NMDC Limited Recruitment 2011 www.nmdc.co.in : Assistant Trainee

[muthukalee]

N.M.D.C. LIMITED
(A Govt. of India Enterprise)
BAILADILA IRON ORE MINE, KIRANDUL COMPLEX
Post : Kirandul, Dist : South Bastar Dantewada (C.G.) INDIA – 494 556

SPECIAL RECRUITMENT DRIVE FOR PERSONS WITH DISABILITY (PWD)

NMDC a Navaratna Public Sector Enterprise is a Premier Mining Organization and consistently profit making organization with a large turn over. Applications are invited from interested PWD candidates for the following post in Bailadila Iron Ore Mine, Kirandul Complex, Kirandul, South Bastar Dantewada Dist., Chhattisgarh State :

Name of the Post : Junior Assistant Gr.III (Trainee)
No. of Vacancies : 2

Qualification & Experience :
Essential
Graduate in Arts/Commerce/Science and minimum typing speed of 30 words per minute in English and/or Hindi Type writing with 01 year experience in typing and clerical.
Experience and Typing speed can be relaxed in exceptional cases.

Interested candidates may download the blank application form from NMDC website : www.nmdc.co.in or send their neatly typed applications on plain paper setting out
(1) Post applied for
(2) Applicant’s Name
(3) Father’s/Husband’s name
(4) Sex
(5) Date of birth & Age (in figures and words)
(6) Present Address
(7) Permanent Address
(8) Disability Type (VH/HH) (Attach Proof as per Govt. of India Guidelines)
(9) Caste (if SC/ST/OBC), attach certificate from Competent Authority)
(10) Qualifications (Academic & Technical) with year of passing, name of School/College/ University, division & percentage of marks obtained, etc.
(11) Experience
(12) State and district to which originally belong.
(13) Declaration
(14) Candidates Signature
(15) Other information etc., along with attested copies of all certificates and testimonials (In support of qualification, experience Caste etc.)
(16) Contact No. with email Id.

and recent passport size photograph so as to reach the
DY. MANAGER (PERSONNEL)R&P,
BAILADILA IRON ORE MINE, KIRANDUL COMPLEX, POST-KIRANDUL,
DIST.-SOUTH BASTAR DANTEWADA, (CHATTISGARH), PIN-494556,
latest by 31/08/2011. The post applied for should be clearly super scribed on the envelope.

More Details : http://www.nmdc.co.in/nmdccareers/

[Narayanpoonia]

NARAYAN RAM
E-mail Id : poonia.narayan AT gmail.com

CAREER OBJECTIVE :-
A career, that provides opportunities for personal and professional development as well as to contribute to the organizations effectiveness in order to take the company to the top position, where ever I work.

PROFESSIONAL QUALIFICATIONS :-
1. Completed B. Tech from Rajasthan technical university, Kota with Honours.
2. College : Marudhar Engg College. Bikaner ,Rajasthan.
SR.
NO. NAME OF
EXAMINATION BOARD/
UNIVERSITY YEAR OF PASSING AGGREGATE % OF
MARKS
1. B.TECH (ELECTRONICS & COMMUNICATION) R.T.U. ,
KOTA ,
RAJASTHAN 2010
74.64%
2. H.S.C. EXAM (12th STD.) RAJASTHAN BOARD 2006 73.85%
3. S.S.C. EXAM (10th STD.) RAJASTHAN BOARD 2004 68.83%
WORK EXPERIENCE :- One Year experience in Telecom as “RF ENGINEER”

COMPANY :AIM INDIA GROUP(10 MONTH FROM JULY 2010 TO APRIL 2011)
COMPANY :BTS PVT. LTD.(MAY 2011 TO present time)

Job Profile : MW LOS, RF Survey, EMF Survey, BTS Survey.

