different Process Industries like Steel Plants, Thermal Power Plants, Textiles, Paper Mills, Automobile & Cement Plants.
- Insitu Dynamic Balancing of fans, Blowers, Rotors, Pumps carried out at various sites/rectification of the same.
- Envelope Method for bearing fault Detection.
- Phase Analysis.
- FFT Signature Curves, Details of Field Observations.
- Thermal Imaging carried out at various sites using Sophisticated Computerized Instruments and Software’s.
- Our Recommendations will help them to take action on the equipment only when it is necessary. This help them in Cutting Maintenance cost, improvement equipment reliability and also providing equipment life.
- Upto 40% savings in maintenance and inventory cost
- Discuss requirements of the client (internal/ external), analyzing the purpose of the job and working on the development of design ideas & fulfill our clients.
- Prepare sketches & layout diagrams, modifying & finalizing the same.
- In-depth knowledge of Microsoft Office 2007.
- Examine requirements documents and create technical design documents, unit test and implementation plans for complex projects
- Implementing & providing all kinds of support for applications & software
- Design and development of the vibration-severity diagrams, Analysis Report and Trend chart.
- Troubleshoot the Technical problems of the plant.
- Ensure maximum client satisfaction by providing pre/ post technical assistance and best services to the client. Suggest production methods, materials & maintenance costs for the equipment of the plant.

Title : PREDECTIVE MAINTENANCE & DESIGNS PVT LTD
Client : ALL SMALL AND GIANTS INDUSTRIES, PLANTS OF LOCAL LIKE Bhilai steel plant BHILAI, Jai Balaji DURG, Topworth Steel Power Ltd DURG, Neco Jayswal RAIPUR, Godavari Power & Steel Ltd RAIPUR, Jagdamba Steel & Power Ltd RAIPUR, Nalwa industries RAIGARH ,Prakash Industries CHAPA, Mahendra Stee l& Power ltd RAIPUR, Lafarge Cement, Ambuja Cement AND other state client such as Lloyds industries Ltd WARDHA , Indorama Synthetic (i) ltd NAGPUR,Ardent Steel Ltd KEONJHAR orrisa,Shree Cement Ltd Ajmer RAJASTHAN & Jai bala ji Mandideep BHOPAL, force motor and Volvo motor INDORE . Job done in steel industry, Automobile industry, cement industry, Power Sector, Textile industry, Paper industry and Chemical industry.
- Presently I am working in a BALCO aluminum ltd, Korba Chhattishgarh under hofincons as a condition monitoring engg.

[Guest]

RESUME
RAHUL SINDERIYA
Email : raul.1326 AT gmail.com

OBJECTIVE :
To make the best use of my acquired knowledge and skills with an opportunity to improve on the same, contribute to the growth of the organization and hence to play an active role in the expeditious development of the nation.

ACADEMIC PROFILE :
EXAMINATION BOARD YEAR OF PASSING PERCENTAGE INSTITUTION :
B.E (Electrical and Electronics Engineering) Deemed University 2008-2012 71% (Up to 6th Semester) VINAYAKA MISSIONS UNIVERSITY, (AVIT) TAMILNADU.
AISSCE (Science) CBSE 2007 69.2% Guru Nanak School, Ramgarh Cantt (Jharkhand)
AISSE CBSE 2005 75.6% Guru Nanak School, Ramgarh Cantt (Jharkhand)

COMPUTER SKILLS :
- PROGRAMMING LANGUAGES : Elementary Knowledge of C and C++
- SOFTWARE APPLICATIONS : MICROSOFT OFFICE
- OPERATING SYSTEM : Elementary Knowledge of WINDOWS
VISTA WINDOWS XP AND WINDOWS 7

AREAS OF INTEREST :
- Power system

EXTRACURRICULAR ACTIVITIES AND ACHIEVEMENTS :
- Participated in one day seminar on “ Recent Advances in Material Science” in AVIT
- Participated in the National Level Conference on “ New And Renewable Energy Sources” (NCNRES - 2011)
- Completed basic Japanese language course of duration one year
- Represented school cricket team in ” District Inter School Cricket”
- Had been worked as the house captain in the school for one year

PROJECT :
- Proposed project on “GSM CONTROL DEVICE”

HOBBIES/INTERESTS :
- Playing and watching cricket.
- Watching movies
- Reading books and newspapers.
- Computer games.
- Listening music
- Social networking

[Guest]

MOHAMMED SUHAIB (B.E Mechanical – 2011)
Email : mohammedsuhaib05 AT gmail.com
PROFESSIONAL OBJECTIVE :
Seeking entry level position in growth oriented organization where my skills and knowledge will be utilize effectively towards the goals of the organization and further build upon my experience to advance my career.

