Axis Engineering Automation Pvt Ltd Chennai : Mechanical Design Engineer

[STSRekha]

Axis Engineering Automation Pvt Ltd Chennai : Mechanical Design Engineer

Company Name : Axis engineering Automation
Company Location : Karambakkam, porur, Chennai, Tamil Nadu, Chennai
Designation (of vacancy) : Mechanical Design Engineer
Company E-mail ID : axisdesign@sify.com
Company Website : axisengineering.webs.com

Job Description, Candidate Profile, Company Profile, Company Address :
Experience : 0 to 10years Exp
Location :chennai, Singapore and Malaysia
Compensation : Nil
Education : Diploma, BE and B.Tech (Mechanical Engineering)
Industry Type : Tooling design and Industrial Automation
Role :
Having experience in Plastic injection mold design, Die cast mold design, Press tools design and Jig&fixture design experience
GD&T Knowledge's
SPM Machine design experience
Industrial Automation design Knowledge
Functional Area : Designing and Manufacturing
Posted Date : 08, August,2011

Contact Details for Job

Company Name : Axis engineering automation
Website :axisengineering.webs.com
Contact Person :AJAYKRISHNAA
Email Address :axisdesign@sify.com
Address :
KARAMBAKKAM, Porur, chennai

General Instructions :
1) This is a job in Axis Engineering Automation Pvt Ltd at Chennai for the post of Mechanical Design Engineer.
2) For more details refer to the company website.
3) You can send resume / CV to the company's email address.
4) Source of the information is the company website / internet on the date of publishing.

[ekbotemelvin]

CURRICULUM VITAE
Melvin B Ekbote
E-mail : ekbotemelvin AT yahoo.com

OBJECTIVE :
- A Challenging position with ample opportunity for advancement and growth in the field of mechanical engineering and Design.
- Ambitious & self motivated with a strong desire & determination to achieve both personal & professional goals by implementing a proactive & professional approach.

Strengths :
- Creative thinking, Quick learning.
- Confident optimistic, Ready to take challenges.

Experience Summary :
BEFORE ENGINEERING :
- 0.5 Year of working experience as a Tool and Die Maker at INDOTECH TOOLINGS Pvt Ltd, Bangalore.
- 1 Year of working experience as Trainee Engineer at PRAGATI ENGINEERING COMPANY, HUBLI.

AFTER ENGINEERING :
- 1.3 Years of working experience as a Design Engineer at BTM Forgings Pvt Ltd TARIHAL HUBLI an ISO : 9001-2008 Certified Company.
- 3 months of work exp at Infotech Enterprises Pvt Ltd Bangalore as Design Engineer from April 2011(CONTRACT).

Expertise :
- Modeling, Drafting, Detailing using software’s AutoCAD 2007 and Catia-V5. Assemblies of parts with Bill of material. Basic Knowledge of Wireframe Surface Design, DMU Kinematics.
- Geometrical Dimensioning and Tolerance (ASME Y14.5M-1994).
- MastercamV9 : Knowledge of 2D and 3D Computer Aided Manufacturing, and Programming.
- Good knowledge of manufacturing processes related to Machine tool components, Forgings, Valves, Press Tools and Molds.
- Basic knowledge of Enovia VPM, PDM and PLM.

Academic Details :
Qualification : Bachelor of Mechanical Engineering.
Institution : SDM CET Dharwad.
Board : Visvesvaraya Technological University.
Year of Passing : July2009
Qualification : Tool and Die making.
College : Nettur Technical Training Foundation Dharwad.
Board : AICTE Bangalore.
Year of Passing : Feb 2003.

Computer knowledge :
- Windows 98/XP, MS-Word, MS Excel & MS Power point.

Software Credentials :
- AutoCAD 2007- Drafting & Detailing of Drawings.
- Pro-E (Wf 2) & UG-NX5 - Part Design, Drafting & Assembly Design.
- Catia-V5 - 3D parametric modeling, Drafting, Basics of Generative Shape Design, Wire frame Surface Design and Assembly Design, Drafting & Detailing of Drawings.
- Enovia VPM : Product Data Management & Product Lifecycle Management

WORK EXPERIENCE :
Organization : INFOTECH ENTERPRISES Pvt Ltd, Bangalore.
Designation : DESIGN ENGINEER.
Duration : April 2011 to June 2011
Job Profile :
- Developing V4 to V5 migration and Detailing for the Locomotive components, Using Catia V5, Catia V4, ENOVIA VPM and PDM.
- Creation of 3d models for downstream applications and of production drawings from the model in a standardized form using CATIA V5.
- Solid Modeling, Surface Modeling, detailing and assembly using CATIA-V5 R19. Providing design support to product designer in design projects for locomotive parts and accessories.
- Design documentation of part drawings assembly drawings, bill of material and part list creation using CATIA V5.
- 3D Model check using Q-checker - Drawing Quality Check - Manufacturing Feasibility study - GD & T knowledge.
- Product Data Management and Product Lifecycle Management using Enovia VPM.