Job Details :

- LOS survey.
- Checking for obstacle details that may obstruct the transmission path of MW link as planned.
- Extraction of AMSL values from topo maps
- On field obstacle heights collection of transmission path of the MW link.
- Proposing the optimum height of antenna keeping in view the height of obstacles and clearance criteria.
- Generation and submission of LOS survey reports.
- RF Nominal site planning.
- RF Site Selection of about 250 Sites (Ultra & Metro).
- Design Antenna heights for RF Coverage and Orientation.
- Capacity & Coverage Sites.
- RF Candidate Site evolution (Search Ring).
Software / Tools Used :
- Map Info.
- Radio link tool.
- Global mapper.
- Ms-Office
- Altimeter.
- GPS (Garmin 72 &72H Channel), Compass etc.
TRAINING EXPERIENCE :-
- Have taken certified summer training as a trainer in “Idea Cellular PVT. LTD.” In “R.F. planning” From Jaipur (Rajasthan).
- Have a Industrial Visit in BSNL, Bikaner
PROJECTS UNDER TAKEN :-
DEGREE
(B.Tech E.C.) Minor “MULTIPURPOSE CIRCUIT”
Major “GSM BASED LIGHT CONTROL”
INTERESTED SUBJECTS :-
- COMMUNICATION ENGINEERING
- ELECTRONICS DEVICES & CIRCUIT
- DIGITAL ELECTRONICS
- VLSI
SEMINAR PRESENTED :-
7TH SEMESTER G.S.M.
8TH SEMESTER INDIAN LAUNCHING VEHICLE
TECHNICAL SKILLS :-C,C++

EXTRA CURRICULAR ACTIVITIES :-
- Participated in various events of the annual function.
- Actively participated in various inter and intra school educational events and excelled in many of them.
PERSONAL ATTRIBUTES :-
- Team building and Leadership skills – supporting team members to achieve personal and professional goals.
- Problem solving capability with positive attitude.
- Highly responsible and confident on work.

[Guest]

RESUME
NAME : Kiran Rao C
E-MAIL ADDRESS : kiranrao.rao7 AT gmail.com
EDUCATIONAL/PROFESSIONAL QUALIFICATION :
NO. INSTITUTE STUDIED EXAM YEAR CLASS OBTAINED %
PASSED
1. A.B.V.K SSLC FIRST CLASS 75.04
Mandya (2003)
2. P.E.S 2nd P.U.C FIRST CLASS 74.33
Mandya (2005)
3. P.E.S.C.E B.E FIRST CLASS 73
Mandya (2009)
SKILLS
- Fast and self directed learner and ability to adjust to the situation.
- Self confident, capable of decision
- Honesty, time conscious, sense of responsibility, hard worker and a good listener.
- Ability to deal with people friendly.
- Enthusiastic for team work and open to new and creative ideas.
Technical Skills :
Operating system : MS Windows XP, Windows 7
SOFTWARE KNOWN :

1. CATIA V5
2. SOLID WORKS
3. ANSYS
4. AUTOCAD
5. MICROSOFT OFFICE 2003, 2007
WORK EXPERIENCE :
Working for LUWA as a mechanical engineer , HVAC project handling.
Organization : Luwa India Pvt Ltd.
Duration : March 2010 to till date
Designation : Erection Engineer
Site Handled : Alok Industries Ltd., Silvassa, Diu & Daman.
Birla cotsyn (I) Ltd.,Malkapur, maharashtra
Pee Vee textiles(I) Ltd., Nagpur
LNJ Denim RSWM Ltd.,Rajasthan
Godfrey Phillips(I) Ltd.,Mumbai
Lokanayak narayan SSS,Shahada

1. Responsible for Erection & Servicing of Air Handling Units (AHU’s) or Humidification plant.
2. Responsible for Erection of AHU components such as Rotary Air Filters, Supply Air Fans, Return Air Fans, Dampers etc.,
3. Responsible for Erection of special mechanism of AHU’s such as Air Washer .
4. Served both in Textile and Non-Textile Industries.
5. Responsible for Commissioning of FD- Plant and H-Plant

[Guest]

RESUME
Ashok Kumar .Vadla
E-mail : vadlaashok06 AT gmail.com

CAREER OBJECTIVE
Quest to work in a professional atmosphere, hat enables me to cope, learn and to put in all my efforts as per the requirements of the Organization as its best, and to make myself as a means to achieve Organizational objectives as desired and become a prosperous asset to the Organization.
ACADEMIC PROFILE
- Secondary School in Sri Raghavendra Vidya Sadan, Kurnool, Scored 72.8%, March 2001.
- Intermediate in Sri Krishna Junior College, Kurnool Scored 68.9%, March 2003.
- Bachelor of Technology in Computer Science and Engineering, at St Johns College of Engineering and Technology, Kurnool, scored 61%.May 2007.
SOFTWARE SKILLS
Operating system : Windows 98, Windows XP.
Languages : C, JAVA, C++.
Web Technologies : HTML
Databases : Oracle, MySql.
EXTRA CURRICULAR ACTIVITIES
- Participant in cricket tournament at school section.
- Participant in district level quiz at school level section
- Participated in social welfare programs at school section.

