www.rites.com Jobs 2011 RITES Limited : Mechanical, Electrical General Manager

[muthukalee]

RITES LIMITED
(A Govt. Of India Enterprise)

RITES Ltd., a premier consultancy organization proposes to recruit suitable technical personnel in the following grades and disciplines to meet their requirements. Applications are invited from dynamic and result oriented professionals for the following posts on regular and permanent absorption basis in the level of Additional General Manager, Joint General Manager and Deputy General Manager in Mechanical and Electrical disciplines. Candidates have good prospects of growth in the Company. Reservations for SC/ST/OBC / Ex-Serviceman and Physically Handicapped persons would be provided as per extant Govt. Orders.

VC No. : 74/11
Post : Additional General Manager
Discipline : Mechanical
No. of posts : 03
IDA pay scale : 43200- 66000
Upper age limit as on 01.01.11 : Not above 53 years

VC No. : 75/11
Post : Jt. General Manager
Discipline : Mechanical
No. of posts : 05
IDA pay scale : 36600- 62000
Upper age limit as on 01.01.11 : Not above 50 years

VC No. : 76/11
Post : Dy. General Manager
Discipline : Mechanical
No. of posts : 02
IDA pay scale : 29100- 54500
Upper age limit as on 01.01.11 : Not above 45 years

VC No. : 77/11
Post : Jt. General Manager
Discipline : Electrical
No. of posts : 01
IDA pay scale : 36600- 62000
Upper age limit as on 01.01.11 : Not above 50 years

VC No. : 78/11
Post : Dy. General Manager
Discipline : Electrical
No. of posts : 01
IDA pay scale : 29100- 54500
Upper age limit as on 01.01.11 : Not above 45 years

Qualifications :
First class degree (2nd class for SC/ST/OBC) from a recognized University/ Institution or AMIE Section A&B in Mechanical Engineering
First Class degree (2nd class for SC/ST/OBC) in Electrical Engineering from recognized Institution

Selection Process :
The final selection will be through written test and/or interview of short listed candidates.

Candidates fulfilling the criteria laid down for the above should send their applications on the standard application format available on the RITES website : www.rites.com to Manager (P)/ Rectt., RITES Ltd., RITES Bhawan, Plot No.1, Sector-29, Gurgaon – 122001 (Haryana) by 25.07.2011. Applications received after the due date will not be entertained. The applicants should enclose copies of qualifications and experience certificates, testimonials and a recent passport size photograph. Those employed with Govt. organizations/ Departments should apply through proper channel or furnish No-Objection Certificate from the Parent Department at the time of selection.

Applicants should superscribe on the cover the Vacancy code No. & Post Applied for. Those not conforming to the proforma or without / unclear certificates or having ambiguity will be summarily rejected.

[Guest]

ARPITKUMAR P PATEL
B.E. (Electrical Engineering)
E-mail : arpitpatel561 AT yahoo.com
CAREER OBJECTIVE :
A position in the accounting field where excellent analytical and technical skills can help to improve the company's profitability.
ACADEMICS :
Course School / College Board / University Year Of Passing SPI
8th Semester A.D.Patel institute of technology Sardar Patel University Jul-2011 Give Exam
7th Semester A.D.Patel institute of technology Sardar Patel University Jan-2011 7.29/10
6th Semester A.D.Patel institute of technology. Sardar Patel University Jul-2010
7.60/10
5th Semester A.D.Patel institute of technology Sardar Patel University Jan-2010
6.93/10
4th Semester A.D.Patel institute of technology Sardar Patel University Jul-2009
6.38/10
3rd Semester A.D.Patel institute of technology Sardar Patel University Jan-2009
6.32/10
2nd Semester A.D.Patel institute of technology Sardar Patel University Jul-2008
4.69/10
1st Semester A.D.Patel institute of technology Sardar Patel University Jan-2008 3.18/10
H.S.C
Anklav High School
Anklav
Gujarat Higher Secondary Education Board 2006-2007 65.00%
S.S.C Sardar Patel Vidhyalaya Gujarat Secondary Education Board 2004-2005 71.42%
SUBJECTS OF INTEREST :
- Power Systems
- Electrical Machines
PROJECTS :
- Microcontroller based single phase step-down cycloconverter.