Organization : BTM Forgings Pvt Ltd TARIHAL HUBLI an ISO: 9001-2008 Certified company.
Designation : Design Engineer.
Duration : JAN 2010 to March 2011
Job Profile :
- Job involves conceptual design & development of the Dies for Valves, Machine tool components, Pipe Fittings; involved Modeling, Drafting and Detailing of Parts using software’s Catia-V5, and AutoCAD.
- Modeling, Drafting and Detailing of parts using & AutoCAD Parameter changes and updating the Design changes with complete Bill of Materials to show the location and orientation of various parts mounted on the assemblies.
- Creation of Pattern, Production Drawing and Ensuring the Drawings prepared as per standard procedures. Geometrical Dimensioning and Tolerance application to meet the design intent.
- Incorporating the Engineering Changes 2D to 3D modeling & Drawing according to the Customer specific needs with complete Bill of Materials & regular interacting with Customer.
- Communicating designs and ideas to team.
- Computer Aided Manufacturing and Programming using MastercamV9

Organization : PRAGATI ENGINEERING COMPANY, HUBLI.
Designation : Trainee Engineer.
Duration : JULY 2006- JUNE 2007
Job Profile:
- Job involves Testing & manufacturing process related to Induction motors & valves.
- Coordinating with the quality issues, handling customer & client issues and cost considerations.
- Modeling, Drafting and Detailing of parts using CATIAV5 & AutoCAD Parameter changes and Updating the Design changes with complete Bill of Materials to show the location and orientation of various parts mounted on the assemblies.
- Creation of Pattern, Production Drawing and Ensuring the Drawings prepared as per standard procedures.
- Regular interaction with Client, Suppliers and Tool Room, Production & Quality Engineers.
- Designing Charts/Flow Charts for schematic representation of job flow and quality control.

Organization : INDOTECH TOOLINGS Pvt Ltd, Bangalore.
Designation : Tool and Die maker.
Duration : Sep 2002- Feb2003
Job Profile:
- Manufacturing and maintenance of jigs & fixtures, press tools, dies and try out of dies.
- Rectification, reworking and modification of jigs & fixtures, punch, dies and tool subparts.
- Work with Tool Room Engineers, design Engineers and Quality Engineers to ensure manufacturing, assembly & cost considerations.
- Regular interaction with Client, Suppliers and Tool Room, Production & Quality Engineers.
- In charge of Molding shop, Product Assembly line and in house Quality checking.

[Guest]

RESUME
P.M.Mohamed Thariq
Email id : mohamedthariq20 AT gmail.com

Objective :
To be associated with a progressive organization which can provide me with a dynamic work sphere to extract my inherent skills as a Professional, use and develop my aptitude to further the organization’s objectives and also attain my career targets in the progress.

Educational Qualification :
Sl No Course Name of the Institution / University Year of Passing % of Marks :
1 BE (Mechanical) National Engineering College, Kovilpatti. (Anna University of Technology, Tirunelveli.) 2011 75.24%
2 H.S.C Hidhayathul Islam Hr. Sec School , Kadayanallur, Tirunelveli District. 2007 88.33%
3 S.S.L.C Darussalam Hr.Sec.School, kadayanallur, Tirunelveli District. 2005 83%

Field of interest :
- Manufacturing Technology

Software skills :
- CATIA V5R11
- Autocad
- Solid works

Project work :
- Design and fabrication of two stage cylindrical gear box.
- Sensitization studies on Friction Stir Welded AISI 304 Austenitic Stainless Steel joints.

Training undergone :
- Industrial visit to Integrated Coach Factory, Chennai.
- Industrial visit to Deccan Pumps, Coimbatore.

Membership and Responsibilities :
- Serving as the Leader for my project team
- Active member in ISTE
- Active member in Junior Jaycee Wing.
- Active member in Mechanical Engineering Association.

Extra curricular activities :
- Junior Grade in English type writing
- Participated workshop on Recent Advances in Friction Stir Welding’10

Personal skills :
Good communication and written skills, willingness to learn new concepts, hard working, easily adaptable to various situation and being adjustable to every peoples, tackling and solving problems in effective manner.

