Indian Oil Corporation Limited Vacancies 2011 www.iocl.com : Production Engineering Assistant, Mechanical Fitter / Rigger

[muthukalee]

Indian Oil Corporation Ltd
(Refineries Division)
PANIPAT REFINERY

• On-line registration of application commences from 23.06.2011 and closes on 07.07.2011.
• The link to the on-line registration of the application has been hosted in our website www.iocl.com
• The written test / trade test / personal interview is likely to be held in the month of July / August’ 2011.

Requirement of Experienced Non-Executive Personnel

Indian Oil Corporation Limited, the largest commercial undertaking in India and a Fortune “Global 500” company requires result oriented experienced personnel with initiative and enterprise for its Panipat Refinery Complex including integrated Paraxylene and PTA complex and Naphtha Cracker Petrochemical Complex.

On-line Applications are invited from bright, young and energetic persons of Indian Nationality for the following posts in the pay scale of Rs.11,900-32,000:

Name of Posts : Junior Engineering Assistant – IV (Instrumentation)
Vacancies : 09

Name of Posts : Junior Engineering Assistant – IV (Power & Utilities -O&M)
Vacancies : 05

Name of Posts : Junior Engineering Assistant -IV (Mechanical- Fitter cum Rigger)
Vacancies : 12

Name of Posts : Junior Engineering Assistant -IV (Mechanical- Machinist)
Vacancies : 02

Name of Posts : Junior Engineering Assistant -IV (Production)
Vacancies : 41

Name of Posts : Jr. Quality Control Analyst
Vacancies : 01

Qualification and Experience : The prescribed qualification (full time) from recognized Indian University / Directorate as a regular student and the required post qualification experience for each post is as stipulated above.

Age limit : Minimum 18 years and Maximum 26 years as on 30.06.2011. Relaxation in age by five years for SC / ST candidates, three years for OBC candidates & ten years for Persons with Disability. Age relaxation for Ex-Servicemen (EXSM) as per Govt. directives.

Requirement before filling on-line application form :
1. The candidate must have an active email ID which must be valid for at least for six months as all future communication with candidates will take place only thru email.
2. The candidate should have the relevant documents / certificates pertaining to age / qualification, caste, experience, demand draft (if required) etc. ready before applying on-line.

General Instructions :
1. Candidates are advised to carefully read the full advertisement for details of educational qualification and other eligibility criteria before submission of on-line application.
2. The candidates will have the option to appear for test/ interview either in Hindi or English.
3. For claiming the benefit of OBC category, the candidate should submit a proper caste certificate as per the proforma prescribed by Govt. of India, which would, among others, specifically mention that the candidate does not belong to the persons / sections (creamy layer) as mentioned in column 3 of the schedule to the Department of Personnel and Training in the Government of India OM No. 36012 / 22 / 93-Estt. (SCT) dated 08-09-1993. Candidates belonging to OBC category but falling in creamy layer and thus not entitled to OBC reservations should indicate their category as “GENERAL” provided they meet the age criteria specified for General category candidates.
4. Candidates presently employed in Govt. Departments / PSUs / Autonomous Bodies will be required to submit NOC at the time of written test / trade test and personal interview, release order from the employer at the time of joining.
5. Application other than on-line, shall not be accepted.
6. General and OBC candidates are required to attach a crossed Demand Draft of Rs. 100/- (Rs. One hundred only) with the printout of on-line application as application fee (non-refundable) in favour of INDIAN OIL CORPORATION LTD., payable at SBI Baholi, Panipat. (Brach Code-8706). No other mode of payment is acceptable. The demand draft along with a copy of the on-line application print out is to be brought at the time of written test / trade test / interview failing which the candidature shall be rejected. Candidate must write name, address, post code at the reverse of the demand draft.
7. A candidate can apply for one discipline only. Candidates applying for more than one discipline will not be considered.
8. For claiming the benefit of Persons with Disability, the candidate should enclose medical certificate issued by a medical board attached to special Employment Exchange / Vocational Rehabilitation Centre for PWD or Head of Concerned Department of a Govt. Civil Hospital satisfying the prescribed disability criteria.
9. Canvassing in any form is liable to render the candidate ineligible for any of the above posts.