PROJECT HANDLED :
Project Name : On-Line Error Handling
Environment : Dot Net.
Duration : 6 Months.
Team Size : 4 Members.
Contribution : Project Member.
Description : Online Error Handling is enterprise Intranet Application that automates and improves the procedures with in the organizations. The system will keep track the information about the each error and also keep track of the task assigned to each error. The main purpose is to give rights to the administrator to monitor all the activities or tasks assigned to each employee belong to the different departments assigned by the administrator and to get day to day status reports from the employees.
The ‘ONLINE
CURRENT EMPLOYEE

Designation : Programmer and Networking Admin.
Department : Information Systems.
Chemical Company : SRI RAYALASEEMA ALKALIES & ALLIED CHEMICALS Ltd..,
Kurnool. (ISO 9002, ISO 14001 &OHSAS 18001 Certified Company)
Joining date : 05.07.2007

Experience : 4 YEARS (From July 2007)
Role
- Maintenance of Managment Information System Application Developments.
- Maintaining of Software Installation Packages.
- Maintenance of Internet and Out Look Connectivity’s.
- Finding solutions for Net Working Problems and Requirements both in factory and corporate office.
- Role in discussion with executives on system software requirements and implementation interface with users on additions /modifications / requirements.
- Involved in Annual Maintenance Requirements for PC’s by coordinating with HCL Dealers, Hyderabad
- Working on Optical Fiber cabling through Radio Frequency for data transmission from Factory to Corporate Office

[Guest]

CURRICULUM VITAE
BHASKAR GHOSH
Email : bghosh_2009 AT rediffmail.com
CAREER OBJECTIVE :
To work in dynamic environment that provides me a wide spectrum of experience and exposure. To bring a dynamic and versatile portfolio of skills at work place and to serve the firm with positive attitude and efficiency.
PROFESSIONAL EXPERIENCE :
CHARTERED ACCOUNTANCY COURSE FROM ICAI
PE-I Cleared in Nov’2006
PCC Cleared in May’2011
EDUCATIONAL EXPERIENCE :
Secondary(ICSE) 1st Div,March’ 2000
Higher Secondary 2nd Div,March’2002
B.COM(N.B.U.) 2nd Div,March’2005


ARTICLESHIP EXPERIENCE :
Worked as an Articled Assistant in De Chakraborty & Sen, Chartered Accountants, Kolkata.
Worked as an Articled Assistant in D.K.D & Associates, Chartered Accountants, Kolkata.
Major Clients Handled :
- BHARAT SANCHAR NIGAM LTD.
- BHARAT EARTH MOVERS LTD.
- KALPENA INDUSTRIES LTD.
- KARNATAKA SOAPS AND DETERGENTS LTD.
- NATIONAL INSURANCE CO.
- ING VYASA BANK
- ORIENTAL GROUP OF COMPANIES
Responsibilities includes :
- Performing audit procedures in accordance with the Accounting and Auditing Standards.
- Analysis of draft financial statements including notes to accounts.
- Physical Stock take and valuation as on the year end in accordance with Accounting Standards issued by ICAI.
- Vouching and Verification of various books like Purchase book, Sales book, Cash book, Journal book.
- Scrutinisation of Ledger books.
KEY ASSIGNMENTS :
- Tax Audit of National Insurance Co., Regulated Market Committee, Oriental Group of Companies.
- Stock Audit of Adonis Laboratories, M/s Indian Herbs Research & Supply Co. Ltd., Radhika Exports Pvt. Ltd.
- Concurrent Audit of Syndicate Bank, IDBI Bank, Oriental Bank Of Commerce.
- ITC Social Audit (Patna, Bandel, Sambalpur).
EXTRA CURRICULUM :
Diploma Course in Export Import Management.
COMPUTER PROFICIENCY :
- Completed 100 hrs. of Computer Training under ICAI, ITT center Russell Street, Kolkata.
- Working Knowledge regarding Application Package MS Office, Tally, Internet.