[Guest]

MALAY MOHAN SHARMA
malaysharma56 AT gmail.com

Career Objectives :
To work for an organization which provides the platform to showcase and enhance my technical and professional skills.

Educational qualifications :
Education Course Univ./BoardI School/College Year of Passing Aggregate Marks :
B.TECH Mechanical Engineering COMERCE SLIET, longowal Sangrur, PUNJAB 2010 58%
DIPLOMA Industrial production Engineering SLIET, longowal Sangrur, PUNJAB 2007 66%
CERTIFICATE Air-conditioning and Refrigeration SLIET, longowal Sangrur, PUNJAB 2005 71%
HSC(12th) CBSE D.V.Boys School,Chittaranjan 2002 43%
SSC(10th) CBSE D.V.Boys School,Chittaranjan 2000 50%

Soft Skills :
- Good communication and intellectual skill with good command over English and Hindi.
- Good communication and intellectual skill with good command over Bengali and Punjabi (only speaking).
- Hard worker with flexible approach.
- Capable of handling complex situations with calm.
- Can work in teams and independently with same ease.
- Participated in various elocution, extempore and debate competitions at school and college level.

Technical skills :
- Computer languages : C
- Operating systems : Windows 98, 2000, Xp,
- MS Word, MS PowerPoint, MS Access.
- CATIA…..

Academic Projects :
1. Title : HARDNESS TEST (GRADUATE LEVEL)
- Technologies used : Chemical used: Silicon Carbide, Aluminum Oxide, Carbon. Foundry Technology, Heat Treatment Processes, Hardness Testing Processes.
- This project was developed keeping in mind today’s needs of competition and evaluation of hardness of tool, and there lie. Through this we can come to know about material property and tool life. The determine hardness we had done hardness test and finally we came to know that how hardness vary with adding different chemical composition.
- Responsibilities : To know about tool life.
- Team size : 2
- Duration : 6 months.

2. Title : Air Conditioning System (DIPLOMA LEVEL)
- Technologies used : Air Conditioning Tech. Brazing And Soldering tech., Heat transfer,
- Responsibilities : designing the system.
- Team Size : 4
- Duration : 6 months.

Summer training :
NAME OF ORGANISATION FROM----TO PERIOD :
- MARUTI,BERKELEY, MOHALI----20/09/10 – 20/10/10 (Trainee)
- B.G.S -AUTOMOBILE, MOHALI----10/06/10 – 10/09/10 (Trainee)
- A.T.I- KOLKATA --- 08 /06/09 – 19/06/09 (Heat treatment and Material testing)
- C.T.T.C-BHUBANESHWER----01/07/08 – 31/07/08 (Conventional machining, CNC machining/ CATIA)
- H.A.L-KORAPUT ---- 05/06/08 – 04/07/08 (Project study of Gear manufacturing, single crystal blade casting)
- S.A.I.L-IISCO, STEEL PLANT --- 01/06/06 – 14/08/06 (Study of Coke Oven, Blast Furness, Production Process)
- ANJANEY. FERRO ALLOYS- L.T.D ---- 16/11/04 –15/01/05 (Study of Production Processes, Study of Cooling plant)
- HINDUSTAN CABELS -L.T.D ---- 15/03/04 – 27/05/04 (Study of production processes)

Achievements :
- Volunteered annual functions in college.
- Participated in ROBO BEAM held at Thapar University, Patiala
- Participated in Quiz contest held by Thapar University, Patiala
- Participated in Techfest 2006 (Modal exhibition) in S.L.I.E.T, University.

[Guest]

M.Kumar
Email :amma.kum AT gmail.com

Career Objective :
Quest to work in a professional and competent atmosphere involving my enthusiasm aided with my efforts contributing to the growth of the organization and to strive, achieve excellence in the area of work undertaken with honesty, commitment and dedication.

Academic profile :
Bachelor of Technology with 73%
Jawarharlal Nehru Technological University(JNTU),Anantapur. Andhrapradesh, India. June 2008-April2012
Under Graduation ( M.P.C) with 94% Sai jyothi jr. collage,puttur,chittoor (dist). June 2006-June 2008
S.S.C with 87% Jnana jyothi vidyamandhir,puttur,chittoor(dist). June 2006.

Technical Skills :
1) Mechanical Skills : AutoCAD,PRO-E .
2) Operating Systems : Windows XP, Windows Vista.
3) Programming Language : C, Basics of C++,java.
4) Package : MS- Office.

