www.iocl.com Gujarat Refinery Recruitment 2011 Indian Oil Corporation Limited : Production, Instrumentation Engineer

[muthukalee]

Indian Oil Corporation Limited, Refinery Division-Gujarat Refinery requires Jr. Engineering Assistants-IV.

INDIAN OIL CORPORATION LIMITED
Refineries Division
GUJARAT REFINERY
(A Govt. of India Undertaking)

IndianOil’s Gujarat Refinery situated at Vadodara invites applications from bright, energetic and result oriented candidates of Indian Nationality for the following likely positions in the Pay Scale of Rs. 11,900/- – 32,000/-.

Post Code : 01 / 2011
Name of Post : Jr. Engineering Assistant-IV (Production)
No. of Vacancies : 30 (Likely Reservation: SC-02, ST-02, OBC-09)

Post Code : 02 / 2011
Name of Post : Jr. Engineering Assistant-IV (Instrumentation)
No. of Vacancies :04 (Likely Reservation: ST-01)

Minimum Qualification and Experience :
For Post Code No. 1/2011 - Jr. Engineering Assistant - IV (Production)
B.Sc. with Chemistry as principal subject and Physics and Math as subsidiary subjects / Diploma in Chemical / Petrochemical Engineering with First Class (Pass Class for SC/ST). The prescribed qualification should be from a recognized Board / Institution / University and as a regular student of full time course.
Minimum 2 years experience in operation (in rotating shift) of pump house, fired heater, compressor, distillation column, reactor in a petroleum refinery, petrochemical or fertilizer / gas processing industry.
Experience should be post-qualification only, excluding training & apprenticeship period.

For Post Code No. 2/2011 - Jr. Engineering Assistant - IV (Instrumentation)
Diploma in Industrial Electronics OR Diploma in Instrumentation Engineering OR Diploma in Electronics & Communication OR Post Graduate Diploma in Instrumentation & Control with First Class (Pass Class for SC/ST). The prescribed qualification should be from a recognized Institution / University and as a regular student of full time course.
Minimum 3 years experience in operation, maintenance and troubleshooting of Distributed Control System (DCS) and Programmable Logic Controllers (PLC) preferably in Petroleum Refinery, Petrochemicals, Fertilizer, large size Power Plant.
Experience should be post-qualification only, excluding training & apprenticeship period.

Candidates are required to send a crossed Demand Draft of Rs.100/- (non-refundable) as application fee in favor of ‘ACCOUNTS OFFICER, GUJARAT REFINERY’, payable at Vadodara along with the Application Form. No other mode of payment shall be accepted. (SC/ST/Ex-Servicemen candidates are exempted from payment of Application Fee).

Candidates should super scribe the Name of Post Applied for & Post Code, on the top of the envelope. The applications are to be sent to: Chief Human Resource Manager, Gujarat Refinery, Indian Oil Corporation Ltd., PO: Jawaharnagar, Dist: Vadodara – 391 320, latest by 15/08/2011.

More Details : http://www.iocl.com/download/Gujarat..._July_2011.pdf

[Guest-IJT]

Name : gayatri patharia
Email : gayatripatharia9 AT gmail.com
Designation / Skillset : instrumentation engineer

Resume :
GAYATRI PATHRIYA
CAREER OBJECTIVE :
To be a part of a dedicated workforce of an organization using the best of my knowledge and available resources.
PROFESSIONAL QUALIFICATION :
- Diploma in Instrumentation Engineering from Govt. Polytechnic, Ajmer B.T.E.R. Board with the 63.15% till 5th Semester.
S.No.
Board/ College
Semester
Year
%
1.
Govt.Poly.College,Ajmer
1st Year
2009
59.48
2.
Govt.Poly.College,Ajmer
3rd Sem
2009-2010
63.92
3.
Govt.Poly.College,Ajmer
4th Sem
2010
64.33
4.
Govt.Poly.College,Ajmer
5th Sem
2010-2011
64.88
- 6th Sem result awaiting.
EDUCATIONAL QUALIFICATION :
- High School from Railway Senior Sec. School Raj. Board in the year 2008 with 54.00% in PCB.
- Secondary School from Railway Senior Sec. School Raj.Board in the year 2006 with 76.00%.
VOCATIONAL TRAINING :
- One month training in HINDUSTHAN MACHINE TOOLS, Ajmer {Raj.}
PERSONALITY STRENGTHS :
- Spirit of team work
- Diligent
- Win/Win attitude
- Self Motivated
EXTRA CURRCULER ACTIVITIES :
- 1 month certificate course in PLC & SCADA.
DECLARATION :
I hereby declare that all above mentioned information is true to the best of my knowledge. I shall abide and adhere to the companies policies, rules and regulations.
Date : (GAYATRI PATHARIA)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4387928
Date & Time : 19th Jul 2011 11:37 AM (UTC)
IP Address : 117.205.31.99
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; GTB0.0; InfoPath.2)
Predicted Country : India

