SSC www.sscnwr.org Jobs 2011 Staff Selection Commission : Technical Assistant

[muthukalee]

STAFF SELECTION COMMISSION
(NORTH WESTERN REGION)

Name Of The Post : Junior Technical Assistant in Forest Survey of India, Shimla
No Of Vacancies :03
Qualification : Certificate in Forest Ranger’s Course from any recognized Institute/ Graduate in Science/ Computer Science.
Pay Scale : Rs.9300-34800/- + GP Rs.4200/-
Age Limit : Not Exceeding 28 years

Name Of The Post : Senior Technical Assistant (Chemical) in Central Ground Water Board
No OF Vacancies :01
Qualification : Master’s Degree in Chemistry or Agriculture Chemistry or Soil Science from a recognized University or Institute or equivalent.
Pay Scale : Rs.9300-34800/- + GP Rs.4600/-
Age Limit : Not Exceeding 30 years

Application Fee : Rs.50/- (Rupees Fifty Only). No Fee for SCs, STs, Female candidates, Physically Handicapped & Ex-Servicemen.

How To Apply : The applications may be typed out in double space or Computer printed or Written in hand neatly, but format should be the same as published.

ADDRESS :
Deputy Regional Director (NWR),
Staff Selection Commission,
Block No.3,
Kendriya Sadan, Sector-9,
Chandigarh – 160017.
http://www.sscnwr.org/

Last Date : 04.07.2011.

For More Details : Employment News 4th - 10th June 2011

About us :
The main responsibility of the Staff Selection Commission is to make recruitment to Group C (non-technical) & Group B (non-gazette- both technical & non-technical) posts in departments of Government of India, its attached & subordinate offices except those for which recruitment is made by the Railway Recruitment Boards & Industrial Establishments.The Staff Selection Commission is headed by a Chairman with two Members & a Secretary-cum-Controller of Examinations. The Head Quarter is located at Block 12, CGO Complex Lodhi Road New Delhi.

General Instructions :
1) This is a job / career / vacancy / recruitment posting from SSC at Name Of The Post Junior Technical Assistant in Forest Survey of India, Shimla for post of Junior Technical Assistant in Forest Survey of India, Shimla.
2) For more details refer company website of Junior Technical Assistant in Forest Survey of India, Shimla.
3) You can send your resume / CV to the careers e-mail id of the company (STAFF SELECTION COMMISSION).
4) Source of this info is the company website / internet on the date of publishing.

[Guest-IJT]

Name : V.SATISH KUMAR
Email : satishkumar3113 AT gmail.com
Designation / Skillset : project fellow
Three years of experience
in research field

Resume :
RESUME
V.SATHISH KUMAR

CARRER OBJECTIVES
To work in an area where literal value is created and in a modern, militant organization that utilizes and enhances my skills and I can excel in new technologies.

