Piping Engineering Training Pune : www.vit.edu VIT Vishwakarma Institute of Technology

[Admin]

Piping Engineering Training : Pune : VIT : Vishwakarma Institute of Technology
http://www.vit.edu

Vishwakarma Institute of Technology, Pune a highly commendable private institute, occupies a place of pride amongst the premier technical institutes of the western region of India. Established in year 1983, financed and run by the Bansilal Ramanath Agrawal Charitable Trust,Pune. It is affiliated to Pune University. Within two decades, the institute marched towards the pinnacle of glory through its remarkable achievements and laurels in the field of engineering education of a high calibre.

According to Indian mythology, 'Vishwakarma' was a divine architect-engineer. It is believed that He fashioned this world with His rare engineering skill. The Trust adopted this name with a vision to develop engineers of high caliber, who could take up challenges of any type of an engineering job and make it a grand success, guided by originality and professionalism.

The campus boasts of lush green lawns that provide an ambience and a serene atmosphere of ancient Gurukuls far from the madding crowd. It has got 17.625 acres of land, out of which 7 acres as academic building area and 10 acres for playground, hostels and staff quarters. Available built up area for the entire institution is 32,045 sq. mts.

It has at present about 2800 students, 225 faculty members, 67 well equipped laboratories having instruments worth Rs. 9.6 crores and 150 administrative and supportive staff. It has a very strong alumni of students spread all over the world.

The institute offers Undergraduate,Postgraduate and Doctoral (Ph.D.) programs in Engineering.. It has six full-fledged departments having nine branches with faculty who are motivated with a quest to promote engineering and technical education. The faculty members are constantly training themselves by participating in and presenting papers at various national programs in their field of specialisation.

Piping Engineering Course :

Every process plant needs a piping system to be designed with care
The performance of plant depends on efficient transport of process fluid through the pipes according to material and energy balance for a process and this requires a systematic analysis and engineering design methods.
Over the years many such standards and practices for piping system design have evolved and by itself is a major engineering science.
Every engineering and construction company will then need trained manpower to design a piping system.
To impart this initial training is our objective in starting this autonomous course.

Duration and course fees:
The duration of a full time piping engineering course is about twelve weeks i.e. about two and a half months (May extend for free time & few more sessions).
The duration of week end batch is about 6 ½ months (May extend for free time & few more sessions).
Course fees are Rs. 30000.00 per student. (Service charges as tax will borne by the students. There will be 12% service tax + 3 % cess on service tax).
To confirm admission on first come first serve basis pay some token money or full amount following commencement of batch (es).
At least fifty percent feses should be paid in first two weeks and remaining before end of first month.
Fees should be paid by Demand Draft drawn in favor of Vishwakarma Institute of Technology, Pune

Course structure and lecture plan:
The piping department of an engineering and construction company generally begins with the piping and instrumentation diagram (P&ID).
Process department prepares process flow sheet, which begins with the chemical reaction and after carrying out material and energy balance and equipment selection, which is further utilized to prepare a first version of P&ID.
This means that one can now begin actual plant design. Going through steps of plot plan and equipment layout, the next step is to start designing piping system for material transport.
In our course, we will be adopting a building block concept, where we will begin with pipes selected by line sizing and hydraulics of pumps and compressors used to transport material. These pipes are “connected” using pumps and compressors, add to it the valves, safety devices, measuring instruments and control components and first rough sketch of piping structure would be over.
However a scientific and systematic approach is developed over the years and design codes and practices evolved are used to go through a step-by-step procedure to come up with a piping system structure.
Learning this systematic science is the aim of this course. No such structure will be approved by engineers unless its stress analysis is done including stress at the connecting components such as nozzles, flanges, pipe supports and so on.
We will be using pipe stress software to find if designed structure can sustain static, dynamic and combined stresses
General flowcharts for piping design procedures in parts at least are provided during the actual exercises.
Thus, process and piping are becoming a major force in engineering, procurement and construction (epc) companies as part of Engineering IT culture being developed and justify a growing need for qualified engineers to take up this profession.


Vishwakarma Institute of Technology
666, Upper Indiranagar, Bibwewadi,

Pune, Maharashtra,
INDIA - 411 037.
For Admissions Call:
91 - 20 - 2428 3001 /2420 2210 / 2420 2214

For Under Graduate Admissions admissions@vit.edu
For Post Graduate Admissions pgadmissions@vit.edu
For Web site related queries bipin.sule@vit.edu
For other queries principal@vit.edu

[Guest]

NAME C.Ramakrishna
AGE 55Years.
rama_62562 AT rediffmail.com


Educational Qualifications :
Degree Name of the Institution Year of Passing Percentage
Intermediate Board of Intermediate Education, Hyderabad 1971 56.0
B.Sc Andhra University Visakhapatnam 1974 63.5
B.Tech Chem. Tech
Plastics H.B.Technological Institute,Kanpur 1977 69.0

