www.artson.net Engineering Ltd Mumbai Nashik : Planning Engineer / QA/QC ENGINEER

[Admin]

Artson Engineering Limited is one of the leading Design, Engineering, Procurement & Construction Contracting Company engaged in the Oil, Gas & Hydrocarbon Industry with specialized expertise in executing Fuel/Oil storage tanks and handling systems in India & Abroad.
Artson’s manufacturing division is engaged in manufacturing various equipments in carbon steel, stainless steel & aluminum.

QA/QC ENGINEERS
Location - Jamshedpur
Degree or Diploma holder in Mechanical Engg. with Level-II certificate of approved Agency in NDT testing with 5-7 years experience in the similar field. He will be responsible for coordinating with Third Party Inspection Agency & Client independently.

ENGINEERS (Execution):
Location - Jamshedpur
Degree/Diploma holder in Mechanical Engg. with 4-5 years experience in structural field & able to read drawings, control and lead a team

ENGINEERS (Planning/ Billing):

Location - Jamshedpur

Degree/Diploma holder in Mechanical Engg. with 4-5 years experience in structural field & able to operate with MS Project / Primavera - planning software, able to read drawings & do work measurement.


SUPERVISORS
Location - Jamshedpur

Diploma in Mech. Engg with 7 years experience in relevant field & able to handle workmen independently to achieve planned production targets.


STORE KEEPER:

Location - Jamshedpur

Any graduate with 4 years experience in handling tools/tackles, machineries, consumables, spare parts related to fabrication industry. Well versed with computer & documentation. Should be able to maintain accurate inventory of material and various stores registers. Logistics experience will be preferred.

ADMINISTRATION OFFICER
Location - Jamshedpur

Any graduate with 4 years experience in relevant field, with through computer knowledge. Should have fair knowledge of Contract Labour Management, statutory compliances and various Labour/industrial laws.


ACCOUNTS OFFICER:
Location - Jamshedpur

Commerce graduate with ICWA having minimum 5-6 years experience in similar industry. Should have knowledge of sales tax, service tax, excise, and shall be responsible for all commercial/ accounts & finance functions.


SAFETY OFFICER/SUPERVISOR
Location - Jamshedpur

Degree / Diploma in Fire and Safety with min 4-5 years of experience in similar industry. Candidate should have in-depth knowledge about construction safety.


MECHANICAL DRAUGHTSMAN:
Location - Jamshedpur
ITI/NCTVT/ Diploma in Mech Engineering with around 4-5 years of work experience in preparing structural fabrication drawing on AUTOCAD, Preparation of Bill of Material etc.


MAINTENANCE STAFF:
Location - Jamshedpur

Candidate should have deep knowledge about maintenance of machinery required for Fabrication industry; with 4-5 years experience.

Planning Engineer
Location - Mumbai/Nasik/Batinda/Kuwait

Graduate Mechanical Engineer with around 5 to 8 years of experience in Construction Industry. Should be well versed with Primavera 6 and other related planning software. Preference will be given to candidates who have worked in the Oil & Gas Sector.

QA/QC Engineers
Location - Rajasthan/Batinda/Kuwait

Degree or Diploma Holders in Mechanical Engineering with Level II certificate of approved agency in NDT testing & well versed with ASME/API as well as BS codes. Should have 4-9 years experience in Mechanical/fabrication fields. Preference will be given to candidates who have worked in Oil & Gas sectors.

Store keeper
Location - Rajasthan

Any Graduate with around 5 to 6 years of work experience in stores department of a construction company. Knowledge of Stores Records, Reciepts & Issue Systems and familiarity with Mechanical & Construction materials. Should able to function in a computerised enviornment.

Mechanical Draughtsman
Location - Mumbai

ITI/NCTVT/ Diploma in Mech Engineering with around 2 to 7 years of work experience in preparing Fabrication Drawing, Piping Drawings etc using AutoCAD.

Trainee Category : Engineers/Draughstman/Human Resource
Location - Pan India

Degree/Diploma in Mechanical Engineering for Trainee Engineers
ITI/NCTVT with certification in AutoCAD for Trainee Darughtsman
Degree/Diploma in HR Management from a Premier Institute for Trainee HR
Candidates meeting the above job profiles may send their CVs mentioning the position applied for in the subject line with current and expected CTC at hr@artson.net
Alternatively candidates can send their CV’s at the Regd. Off address mentioned below.