[Guest]

SHUSHANT YADAV
(B.Tech Chemical, VIII Semester)
CAREER OBJECTIVE :
To diligently work for and consistently ascend the corporate ladder in a professionally stimulating and growth oriented organization that can utilize as well as groom my technological, creative and managerial skills.
To acquire a position that affords me the opportunity to bring my technical expertise, problem solving skills and willingness to learn to make an organization successful.
To evolve as a complete human being dedicated to serving the industry, society and humanity at large.

ACADEMIC QUALIFICATION :
COURSE COLLEGE BOARD/UNIVERSITY MONTH & YEAR OF PASSING SPI/MARKS
GATE - 2010-2011 26 out of 100
B. TECH.
(CHEM ENGG)
SEMESTER VIII Institute of Technology Nirma University of Science and Technology june 2011 7.00
B. TECH.
(CHEM ENGG)
SEMESTER VII Institute of Technology Nirma University of Science and Technology december 2010 7.34
B. TECH.
(CHEM ENGG)
SEMESTER VI Institute of Technology Nirma University of Science and Technology June 2010 6.96
B. TECH.
(CHEM ENGG)
SEMESTER V Institute of Technology Nirma University of Science and Technology December 2009 7.00
B. TECH.
(CHEM ENGG)
SEMESTER IV Institute of Technology Nirma University of Science and Technology June 2009 6.46
B. TECH.
(CHEM ENGG)
SEMESTER III Institute of Technology Nirma University of Science and Technology December 2008 6.75
B. TECH.
(CHEM ENGG)
SEMESTER II Institute of Technology Nirma University of Science and Technology June 2008 6.83
B. TECH.
(CHEM ENGG)
SEMESTER I Institute of Technology Nirma University of Science and Technology December 2007 7.13
HIGHER SECONDARY AND SECONDARY EDUCATION :

COURSE SCHOOL EDUCATION BOARD CLASS YEAR OF PASSING PERCENTAGE
(OVERALL)
HSC Woodrow school, Bareilly C.B.S.E First Class 2007 62
SSC Kendriya Vidyalaya IFFCO Bareilly (U.P) C.B.S.E First Class 2005 79.6
COMPUTER SKILLS :
PROGRAMMING LANGUAGES ANSI C, C++
TOOLS AND SOFTWARE Microsoft vision, Microsoft Office
OPERATING SYSTEMS Microsoft Windows 3.x/95/98SE/2000/ME/XP/Vista
INDUSTRIAL TRAININGS :
INDIANS FARMERS FERTILIZER CO-OP LTD.
(AONLA UNIT)
BARELILLY – 243403 (U.P)
IFFCO is the federation of more than 35,000 societies, most of them being village cooperatives spread all over INDIA. Intensive In-plant training at IFFCO that focused on processing & packaging techniques and the machinery & technology used for production of ammonia and urea.

