www.alcorinfotech.com Alcor Infotech Pvt Ltd Pune : Electronic Design Engineer

[STSRekha]

Company Name : Alcor Infotech Pvt Ltd
Company Location : Pune
Designation : Electronic Design and Applications Engineer

Contact us :
Alcor Infotech Pvt Ltd
Sai House, 17/7, Karve Road, Erandwane
Pune, MH 411004
India

Design and Applications Engineer (L1)
Purpose :
This job position is specifically targeted for fresh engineers who are willing to enter the cutting edge field of Electronic Automated Test Equipment manufacturing.
The position gives fresh engineers an opportunity to gain experience is Hardware Design, Software design and Design for testability.
Qualification :
· B.E. Electronics & Telecom or Instrumentation
· Good understanding of Basic hardware design
· 0 to 3 years experience in related industry
· Good interpersonal skills
· Proficient in Spoken and Technical use of English
Responsibilities :
The candidate will be provided on job training and will be a contributing member of the design and test development team.
The candidate will be responsible for :
· Running experiments on Lab bench using basic measurement instruments
· Collecting and analysis experimental data
· Writing test programs in C/C++ or C#
· Reporting results to the engineering team lead and project manager

How to Apply :
Application Requirements :
The following information should be furbished with an interview application
Latest resume (pdf format)
Scanned copy of mark sheet for TE & BE
Copies can be mailed to the below mentioned address or email to hr@alcorinfotech.com

Web : http://www.alcorinfotech.com

General Instructions :
1) This is a job in Alcor Infotech Pvt Ltd at Pune for the post of Electronic Design and Applications Engineer.
2) For more details refer to the company website.
3) You can send resume / CV to the company's email address.
4) Source of the information is the company website / internet on the date of publishing.

[Guest-IJT]

Name : Prasanth V
Email : prasanthvkadoor AT gmail.com
Designation / Skillset : Electronics engineer
From :
Prasanth V

To,
HR Manager,
Sub : Regarding Training in your organization.
Respected Sir,
I am B.E. Eletronics & Communication Engineer. Iam looking forward my future in Electronics industry.
I can utilize my technical abililities for your an organization like your terms. Enclosing my Resume for your kind consideration.
Hope to receive favorable response from your side.
Thanking you,
Yours faithfully,
Prasanth V

Resume :

CAREER OBJECTIVE
To secure a challenging position where I can utilize my skills and abilities to the fullest for the growth of the organization while being resourceful, innovative and flexible and also to gain more knowledge and skill.
ACADEMIC PROFILE
Year of completion
Class Board/ University Name of the Institution
Percentage
2010 B. Tech in Electronics & Communication M.G.UNIVERSITY,
KOTTAYAM
Amaljyothi College of Engineering ,Kanjirappally, Kottayam. 63.15%
2007 3 year DIPLOMA in Electronics. BOARD OF TECHNICAL EDUCATION Govt.Polytechnic college, Vechoochira,kerala 68.04%
2004 XII KERALA
CMS HSS,Mallappally 63.166%
2002 X KERALA
St.George high School, Kottangal 74.166%
COMPUTER SKILLS
- Platforms Windows 98/XP/Vista/Seven
- Languages C,C++
- Packages Microsoft Office
HOBIES & INTERESTS
- Listening to music
- Driving, playing football & volleyball.
HARDWARE SKILL
- Microcontroller Atmel 89c51.
MAIN PROJECT
Title : DALI system (Digitally Accessed Light Interfacing system). [ The Digitally Accessed Light Interfacing system is used for the controlling of lighting systems in building. A DALI lighting system can report the level of illumination of that area by light sensors and the status of every ballast and lamp. This system enables individual control over the load]
[IN DIPLOMA] Title : TRAX (Tele Remote Access).[this project is designed to connect an ordinary analog telephone line parallel to control various electric equipments.]
MINI PROJECT
Title : AUTOMATIC TEMPERATURE SENSING SYSTEM.[ Automatic weather sensing system senses weather conditions and operates electrical appliances as we needed. Detectors detect the changes of the climate and take action precisely by the help of microcontroller program]
SEMINAR
Title : AUDIOSPOT LIGHT [Audio spot lighting is a very recent technology that creates focused beams of sound similar to light beams coming out of a flashlight. By shining sound to one location, specific listeners can be targeted with sound without others nearby hearing it.]
[IN DIPLOMA] Title : Nano Electronics [Miniaturisation of electronic devices is happening in the electronic industry since the invention of transistor and recently with the help of nanotechnology]
STRENGTHS
- Enthusiasm in team work
- Willingness to learn
- Hard working
WORKING :
Now working in Anjani Telecoms,Vashi, Mumbai as Telecom Engineer and doing some network trouble shooting jobs.
Current salary : 5000
DECLARATION
I, PRASANTH V, hereby declare that the information furnished above is true to the best of my knowledge.
Yours Sincerely,
Date : -07-2011
(PRASANTH V)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4447418
Date & Time : 5th Aug 2011 4:33 AM (UTC)
IP Address : 115.112.230.210
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Predicted Country ;: India