Knowledge of Computers : M.S.Office, Foxpro

Work Experience
Name of the Company Duration Designation Functional Area
Caprihans India Ltd,Thane Oct 77
to
Sept 78 Graduate Apprentice Trainee PVC Films, Polystyrene Sheeting,Decorative&Industrial Laminates
Shivalik Agro Poly Products Ltd,Parwanoo(H.P) Sept 78 to
Dec 79 Production Engineer LDPE films
Sumeet Group Vapi/Nasik Jan 80
to 93 Manager Molding Injection Molded Items
Jain Group,Jalgaon 1993 to 1994 Production Manager Polybutylene Pipes fittings
Anil Chemicals Ltd,Aurangabad 1995 to 1996 General Manager Multi layer Seamless Plastic tubes
Vora Packaging Pvt Ltd,Tarapur 1996 to Nov 2000 Works Manager LDPE Extruded foam sheeting
Qatar National Plastic Factory, Qatar 2001 to 2004 Production Manager LDPE,HDPE films,bags,HDPE,PVC Pipes
Eurocon Building Industries, U.A.E.
Apr2004
to Mar 2005

Plant Manager
Aluminum Plastic Composite Panels
Lootah Industries
U.A.E.
Feb 2006
To Nov2007
Factory Manager Extruded polystyrene foam boards
Just Right Middle
East FZC, U.A.E.
Nov 2007 to Mar 2009
Operations Manager
Aluminum Plastic Composite Panels
Self Adhesive Vinyl films
Biorad Medisys Pvt Ltd,Bangalore Since
Jan 2010 Head Production &Quality Medical Tubes&Surgical Instruments
1. Caprihans India Ltd, Thane : Worked as Graduate apprentice Trainee
For one year in PVC film &Polystyrene sheet manifesting Plants.
Machines Handled : Polystyrene sheet extrusion Plant 3.5 inch dia make Prodex corn U.S.A.
2. Shivalik Agro Poly Products Ltd, Parwanoo (H.P) : Worked for5 months as Production Engineer in LDPE blown film extrusion Line. Installed quality control laboratory for testing films.
Machnies Handled :LDPE blown film extrusion Plant make 4 inch dia make Cosmo Plastics,Italy.Production capacity 5000 kgs/shift.
3.Sumeet Group Vapi/Nasik :Worked for 12 years as Manager Moulding.
manufacture of Plastic Items for Mixies,Vacuum Cleaners&Washing machnes.Developed more than 300 moulds for appliances.
Materials handled :Polycarbonate,Polyacetal,Nylon,PP,ABS, Polyester,
Glass filled Polycarbonate,Filled PP,Nylon & other Engg Plastics etc.
Machinies Handled :SP-80,SP-130,SP180,SP-300,SP-400.Hot runner
Systems,Mould heating systems,Hopper dryer etc.
4. Jain Group,Jalgaon :Worked as Production Manager for one year in Jain Vanguard Polybutylene Ltd an Indo U.S joint venture company in the manufacture of Polybutylene Pipes&Fittings.Later worked in Jain Irrigations Systems Ltd.Developed Polybutylene pipes & fittings first time in India.
Materials handled :Polybutlene,Thermoplastic Polyurathene,PBT glass Filled,Polycarbonate Glass filled,Polyacetal ,etc.
Machinies Handled :Klockner Ferromatic Injection Moulding machine FR-110,DEMAG 85,125,200,250,Pipe Extrusion Lines make Davis Standard Screw Dia 4 inch.Melt Gear Pump.
5. Anil Chemicals Ltd,Aurangabad :worked as General Manager
Operations for one year.Commissioned Multilayer seamless Plastic tube plant at Auragabad consisting of Multilayer seamless tube extrusion Plant from Breyer,Germany,Shoulder moulding machine from AISA,Swizerland,6 colour Offset printing machine Polytype U.S.A. Also Installed quality control laboratory for testing tubes.
6. Vora Packaging Pvt Ltd,Tarapur :Worked as works manager in manufacture of LDPE Coextruded foam sheeting for four years.
The plant is developed with indigenous technology with gas injection Pump.Also installed a laboratory for testing finshed products.
7. Qatar National Plastic Factory,Qatar :Worked as Production manager in the manufacture of LDPE,HDPE films,bags,PVC Pipes,HDPE Pipes for one years.
Machines Handled : Machines Handled:PVC pipe extrusion lines,Klockner Windsor -2 nos,Kabra Extrusion Technic-2 nos,Maplan-1 no,Thyssen plastic machinery-1 no,HDPE pipe extrusion lines,Kabra Extrusion Technic-2 nos,Bandera 1no.LDPE,HDPE&PP film extrusion lines,Cosmo Plastics120&coex65 one each,Italaworks 100&80 one each,Ding Kuen 45,coex 45,50 one each,bag making machines,Italaworks&Hemmington 2 nos each.Flexographic film printing machines Klina&DPT 1510 one each. Plastic waste recycling machine, DingKuen.
8. Eurocon Building Industries, Ajman U.A.E. : Worked as Plant Manager for one Year Installed Aluminum Composite Panel manufacturing machine. Also installed laboratory for testing.
Machines Handled : Plastic sheet extrusion line, Aluminum Foil lamination unit.
9.Lootah Industries, Ajman,U.A.E :Worked for two years as Factory Manager. Commissioned Extruded Polystyrene Foam Board Plant &Installed Quality control Laboratory for finished product testing.
10. Just Right Middle East FZC, Dubai, U.A.E : Worked as Manager Operations for about two years.Installed Aluminum Composite Panel manufacturing plant Self Adhesive Vinyl film manufacturing plant.
11.Biorad Medisys Pvt Ltd : Working as Head Production& Quality in Manufacture of Medical tubes Since Jan 2010.