ACADEMIC PROFILE :
Qualification Details Year Of Passing % Marks
Bachelor of Engineering
[B.E – Mechanical] Anna University, Chennai
At : Arunai Engineering college, Tiruvannamalai 2011 76
Higher Secondary (12th) Tamil Nadu State Board
At : Mazharul Uloom Higher Secondary School, Ambur, Tamil Nadu 2007 81
SSLC 2005 81
TRAINED ON :
Tools Learned In Institute AUTOCAD, PRO-E , ANSYS and CATIA-V5 ( Basic )
Hands on Experience in the following workbenches under CATIA-V5 :
- Sketcher All types
- Part Design (Isometric Drawings) Ability to Read Drawings & Design 3D parts in Part Design
- Drafting Basic Drawings
- Sheet Metal Design Practiced to Design Folded and Unfolded parts
- Assembly Have undergone assignment in Shock Assembly and
Quick Acting Hold-Down Clamp
- Casting Practiced parts like joystick and Suspension
- Surface Have done assignments in Designing a” WATER BOTTLE”
AREA OF INTREST :
- Engineering Materials and Metallurgy
- Maintenance Engineering
- Design of Transmission Elements
PROJECT UNDER TAKEN :
Name of the Project : Fabrication of Reciprocating pump by pedal operation.
Description :
The basic principle of our project is that the cylinder is actuated by the pedal operation. The rotating movement is converted into reciprocating movement by the U-shaped link which is attached to the smaller sprocket. When the plunger gets reciprocated, suction takes place during forward stroke. During the return stroke the water which is sucked in, is delivered through the outlet port. A check valve is provided in both inlet and outlet sides to prevent the flow of water into the cylinder during suction stroke from the outlet side and vice versa. This project aims at lifting water to a higher level using pedal operation.
Name of the project : Automated checking of CRE (Cumulative Radial Error) for the pinion shaft.
Description :
The main principle of this project is that when two gears are rotated in tight mesh without play against each other, under the influence of pressure that is applied in the direction of the radial centre distance, atleast one left and right gear flank of the two gears are meshing(double gear flank method). This causes variations in the radial centre distance as the gears rotate. This variation in the distance between the centres of the two gears, is the cumulating effect of errors like :
- Run out error in the gear blank
- Tooth cutting error
- Tooth profile error
- Surface finish error like nicks or scratches on the gear tooth
EXTRA & CO-CURRICULAR ACTIVITIES :
- Participated in International Conference “NANO-10” project Expo in Arunai Engineering College.
- Also volunteered in various other related events in and off the college.
- Taken seminars in Unconventional Machining Process and Non Destructive Testing.
PERSONAL SKILLS & STRENGTHS :
- Comprehensive problem solving abilities
- Ability to deal with people diplomatically
- Excellent interpersonal and communication Skills
- Extremely productive in a highly stressed environment
- A very good team player
- Versatile and Resourceful

[Guest]

PRERANA BAGHEL
E-morienail : preranabaghel AT ymail.com , prerana.baghel AT gmail.com

Looking for a challenging career which demands the best of my professional ability in terms of technical & analytical skills & helps me broadening & enhancing my current skill & knowledge.

SYNOPSIS :
- B.E. (Applied Electronics & Instrumentation Engineering) from Chhattisgarh Swami Vivekananda Technical University, Bhilai.
- Successfully completed project work on “FOUR MODE TIMER” as a part of study curriculum.
- Keen interest in updating self about industry & economic trends in India as well as International Markets.
- Possess a flexible & detailed ted attitude. Adaptable and a quick learner.
- Acquire skills to work under pressure situations.

SCHOLASTICS :
B.E. (Applied Electronics & Instrumentation Engineering), RCET, Chhattisgarh Swami
Vivekananda Technical University, Bhilai 2011, 64.38%
XII Bhilai Nair Samajam Higher secondary School (CGBSE, Bhilai) 2005, 51.6%
X Bhilai Nair Samajam Higher secondary School (CGBSE, Bhilai) 2003, 64.67%

COMPUTER SKILLS :
Packages : MS Office (Word, Excel & PowerPoint)
Operating System : Windows XP & Windows 7,auto-cad
Languages : English

ACADEMIC PROJECTS :
Title : - 500-Watt MOSFET Based PWM Inverter
Duration : 3 Months
Team Size : 1
Description : Study about PWM Inverter, a device which by storing energy in a battery which is charged by electric supply, supplies power during power failure. This is done by converting DC to AC by various methods.
Title : Four Mode Timer
Duration : 3 Months
Team Size : 3
Description : Study about four timers which has inbuilt clock time which tracks over the real time. The main objective is to control and operate the four different modes of timer by a driver chip with the help of electrical circuits.

VOCATIONAL TRAINING :
1. Bhilai Technical Institute, Bhilai Steel Plant, Bhilai, (C.G.)
2. Bharat Sanchar Nigam Limited, Raipur, (C.G.)

EXTRAMURAL ACTIVITIES & ACCOLADES :
- Active member of Instrumentation Engineering association in R.C.E.T. Bhilai
- Won various awards for debates and elocution competition at school level.
- Won various prizes for interschool song and dance competition.
- Secured 1st position in General Knowledge competition.

[CHAUDHARI ASHVINKUMAR G]

RESUME
CHUDHARI ASHVINKUMAR GHEMARBHAI
( B.E MECHANICAL )
E-mail : cashvin27 AT gmail.com

CAREER OBJECTIVE :
To be part of a team that offers challenges to utilize and to enrich my knowledge.