How to Apply :
1. Candidates meeting the above prescribed eligibility criteria may visit our website www.iocl.com and apply on-line from 23.06.2011 to 07.07.2011. Incomplete on-line applications or on-line applications received after the due date will be rejected.
2. After successfully applying / registering on-line applications, the candidate must take a print out of the filled in on-line application form, affix a recent passport size photograph, sign at the specified place and produce the same at the time of written test / trade test / interview. Copies of certificates pertaining to age, qualification, caste, experience, demand draft (where applicable) etc. must be attached along with the print out of the on-line application form. Original certificates are also required to be brought at the time of written test / trade test / interview for verification. The exact date, place and time of the written test / trade test / interview will be intimated by email to the shortlisted candidates.
3. The written test / trade test / personal interview is likely to be held in the month of July / August’ 2011. The exact date, place and time will be communicated by email only.
4. For any clarification(s), you can contact over Phone No. 0180-2522043 or send mail to sahoomamta@iocl.co.in.

More Details : http://www.iocl.com/uploads/Requirem..._june_2011.pdf

[Guest-IJT]

Name : satish.k.b
Email : satishbatali AT gmail.com
Designation / Skillset : mechanical fitter
curicullum vitage

Resume :
CURRICULAM VITAE
SATISH.K.B

OBJECTIVE
To pursue a career in an organization, which provides highly motivated and challenging environment, where I get an opportunity to grow both professionally and on the personal front.
STRENGHS
- Positive attitude
- Good team player and can lead a team
- Easily adoptable
EDUCATIONAL QUALIFICATION
QUALIFICATION INSTITUTION YEAR OF PASSING PERCENTAGE
SSLC KANNADA CONVENT HIGH SCHOOL
2002
40 %
ITI(FITTER) SRI BASAWESHAR ITI SURPUR
2007
73.85 %
NAC BHARATH ELECTRONICS LTD BANGALORE
2009
72.12
WORK EXPERIENCE
- Working as Fitter at Alpha Design Technologies, Bangalore from 3rd Dec 2009 to till date.
- Apprenticeship training in BEL, Bangalore from Oct 2008 to Oct 2009.
- Basic industrial training in BEL, Bangalore from Feb 2008 till Aug 2008.
TECHNICAL SKILLS
- Handling precision measuring instruments, drilling, tapping, riveting, and hydraulic press machine operating, & mechanical Assay.
- Assembly of Helicolis, Fitting, Debugging etc.
- Assembly/ Sub – assembly of Mechanical/Components.
- Verification of functional aspects of Mechanical assemblies/Sub assemblies.
- All types of mechanical R&D works.
..
SOFT SKILLS
- Computer basic
- Basic Electronics in (TVs. Taps, Radio etc)

DECLARATION
I here by declare that the above information is true to the best of my knowledge and belief.
Place :
Date : (SATISH.K.B)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4273460
Date & Time : 19th Jun 2011 5:03 PM (UTC)
IP Address : 27.61.200.178
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MDDC)
Predicted Country []: --

[Guest]

CURRICULUM VITAE
H. R. SARADVA
E-mail : hardik.saradva AT yahoo.com
________________________________________

To,
IOCL
Sub : - An application for the post of “ASSISTANT OPERATOR”
Respected sir,
I would like to submit my candidature for the post of “DIPLOMA TRAINEE ENGINEER “
I am a fresh graduate Diploma chemical engineer passe out from Government polytechnic college. June-2011 with distinction rank (70.6 %)
Professional Highlights :
- Diploma in Chemical engineering from Government polytechnic college. Rajkot
- SSC exam (Distinction rank – 79.7 %) Gujarat Education Board.
- Passed HSCE exam. Gujarat Secondary Education Board.
I am sure you will find my resume suitable for the desired post. Shall you please call me for an interview, I shall be glad to give you any further information you may require.
Thanking You,