[Guest]

CURRICULUM VITAE
DESALE AMOL PRAMOD
Email –
desale_amol87 AT rediffmail.com /
desale.amol87 AT gmail.com
OBJECTIVE :
Aiming to work as a mechanical engineer in an organization which strives for quality and innovation. I want to work where there is ample scope to demonstrate my skills and where at the same time learning will be a continuous process.
EDUCATION :
B.E. (Mechanical) Year of passing :- 2009-10
ASSET :
- Highly motivated to work as a team.
- Leadership qualities.
- Highly adaptive to new things.
EDUCATION :
Examination Institute Board/University Percentage
B.E. ( Mech)
Final Year
S.V.I.T.,Nashik
Pune
First class
H.S.C
K.T.H.M college, Nashik
Nashik
Higher Second class
S.S.C
K.B.H. Vidyalaya,Nashik
Nashik
First class
COMPUTER SKILLS
- AUTO CAD
- OPERATING SYSTEM KNOWN WIN 98 & WIN XP.
- MS OFFICE.
- ERP SOFTWARE
AREA OF SPECIALIZATION
- HAS COMPLETED PG DIPLOMA IN “BOILER & PROCESS EQUIPMENT DESIGN & ENGINEERING” FROM ”ASIAN ACADEMY OF PROFESSINAL TRAINING”.
- BASIC KNOWLEDGE OF “ PV-ELITE SOFTWARE”.
PROJECT :
- “Mass Inertia Drive” :- (BE Final Year)
ORGANIZATIONAL EXPERIENCE :
- DURATION : - 9 th JULY 2010 TO TILL DATE.
- DESIGNATION : - DESIGN ENGINEER.
ORGANIZATIONAL PROFILE :

ORGANIZATION : - GURUKRUPA ENGINEERS PVT. LTD. PUNE.

A ORGANIZATION DEALS WITH DESIGN & FABRICATION OF VARIOUS PROCESS EQUIPMENTS LIKE PRESSURE VESSELS, HEAT EXCHANGERS, REACTORS, STORAGE TANK, AGIATATORS ETC.THE MAJOR CLIENTS INCLUDE ALFA LAVAL (I) LTD., PRAJ INDUSTRIES LTD., THERMAX LTD., THYSSENKRUPP INDUSTRIES LTD, IDMC LTD., EMCURE PHARMACEUTICALS LTD., NEELA INDIA PVT. LTD. ETC.AND CHEMICAL & PHARMACEUTICAL COMPANIES SUCH AS DEEPAK NITRITE LTD., WOCKHARDT LTD., EMCURE LTD.
RESPONSIBILITIES :-
- FAMILIAR WITH ASME SECTION VIII ; ASME SECTION II & TEMA ETC.
- PREPRATION OF” BILL OF MATERIALS”.
- BASIC DESIGN OF PRESSURE VESSELS,HEAT EXCHANGERS,STORAGE TANKS ETC .( SIZING,THK.CACLCULATIONS ETC.)
- ABILITY TO READ THE DRAWINGS ; NOZZLE ORIENTATION; NOZZLE ELEVATION & NOZZLE PROJECTION.
- GIVING LAYOUTS TO SHOP FLOOR SUCH AS PLATE CUTTING LAYOUT; DEVELOPMENTS OF CONE; TRANSITION PIECE; MITER BEND ETC..
- FREQUENTLY COMMUNICATING WITH CLIENTS.
- PRODUCTION PLANNING & CONTROL & PREPRATION OF BAR CHART.
- GET THE DRAWING DONE FROM DRAUGHTMEN & CHECK THE SAME.
- RECEIVING & REVVIEWING ENQUIRIES FROM CUSTOMERS.
- PREPARING SALES ORDER FOR ORDER RECEIVED.
- CAN HANDLE THIRD PARTY INSPECTION SUCH AS TUV; BV & APG ETC.
- PREPRATION OF QUALITY RELATED DOCUMENTS.