ACADEMICS:
COURSE YEAR OF PASSING PERCENTAGE BORD:
B.E ( Mech ) JUNE- 2011 62 KSKV KUTCHH UNI
H.S.C 12TH MARCH- 2007 58 GHSEB
S.S.C 10TH MARCH- 2005 66.14 GSEB

INDUSTRIAL TRAINING :
- 20 DAY INPLANT TRAINEE AT BANAS DAIRY (PALANPUR)

EXPERIENCE :
COMPANY YEAR
B.K.DIST.CO-OP.MILK UNION LTD.(BANAS DAIRY)
PALANPUR, BANASKANTHA 27/8/2011 TILL DATE

WORK ABILITYS :-
HAVE RESPONSIBILITY OF PLANT AS AN PLANT ENGG. WORKING AS AN MAINTANACE AND OPERATING.
HAVE A KNOWLEDGE OF TBA/8 MACHINE WITH PULL TAB AND WITHOUT PULL TAB MACHINE.
HAVE KNOWLEDGE OF OPERATING AND MAINTANACE OF FLEX-10 , VTIS-10 , TCBP-70 M/C, TTS-51 M/c.
AM WORKING AS AN SHIFT INCHARGE . HAVE KNOWLEDGE OF QC RELATED PACAKING GOOD PRODUCT.
HAVE ABILITY TO WORK IN GROUP, TO HAVE MORE PRODUCTION WITH LESS WASTAGE SINCE FROM ERACTION TO COMMISIONING., HAVE ABILTY USE MINIMUN MAN-POWER AND TAKE OUT PRODUCTION WITH GOOD QUALITY

WORKING AREAS COVERED :-
TBA/8 MACHINE WITH PULL TAB AND WITHOUT PULL TAB MACHINE.
STERILIZER(FLEX-10 AND VTIS-10 WITH ALSAFE-LA TANK) MAITNANACE AND OPERATION
WORKING PLACE Banas Dairy is a very recent project by L&T engineers and is state of art dairy with the latest technology / Instrumentation. It is a continuous process Plant ,Using SCADA based PLC system. Equipped with smart field instruments the plant is automated by LADDER LOGIC Banas Dairy is having new plant of UHT in which VTIS(Vacuum direct Steam Inject Machine)-10 which is 1st in India. And have latest technology.

EXTRA CURRICULAR ACTIVITIES :
- VISIT IN INDUSTRIES - Panandro power plant, Sangi cement, banas dairy, indian Air force bhuj
- Participated - In Avishkar in management comity 2010

ACADEMIC WORK :
- SEMINAR WORK - Stirling engine is a heat engine operating by cyclic compressing and expansion of air or other gas, working fluid at different tempreture level.
- PROJECT WORK - Advance trolly cum crain handler is specially designed for road and railway travel performing lifting operations as well.

INTERESTED SUBJECTS :
- POWER PLANT ENGINEERING
- AUTO –MOBILE ENGINEERING

COMPUTER SKILL :
- Make 2D and 3D drawing in Auto-CAD, C++, Microsoft work, power point, internet knowledge etc.

STRENGTH :
- Honest and Hard working.

DECLARATION :
I here by declare that the above mentioned information is true to the best of my knowledge.
YOUR FAITHFULLY
CHAUDHARY ASHVINKUMAR G.

[Guest]

Sonik Rassewat
E-mail : sonuwatts1989 AT gmail.com

PROFESSIONAL PROFILE :
- Ability to do smart work.
- An effective communicator with strong interpersonal skills.
- Self Motivating and Adopt myself with changing environment.
- Strong analytical and team building skills with proficiency at grasping new concept quickly and utilising the same in a productive manner.

ACADEMIC CREDENTIALS :
Degree University Institute Year of Passing Percentage Division :
B.Tech. (Mechanical Engineering) RTU Swami Keshwanand Instt. Of Technology 2012 68.6 (Till VII Sem.) First
Senior Secondary Examination RBSE Dav school SGNR 2007 64.3 First
Secondary School Examination RBSE Little Star Children Sec. School 2005 71.67 First

PROJECTS :
- Working on the UTM MACHINE for shear test.

IT SKILLS :
- Familiar with MS Office Applications.
- Basic of C & C++.
- Familiar with CAD Software.
Auto CAD (Drafting)

TRAININGS and INDUSTRIAL VISITS:
- Industrial Visits :
Akshaya Patra Foundation, Jaipur. (III Sem)
R.S.Metal Pvt.Ltd, Jaipur. (III Sem)
Auto Lite, Jaipur. (IV Sem)
Suzlon, Vapi. (VI Sem)
Grow well industries, Vadodra. (VI Sem)
ONGC, Vadodra. (VI Sem)
- Industrial Training :
Summer Training at Suratgarh Thermal Power Plant, Suratgarh(Raj.)