Activities :
- Participated in National Level Paper Presentation AT NBKR Engineering College, Nellore,Andhra Pradesh.
- Participated in National Level Technical Symposium AT BSIT Engineering College, RangaReddy(dist), Hyderabad
- Participated in National Level Technical Symposium AT MVJ College of Engineering And Technology,white field, Bangalore.
- Participated National Level Technical Symposium AT savitha university,Chennai.
- Participated National Level Technical Symposium AT Sri Raghu Institute of Engineering & Technology,vizag.

Strengths :
- Self Confidence.
- Hard Working.
- Capable of Adapting myself to different environment.

[mahekaan]

CURRICULAM VITAE
Mahendra K. Chotaliya
Email : mahekaan AT gmail.com
mahe_kaan AT yahoo.co.in

Experience Profile :-
- Hi-Point Services(I) Pvt. Ltd., Mumbai.
As a Service Engineer ( March 2011 – Till Date )
Nature of Duties :-
- Logic Design, Interfacing of the F & G System with PLC, DCS at Customers end.
- Project Execution at offshore location for British Gas Panna Platform.
- Co-ordination with clients, consultants, Inspection Authority of the Project on the Ongoing Projects.
- Leading project execution & maintenance of safety instrumentation for HPCL, Reliance, GCPTCL, British Gas.
- Hands on experience on Fire & Gas Detectors & Controllers manufactured by Detronics, Honeywell Analytics, UK Dragger, Crowcon.
- Co-ordination of Annual Maintenance Contract for F&G Systems with British Gas, Reliance Industries Jamnagar & Dahej, HPCL Mumbai, Essar Jamnagar, GCPTCL Dahej, BORL MP.
- Prabhat Automation, Mumbai.
As a Project Engineer ( July 2010 – March 2011)
Nature of Duties :-
- Installation, configuration, commissioning & erectioning of PLC based systems, Communication Systems.
- Installation, configuration of SCADA & Protocol converters.
- Preparation of I/O List.
- Preparation of Cable Schedule, Hook up diagrams.
- Preparation of Wiring Diagrams with AUTOCAD Software.
- Terminal box checking and fault detecting in Panel side and also in Junction Box side.
- PLC Program implementation & modification, Program Down loading, Uploading, hard ware & Software configuration, HMI implementation & modification.
- Modifications for interlocks and safety, field instruments & control valve calibration & maintenance.
- Preparation of control logic & logic for safety interlock.
- Provide training related to different systems to customers.

- WEI-PACK Engineering Pvt. Ltd., Mumbai.
As a Project Engineer ( Nov 2009 – June 2010 )
Nature of Duties :-
- Installation, Commissioning & testing of bag filling systems.
- Installation, testing & calibration of Instruments like Loadcell, Pressure Switch and Sensors etc. on site.
- Execution of control valve installation, control panel installation, switch rack installation, instrument mounting, air tubing, conduit and cable tray construction, marshalling cable wiring, JB wiring.
- Calibration of Sensors, Control Valves & ON/OFF Valves, Pressure Switches.
- Terminal box checking and fault detecting in Panel side and also in Junction Box side.
- PLC Program implementation & modification, Program Down loading, Uploading, hard ware & Software configuration, HMI implementation & modification.
- Modifications for interlocks and safety, field instruments & control valve calibration & maintenance.
- I/O List Preparation.
- Instruments cable, Power cable tray routing plan.
- Interconnection diagram between system & control panel.
- Cable specification & cable schedule, material procurement.
- Preparation of control logic & logic for safety interlock.
Work Profile :-
- Automation of whole system using Unitronics PLC 570.(advanced version with color display & touch screen) so programming of the same.
- Installation & calibration of ‘4 Load cell’ assembly used for weighing purpose.
- Installation and calibration of air regulator (FRL) & pressure switch to control the flow of pneumatic supply.
- Installation of sensors (Proximity type) which is used as for interlocking purpose.
- Installation of 12”, 3 & 2 position butterfly valve and its commissioning.
- Installation of Bagging System (Weighing Automation) – to fill the bag with the known weight (set point) along with vibro system to provide vibration.
- Panel designing (Control panel, Power Panel, Pneumatic Panel).
- Pneumatic tubing & Electrical wiring of whole system.