[Guest]

CURRICULAM VITAE
RAHUL KUMAR SINGH
Email Id :- rahulkumarsingh77 AT gmail.com
CAREER OBJECTIVE
To utilize my skills in the growthn and success of organization.
EDUCATIONAL QUALIFICATION
- Currently passed Bachelor of Engineering in branch Mechanical Engineering from Bhabha Engineering Research Institute Bhopal (M.P) with a degree of 68.61%
I have passed my High School from Saraswati Higher Secondary School, Sobhapur Colony (Betul) from M.P. Board in year 2004 with 77.8%.
- I have passed my Higher Secondary from Saraswati
Higher Secondary School, Sobhapur Colony (Betul) from M.P Board in year 2006 with 66.8%.
PROJECT
- Minor Project on ‘ Optimum Design And Analysis Of Composite Drive Shaft of An Automobile’.
- Major Project on ‘ Performance of Two Stage Heat Pump with Vapour Injected Compressor’.
ACADEMIC TRAININGS
- Minor Training from ‘MPPGCL Sarni, Betul (M.P)’.
- Major Training from ‘BHEL BHOPAL’.
EXTRA SKILLS
12 month teaching experience in engineering college of subject engineering drawing and machine drawing
- Course in CAD from Skill Development Point Bhopal (M.P)
- Basic Computer Skill like M.S.Office.
TECHNICAL KNOWLEDGE
- Strength of Material
- Thermodynamics
Engineering drawing

[Guest]

CURRICULUM-VITAE
MAHESH KUAMR SAHU

Email : mksahu002 AT gmail.com
JOB OBJECTIVE :
Challenging and rewarding upper level position in growth – oriented organization, which offers diverse job responsibility. Seeking a position as Quality Analyst to utilize my skills and knowledge in a renowned organization.
ACADEMIC DETAILS :
BSc. Graduate With Chemistry in 2007.
Higher Secondary School Certificate Examination Chhattisgarh Board in 2004.
High School Certificate Examination MP Board in 2001.

OTHER QUALIFICATION :
MDCH
Master Diploma In Computer Hardware & Networking, From
CARRIER CARRIER COACHING INSTITUTE, Sec-10 BHILAI (C.G.)

79% (A) GRADE
Basic Knowledge of SAP.
Basic Knowledge of MS Office, MS World,& MS Excel Etc.

SKILL :
Good Communication between seniors & juniors.
Improve the quality of available material.
Positive Attitude & Hard Working.
Grasping Power.

COMPANY PROFILE :
SEML is one of the lowest cost producer of steel ( Sponge Iron, Billets, TMT
(bars)and one of the largest manufacturers and exports of ferro alloys in India.
SARDA ENEGY & MINERALS LIMITED is acquired Iron ore,
Coal and Manganese mines in India and is aggressively looking for mineral
resource across the Globe.
JOB EXPERIENCE :

AT SARDA ENERGY & MINERALS LIMITED (SEML) SILTARA, RAIPUR
From 04 June 2009 to 31 July 2010 in SID Division as a TECH. ASST. ( PROCESS ).
And as a CHEMIST in Iron Ore Screening plant / washing plant at Dhurwatola
(SEML) from 02 August 2009 to till the date.
JOB PROFILE :
CURRENT PROFILE : As a CHEMIST
Improve the material quality from lower to standard grade.
Increase the percentage of Fe(T) in availability of Iron ore mines
Reduced the percentage of the Silica (Si02) from Iron ore fines.
After washed reduced the percentage of Phosphorus (P), Alumina (Al203), &
LOI (Loss Of Ignition), and etc.
Preparation of Chemical Reagents.
Maintain the water density through water treatment work.
Performance of each method step including, collecting, sampling, filtration,
concentration purification, sample staining and Chemical
examination of the material.
PREVIOUS PROFILE : As a Tech. Asst.
Proper checking all the equipments, its working properly as a field Operator.
Handle the Accretion cutting work inside of the KILN at shutdown.
Maintain the QRT, NRT, & Thermocouple temperature.
Maintain the inlet and outlet slip seal temperature.

[Guest]