EXTRA CIRCULAR ACTIVITY :
Event Coordination :
Chief Coordinator of “Pravah 2012” college annual fest.
Coordinator in ‘Machine Mania-Technical paper presentation’ in college annual fest 2010.
Event Coordinator in SLS ‘Oral Guard Paper Presentation’ in 2011.
Coordinator in National Conference on ‘Emerging Trends in Mechanical Engineering’ in 2011.
Chief Coordinator in Blood Donation Camp 2011.
Volunteer In Event ‘’KRISHNAM VANDE”.
Active member of ASME Club.

Workshops and Seminars :
Actively participated in ‘National Conference on Renewable Energy - Future Saviour of the world.
Participated in workshop named ‘AutoNEX’ related to automobiles and IC Engine.
Attended seminar on “BHAGWAD GITA” in 2010.

Competitive Exams :
Qualified in GATE 2012.

[Unregistered]

RESUME
VIPUL KUMAR
Email ID : vipulbihari AT gmail.com

CAREER OBJECTIVE :-
I want to work with orginazation where my talent & skills and be utilized and it’s more.
I grow with the growth of the company.

STRENGTHS :-
Energetic, punctual, hardworking ,efficient, loyal to work, honest
Good leadership,core knowledge, self-motivated.

PROFESSIONAL QUALIFICATION :-
Final Year bachelor degree in Mechanical Engg. from Surya Group of Institutes affiliated to Punjab Techanical University (jalandhar)

ACADENIC QUALIFICATION :-
B.TECH 2009-13 Mechanical Engg Punjab technical University (Jalandher)
XII 2008 Bihar School Education Board Patna
Matric 2005 Bihar School Education Board Patna

TRAINING AND CERTIFICATE :-
45 Days in Tata motors workshop
6 months in Speedcrafts Limited

PROJECT :-
C.T.H. Machine in B-Tech
Auto Air Filling Machine
Diesel Road Roller Machine

COMPUTER SKILLS :-
Catia,Auto Cad
Basic computer knowledge.
Internet.

PERSONAL QUALITIES :-
Favourite Person – Everyone
Strong Point – My learning and the willingness to learn. To try to convert knowledge inti wisedom.
Weak point –Patience , keeping calm in tough times , overtaly emotional

HOBBIES :-
Internet surfing, Travelling ,Playing cricket and Watching movies

LANGUAGES KNOWN :-
English
Hindi

PERSONAL DETAIL :-

Father’s Name : Sh.SHAILENDRA SINGH
Mother’s Name : Smt. MEENA DEVI
Date of Birth : 15/02/1990
Nationality : Indian
Marital Status : single
Gender : Male

DECLARATION :-
I hereby declare that all the statements made in this resume are true, complete and correct to this my knowledge and belief.

Date :
Place :

[Unregistered]

Resume
RAJESH KUMAR SHARMA
E-mail : rajesh.tata88 AT gmail.com

Objective :
To build a carrier that allows me to be compatible in any competitive environment and also boosts up my capacities, knowledge and energy to their positive full and a drive for self improvement with sincerity, dedication and smart work.

Synopsis :
** Can work well under pressure and communicating ideas clearly and effectively
** Quick learner and team player with strong relationship building & interpersonal skills.
** Endowed with good analytical, problem solving & organizational abilities.
** Dedicated and highly ambitious to achieve personal as well as the organizational goals.
** Looking forward for a position where I can maximize my skills, project management, leadership skills, and create new and exciting ideas.

Academic Credentials :
Graduation : B.E. (Mechanical), ANNAMALAI UNIVERSITY
SEMESTER I &II III IV V VI VII VIII OGPA
CGPA 7.84 8.13 8.64 9.13 8.97 9.67 9.5 8.98

SCHOOLING :
EXAMINATION BOARD YEAR OF PASSING MARKS OBTAINED :
SENIOR SECONDARY JAC 2007 64%
HIGHER SECONDARY JAC 2005 64.8%

Technical proficiency :
SOFTWARE EXPOSURE :
** AUTO CAD
** CATIA
** M.S.OFFICE

Industrial training :
NAME OF THE INDUSTRY DURATION :
TATA (TUBE DIVISION) 30 days
TINPLATE COMPANY OF INDIA LTD. 15 days
TATA MOTORS 15 days

Now working in TEXMO AQUA SUB ENGINEERING,COIMBATORE,TAMILNADU
Position : graduate trainee engineer
Dept : production (foundry division).

Project :
TITLE : INFLUENCE OF SPOT WELDING PROCESS PARAMETERS ON QUALITY CHARACTERISTICS OF DUAL PHASE(DP 980)STEEL JOINTS.

Personal Dossier :
Father’s name : RAMESHWAR SHARMA
Date of Birth : 23rd october 1988
Sex : Male
Marital Status : Single
Nationality : Indian
Linguistic Abilities : English, Hindi
Special Interest : Listening to Music, gaming, Playing cricket and chating.

Declaration :
I hereby declare that the above written particular is true and best of my knowledge and belief.
DATE :
PLACE : Jamshedpur
rajesh kumar sharma

[Unregistered]

CURRICULAM VITAE
SURENDRA SINGH
E-mail :sukiran43 AT yahoo.com

Objective :
Intend to build a career with leading corporate of Hi-Tech environment with committed and dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging environment.