[Guest]

Atul Sudhakarrao Kandharkar
E-Mail : atulkandharkar AT gmail.com

To get aligned with a reputed company to gain a deeper insight into the present education and utilize my skills and abilities in the industry that offers professional growth while being innovative and flexible
PROFILE BRIEF
- Pursuing B.E. (Mechanical) from M.G.M’s College of Engineering Nanded.
- An effective communicator with excellent relationship building & interpersonal skills. Strong analytical, problem solving & organizational abilities.
- An Active Organiser and Participant in the Extra-Curricular Activities.
PROJECTS UNDERTAKEN
Project Title Final Year Project- Customization of Die-Set in CATIA V5.R17 using VB
Description : Project involved Customization of “Four Pillar Die-Set”, in which we interface Excel-sheet which contains different dimensions which are required for designing of Die-set. And these dimensions are of ‘H & J Associate’ standard .For the fulfilment of project idea we used ‘CATIA V5 R17’ with the help of simple GUI tool, ‘Visual Basic’. This application helps us in minimising the repetitive task of modelling, by making them simpler by designing in an automated manner. And help us in minimising valuable time which is taken, for making slight variations in a simple design.
SCHOLASTICS
Year Period Percentage University
3rd year June 2010 66.67% SRTMU Nanded
2nd year June 2009 59.28% SRTMU Nanded
1st year June 2008 68.79% SRTMU Nanded
H.S.C. June 2007 78.66% Latur Borad
S.S.C. June 2005 84.66% Latur Borad
2011 Pursuing B.E. in Mechanical from MGM’s College of Engineering Nanded.
2007 XII from NES Science College, Nanded, Maharashtra State Board with 78.33%.
2005 X from Mahatma Phule High School, Nanded Maharashtra State Board with 84.66%.
EXTRAMURAL ENGAGEMENTS
- Winner of Business Planning Competition in “VisioTech 2010” A National Level Technical event held at M.G.M’s College of Engineering Nanded.
- Presented a Technical Paper titled “Product Lifecycle Management” in “Pragyaa 2010” a National Level Technical Event held at SGGSIE&T, Nanded.
- Presented a Technical Paper titled “Solar Tower” in “VisioTech 2010” a National level technical event held at M.G.M’s College of Engineering, Nanded.
- Presented a Business Plan in “Pragyaa 2010” a National Level Technical Event held at SGGEIE&T, Nanded.
- Member of Winning Badminton Team at Inter College Tournament 2008 & 2009.
- Runner-Up of Lawn Tennis Doubles at college level.
- Runner-Up of Badminton Doubles at college level.
- Member of M.G.M’s Centre for Astronomy & Space Technology.
IN PLANT TRAINING

Completed in plant training in “Endurance Technologies Pvt. Ltd” located at Aurangabad, for 30days.This organization is one of the leading organization in the production of pressure Die casting.

[J SAI KRISHNA]

RESUME
J.SAI KRISHNA
E-mail :saikrishna1287 AT gmail.com
CAREER OBJECTIVE :
To obtain a challenging career in your esteemed organization that gives scope to update and enrich my knowledge and skills in accordance with latest trends and be a part of the team that dynamically works towards growth of organization.
EDUCATIONAL QUALIFCATION
- B-Tech in mechanical Engineering (2007-2010) from M.I.S.T
- Diploma in Automobile Engineering (2003-2006) from S.G.M Govt. polytechnic
- S.S.C from GEETHA High School Shah-Ali-Banda, Hyd-65.
COMPUTER SKILLS :
- AutoCAD
- Pro/Engineer
PERSONAL SKILLS :
- Ability to learn new things quickly
- Eagerness to prove always the best and taking responsibilities and setting goals to accomplish them with an amicable nature are my strengths

[rajdivya.n]

I send the resume to u pl invite me

[rasumalla.hemalatha]

R.HEMALATHA

EDUCATIONAL QUALIFICATIONS :
Course University/Board College/School Year of
Passing % of
marks
B-Tech
(EEE) JNTU, Hyderabad. St Martins Engineering college, Dhullapally. 2011 64%
Intermediate
(M.P.C.) Board of Intermediate, A.P. Vijetha junior college,jntu 2007 73%
S.S.C Board of Secondary Education, A.P. Balanagar high school,balanagar 2005 70.5%

TECHNICAL SKILLS :
Programming Languages : Basics of C
Tools & Operating Systems : Ms-Office, Windows 2000/XP./7

STRENGTHS :
- Patience, friendliness, adaptability and confidence to achieve goals.
- Positive thinking and self confidence.
- Ready to learn new things and contribute to the growth of organization
PROJECTS :
MINI PROJECT TITLE : speed synchronization of two dc motors (pwm technique)
.
MAIN PROJECT TITLE: Hybird Active power filters