CURRICULUM VITAE
KAMLESHWAR PRASAD SAHU
Email : kprasad79 AT yahoo.co.in
Career Objective : A challenging and versatile Job in an organization where one could get the maximum exposure to on-the-job conditions and develop into a true professional and performance being judged on the basis of hard work and end results.
Present Employer : Sarda Energy & Mineral Ltd, Siltara, Raipur, Chhattisgarh
Designation : Office/Asst. in System Dept.
Work Experience :
A.At SEML Form 06/SEP/2006 Till Date
Responsibilities :
Installation of Software and Hardware .
Working in SAP (PP, MM, SD,IM) Module.
Working in ERP Programme .
Assisting In Document Preparation.
Working in MS Office.
B. S. K. Sarawagi Sponge Iron, from 2004-2006 as Supervisor.
C. ALPS TAX FAB, Ltd. From 2001 - 2004 as Bleach Machine Operator.
Computer Proficiency :
Software Skill :
Knowledge : Linux, Tally, DOS, Windows
Expertise : MS OFFICE, Operating System (Windows XP, 98)
Hindi/English Typing
Hardware Skill : Installation of Hardware Devices including (Scanner , Printer, Assembling of Desktop Unit ).
Strength :
1.Proper Documentation.
2.Quick Learner
Basic Qualifications :
Examination University\Board Year Result
PGDCA AISECT, Bhopal (M.P.) 2008 A Grade
B. COM Pt. R.S.S. University, Raipur(C.G.) 2000 52.08%
12th M.P. Board, Bhopal 1997 61.05%
10th M.P. Board, Bhopal 1994 52.02%

[Guest]

PAMPAPATHI.S
Email I.D :- ppp_s5 AT rediffmail.com ,
pampa_s5 AT yahoo.co.in .
__________________________________________________________________________
CAREER OBJECTIVE :
To work in a technology oriented progressive and growing organization on challenging job to elevate my skills and attain a responsible and challenging long-term career.
SUMMERY OF WORK EXPOSURE :
Knowledge of Design / Application software’s Auto CAD, Veri CAD, Pro-E wildfire2.0, U.G Nx3 and C.N.C Programs.
Designing and Drafting of Machine fixture & Structure according to ergonomics Specifications and customer requirement.
Design and Detailing according to the Component and functional base. Preparing Bill of Material for each project.
Having exposure in below mentioned field
- Erection and commissioning projects,
- Breakdown/preventive/predictive maintenance of production related equipments.
- Have exposure in Preventive Maintenance planning and scheduling
- Involving in Mechanical maintenance activities like Hydraulic systems, Pneumatic systems, Conveyor’s, Pneumatic valves, Printing M/C, Flying Auto paster, Folders, Bending M/C, Trolleys, Compressors, CTP M/C, Strapping M/Cs ,Utility system and gear box related works
- Active participant in ISO9001 :2000 activities, continual improvement projects
- Preparation of Quality Plan, Inspection Plan, Quality System Procedures and Work Instructions etc
Salary details :
Current CTC 3.5 lakhs /Annum
Notice period : 1.5Month from the date of receiving offer letter
Educational Qualification :
Name of the Course Board /College Year of pass
SSLC Karnataka Education Board Bangalore April-1994
I.T.I. Diesel mechanic Technical Education Board July-1995
Diploma in Mechanical Engineer Technical Education Board- Bangalore Annual-1999
Professional Qualification :
Name of the Course College / Board Year of pass Percentage
B.E Mechanical
I.P. Engineer Visveshwaraiah Technological university
July-2003 74.2%
Work Experience : Total 08 year’s experience.
- Current Employment : THE PRINTERS (MYSORE) PVT. LTD-
Company Profile : THE PRINTERS (MYSORE) PVT. LTD. is a Karnataka recognized one of the best paper industry ISO 9001 -2000 certified Company , Presently it’s operating five plants in Karnataka.
Position held : – Mechanical Maintenance Executive.
- JOB RESPONSIBILITY WITH PRESENT EMPLOYER :
- Checking the daily breakdowns, rectifications are carried out.
- Preparing the monthly preventive maintenance schedules and work carried out as per schedule.
- As per the AMC schedules maintenance work is carried out. Required tems SR, budget and SOC are prepared.
- Calibration and Maintenance of all measuring equipments.
- Responsible for Quality Control and Assurance activity for all the products manufactured in house and out sourced.
- Preparation of Quality Plan, Inspection Plan, Quality System Procedures and Work Instructions.
- Preparing the monthly breakdowns analysis report and required reports.
- Required items are brought from particular vendor’s trough follow-ups.
- Involving in Mechanical maintenance activities like Hydraulic systems, Pneumatic systems, Conveyor’s, Pneumatic valves, Printing M/C, Flying Auto paster, Folders, Bending M/C, Trolleys, Compressors, CTP M/C, Strapping M/Cs ,Utility system and gear box related works.