EXPERIENCE :
Three years of experience
JOB PROFILE :
- Working as a Research Fellow in groundwater department at National Geophysical.Research.Institute
- Gained field knowledge and operation of latest geophysical tools like Multi-Electrode Resistivity Imaging and Ground Penetrating Radar and also trained in Geophysical Investigations and Topographical Survey by Differential Global Positioning System (DGPS).
- In Bharat Electronics Limited, Worked as a Graduate Trainee in Q.A DEPARTMENT, used to handle the testing of the electronics good like regulators, power supplies and filters by using the equipments like spectrum analyzer, network analyzer.
- In L.N.T ELECTRONICS, I worked as a testing engineer and used to test the high voltage power supplies in the premises of the customers.
EDUCATIONAL QUALIFICATIONS :
- M.TECH (ENVIRONMENTAL MANAGEMENT), Centre for Environment, Institute of Science and Technology, Jawaharlal Nehru Technological University, Hyderabad, secured 74.00%.
- B.TECH (ELECTRICAL AND ELECTRONICS), Mahatma Gandhi Institute of Technology, affiliated to JNTU HYDERABAD, secured 53% and completed in 2005..
- INTERMEDIATE (M.P.C), M.N.R Junior College secured 70.1% and completed in 2001.
- INDIAN CERTIFICATE OF SECONDARY EDUCATION, ST.Martin’s High School. Awarded pass certificate and completed in 1999.
PROJECT PROFILES
M.Tech - Project
Title : “IDENTIFICATION OF GROUND WATER QUALITY ZONES IN HARD ROCK TERRAIN AT CHINTAPALLY MANDAL USING RS AND GIS, NALGONDA DISTRICT ANDHRA PRADESH INDIA.
Organization : National Geo-Physical Research Institute (NGRI), Govt. of India, Uppal
Road, Hyderabad.
Duration : Sept-15, 2008 – Sept-14, 2009.
In our project we have found out that the areas in this mandal are having the good quality of water that people can use it for drinking, using this GIS software I have demarked the quality zones and made an output map which represents the areas where the quality is good.
B.Tech Project
Title : “DESIGN OF THREE PHASE 100KVA.11KV/433V, DISTRIBUTION TRANSFORMER”.
Organization : Vijay electricals, Hyderabad.
Role Played : Team Leader
Duration : six months.
In our project we have designed a transformer according to the customer’s specification, with less losses and more efficiency.
SOFTWARE SKILLS :
Programming Language : C, C++.
Packages & Geosoftwares : Auto CAD, GIS 9.3, Visual MOD Flow 4.0, Radan 5.0. Surfer, RESIST, and RES2DINV
Operating Systems : Windows XP, 98, Windows Server 2000..
Networking and Hardware : M.C.S.E.
TECHNICAL SUBJECTS : Air Pollution, Water Pollution and Treatment Methods and Solid Waste Management, Geographical Information Systems
CHARITABLE CONTRIBUTIONS
- Member with “CAFET-INNOVA Technical Society” (CITS) Since March 30th 2007 till date.
- CITS – A non-profit organization encouraging student community towards Scientific Research & Development; registered under the AP Societies Registration, 2001.
COCURRICULAR ACTIVITIES
Participated in workshop at :
- Institute of Science and Technology, JNT University on “Environmental Issues in Chemical & Pharmaceutical Industries” held during 1st to 2nd September 2008.
- Institute of Science and Technology, JNT University on “Green Chemistry” held during 14th to 15th Feb 2009.
EXTRA CURRICULARACTIVITIES
- I took an active part in Electrical Fest (surge’05) held in our college.
- Represented the college in inter-group Volleyball tournament in 2003.
PROFESSIONAL OBJECTIVES
- To work in the organization with at most dedication and commitment.
- To assist all senior official and colleagues.
STRENGTHS
Grasping new technologies, Ability to work in a team and Adaptability, creativity and Confidence.
Declaration
I, V.Sathish Kumar. Here by declare that the details furnished are true to my cognition and endeavor.
DATE :
PLACE:
(V.SATHISH KUMAR)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4220687
Date & Time : 7th Jun 2011 5:24 AM (UTC)
IP Address : 203.153.42.67
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MDDR; msn OptimizedIE8;ENIN)
Predicted Country : India

[Guest]

Mr. Parshuram Thakur
SHELL PEARL GTL PROJECT, RLIC, QATAR
LINDE AG, ENGINEERING DIVISION ASU
Mobile no.+974-55108357 & 55733587
Office Email :- Uparshuram.thakur AT linde-LE.com
Personal Email :- parshuramthakur AT yahoo.com
POST APPLIED FOR : Technical Engr/Quantity Surveyor / Cost control / Landscape Engineer
Available upon Sponsorship Transferable

Joining your company to acquire challenging positions according to scope of work in Quantity Survey / Landscape Engineering Technology to excel my professional growth which can be beneficial to company and myself. Have almost 12 years experience in this field with safe, timely and cost effective manners at homeland and Gulf based International companies especially in Oil, Gas & Petrochemical Field. Yours' consideration required to the CV where I have reflected different project completed successfully under my supervision. Flexible, wide range capability & Strong with my Heart to cover the project requirement on site as well as office Cost control work as a Landscape Engineer, Quantity Surveyor /Cost control / Subcontract Engineer.
ACADMIC QUALIFICATION / EDUCATION
- B.Sc. Survey Engineering -1st Division -Tribhuwan University, Nepal Government.
- Mechanical Engineering -Basic Professional Orientation Course, Nepal Government.
- 10+2 (Intermediate of Science) -1st Division - Bihar Intermediate Education Council, Patna, India.
- 10th (Higher Secondary School) -2nd Division from HMG (His Majesty’s Government) Board, Nepal.
- Diploma in Computer-MS word, Excel, Auto-CAD (Drafting/ Design), Kathmandu, Nepal.
- Computer Skills : Sound knowledge of MS-DOS, Windows 9x/XP/Vista, Microsoft Word/Excel/FrontPage/ PowerPoint; Software / Hardware installation, trouble shooting of computer software / hardware and related accessories etc.
- Computer Language Known : C; Drawing Tool- AutoCAD.