[Manoj.V]

MANOJ.V
Email : manooj.v AT gmail.com

CAREER OBJECTIVES :
A challenging position in a professional organization where I enhance my skills and strengths in conjunction with the company’s goals and objectives.
ACADEMIC PROFILE :
2008-2011 : B.E. Electrical and Electronics Engineering – Karpagam College of Engineering,Coimbatore- Anna University (Coimbatore) – 7.80 CGPA up to 8th semester
2005-2008 : Diploma- Sri Ramakrishna Mission Vidyalaya Polytechnic College-94.91%
2005 : SSLC – Brindhavan Vidyalaya Matriculation H.S.S,coimbatore-73.63%
INDUSTRIAL EXPOSURE :
- Under went 15 days of InPlant training in Suguna Pumps & Motors,coimbatore
- Under went InPlant training for 3 days in Mettur thermal Power plant , MetturDam
- Under went InPlant training for 14 days in Signal & Telecomunication Workshop, Southern Railway, Podanur
AREA OF INTEREST :
- Electrical Machines
- Generation, Transmission & Distribution
PROJECT :
- project in “Low cost high efficiency linear induction motors”
ACHIEVEMENTS :
- Twice Won the first prize in state level dance competition conducted by Ramakrishna Mission vidyalaya polytechnic college ,Coimbatore
- Won second prize in dance competition conducted by Sakthi polytechnic college, Erode(Dt)
- Received Certificate Of Merit for Having Secured SECOND Rank in the Examination
SEMINARS :
- Attended 3-DAYS RESIDENTIAL YOUTH CAMP ON ACHIEVING HUMAN EXCELLENCE conducted by Ramakrishna mission vidyalaya PTC, coimbatore
- Participated in the workshop on “XNA and Gaming “by Microsoft at P.S.G institute a National Technical Symposium.
STRENGTHS :
- Good communication skills, good team leader and capable of handling pressure with an even mind

[Shaik Azgar]

Shaik Azgar

E-mail :azgar06 AT gmail.com
azgar06 AT yahoo.com
The Recruitment Manager,
Human Resource Dept,
Dear Sir,

Sub : Application for .
In the interest of seeking a career opportunity in your esteemed organization, I am forwarding my CV for your kind perusal and consideration.
As narrated in my CV, I have completed Mechanical engineering from Jawaharlal Nehru Technological University, Anantapuram, and Andhra Pradesh. India.
Before I am working with Continental Engineering Corporation as an Assistant Engineer (Mechanical). Have equipped me with a multitude of skills, and I would like to continue learning, enhancing my caliber that will enable me to contribute more for organizational growth.
My qualifications and experience, coupled with my enthusiasm and drive will definitely qualify me as a suitable candidate.
Should you need any further clarifications please contact me on 0091- 9493-457472, 0091-8143-232292 or email azgar06 AT gmail.com Please be informed that I am available for employment immediately.
Thank you for consideration.
Objective :
A Challenging career in an organization where I can enhance in the field in conjunction with the company goal and objective and to stay abreast of the latest trends and technology to meet the dynamic requirements.
Technical Education :
- B.Tech (Mechanical Engineering) from JNT University,Anantapur.with 58.43% in 2005-2009
- Diploma in Computer Hardwearing & Networking Form Government of Andra Pradesh, Hyderabad. With A+ (Certificate) in 2004-2005.
Education :
- Intermediate(MPC) from Board of Secondary Education, Hyderabad with 50% in2002-2004
- 10th (School Of Secondary Education), Hyderabad with 64% in 2002
Total Work Experience :
- Period : March 2011 to till date.
Employer : RK Infra & Engineering Works.
Position : Mechanical Engineer (Plants)
Job Responsibilities :
- In-Charge of P&M Dept, & Supervising of workmen in Auto Heavy Vehicles Garrage, plants (Batching plant, Hot Mix plant, Crusher)& Machinery
- Period : June 2009 to Feb 2011.
Employer : Continental Engineering Corporation.
Position : Assistant Mechanical Engineer (Plant & Machinery), Production Reports Maintains.
Key areas of experience :
Knowledge on concrete Batching plants, civil construction equipments like concrete mixers, Hot mix plants.
Job Responsibilities :
Maintenance & Operation : Planning and effecting preventive maintenance schedules of various machinery and Equipments to increase machine up time / equipment reliability; thereby accomplishing planned production targets with in budget. Proactively identify areas of obstruction / breakdowns and take steps to rectify the equipment through application of trouble shooting tools. Coordinating material / spare parts planning related activities encompassing identification of vendors, requirement of specification and offer evaluation. Planning and executing capital procurement.
- In-Charge of P&M Dept, & Supervising of workmen in Auto Heavy Vehicles Garrage, plant & Machinery
- Take care of ALL Equipments / Working Status /Maintenance Scheduled / Periodical maintenance of all plants& Equipments
- Checking of all Equipments periodic Maintenance & Status
- Attend Break down Equipments As per M/C Condition Estimating required spares & Prepare Purchase Requisition form.
- Preparing Daily P&M reports and send to H.O (Corporate office) by E-mail.
- Purchasing of Spares for P&M, if necessary to help Purchasing Dept for Identification of Spares
- Controlling of P&M staff as per site requirement.
- Preparing hired equipments monthly bills. Prepare Hired equipments Work orders
- Writing LOG books for Every Equipment. Issuing Diesel, Lubricants, Spares etc.
- Take care of vehicles maintenance scheduled of Lubricant Oil Servicing &Diesel filters & Lubricant Oil filters replacement etc.
PLANT AND MACHINERY :
- Schwing Stetter CP30 Concrete mixing Batching Plant.
- Speco Limited CP170(TPH) Concrete Hot mixing Plant
STRENGTHS :
1 Hard working, Punctuality, sincerity.
2 Determination and dedication.
3 Positive thinking and result oriented approach.
4 Willingness to learn new things
5 Good Listener & Adaptive