15
DAYS
(JUNE-JULY '09)
1
MONTH
(NOV-DEC ’09)

KUNDAN REFRACTORIES
(NARODA) Did survey of ceramic industry and recover the heat from the kiln and utilize the same to run the spray drier 5
DAYS
(March-10)
THE GREEN ENVIRONMENT SERVICES CO-OP. SOC. LTD.
(VATVA) Objective is to do survey and implementation of CLEANER PRODUCTION in various chemical industries.
Worked under a consultant for GIDC group, vatva, ahmedabad. 6
Weeks
(June-July-10)
INDUSTRIAL VISITS :
INDUSTRY/PLANT GIST OF VISIT EXPERIENCE
NIRMA LIMITED (BHAVNAGAR) Production of salt (both edible and non-edible) from water pumped from sea and also production of toilet soap (Nirma)
NIRMA LIMITED (SAVLI) Production of Soda Ash and Linear Alkyl Benzene (LAB)
NIRMA LIMITED (MANDALI) Production of salt, H2SO4, toilet soap
BODAL CHEMICALS (BARODA UNIT) Production of acids and dyes intermediates
KUNDAN CERAMICS (NARODA) Production of fire bricks and crucible
PROJECTS :
SEMESTER PROJECT
VIII Simulation of ammonia process on ASPEN HYSYS
VII Water Audit
VI Waste heat recovery from ceramic kiln
V Removal Of Arsenic From Water
SORAS- a simple arsenic removal process
SEMINARS DELIVERED :
SEMESTER SEMINAR ON
VII Cleaner production
VI Wind rose
V Emission of VOC’s in Industries
III Self Appreciation
NATIONAL/STATE LEVEL PARTICIPATION :
EVENT AT/ORGANIZED BY INFO
WATER PURIFIER CHEMOZALE ’10 – chemical Engineering Students’ Association, IT-NU (march, 2009) REMOVAL OF ARSENIC FROM WATER SPONSORED BY MISNITRY OF NEW AND RENEWABLE ENERGY
NATIONAL TALENT SEARCH CONTEST CENTRAL INSTITUTE OF GENERAL KNOWLEDGE LEARNING (OCTOBER, 2004) NATIONAL TALENT SEARCH CONTEST MATHEMATICS
SENIOR UN INFORMATION TEST COUNCIL FOR UN INFORMATION, A WING OF USO (AUGUST, 2004) 47TH ANNUAL ALL INDIA UN INFORMATION TEST
NIIT AT SCHOOL NIIT AT SCHOOL-KENDRIYA VIDHYALAYA, BAREILLY (2004) THE COMPLETE IT PROGRAM FOR SCHOOLS
NIRMA TALKIES ROTARACT CLUB OF NIRMA INSTITUTES, HORIZON’08 (JAN, 2008) STOOD 2ND IN SKIT COMPETITION
I.CHANGE INVINCIBLE LEADERS’ LEAGUE-NIRMA UNIVERSITY (MARCH, 2009) DOCUMENTARY MOVIE
RO-BOLF PREVOYANCE’10-ELECTRONICS AND COMMUNICATION ORGANIZATION, IT-NU (MARCH,2010) ROBOTICS EVENT
TELLURICA INGENIUM’10-MECHANICAL ENGINEERING STUDENTS’ ASSOCIATION, IT-NU (MARCH-2010) ROBOTICS EVENT
RIVER RAFTING SNOW LEOPARD ADVENTURE PVT. LTD, SPONSORED BY NATIONAL ADVENTURE FOUNDATION (NAF) ADVENTURE EVENT
ATHLETICS BISHOP CONRAD SCHOOL, BAREILLY DISTRICT LEVEL ATHLETICS COMPETITION
NATIONAL LEVEL SEMINARS /WORKSHOPS/PUBLIC LECTURES ATTENDED :
SEMINARS ORGANIZED BY/UNDER IN
EMERGING TRENDS IN ENVIRONMENTAL TECHNOLOGIES AND IMPACT ASSESSMENT TECHNIQUES
BY H.O.D OF CHEMICAL AND CIVIL ENGG. Chemical Engineering Dept and Civil Engineering Dept., IT-NU March
2010
WORKSHOPS ORGANIZED BY/UNDER DURATION
Heat Exanger
Under CHEMOZALE ’11 organized by Chemical Engineering Students’ Association (ChESA), Nirma University March 2010