Professional Qualification :
** Bachelor of Technology in Mechanical Engineering from Maharana Pratap Engineering College, Kanpur Affiliated to Utter Pradesh Technical University Lucknow passed with aggregate 70.2% marks in 2004.
** MBA from IGNOU on Operation Research in 2012.
** Completed 02 Semestor of M.Tech.(Thermal Engg.) From K.S.O.U.Banglore.
** Diploma in Mechanical Engineering, secure 80.60% of marks from Feroze Gandhi Polytechnic, Raebareli in 1997.

Academic Qualification :
** High School in 1991 from U.P. board .
** Intermediate in 1993 from U.P. board .

Experience details :
(Total Experience : 10+ years)
Current Employer :
Jaypee Fertilizer and Cement Ltd, Kanpur (Former, DUNCANS Fertilizer Division)
Engineer-1 (Maintenance) (from March’2011 to till date)
Presently, an active crew member of revamping team for re start up of Ammonia and Utility Plants. Actively performing the revamping of Heavy Rotary and Stationary equipments related with Ammonia Plant with proper inventory management.
Handling maintenance of all types of High pressure Pumps, Centrifugal & Reciprocating Compressors, Steam turbine, Fans, Furness, vessels, Heat exchangers, Cooling Towers, Water treatment Plant, Mechanical Seals, Reformer, Waste heat recovery boiler, Ammonia Converter & high pressure Pipe lines.
Firmly engaged with NG conversion project job associated with Casale USA and Energy Saving project from Naptha to NG.

Previous Employers :
RADICO KHAITAN LTD. (UNIT OF RAMPUR DISTILLERY), RAMPUR,
Sr. Engineer (Mechanical Maintenance) From Feb’2008 to March’11
Maintenance of Reciprocating compressors, all types of pump, various types of Reactors (Fcc type, fixed bed type), Distillation column, Cooling tower, Heat Exchangers, Centrifuge, various types of Valves, & High Pressure Piping, Biogas Twin Lobe Blower, clarifier, Digesters, Vacuum Pump, DM Plant, process air compressor, safety air compressor ,dryers including total utility handling incl. Boiler (Husk & Biogas Fired) Reduction of Break Down hours and frequency (Improvement in MTBF & Reduction in MTTR)
** Cost reduction through Value Engineering & Import substitution
** Reduction of Maintenance Cost
** Improving the availability of Machinery & Equipment
** Planning shutdown maintenance & overhauling (resources v/s time)
** Conceptualizing and implementing improvements for maintenance-elimination.
** Fool-proofing for quality improvement
** Knowledge of Why- Why analysis, TPM, TQM, ISO9001 : 2000, ISO14001: 1996 & 5S
** Basic exposure to SAP-PM module
** Ability to interpret mechanical drawings
** Forecasting spares requirements

Jubilant Organosys Limited (Gajraula), J.P.Nagar
Sr.Engineer (Mechanical Maintenance) from 27 July 2006 to 31 Jan 2008
Handling the maintenance of Plant including manpower handling & coordination with process department related to plant’s day-to-day maintenance & shut down maintenance activities.
JOB RESPONSIBILITIES :
** Maintenance of Reciprocating compressors, all types of pump, various types of Reactors (Fcc type, fixed bed type), Distillation column, HOT Oil Furnace, Cooling tower, Heat Exchangers, Centrifuge, various types of Valves, & High Pressure Piping, Chilled water unit, Brine compressor, process air compressor, safety air compressor ,dryers including total utility handling.
** Commissioning of New Equipments in Plant, Commissioning of New Plants for Intermediate Pharma Division.
** Direct & Indirect (Contractual) Man Power Management & Also responsible for Ensuring Safety of Man & Machine.
** Smooth Functioning Of TPM & Ensuring Velocity in the Direction of Zero Incidents.
** Coordinating Process Personnel for Zero breakdowns & Minimal down Time.
** Imparting Training to Man Force & Maintaining harmonious Relations among Team Members.
** Preventive Maintenance & Conditional Monitoring for Minimal breakdown.
** Coordinating Internal IMS Audit.
** Material Management through Maximo Software.