[Guest]

CURRICULUM VITAE
Desale Yogita P.
Email –
desaleyogita AT gmail.com
Objective :
Seeking a position to utilise my skills and abilities in the Electronics and tele- communication that offers professional growth while being resourceful, innovative and flexible.

Education :
B.E. (E&TC) Year of passing :- 2009-10
Asset :
- Highly motivated to work as a team.
- Leadership qualities.

- Highly adaptive to new things.
Education :
Examination Institute Board/University Percentage
B.E. ( E&TC)
Final Year
M.E.T.,Nashik
Pune
66.60%
H.S.C
K.T.H.M college, Nashik
Nashik
65.17%
S.S.C
K.B.H High School
Nashik
76.45%
ORGANIZATIONAL PROFILE :
ORGANIZATION : - Eaton Industrial Systems Ltd.
The MNC Company is manufacturing Engine valves for OEM like Ford & Chrysler. The company is equipped with Forge shop m/c shop and Heat treatment shop including spm like friction welding, induction hardening & PTA Welding m/cs.
ORGANIZATIONAL EXPERIENCE :
- DURATION : - 21 th Sep TO TILL DATE.
Responsibilities :
- Planning & executing predictive & preventive maintenance of plant equipments & utilities to enhance the equipment reliability & increasing m/c uptime.
- Planning & proper utilization of the resources (man, m/c, tools & materials) to achieve long term objectives
- As a TPM Team member responsible for TPM activities in planned maintenance,
Kaizen activities as well as participation in lean tools like VSM, Error Proofing etc.
- Executing maintenance consumable & non consumable spare budget & planning.
- Taking corrective actions to keep machines up so that overall MTTR & MTBF of the Unit are improved
- Data collection, its analysis & implementation of preventive maintenance to avoid similar failures in future.
.
AREA OF WORKING :
- Breakdown & preventive maintenance of National make 700T Extrusion press, Russian make 250T Electrical screw press, Hassenclever make 170t press.centreless grinders (Microsa, scarlo, jotes etc.)
- Preventive & predictive maintenance of cnc (Fanuc, Siemens series) m/c & spare control for the same.
Key Skills
- Has completed the workshop of embedded system
- Participated in TPM activities as a team member in our company.
- An internal Auditor for 5`S.
- Attended In-house Training of “, IC engine valve and 7QC Tools”.
- Audity for TPM
- Attended the training of LOTOV & implemented it.
- Participated in Kaizen activity
- Champion of two elements (LOTOV/Energy safe work processes) of MESH.
- Working on “PEOPLE (Productivity, Employee Engagement, Organizational Capacity, Learning, Employee Recognition)” Project.
Computer Skills
- Operating System known Win 98 & Win XP.
- C programming.
- Knowledge of embedded system.
- Knowledge of oracle.
PROJECTS :
- “REMOTE TEMPERATURE CONTROLLING USING GSM MODEM” :- (BE Final Year)
DESCRIPTION :
The main objective of the project Remote Temperature Controlling Using GSM is that it will continuously monitor the temperature. If the temperature is not within the specified limits the immediate controlling action will be taken. That means if the temperature is above the specified limits then fan will be turned on. If the temperature is above the specified limits then heater will be turned on. This change in the temperature is immediately conveyed to the concerned authority using SMS using GSM modem.
- “DOOR DEFENDER” :-( T.E )

DESCRIPTION :
Door defender is a simple circuit which helps to monitor opening and closing of door .the circuit is base on reliable reed switch and magnet method.It tells us whether the door is opened or closed and arming sequence would begin with door closed .The one who tries to open the door without the circuit key along would bang until the key is used to stop the alarm .Before entering the house the house owner caqn turn-off the door defender circuit so that the alarm not ring at all.