COP-15 Under CHEMOZALE ’11 organized by Chemical Engineering Students’ Association (ChESA), Nirma University March
2010
Robotic workshop ISTE students’ chapter, Nirma University September 2007
POSTS/CHAIRS HELD :
- Member of SOCIETY OF PETROLEUM ENGINEERS (SPE)
SPE is an international organization with more than 88,000 members worldwide who are engaged in energy resource development and production
- Chemical Engineering Students’ Association (ChESA) :
- JOINT COORDINATOR (ACCOMMODATION) (2009-10)
- HEAD (HOSPITALITY AND CULTURAL COMMITTEE) (2010-11)
- MEMBER – Indian Society For Technical Education (ISTE) Students’ Chapter
- VICE-CAPTAIN ’CHEMICAL CRICKET TEAM’ in SEM-I (2007-08)
- VICE-CAPTAIN ‘SCHOOL CRICKET TEAM’
- MEMBER- INVINCIBLE LEADER’S LEAGUE (IL2)
- TECHNICAL COMMITTEE MEMBER (2009-10)
EXTRA-CURRICULAR ACHIEVEMENTS :
POSITION EVENT/COMPETITION IN/ORGANIZED BY
2ND NIRMA TALKIES
AT HORIZON INTER COLLEGE YOUTH FESTIVAL ’08 ROTARACT CLUB, IT-NU
3RD DOCUMENTARY MOVIE
ON POLITICIANS IN I. CHANGE ‘09 IL2,
IT-NU
3RD BIZ KIDS
IN I. CHANGE ‘10 IL2,
IT-NU
3RD INTER BRANCH CRICKET NIRMA UNIVERSITY
2ND GROUP SONG CLASS IX
1ST GROUP SONG
CLASS X
3RD GROUP DANCE CLASS VII
3RD SKIT COMPETITION CLASS VII
3RD RELAY RACE CLASS V
MANAGERIAL AND ORGANIZING EXPERIENCE :
- Founder of Invincible Leaders’ League, which is successfully running in NIRMA university since 2009.
- Elected as Vice President of Invincible Leaders’ League for 1 year.
- Got training under a consultant for 1 month in GIDC group, vatva, Ahmedabad.
- Selected as Head for Hospitality And Cultural Committee for organizing national level
- Technical symposium CHEMOZALE’12.
- JOINT CO-ORDINATOR (REGISTRATION), CHESA and responsible for registration of students from other colleges.
- JOINT CO-ORDINATOR (ACCOMMODATION), ChESA and a driving force for organizing the national level technical symposium CHEMOZALE ’11 in the Accommodation/Transportation (Also, active volunteer – CHEMOZALE ’11 AND CHEMOZALE ‘10)
- Vice-Captain of school cricket team
- VICE-CAPTAIN of Chemical Branch Cricket Team and stood third in INTER BRANCH CRICKET COMPETITION.
ANY OTHER DETAILS :
- VOLUNTEER for CHEMOZALE ’10 and CHEMOZALE’11 Organized by Nirma University
- volunteer for i.Change organized in Nirma University
- Involved teaching mathematics and English to children in on the outskirts of Ahmedabad
- Involved in tree plantation on world forest day organized by CHESA, in Nirma University
E-MAIL baadalsings AT gmail.com
07bch057 AT nirmauni.ac.in
LANGUAGES KNOWN English UK, Hindi
HOBBIES Cooking, Net surfing, Music (Instrumentals, Soft Romantic), Driving Cars.
DECLARATION :
I hereby declare that the aforementioned details are true to the best of my knowledge.
Date : / /
Place : Ahmedabad Signature
(Shushant Yadav)