Career Objective
Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself and organization fully and realize my potential.
Academic Qualification
Exam/Degree Passing year Collage Board/University class
S S C March-2006 Navchetan
Navsari GSHSEB Dist.
H S C March-2008 Sir CNZ
Navsari GSHSEB pass
Diploma chemical Passing year S.P.I C.P.I. Board
1st Sem Jan-2009 6.50 6.50 GTU
2nd sem June-2009 5.82 6.17 GTU
3rd sem Jan-2010 5.50 5.75 GTU
4th sem June-2010 5.00 5.27 GTU
5th sem Jan-2011 4.84 5.56 GTU
6th sem June-2011 7.06 5.82 GTU

[Guest]

From

SUB :-An application for Employment (job) in your organization.
Respected Sir/Madam,
I come to know through a reliable sourced that your esteemed organization is in need of one Diploma holder. I therefore intend to inform you that I am holding Diploma from Central Institute of Plastic Engineering Technology (Ministry of Chemical & Fertilizers, Govt. of INDIA) an ISO 9001 certified institute. I have also an ITI (FITTER) background with working knowledge of NC technology.
I also was worked in Mechanical workshop on Cincinnati Milacron Company at Ahmadabad Gujarat.
I also was worked in Mechanical workshop Engineering service group, ONGC Tripura Asset Agartala, as an apprentice of Fitter Technician.
I also was worked in D.S.LTD (Rubber Division) at Tripura State on INDIA, as well as a Technical Assistant (Supervisor).
I also was completed as a Computer programming course from Institute of Neptune Technology at Gujarat, INDIA.
Presently I am working in N.I.T Agartala as well as a post of Mechanical Instructor, on Mechanical Engineering Department.
If you give me an opportunity sever your esteemed organization, I will try at my level best to prove my dignity in this post and improve your concern as well as myself.

CURRICLLUM – VITA
Name of the candidate :- BISWAJIT DEBNATH

Education Qualification :-
Examination Board Year of passing Marks obtain Division Percentage (%)
Madhyamik TBSE 1996-97 381 iii 43.33
Technical Qualification :-
Course Board Year of passing Marks obtain Rank Percentage (%)
I.T.I(Fitter) NCVT 1997-99 524 1st 74.83%
Diploma CIPET 2000-2002 All over “B” 1st 76%

WORKING EXPERIENCE :-
(1) Period :- August 2000 to July2001
Post : - Trainee Apprentice
Place : - M/S CINCINNITY MILACRON COMPANY LTD. AHMEDABAD, GUJARAT
I was involved in flowing mentioning jobs :-
- As wall as an operator of Lathe Machine, Milling Machine for manufacturing the Guide bush & Guide pillar and Mould assembly etc.
(2) Period :- 15-10-2004 to 01-10-2005
Post : - Apprenticeship
Place : - M/S O.N.G.C.LTD. TRIPURA ASSETS, AGARTALA. MECHANICAL ENGINEERING WORKSHOP.
I was involved in flowing mentioning jobs :-
- Complete overhauling of three BPCL make MUD PUMPS used in Oil & Gas drilling.
- Complete overhauling of three ARMCO make MUD PUMPS used in Oil & Gas drilling.
- Complete overhauling of three PBL make Gear box used in Oil & Gas drilling.
- Complete overhauling of three BHEL make Swivel used in Oil & Gas drilling.
(3) Period : - 03-10-2005 to 29-8-2009
Post : - Technical Assistant (Supervisor)
Place : - M/S DHARAM PAL SATYA PAL LTD. T.I.D.C. AGARTALA TRIURA.
I involved in flowing mentioning jobs :-
- Processing, Operating, Controlling, Maintenances, etc. Machines which is related with production.
(4)Period[]:-19-08-2009 to till date