Regd. Off: Rang Udyan, Building No.2, 1st Floor, Sitladevi Temple Road, Mahim (w), Mumbai – 400 016

Nashik Works: D-5, MIDC, Ambad, Nashik

http://www.artson.net/careers.html

[Guest]

CURRICULUM VITAE
Objective
To be a part of a vibrant organization on a long-term basis, which provides opportunities for growth, learning new and emerging technologies, utilizes and enhances my skills to meet organizational goals. Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging & creative environment.
Name : NETRADEEP P. CHAUDHARY
Email : - netradeepchaudhary AT gmail.com , netradeepchaudhary AT yahoo.com
Total Industrial Experience : AT 6.2 Years,
Professional Qualification :
Bachelor in Mechanical Engineering : from [Amravati University, Amravati Maharashtra] With First Class [70.28%] in Final Year in [2004].
Aggregate : 63.28%
Computer Knowledge
Platforms Windows98/2K/XP/VISTA, Windows 7
Operating Systems Windows,
Word Processors M.S. Word, Acrobat Reader.
Spreadsheets M.S.Excel.;SAP
Presentation M.S.Powerpoint.
CAD – CAM Knowledge
- AutoCAD 14 – 2008
Academic Project Details
B. E.Project Delivered on : -Name: -PC Controlled Milling M/c.
B. E Seminar Topic : -Engine less Car.

Career Related Work Experience :
Previous Experience
Engineer in Project and maintenance with Gas Equipment and services co. Doha Qatar. (GASCO) From 12 Nov. 2007 Up To 24 March 2011.

Organization :-At the heart of GASCO’s operations are a team of highly qualified and well-experienced engineers, supervisors, technicians, commercial and field personnel. The dedication and commitment of the team combine with their skilled expertise in providing cutting edge solutions for all industry needs. The company has a special taskforce well equipped to handle all kinds of round-the-clock emergency situations. No wonder, today one can find the name ‘GASCO’ associated with the most of the leading projects in the Qatar and on the authorized contractor list of leading establishments like WOQOD, Department of Civil Defense and Hamad Medical Corporation.
Major Responsibilities :
- Project Co-ordination
- Familiar with NDT like DP testing, MPT, UT, Radiography etc
- Preparation of material submission and other technical submittals
- Preparation and checking of drawings
- Getting approvals from local authority before starting the project
- Attending project co ordination meetings.
- Pressure Distribution system.
- Commissioning of Gas control panel and gas detection system.
- Sprinkler system.
- Responsible for installation of L.P.G. tanks.
- Installation of Vaporizer.
- Erection of Filling line
- Fabrication of Supply line.
- Fabrication and erection of piping and their related structural supports.
- Erection of all static and rotating equipments.
- Preparation of weekly and monthly planning to achieve the target.
- Inspection of all execution activities as per isometric, P&ID drawings.
- Issuing and checking of materials required.
- Manpower handling and their job distribution.
Major Projects Completed :
- Installed and commissioned 25,000liters – 1 L.P.G. tanks, 1 Vaporizer with piping network and fire fighting system for Future Pipe Industries at Dam am Saudi Arabia.
- Installed and commissioned 120,000liters – 3 L.P.G. tanks, 2 Vaporizer with piping network and fire fighting system for New Doha International Airport – Doha – Qatar.
- Installed and commissioned 40,000 litres, 2 L.P.G. tanks and 2 Vaporizer with piping network for Hyatt Regency, Doha, Qatar.
- Installed and commissioned 22,000 litres L.P.G. tank and vaporizer with piping network for Emirates Extrusion Factory, Doha, Qatar.
- Commissioned centralized gas system with gas detection system to residential buildings like Barwa, Abdul Salam Al Rafi Building (G+7), Qatar Real Estate (G+4),
Past Experience
Suzlon wind farm services Ltd. (ISO 9001 :2000) from 24 /11/ 2005 To 07/10/2007.

Organization : An MNC named Suzlon wind farm Services Ltd. Dealing with wind power
Generation having turnover more than 3000 crores, having various site in India &
USA. The company is one of the market leaders in wind power generation
Having rank 3 in global market
Location : Dewas, MP.
Role : Site In-charge
Team Size : 19
Profile : Operation & Maintenance of wind turbine generators. Erection and commissioning

Responsibilities involved : -
Implementation of Preventive maintenance of control panel, power panel, Generators, motors, cables, switchgear equipment of HT Yards as C.B., C.T., P.T., Isolators, HT control panel, S.T. & D.T. Maintenance of transmission line, Execution of new modifications, machines operation monitoring, control pitching of blade & yawing, planning & control of 5S, OHSAS, & ISO activities, Maintenance carryout as per schedule (Quarterly, Half yearly, Yearly). Maintain the QMS. Maintaining Records of short supplied items, Internal & customer inspection reports, checklist, site reports, Customer complaint reports, monthly audit reports & Maintain calibration reports of electrical & mechanical equipments. Handle Manpower in a proper manner. During the training, I was able to to see blade manufacturing unit and assembly plant at Daman, Various site activities at Supa, Satara, and Dhulia, Including induction training at Pune.