[Guest]

SIMRANJIT SINGH SAINI
Email - : simranjitsingh786 AT hotmail.com
erSimransaini AT yahoo.com
Career objectives : - With technical knowledge and creativity, I aspire to render quality
services keeping my goals in tandem with those of organization. In time
My aim to reach a position of responsibility and challenge.
Education Qualification
- B.TECH in Instrumentation & control engineering from Punjab Technical University (P.T.U) , Secured First Class With 68%Marks. (That Involves Concentration In Process Control Instrumentation Technology Advance Control System , Instrumentation ,Programming, Electronics, Mechanical ,Electrical ,Measurements System, Electrical And Electronics Communication Control, Analytical Instruments)
- 3 Years Diploma in Instrumentation & control engineering from Punjab State Board of Technical Education & Training (P.S.B.T.E.T),
TRAINING & PROJECT PROFILE
1 One month Industrial Training at A.B.C PAPER LIMITED SAILA KHURD (During Diploma)
2 Two months Industrial Training at A.B.C PAPER LIMITED SAILA KHURD (During B.Tech)
3 6 months Industrial Training at ICAT Solution Institute Chandigarh.
(During B.Tech)
Total Experience : - More than 3 years of experience.
PREVIES COMPANY
Organization : - M/S Satia Paper Ltd. Muktsar, Punjab
Designation : - Instrumentation Engineer
Working from : - 15/July/2006 to 15/August/2007 (diploma duration)
Organization : - M/S Malu Paper Ltd Saoner, Nagpur
Designation : - Instrumentation Engineer
Working from : - 01/ June/ 2010 to 25/June/2011
Repotting To : - Manager (Instrumentation).
About the Plant : - M/s MPML, Nagpur is the waste paper based converting group have three units with overall 300 TPD Capacity. Unit 1&2 manufactures Kraft Paper & Unit 3 have Beloit make Paper machine running at 600 MPM with 3500 mm finish Deckle & producing 150 TPD Writing, Printing Paper. It also have ANDRiTZ make double loop De Inking system, Hot Disperser, Coarse & Fine Screening and GL&V make Disc Filters. Both DIP & M/C have Metso make complete DCS system. It also having Triveni makes Extraction cum Condensing turbine of 6 MW Captive Power Plant

Job Responsibilities : - Working in Paper machine (150TPD w/p) & Power plant (6MW).
Working on METSO DCS – Max DNA
- Operation and maintenance of overall Instrumentation of Paper machine & power plant.
- Sound knowledge of time based maintenance and condition based maintenance of instruments in power plan equipment and utilities like Compressor (ATLAS COPCO GA-45).
- Testing and Calibration of Transmitter like LT,PT,FT,DPT (ABB,YOKOGAWA,ROSEMOUNT),Control valve, Load cell, Sensors, Temperature and Pressure gauges through HART protocol & Source calibrator
- Maintenance of RTD, Thermocouple,
- Operation and maintenance of ABB make DCS (800M) & yoko gawa cs3000 dcs system
- Wiring diagram of DCS, Hardware interfacing, Circuitloopdigram, Checking & troubleshooting.
- Working on ABB make PID controller (220)
- Basic knowledge of Electrical Engineering and able to read P&ID and Electrical drawings.
- Monitoring material consumption & Inventory control for Instrumentation items.
- Carrying out preventive & breakdown maintenance of Instruments and DCS system. Identification of critical areas and maintenance need. On the basis of needs assessed, preventive maintenance scheduling and arranging resources and outside job work.
- Planning, procurement installation of the process control equipments and complete Instrumentation system. Troubleshooting and analysis of breakdown & carrying out the corrective and preventive measures for reducing the downtime.
- 1000/3000 from YOKOGAWA its troubleshooting. PLC systems from Allen Bradley and Siemens. AC variable speed Drives
CURRENT COMPANY
Organization : - N.R Agarwal paper Mill Pvt Ltd, Vapi (Gujarat) as an Instrumentation engineer
Designation : - Instrumentation Engineer
Working from : - 01/July/2011 to Till
About the Plant : - ERRECTION & COMMISSIONING paper machine live in
N R Agarwal Industries is setting up 300 T/P writing & printing
Paper manufacturing unit
- Proven record of independently handling the maintenance & utilities, Instrumentation maintenance.
- An excellent performer with demonstrated troubleshooting aptitude in managing maintenance and operations of a wide spectrum of, equipments and components.
- Excellent communication & relationship management skills with demonstrated abilities in mentoring motivated teams/ workforce.
- To study the equipment layouts from the P & ID Drawings
- Designing, scheduling & Procurement all Instrumentation data & requirement for totally DCS based.
EMPLOYMENT DETAILS
- Integral Development Engineers Pvt Ltd. Chandigarh (PB.)
- Location : Chandigarh (Punjab)
- Designation : Instrumentation Engineer
- Period : June 2011 to Till Date.
COMPUTER PROFICIENCY

- Operating Systems : Windows XP, Windows VISTA.
- System Applications : Microsoft Word, Microsoft Excel, Microsoft
PowerPoint
- Plc‘s zelio,micro (make Schneider) micro logics,delta,Wpl,
Hobbies : - Listening soft Music, Traveling, suffering internet & discovery
Channel etc.