- Gandhi Entrance & Automation Pvt. Ltd., Mumbai.
As a Service Engineer ( July 2005 – May 2006 )
Nature of Duties :-
- Handling all AMC’s of Automatic doors, Rapid doors, Overhead doors & barriers.
- Installation, maintenance & servicing of all types of automatic doors & barriers.
- BPL Telecom Pvt. Ltd., Mumbai. (Inplant Training)
As a Technical Support Engineer (Dec 2004 – May 2005)
Nature of Duties :-
- Handling Technical Enquiries related to telephone in all over Mumbai.
- Servicing & troubleshooting of all types of telephone.
- Keep all records of customer complaints.

- Artech Instruments & Controls Pvt. Ltd., Mumbai. (Inplant Training)
As a Technical support Engineer (June 2003 – Nov 2003)
Nature of Duties :-
- Handling Technical Enquiries related to Temperature Controllers, Temperature Indicators.
- Assembling, Testing & Calibration of Instruments like temperature controllers, indicators, relay circuit board, display circuit board.

Programming Language :-
- FUNCTION BLOCK Programming.
- LADDER Programming.

Knowledge of PLCs :-
Hands on experience on all the type of PLCs which are listed below.
- PLC with touchpanel HMI :- Vision 280, Vision 290, Vision 530(Unitronics).
- PLC with graphic HMI :- Vision 120, Vision 130, Vision 230(Unitronics).
- PLC with text HMI :- Jazz, M90/M91(Unitronics).
- I/O Modules related to PLCs.
- PICO PLC(Allen Bradly).
- Micrologix 1000,1200,1500(Allen Bradly).
- AC-31, (50 & 90 Series PLC), AC-500 (ABB).
- ProcVu SCADA Software(GT Lab).
- Communication Modules(ADAM & MOXA).
- HMI :- PRIZM 140, 285(RENU).
- Protocol Converters.

Education :-
- Bachelor Of Engineering in Instrumentation. (2006 – 2009) Parshvanath College of Engineering, Thane.
Percentage Of Marks :- 71.79%(3rd Rank in B.E.)
- Diploma In Digital Electronics. (2001 – 2005) Shree Bhagubhai Mafatlal Polytechnic, Vileparle.
Percentage Of Marks :- 74.08%
- S.S.C. (2001) Sardar Vallabhbhai Patel Vividlakshi Vidyalaya, Kandivali.
Percentage Of Marks :- 76.93%

Projects :-
- Final Year Degree Project :-
“Object Tracking System”, It is basically a system which is used to track the object into the particular range.

- Final Year Diploma Project :-
“Distance Sensing Robot”, It is micro-controller based system is developed for measurement & sensing distance with help of transreceiver system.

Certification Details :-
- Proficiency Certification holder in Industrial Automation, Certified by Institute for Design of Electrical Measuring Instruments (IDEMI), Sion.

Offshare Training Details :-
- Elementary First Aid.
- Fire Prevention & Fire Fighting.
- Personal Survival Techniques.
- Helicopter Underwater Escape Techniques.

Note :- List of Completed Projects are as Follows.
Completed Projects:-
- Hi-Point Services (I) Private Limited, Mumbai.
As a Service Engineer ( March 2011 – Till Date)
Client:- BRITISH GAS PANNA PLATFORM( OFFSHORE).
- Project Documentation, Installation & Commissioning of Gas Detection System.
Client:- RELIANCE INDUSTRIES LTD.(DAHEJ)
- Installation & Commissioning of Gas Detection System.
- Prabhat Automation, Mumbai.
As a Project Engineer ( July 2010 – March 2011)
End User:- BPCL-KRL, Kochi. (January 2011)
Client:- EMERSON PROCESS MANAGEMENT.
- Development, Testing & commissioning of Stack Analyzer Shelter Logic using Allen Bradley PLC .
End User:- IOCL(ABB-PLL), Barauni, Patna. (December 2010)
Client:- ABB LTD.
- Gas Monitoring System
End User:- ROSA POWER PROJECT , Shahjahanpur, U.P.(November 2010 )
Client:- EMERSON PROCESS MANAGEMENT.
- Data Acquisition System
End User:- IOCL(Linde),Barauni, Patna.(September 2010 to October 2010)
Client:- ABB LTD.
- Gas Monitoring System
End User:- IOCL, Baroda.(August 2010)
Client:- Emerson Process Management.
- Gas Monitoring System
End User:- HPGCL(Reliance Infrastructure Ltd) , Hisar, Haryana.(July 2010)
Client:- Emerson Process Management.
- Data Acquisition System(2 Nos.)