DUNCANS INDUSTRIES LIMITED (FERTILISER DIVISION), Kanpur
Engineer- Mainteance (Ammonia & Utility) From 27thJuly, 2004 to 20 July 06
Duncans Industries Limited (Fertiliser Division) is operating 1335 TPD ICI (UK) Naphtha Based ammonia plant & 2250 TPD Mitsui toatsu total recycle C Process (Japan).
Responsibility : Supervising shifts activities as shift in charge including shift manpower handling & coordination with process department related to plant job as a Maintenance Engineer.
Some of the important features of my experience are :
** Pre commissioning / commissioning of the Ammonia & Utility plant.
** Maintenance of Syn Gas Reciprocating compressors (suction press. At 22 kg/cm2 & delivery at 365 kg/cm2), Process Air Centrifugal Compressor’s (suction at atmospheric press & delivery at 30 kg/cm2) ,Reciprocating Compressors for Instrument Air, Ammonia Storage Compressors, Nitrogen Compressor, Crack Gas Compressors, Nitrogen Generator, Crackers, Water Treatment Plants with Clariflocullator, Cation and Anion Tanks, D.M. Water plant, Lean and Semilean Pumps of centrifugal type, Reformers (having temp. more than 900 °C), Methanators, Howden (Refrigeration) Compressors, Fire Fighting pumps, Acid pumps, 3 no. Cooling Towers with their Fan & Pumps, Various types of Heat Exchangers i.e. Shell & Tube type and Plate Type and Boilers, Catch pots, Manzel Lubrication systems, F.O.L System of Gear type pump, various types of pumps i.e. centrifugal, reciprocating, Plunger type maintenance with their spares i.e. Mechanical seal, Gland Packing, Impeller assembly, Bearings i.e. Antifriction and Journal types, Casings, Shaft Deflection, Alignment, Routine Maintenance, Pre Sulfur Removal Plant, All Types Of Valves i.e. gate ,globe ,angle, foot Butterfly, Diaphragm, Needle , High press valves, I.D. and F.D. Fans, Blowers for different purposes, Fans, Material Handling systems i.e. Conveyer and Bucket Elevator, Offsite Maintenance with their Various Spares with Successfully Handle the Manning in Shifts.

Indian Coast Guard : (Working Exp.- 02 Years)
Training & Working in & as an Engine Room Artificiar dealt with Marine Engines i.e. MAN , PIELLESTIC, RADIAL, 40 DM, KIRLOSKAR engines Maintenance and Air condition, R.O. Plant, compressors, ship steering, D.G. set with Engine Overhaul Maintenance from 27th July’98 to Sep’2000.

Software Proficient With : MS Office, Auto CAD 2002, Maximo, SAP R/3

Extra Curricular Activities :
I actively participated in various games and athletics at university level.
I achieved “B” and “C” certificate of N.C.C.

Personal Profile :
Date of Birth : 2nd Jan 1977
Marital Status : Married
Language Known : Hindi, English
Nationality : INDIAN

Date : 08.06.2013
Place : KANPUR (U.P.)
(SURENDRA SINGH)

[rakeshutla.mech@gmail.com]

RAKESH RAJAIAH UTLA
Email : rakeshutla.mech AT gmail.com

Dynamic Assistant Manager–Projects with 5year 10 month Experience in Rubber Chemical &Paint Industries , aspiring a career in growth Oriented Organization to utilize acquired skills and apply knowledge & experience in achieving Organizational Goals attaining Personal and Professional growth

Seeking a challenging Managerial Assignment in… Manufacturing/Oil&Gas/Petrochemical/Pharma/ Rubber Chemicals/Paints &Powder Coating

Personnel traits :
** Adaptability to perform in new Competitive Environment.
** Work well in both Team and Individual Assignments.
** Analytical mind, Quick Learner & Solution provider

Professional Experience :
** Jotun India Private Limited ,Pune(Landmark Norweigian based Paint & Powder coating MNC industry)
** Nocil Limited (Navi Mumbai) and PIL Chemicals Private Limited (Vapi) (Landmark Rubber chemical industry dealing with Antioxidant Accelerator,Inhibitor mainly supplied to Tyre manufacturing industries & Rubber related industries).

Professional Synopsis :
** Assistant Manager- Projects Jotun India Pvt Ltd,Pune( since Nov12 )
** Senior executive- Engineering ( Projects) ( April 2011 to Oct 2012)
** Executive- engineering ( Projects) ( Jan 2008 to April 2011)
** Management Trainee (01 August 2007 to 31 December 2007)

Job Profile :
** Project(Man,Material,Money,Method,Machine,Measurement)
** Concept to Commissioning Phases of Project
** Engineering ,Planning ,Budgeting ,Procurement & Execution
** Client/ vendor/Engineering items finalization
** Conservant with(Geomatry) G’s of welding(Plate,Structure & Pipe)
** Conservant with Quality Assurance plans(Qualityof Design,Quality of Conformance, Quality of performance)
** Conservant with Six Sigma Tools (DMAIC- Define,Measure, Analyse,Improve &Control)
** Conservant with Failure Mode effect Analysis generating Risk Priority Number(Severity X Occurrence X Detection score)
** Conservant with 5 Whys, Lean Manufacturing(Value Analysis/Value streamMapping,TIMWOOD(Transport,Inventory,Movement,Waiting,overproduction,overprocessesing, Defects/Right first Time)
** Qualitycontroltools(Controlcharts,ParetoAnalysis,FishBoneDiagram,Histogram, Scatter Diagram, Graphs, Checksheet,Flowchart)
** Conservant with 5S(Seiri,Seiton,Seiso,Seiketsu,shitshuke)techniques
** Liason with MIDC, MPCB ,MSEB ,DISH ,DoE(CCOE)/PESO