[adnanhabeeb9302@gmail.com]

RESUME
Kishori Bhawan Anoop
E-mail : adnanhabeeb9302 AT gmail.com
To prove my excellence in the mechanical production moreover to motivate and enhance my knowledge while working with the professionals of different caliber
- 2008-2011 Diploma In Mechanical Production Engineering from Aligarh Muslim University with an aggregate of 70.21%
- 2008 Class X from Aligarh Muslim University with an aggregate of 60.8%
- Done training of entrepreneurship management development from Nodal center for university polytechnic, A.M.U, Aligarh
- STUDY AND ANALYSIS OF CNC MACHINE THROUGH MANUFACTURING OF BARREL , SPINDLE, BUSH AND DEAD CENTER OF A TAIL STOCK

- Teaching Mathematics
- Surfing Social Networking Websites.
- Playing and Watching football matches.
- Drawing and Painting
- Honesty
- Regularity
- Punctuality
- Hard Working
- Team work

[Guest]

I am interested to join as production engineering assistant in indian oil corporation .
I am serving in indian army in the corps of EME since 1977 to 2007 . now I am retaired from service , waiting for job ( diploma in automobile engineering ) from eme school baroda (gujarat)

[Guest]

CURRICULUM-VITAE
DHAVAL KUMAR NARSINHBHAI SATHWARA.

dhaval_mbapharma AT yahoo.com

Career Objective :
- To acquire a meaningful & challenging position in a leading pharmaceutical / healthcare organization and looking forward to extend the horizon of my knowledge and practical skill by venturing into unexplored fields of management.
- I promise to work with sincerity and dexterity and bring out my best in your organization that I wish to do by gaining knowledge and experience by being a part of your work.
- Co-operative nature, Positive attitude, Confident.
Interest :
- Marketing management,
- Project management, Product Management,
- Business development.
- Research.
Experience :
- I am working as Marketing Executive at LUPIN LTD since june-2011.[Lupin Diabetes Care-Ahmedabad headquarter]
Educational Qualification :
COURSE UNIVERSITY PASSING YEAR PERCENTAGE
MBA
(Pharmaceuticals) Centre for Management Studies,Ganpat University, Ahmedabad. Pursuing Completed on 28th April,2011.
B. Pharm. L. J. Institute of Pharmacy, Gujarat University, Ahmedabad 2009 61%
H.S.C GSHSEB. 2005 75%
S.S.C GSHSEB. 2003 80%
Summer Internship :
- Topic : Pre-Marketing Surveillance of Drug –GLUCOTAB. (at Maan Pharmaceutical Ltd., Mehsana.)
- Under the guidance of : Mr. Dhiren Vyas, General Marketing manager.
- Responsibility :
o To create market survey about energetic drugs.
o To meet doctors, chemist, and related patient.
o Analysing the data, suggestions and findings.
o Reporting.
Industrial visits/training :
- ZYFINE PHARMACEUTICAL. (Fine chemical division of CADILA HEALTHCARE LTD.)
- I completed training at EXCEL LIFECARE. (451, GIDC, Mahesana).
- I attend the national level conference on pharmaceutical industry management (PHARMA PULSE-2010) at D.Y.Patil University, Navi-Mumbai.
Extracurricular Achievements :
- Took part in sports [Cricket(University level), Volley ball, Treasure hunt(Nation level)]
- 1st prize in volleyball held in the L. j. Pharmacy College during the year 2009.
- 1st Runner-up in Treasure hunt event held at GANPAT University during 2009.
- Also took part in Dance, Fashion-show, and Mimetic like cultural event competition.
- 2nd Runner-up in stage performance at Protsahan (Ganpat University), inter-college cultural and management event.
- 2nd Runner-up in Fashion-show stage performance at JOSH-2010 (held by National level Event Management College, Ahmadabad.)
- Active member of cultural committee of college, Event management.

[Guest]

in privet sector qc post