- WEI-PACK Engineering Pvt. Ltd., Mumbai.
As a Project Engineer ( Feb 2010 – June 2010)
Completed Projects:-
SARBI LUBRICANTS.(May 2010 – June 2010)
- Automatic Drum Filling System(2 Nos.)
Intermediate Chemical Company.(March 2010 – May 2010)
- Jumbo Bag Filling System( 1000 Kg )
- Small Bag Filling System( 25 Kg )

[Unregistered]

RESUME
R.TAMIL SELVAN
e-mail : rts88jan AT gmail.com

CARRIER OBJECTIVE :
To work in a professional organization in a challenging environment.
I can use my talents, knowledge and potentials to the maximum extent.

ACADEMIC PROFILE :
B.E AERONAUTICAL JAYA Engineering College (Chennai) Anna University (2011) 71%
DIPLOMA IN AUTO MOBILE ENGINEERING RAJAGOPAL Polytechnic College , (Gudiyatham) DOTE (2008) 82.62%
X Government Higher secondary school State Board (2003) 68.8%

SOFTWARE SKILL :
M.S OFFICE
AUTO CAD
PRO-E

KNLOWAGED AREA :
Knowledge in 2D Drafting, 3D Modeling.
Strong ability to create/read/interpret engineering drawing.
Knowledge of 3D Model in Pro-E.
Knowledge about Projection & Different Views.
Knowledge in GD & T [Geometric Dimensioning & Tolerance).
Knowledge in developing mechanical designs with the help of Pro-E.
Preparation of master list of drawings and Master drawing File.
Drawing study and preparation of bill of materials.
Making of Profile Templates for child part.
Designing, Developing & Detailing for JIGS & FIXTURE using pro-e Software.

ABOUT ENGINEERING PROJECT :
In the new system, ground-based intelligent software agents communicate with their on-board counterparts to continuously collect flight data and monitor the passenger cabin and cockpit by using satellite communication technology.
Our project will detect the unsafe condition and provide early warning to the pilot.

PERSONAL INFORMATION :
Name : R .Tamil selvan
Father’s Name : T.Rajendiran
Date of Birth : 01.07.1988
Marital Status : Single
Sex : Male
Language known : Tamil & English

I hereby declare that, all the above information is true to best of my knowledge.

Yours truly
Date :
Place :Gudiyatham
(R.TAMIL SELVAN)

[Unregistered]

P.VIJAYAKUMAR
E : vijayakumar_85 AT in.com

EXECUTIVE PROFILE :
An accomplished Design / Production with continuous success in delivering and surpassing corporate objectives and targets. With over five years of Design /production / manufacturing experience in the field of special purpose machines, supplemented with good hands on engineering. Successfully has led multifunctional teams in many special initiatives, Quality and Consumer safety programs, Safety and Environment programs. A good team player, with a skill in motivating large workforces has maintained good employee relationships.

ACADEMIA :
** DME (Diploma in Mechanical Engineering), 2004 - 2007, 61.2% from Srinivasa Polytechnic College.
** SSLC - 50.4% from Little Flower Higher Secondary School, Kumbakonam.

POST QUALIFICATION EXPERIENCE :
Duration : May’07 - Till date
Future Automation Technologies Pvt Ltd, Chennai
Latest Designation : Project Engineer. (Design / Production)

Company Profile :
** AUTOMATED WELDING SPM (Special Purpose Machine) & Welding Equipments Manufacturing & supplying for Automobile industries, heavy engineering industries, pump industries, scaffolding industries.
** System Integrator of WELDING ROBOTS, ROBOT FIXERS, AND NEW PRODUCT DEVELOAPMENTS for various clients.

Key Result Areas :
** Responsible for Design to Dispatch of products.
** Conceptualize, sketch and prepare drawings as per client’s requirement.
** Production & Supervision of schematic, detail and working drawings.
** Co-ordination with subcontractors, vendors and clients.
** QA/QC of finished modules .
** Pre-commissioning and installation and commissioning of machines.
** Taking charge of various improvement projects.
** Up gradation of skill and Knowledge of subordinate through training Program.

IN FIELD KNOWLEDGE :
Designing & Drafting, Special Purpose Machine (Fabrication, Service and Maintenance).

PRODUCTS HANDLED :
Automated Welding Special Purpose Machine’s (TIG, MIG, PTA, SAW, PTW, SPMs, Robot Fixers, Welding Positioners, Conventional Rotators (Tank Turning Rolls), column & boom, Plasma Cutting Machine, H & Plus Beam Welders, H & Plus Beam Chain Rotators.

HANDLED SOME PROJECTS in FUTURE AUTOMATION TECHNOLOGIES(P)LTD.
Client : Hi Estem Pressing (P) Ltd, Chennai.
FANUC 120ic ARC MATE WELDING ROBOT Welding Fixers using HI PURSHER TANK welding system.