- Preparing the monthly shift chart.
- To identify document, the non-conformances and problems related to product, process and quality system and initiate provide, implement and verify the solution through designated channels and implement the quality system as per ISO-9001-2000.
- Previous Employment “NAGEL SPECIAL MACHINES PVT. LTD” Peenya Industrial Area, Bangalore
Company Profile : - NAGEL SPECIAL MACHINES PVT. LTD. is a German based Machines tool manufacturing company. It’s manufactures high quality & different types Honing Machines, super finishing machines and Deep hole drilling Machines.
Position held : Mechanical Design Engineer from 05-05-2006 to 10-10-2006.
- JOB RESPONSIBILITY WITH PRESENT EMPLOYER :
- Designing and Drafting of Machine fixture & Structure according to ergonomics Specifications and customer requirement.
- Design and Detailing according to the Component and functional base. Preparing Bill of Material for each project.
- Required items are brought from particular vendor’s trough follow-ups.
- To identify document, the non-conformances and problems related to product, process and quality system and initiate provide, implement and verify the solution through designated channels and implement the quality.
Handled Projects :-
- Super finishing M/C one of the tape finishing M/C fixture Assembly part drawings, Detailing and Bill of Materials for Assembly, Subassemblies.
- VS-5 Vertical Honing M/Cs Machine Layout, Fixture Layout, Tool Layout, Fixture Assembly and Part Drawings Details(Bridge Plate, Coolant & Guide Bush, Bracket, False Plate, Rotary table, Raiser Block Etc)
- Previous Employment “ELECHEM TECHNIK PVT. LTD” Bangalore.
Company Profile : -ELECHEM TECHNIK PVT. LTD. is a Machines tool manufacturing company. Its manufactures high quality & different types Electrochemical Debarring Machines, Debarring Component washing machines and Company working towards Thermal Debarring Machines.
Position held : Project Engineer from December 2004 to April2006.
- JOB RESPONSIBILITY WITH PRESENT EMPLOYER :
- Designing and Drafting of Machine Structure according to ergonomics Specifications and also Design and Detailing Electrodes & Anode guide units according to the Component and functional base.
- Looking towards Both Anode and Cathode Fixtures are done accordance to customer requirement.
- Preparing Bill of Material for each project And take care of each project assembly’s function and products quality aspect.
- To identify document, the non-conformances and problems related to product, process and quality system and initiate provide, implement and verify the solution through designated channels and implement the quality.
Handled Project :-
- ECM-100A Titan Machine, Component (pine) Fixture & Electrode
- ECM-100A Moog Machine, (End Cap) Component Fixture & Electrode
- ECM-100A Indo Schottle Machine Anode Guide Design
- ECM-300A TATA Machine Anode Guide & Splash Guard Design
- ECM-300A Sriram Machine Structure Design
- ECM-300A KTTM Machine, Bar Apron Bride Electrode Design
- ECM-100A SCL Conrod Machine, Fixture & Electrodes Design
- ECM-300A SAMSER Machine, Honda Shaft Fixture Design
- ECM-100A STANADYNE Machine, Fixture, Anode& Cathode Design.
- KBX-Washing Machine Fixture Design.
- Previous Employment “HYDRO PRODUCTS” Peenya Industrial Area, Bangalore
Company Profile : - HYDRO PRODUCTS is a manufacturing Hydraulic Cylinder, Hydraulic Power Pack, Hydraulic Press, Hydraulic Testing machine, Fabric Cutting Machine etc.

Position held : Mechanical Design & Q.C. Engineer From 01-07-2003 to 1-12-2004.
- JOB RESPONSIBILITY WITH PRESENT EMPLOYER :
- Design & Estimate the cost of Hydraulic cylinders.
- Inspection of Hydraulic cylinders Performance & Quality.
- Responsible for Quality Control and Assurance activity for all the products manufactured in house and out sourced.
- To analyze the Customer Complaints and suitable corrective Action.
- Preparation of Quality Plan, Inspection Plan, Quality System Procedures and Work Instructions
- To implement the quality system as per ISO standard and related company’s quality and procedure manuals.
- TRAINING ATTENDED :
- FESTO Pneumatics seminar program attended in Bangalore
- IFFR seminar program attended in GAO.
- Skill set:
- Design/Application software’s: ------- Auto CAD, Veri CAD, Pro-E wildfire2.0,
U.G Nx3.
- Operating Systems: ---------------------Windows98/200/xp, Linux.
- Application Package: -------------------- MS-Excel, MS-Word.
- Knowledge about: ------------------------ C.N.C Programs.
-