DECLARATION : - I hereby declare that the above furnished information is true to
the best of my knowledge and belief.
Date : -
Place : - Vapi

(SIMRANJIT SINGH SAINI)

[Guest]

CURRICULAM VITAE
RAHUL PATELIYA.
E-mail : electrical.rahul1 AT gmail.com

. Professional Summary
- Highly knowledgeable in Electrical static and dynamic machines.
- Performed project in Microcontroller based 3-phase measurement and protection of unbalanced load.
- Possess strong communication, leadership.
- As a hardworking, motivated person, having engineering degree, I am looking for a job wherein I can apply my knowledge and creativity and also learn new technologies
Seminar Delivered :
- Presented a Seminar in College as part of course on the topic “LIGHT EMITTING DIODE” during the 5th Semester.
- Presented a seminar about Equivalent circuit of Transformer and losses in Transformer during the 3rd semester.
Projects Accomplished :
- Title : Three Phase Measurement & Protection.
- Role : Developing of Circuits in Laboratory and Programming
- Duration : Four Months
- Team Size : 2
- Description : “THREE PHASE MEASURMENT & PROTECTION OF THREE PHASE UNBALANCED SYSTEM USING PIC CONTROLLER” using microcontroller PIC16F877in final year
- .Whenever supply exceed the set limit the contactor contacts are opened and motor gets stopped.
- We have used Microcontroller, 2x16 LCD, 12/0/12 500MA Transformer, Diodes 4007-4, CAP 470 UF/100 UF, 5 V Regulator with Heat sink, Tact switches, IC LM 358 Operational Amplifiers, Relay SPDT 12V coil, Contactor 5A/230V, Buzzer, PT 230V/12V AC, CT.
Professional Experience
- Sthapati interior Pvt. Ltd, Ahemdavad
Designation : Project Management and Consultant (pmc)
- Work management as per project schedule and coordinate with client.
- Supervision of A.C ducting lagging and installation as per drawing standard.
- Supervised all electrical conducts, lighting, and data cabling.
- Checking DB penal, transformer penal & load calculation.
- Supervised fire lighting installation, sprinkler adding and relocation, smoke detector cabling, emergency lighting.
- Prepared documentation work and daily process report and co-ordinate with project manager and client.
- Checking bill and material as per standard & specification & Co-ordinate with supplier, sub contractor and civil contractor.
- Job duration (jun2010 to dec2010)
- Rebus interior and pvt. Ltd.
Media city, dubai,U.A.E
AS MEP ENGINEER(JAN 2011 TO FEB 2011)
- Work same as above.
- VAYOLIN ELECTRONICS
Vadodara,gujrat,India
AS MAINTENANCE ENGINEER (march2011 / continue )
- Working with 1 phase induction motors.
- Solve problems regarding to Maintenance and service.
- Also selling and improving efficiency of motors.
- Handel man power.
Education Qualifications
Bachelor in Electrical Engineering, ( 2010)
Faculty of Technology & Engineering,
Maharaja Sayajirao University of Baroda
Vaodara
Gujrat
India
AUTOCAD 2012 (2d & 3d)
3-month course
Hypersoft
Sayajigunj, vadodara
PLC Course (programmable logic control)
(Basic 3 week course)
Industrial Technical Institute ,
Tarsali
vadodara
Automation
Course : basic of electrical (like connection of star-delta ,c.b , starters
Plc(Siemens , Allen brandy) ,scada , panel designing , HMI , variable
drives, motors, instrumentation
full 3 month course
techknow system
sayajigunj vadodara

Strengths
- Management skill
- Quick decision making ability
- Enough courage to communicate with employees
Punctuality
- Adapt any kind of situation
Switch Details
- Expected Salary : As per Company Policy
- Preferred Contact Time : Anytime
- Open for Relocation : Yes
- Open for Relocation to : any where(passport available)
I hereby declare that the information given above is true, correct and complete to the best of my knowledge and belief.
DATE : Signature
PLACE : RAHUL PATELIYA