Client : Butway India Ltd, Chennai.
FANUC M900i ARC & SPOT WELDING ROBOT using TAG & MULTI STRICH welding system.

Client : HM Auto Industries. Irungattukottai.
Automated MIG welding spm .

Client :. Lone Star Industries, Chennai
Automated TIG with Cold wire feeder welding Column & Boom .

Client :. Arudra Engineers Pvt Ltd
Automated Double Torch MIG welding spm.

Client :. IGP Engineers Pvt Ltd
Automated Circular Job Plasma Transfer arc welding Spm .

Client :. Greaves Cotton Limited, Gummidipoondi
Automated Concrete Mixer shell , Internal & External Linear welding spm.

Client :. Marica Engineering Pvt Ltd, Chennai.
Automated Disk to Bush MIG welding spm.

Client : Avasarala Technologies Ltd.Bangalore.
Automated breasce welding spm with Column & Boom.

Client : Oswal industries Ltd. Ahmedabad.
Automated PTA & SAW WELDING spm ,Column & Boom & Turn Table & Head and Tail Stock.

Client : Godrej & Boyce Mfg.co.ltd , Mumbai.
Automated Circular Job welding spm with Head and Tail stock.

Client : GR Industraies, Coimbatore.
Automated Circular Job Plasma Transfer arc welding Spm with 500 kg Positioner.

Client : Precision Equipments (Chennai) pvt ltd. chennai.
Automated linear & Circular Job SAW welding Spm , 1 Ton Positioner, 40 Ton capacity Conventional Rotators,

Client : BGR Energy System Limited,Chennai.
Automated conventional Rotators 80Ton capacity .

MACHINE KNOWLEDGE :
Turning Center, Milling, Plano miller, Shaping machine, Slotting machine, Sharing& Folding machine, Plasma cutting machine, MIG ,TIG ,ARC Welding Power Sources.

SOFTWARE SKILLS :
Auto CAD (2D and 3D) , MS Office.

INDUSTRIAL VISITS :
Southern Railway, Trichy.
Tamilnadu State Transport Corporation, Trichy.

PERSONAL PROFILE :
Father’s name : Mr. S. Padmanabhan
Date of Birth : 05-05-1985
Languages Known : Tamil, English, Telugu.
Marital Status : Single.

I hereby declare that all the information furnished above is true to the best of my knowledge.
(P.VIJAYA KUMAR)

[Prasadnandhu]

D.PRASAD
Email Id : duraiprasad25 AT gmail.com

OBJECTIVE :
Seeking a challenging position to utilize my skills and abilities in the industry that offers professional growth while being resourceful, innovative and flexible.

EDUCATIONAL PROFILE :
Course Institution Name Board Year of Completion Percentage
Diploma in Mechanical Engineering Murugappa Polytechnic College Autonomous 2011 76%
S.S.L.C P.J. Gupta High School Tamilnadu State Board 2008 88%

PROFESSIONAL EXPERIENCE :
Company : TMTE METAL TECH Private Ltd, Chennai.
Designation : AUTOCAD DESIGNER
Duration : July 2012 – Till Now
Jobs performed : Working as a Autocad Designer
Layout Preparing
Product designing
Cost Estimation
ERP

Company : Brakes India Ltd Chennai.
Designation : Technician Apprentice
Duration : Dec 2011 – June 2012
Jobs performed : QUALITY inspection

SOFTWARE SKILLS :
AutoCAD(Working experience)
Pro/E Wildfire (Certificated course)
Knowledge In SolidWorks

PERSONAL STRENGTH :
Adaptable to the environment.
Ability to finish work on schedule.
Aspiration to learn more.
Implementing New things

PERSONAL PROFILE :
Name : D.Prasad
Date of Birth : 23-10-1992
Sex : Male
Father’s name : G.Duraikannu
Languages Known : English and Tamil
Nationality : Indian
Hobbies : Listening music & playing cricket

DECLARATION :
I do hereby declare that the above mentioned information is true to the best of my knowledge.