Achievements :
** Hands on experience on Utilty, Chemical Process ,Paint & Powder Coating Equipments
** Energy saving projects on Pumps,Compressors,Cooling Tower,Boiler etc. saved upto 10 lacs
** Solved reactors vibration problems, saved downtime of 100 hrs
** Diesel Generator(310 kva Kirloskar Make)Erection& Commissioning
** Worked on Spare Management under inventory control scheme
** Project Management of 200crore at PIL & NOCIL Chemicals ( Civil, Mechanical, Electrical & Instrumentation)
** Warehouse (RM & FG) &Production House Fireproof Design as per DC Rules, Factory Act &NBC Codes & Racking Design
** Material Handling Layout Design & Related Equipment selection
** Fire cum Smoke Alarm & Detection system, FM 200(Server Room),Fire Fighting system, Vezda System, LPG Gas Detection system, Ammonia , Fume & Dust Extraction system
** CCOE(Solvent A/B/C) , FIRE NOC, BCC ,Consent to establish & Operate, Excavation Certificate Approval, Stability certificate
** ATEX Standards ,Zone & Group Classification( Gas & Dust ),NFPA
** Automation( PLC) Basics, HVAC System ,Roof Extractor Design
** Lab Equipment & Measuring Instruments Selection.
** Transformer Design, Fault current , Power & Control cables selection PCC&MCC
** Harmonic Filter/Capacitor Bank, Single phase system & Three phase system, LT & HT , 400v TN-C-S( Buildings), 690v TN-C-S

Trainings Attended :
** ‘ Self Empowerment’ by Paradigm unlimited ,Mumbai
** ‘Engines & Transmission system’ at Western coalfields limited , Chandrapur .
** ‘Power Plant Training’ by NPTI, Nagpur.
** ‘Supervisory skills development’ by Paradigm unlimited ,Mumbai

Educational Qualification :
** Degree course in Mechanical Engineering Certified by R.T.M. Nagpur University with 69.8 % of marks
** Schooling & Under Graduation at Mount Carmel Convent Higher Secondary School & Junior college with an Aggregrate of (X th- CBSE Board – 79.2%) & ( X IIth – HSC Board-75.67 %)

Projects Undertaken :
** ‘Solar & Wind operated (hybrid) power plant ‘for domestic houses.
** ‘Wood Turning Lathe Machines upgradation’ Case study at Bapurao Deshmukh College of Engineering , Workshop , Wardha
** ‘Coin Operated Horse’ Mini project as an application of Four bar mechanism
** ‘Advanced Manufacturing Technologies in small & medium scale Enterprises’

Software Skills :
** MS Office
** Autocad
** MS Primavera
** MS Project
** Oracle
** Lotus Notes

Other Activities :
** MPESA member ,B.D.C.O.E, Wardha
** Member of National service scheme Club
** Singing, Drawing, Dancing, Reading( Technical & Non Technical)

Lingual Skills (Spoken and Written) :
** English
** Hindi
** Telugu
** Marathi

Personal Details :
Date of Birth : 11th July 1985
Gender : Male
Nationality : Indian
Current CTC : 8.8 lacs per annum
Expected CTC : 12 lacs per annum ( Negotiable)
Notice period : one month

[Unregistered]

Curriculum Vitae


Sudhanshu Kumar verma
sudhanshuskv AT yaho.com
Verma_sudhanshu AT hotmail.com

Objective : A dynamic result oriented mechanical engineer willing to work in a challenging professional environment for mutual growth at . Middle management position.

Functional Area : Project & maintenance.

Achievement :
1) Effectively commissioned steel plant equipment & machine shop equipment in Rivolta auto industries (Indore), Soni Ispat ltd(Indore), BRG Iron & Steel Co(Angul, Orissa), Tayo Rolls Ltd.(Jamshedpur)
2) Expertise in effective project management system, root cause analysis of failure, minimization of MTTR, Schedule maintenance activities like CBM,TBM, Autonomous maintenance. TPM Activities (as a P.M. pillar member). ISO documentation & implementation. Condition monitoring, spare management,

Work Experience :
Total 15 years in various field of mechanical engineering ( 10 Years in S.M.S project & maintenance., 3 years in CNC machine shop for automobile industry, 2 years in machine tools design &development) Thorough in Erection, commissioning & maintenance, .Arc furnace, Induction furnace, ladle refining furnace, Heat Treatment Furnace, Metal refining convertor, L.P.G bullet, Fumes extraction system, Water complex (capacity 3000 KL), Pumps, Cooling tower, L.P.H.P. compressors & its pipe line, Boiler (12TPH), 5 axis CNC milling, Lathe,&, conventional machines like lathes, milling, grinding, chill boring, radial drilling, E.O.T cranes up to 70T SWL, material handling equipment & hydraulic system.

Carrier growth :
Present employment : Gontermann-Peipers (India) Ltd. Since nov:2012
Position : Senior Manager Maintenance Planning & control.
Responsibility : Planning & monitoring of planned maintenance activities, ( PM,TBM,CBM), major overhauls, of melting & its utility, foundry,& machine shop, minimization of inventory cost.