[Guest]

VINEET BAJPAI
Email : vinbaj AT gmil.com
Career Objective
To gain employment with a company where my leadership, experience and knowledge can be used effectively.
Technical Skill Set
Programming Skill : Auto - Cad
Operating Systems : WINDOWS 98/2000/XP
Educational Qualification
B.E. in Electrical Engineering , expected in August 2011 from Padmashri Dr. Vithalrao Vikhe Patil College of Engineering, Ahmednagar, Maharashtra, from University of Pune.
Detailed Qualification
Exam Board/ University Percent of marks
S.S.C UP State Board 53%
H.S.C UP State Board 59%
B.E. Pune University Waiting For Result
Project and Details

Title : - Manufacturing and Testing of Current Transformers and Potential Transformers.
Responsibilities : - Collecting details, Manufacturing, Framing of the whole Instrument and Testing in each phase.
Sponsored By : - Ergon Power, MIDC, Ahmednagar, Maharashtra.

Training Experience :
a) 1 month training in BROOK CROMPTON GREAVES COMPANY.
PROFILE : 3ph INDUCTION MOTORS
b) 2 months training in JRP Electricals & Contractors.
PROFILE: Power Transmission & Distribution

[Guest]

Julee Sahu,
* juleesahu AT gmail.com
________________________________________
CAREER OBJECTIVE
Continuously enhancing my Technical skills through learning and working in an environment where I can get the freedom to express myself.
1
ACADEMIA
B.E. Indira Gandhi Engg College Sagar (M.P.) 2010 72.09%(degree)
(mechanical engg.) R.G.P.V. University Bhopal (M.P.)
12th B.S.G.M. Chandla Chhatarpur M.P. Board 2006 79.67%
10th B.S.G.M. Chandla Chhatarpur, M.P. Board 2004 73 %
ACADEMIC PROJECTS
MAJOR-
Title : Design Of Solar Tower
Duration : 3 Months
Specification : Solar tower is a hybrid power generation system uses both solar & wind energies. It is actually a vertical axis wind turbine incorporated with duct system & chimney which enhances it’s performance by using solar energy.
Scope : This system is used for electricity generation In India this system is under development & not found full scope till yet.
________________________________________
MINOR-
Title : Wind Mill Pump
Duration : 3 Months
Specification : This is a system based on wind energy & used for pumping water from a depth without converting wind energy into electricity.
ORGANIZATIONAL TRAINING
Organization : Ordinance Factory Khamaria Jabalpur(M.P.)
Duration : 2 Weeks
Organization : G.E.I. Industrial System Bhopal(M.P.)
Duration : 2 Weeks
Organization : B.H.E.L. Bhopal(M.P.)
Duration : 2 weeks
COMPUTER FORTE
Language : C, Auto Cad (Indo German Tool Room Indore)
Operating System : Windows 98/2000/XP /vista
Application : MS Office
EXPERIENCE
Currently work as a lecturer in Bansal Group of college indore (m.p.)