Date :
Place :
D. PRASAD

[Unregistered]

NAME : ARUNKUMAR D
REG NO : 201110011 SEMESTER : VI
PERCENTAGE : 79.38% BRANCH : MECHANICAL ENGG
E-MAIL : Arunkumar466399 AT gmail.com

AGE : 18 DATE OF BIRTH: 17.05.1995
SEX : MALE HEIGHT: 170 cm
WEIGHT : 50 kg
SOCIAL STATUS (OC/BC/MBC/SC/ST) :BC NATIONALITY : INDIAN MOTHER
TONGUE : TAMIL

LANGUAGES KNOWN :
TO SPEAK : TAMIL AND ENGLISH
TO READ : TAMIL AND ENGLISH
TO WRITE : TAMIL AND ENGLISH

PERSONAL PROFILE :
FATHER’S / GUARDIAN’S NAME : DURASAMY G
OCCUPATION : FARMER

ACADEMIC DETAILS :
COURSE INSTITUTION EXAMINATION AUTHORITY MONTH & YEAR OF PASSING % OF MARKS
DME CENTRAL POLYTECHNIC COLLEGE DOTE APRIL 2013 79.38%
S.S.L.C GOVT. HR. SEC. SCHOOL,
ARASAMPATTU STATE BOARD APRIL 2010 93.2%

ELECTIVES :
1.REFERIGERATION AND AIRCONTIONING
2.AUTOMOBILE TECHNOLOGY

SOFTWARE SKILLS :
AUTOCAD,CATIA,CNC AND PRO-E

AREAS OF INTEREST :
DESIGN ENGINEERING,
THERMAL ENGINEERING & AUTOMOBILE ENGINEERING

HOBBIES :
PLAYING CRICKET
READING NEWS PAPER & BOOKS.
LISTENING MUSIC

DECLARATION :
I do hereby declare that the particulars of information and facts stated herein above are true, correct and complete to the best of my knowledge and belief.

Place :
Date :
Name : ARUNKUMAR D

[Unregistered]

PRABHAKARAN.K
kprabhakaran43 AT gmail.com

Career objective :
To pursue a highly challenging career, where I can apply my knowledge, learn the Latest technology, and work for the development of the company.

Educational Qualification :
B.E in Mechanical Engineering ( 2007 – 2011 ) from Thiagarajar College of Engineering, Madurai with 75.6% ( FIRST CLASS )

Technical Competencies :
Modeling Package : Auto cad, Pro Engineer wildfire 4.0, CATIA V5.
Analysis Package : ANSYS.
Management Package : Primavera.

Professional experience :
Company Name : Sekkei Solutions Co Ltd
Designation : Design Engineer
Period : 15/08/12 to till date
Software worked on : Auto cad, CATIA V5
About Sekkei Solutions
Sekkei Solutions Co. Ltd. Japan, founded in year 2006, provide highly skilled engineering talents to the mechanical engineering and software industry in Japan. Sekkei Solutions head office is based in Kanagawa prefecture, Japan. Sekkei solutions designing automotive jigs and fixtures of car panel for Nissan Motor Co Ltd
Responsibilities :
** Study the input for project, Understanding the requirements of customer, concept building & Estimating the job.
** Provided effective design, assembly, for different projects using CATIA and associated applications.
** Worked for different projects, with different capacities in close association with designing and engineering team.
** Design and drafting of automotive jigs & Fixtures in CATIA V5 as per Nissan Standard.

Projects :
1. P32S
Drafting of JIG POST for Body Side Outer.
Client : Nissan Motor Co Ltd JAPAN.
Role : Design Engineer
Tool used : CATIA V5 & Auto CAD.
** Design of Jig set for the Body Side Outer.
** Detailing of Jig post & its part as per NISSAN Standard.

Other projects :
** #10_H60A
** B12L
** P53B_LWB

Professional Experience :
Company Name : Steel Strips Wheels Limited
Designation : Graduate Engineer Trainee
Period : 01/08/2011 to 08/08/2012
Software worked on : Auto cad, Pro-E.

About Steel Strips Wheels :
A Steel Strips Group Company, the largest manufacturer of Automobile wheels with a turnover of about 4 Corers per month, having its Parent plant in Chandigarh. it started a new plant near Sriperumbudhur for 200 crore Project, mainly focusing on exports.

Responsibilities :
** To Model the strip layout for given component and send to customer approval
** To Modeling the tool by customer standards
** To Model the tool directly in 3d model & prepare detailed drawings
** To apply GD&T for parts wherever required
** Redesigned our tooling, checked and corrected for new design.
** Responsible for completion of tooling design in schedule time

Area of interest : Tool design

Personal profile :
Father’s name : P.Kandasamy
D.O.B : 04-05-1990
Marital status : Single.
Nationality : Indian.
Languages known : Tamil and English.

I hereby declare that the particulars endowed above are true to the best of my knowledge and belief.
Place :
Date : (K.PRABHAKARAN)