1)Jamshedpur engineering & machine manufacturing company ( A subsidiary unit of TATA STEEL)
Position : Deputy Manager Maintenance. From june 2011 to oct 2012
Responsibility : Looking after whole the maintenance activity of melting (EAF,IMF), foundry , machine shop & its utility of mechanical maintenance

2) TAYO Rolls Ltd. Jamshedpur, (A roll manufacturing company having own integrated steel melting shop) from 25/11/08 to April.
Position : senior officer (Steel melting & foundry shop)
Responsibility : Independent responsibility for the maintenance of 25 T EAF ( NISHI Make), Ladle Furnace, Vacuum de-gasifier, Heat Treatment furnace ( Oil fired & gas fired) Induction furnace (medium frequency & main frequency) & its accessories for casting ( pit side) & Foundry division i.e. sand plant, horizontal centrifugal casting, vertical static casting, chill boring m/c.

3) BRG iron & steel co. (Orissa) from 11/9/06 to 23/11/09
Position : senior engineer (project & maintenance)
Responsibility : Maintenance of Induction furnace EOT cranes (70T SWL to 20T SWL) FES, Material handling equipment, Hydraulic system. Handled the project of water complex, pipe line, F.E.S. system(including force drop cooler & duct line), EOT cranes up to 70T, AOD(35T with top lance attachment, Induction furnace 7T to 20T capacity (Electrotherm & Megatherm). Vessel pre heater, ladle pre heater, transfer trolley, Modification, erection& commissioning of 11S GEC arc furnace into L.R.F. Complete overhauling & erection done of 11SU electric arc furnace with DRI feeding system.

4) Senior engineer project & maintenance in Soni Ispat Ltd. (Pithampur, Indore) from 15 June 2004. To 8 Sept 2006.
Responsibility : Preventive & Break down maintenance Induction Furnaces, 20 Ton / 6000 KW of Electrotherm Make complete with its associated equipments, Conversion of GEC 11 S Model Arc Furnace into LRF of 20 Ton, complete installation and commissioning, A.O.D. metal refining converter, Utility equipments viz. EOT Cranes, Ladle Pre-heaters, Transfer Trolleys, Pump House with Cooling Towers, Water Softening Plant and Water Treatment Plant.

5) works in-charge in Rivolta Auto Industries Pvt. Ltd. (an ancillary unit of EICHER Motors ltd., involved in machining of auto comp like crank case, cylinder head), from Jan 2001 to June 2004.
Responsibility : Down time minimization, Quality Development of new product, PPAP documentation Quality & Quality system audit continual improvement, using tool like SPC, 5S, JIT (just in time manufacturing) T.P.M. (Implemented ISO 9001 – 2000)
Major component handled : 4 cylinder & 6 cylinder Crank Case for EML., Lancer cylinder block , Indica Cylinder block , Inlet & Exhaust Manifold , Steering Knuckle .(Instrument : 2D CMM.)
Maintenance : Alignment & inspection of 5 axes Horizontal machining center Preventive & Predictive. Break down maintenance of 5 axis C.N.C. machine. & conventional machine like lathe. Milling. Drilling Break down minimization (USING QMS)

6) Engineer trainee in Yash Engineers (Pune)22nd Jan 1998 to Jan 2001
Company Profile : An organization involved in manufacturing special purpose machine like, Drilling, Greasing, Deburring, Hydraulic power pack & conveyors.mainly for auto industry.
Responsibility : Supporting manufacturing department, Inspection of incoming tools, & hydraulic system.

Computer proficiency : Auto CAD , MS Office

Educational qualification : B.E. (Mechanical) ( 1998)

Personal Details :
Fathers Name : Ashok Kumar Verma
Date of Birth : 02 / 01 / 1971
Marital status : Married
Dependents : 3

Date :
Place : Kolkata Sudhanshu Kumar Verma

[Unregistered]

CURRICULAM VITAE
RITLAL MAHTO
Email :raj.ritu991 AT gmail.com

Personal Data :
Date of Birth : 16sept 1991
Sex : Male
Nationality : Indian
Status : Single

Languages Known :
** English
** Hindi.

Interests and Hobbies :
** Playing football
** Listening Music
** cooking

Career Objective :
To gain knowledge and skills in the technical field and in the process profit the organization for which I am working.

Acadmic Educational Qualification :
Examination Institution/Board Duration % Marks :
B-TECH (mech engg) RTC INSTITUTE OF TECHNOLOGY ORMANJHI ANANDI RANCHI 2009-013 upto-7sem 66
12th (I,Sc.) MARWARI COLLEGE RANCHI 2006-2009 52
10th B.S HIGH SCHOOL GINJO THAKUR GOAN RANCHI 2005-2006 70

Extra Curricular Activities :
** Industrial Training in ttps lalpania bokaro.
** Training in HEC.
** Training in hydel power plant sikidiri.
** Advanced diploma in computer application.
** Project-performance analysis of bio-diesel engine.

Area of Interest :
** Iron and steel manufacturing.
** Power plant
** Automobile industry

I hereby declare that the above information is true to the best of knowledge.
PLACE :
Date :
Signature