Working Experience
- Operation & Maintenance of Wind turbines, control panel, power panel, HT yard equipment
& detect the fault in circuit.
- Billing of Material and equipment list.
- Estimation & costing.
- Making As built drawings.
- Time to time Turbine specific discussion with Client
- Attend the ISO External audit as auditee.
- Maintain & implements the QMS & OHSAS

Engineering Support
- Technical support during purchasing for finalization of specifications.
- Engineering support during Modifications.
- SAP (ERP) support for material master.

Past Experience
Simplex Engineering & Foundry Works Ltd, Bhilai CG. India, from 3 may 2004 to 20 Nov. 2005.
Job Profile : Worked as a Trainee Mechanical Engineer in Planning Department
Nature of Job : Generating the total material requirement for the plants and equipments to be supplied & to govern the production process in line with the cost, quality and time as per the agreement agreed with the customer.
My Responsibility :
Issue of production schedule to plant and keeping track of actual production to ensure compliance to schedule as per plant condition. Preparation of Raw Material Requirement for the manufacturing of the items as per drawings, preparation of production cum completion schedule to cope-up with the time schedule stipulated in the work order, man power planning, machining programmed and quality control as per the Quality Acceptance Plan. Preparation of Material Reconciliation statement taking into cognizance of the actual material consumed during the actual process of manufacturing.
Location : Bhilai CG.
Role : Mechanical Engineer in Planning
Team size : 7
Area of Interest
- Projects Work
- Design
- Testing & commissioning
- Maintenance
Skills and competencies
- Coordination
- Leadership
- Communication
- Abreast with the latest developments in project management techniques
- Ethical
- Holding a valid India. & Qatar Driving License.

[Guest]

RESUME
DEEPAK DHONDU MORE
Email :- deepak_more1 AT rediffmail.com
deep_more24 AT yahoo.com / moredd1981 AT gmail.com
B.E. Mechanical from North Maharashtra University.
OBJECTIVE :-
I am looking for a carrier in Design that gives more than enough challenges and offers an opportunity to utilize my current theoretical and practical knowledge so that I could learn new things. I would like to work in an organization that gives scope for professional advance development.
CURRENT LOCATION :- Nashik
EDUCATIONAL BACKGROUND :-

Division Divisional Board/ University Year Of Passing Percentage Of Marks Grade
B.E MECH North Maharashtra University June 2004 65.78 First
D.M.E Mumbai Board Jully 2001 70.98 First
S.S.C Pune Board June 1996 74.80 First

OTHER QUALIFICATION :- AUTOCAD-2010 , Pro/ENGINEER(Wildfire 2.0), SOLID
EDGE (V18), MS OFFICE, EXCEL.

PROJECT WORK :- Brake Liner Friction Test Rig.
ELECTIVES :- Automobile system.
EXPERIENCE :-
- As a Jr. Engineer in Asia Automotive Ltd (Nashik) from 28 Jan 2010 to till date.
Profile : - Inspection & drafting 2D & 3D models of electrodes, gunarms, casting parts used in automobile résistance welding application.
Product : - Copper Alloyes.
- As a Trainee Design Engineer in Techno force India Pvt. Ltd (Nasik) from 6 March 2009 to 30 Oct 2009
Profile : - Designing of parts & making 2D & 3D modeling of machine parts & assembly
Product : - Pressure Vessels
- As a Trainee Design Engineer in Shakti Mining Equipments Pvt. Ltd. (Nashik) from 17 Sept 2007 to 1 March 2009.
Profile :- 2D & 3D modeling & assembly of cranes & issuing of related drawing for Production .
Product :- Hydra cranes 11T, 12T, 14T & Economical models like 12DX &
TX model.
- As a Jr. Engineer in Supermax (Tigaksha Metallics) Pvt. Ltd. (Thane) from
7 Dec. 2005 to 16 Sept. 2007.
Profile :- Online inspection of blades.
Product :- Double edge shaving blades, Barbers blade, Handles like Ultimate,
Syrine, Confidence, Style & their magazines.
- As a Graduate Apprentice in GKW Nettlefolds Ltd. (Bhandup) from 4 April 2005 to 6 Dec. 2005.
Profile :- Apprentice engineer
Product:- Self tapping screw, Rivets, Safety pins, Wooden screws.