MY CURRENT EMPLOYER EPC CONTRACTOR :
LINDE AG, ENGINEERING DIVISION, QATAR BRANCH ( Dr. Carl Von Strauss 6/14, Pullach, Munich, Germany)
AIR SEPERATION 8 UNITS
QATAR SHELL PEARL GTL PROJECT, RLIC, Qatar
CLIENT : QATAR PETROLIUM
CURRENT POSITION : SUBCONTRACT ASSISTANT (QUANTITY SURVEYOR)
(Basic Salary : USD5500.00 - Accommodation Allowance USD1100.00 & Transportation Provided)
(Annual Leave 30 Days and Round trip plane fair for each completion of six months)
Linde AG, Linde Engineering division has been awarded Engineering, Procurement, Construction and Commissioning of 8 Air Separation units in Qatar Shell GTL Project in Ras Laffan Industrial City in the state of Qatar. Approx value of the contract is 1 billion USD.
Here, I am working as an Assistant of my Subcontract & Commercial Manger to administer all subcontracts placed by Linde Engineering for this project including Civil, Mechanical, Electrical & Instrumentation, Insulation and setting up infrastructures and temporary site facilities on site.
Subcontractors under My Duties & Responsibilities : (16/11/2009 at present)
1. CIVIL , Structural Steel & Mechanical Supply / Installation works by : GAMA Qatar (Turkey, Ankara based Company)
2. Electrical & Instrumentation supply / Installation works by : QATAR KENTZ, LLC
3. Insulation and Cladding works by : KAEFEER LLC.
Quantity survey of materials with respect to delivery notes (back ups) supplied by suppliers / Vendors.
Preparation and issuance of Site Notification for additional and Modification works at site.
Arrangement and participation in Commercial Clarification meetings.
Coordination with construction teams concerning Site Instructions (Civil, Mechanical, E&I & Insulation) for Modification and Extra-works as per site requirement.
Controlling all the Documents related to Contracting and Commercial matters.
Preparation and updates of comparison statements.
Assisting Contract, Commercial and Site Manager in official & all the site issues.
Contractual & Commercial correspondence with Sub-Contractors
Verification and checking Progress with respect to BOQ for Civil, Mechanical and E&I sections.
Preparation of Recommendation of cost and Quantity BOQ for approval of Management.
Preparation of Subcontract documents ready for signature by Management.
Control and Recommendation of payment release for Contractor invoices
Preparation & Issuance of Letter as per site requirement and correspondences.
Checking Certificates for payment claimed by sub-contractors.
Arrangement and participation in Technical Clarification meetings.
Checking Variation Order Request claimed Amount, materials including all back ups and manpower from Subcontractors.
Approval of invoices (Progress Payment Certificates etc.) Cost Reporting - Construction
Preparation of Variation Order and Estimation of Amount payable & Back chargeable to Subcontractors / Client.




EXPERIENCE : Mechanical / Structural Steel Fabrication/ Installation, Quantity Survey & Subcontracts.
EMPLOYER EPC CONTRACTOR : IBERDROLA ENGG & CONSTRUCTION MIDDLE EAST S.A.U.(Madrid, Spain)
Mesaieed Power & Water Cycle Plant (2000MW), Qatar
CLIENT : QATAR PETROLIUM & KAHARAMA
POSITION : STEEL STRUCTURE INCHARGE
(Basic Salary : US$4700.00 - Accommodation Allowance US$1250.00 & Transportation Provided)
(Annual Leave 30 Days and Round trip plane fair for each completion of six months)
The Gas-rich Emirate of Qatar, holder the world’s third-largest gas reserves, inaugurated another massive 2,000 MW gas power plant in the industrial city of Mesaieed, south of the capital Doha this May. The combined-cycle plant comprises three configuration groups (2 x 2 x 1). It also includes two black-start turbines, with a total of six 9FA gas turbines, six heat-recovery steam generator boilers, three D11-type condensing steam turbines, and two 6B dual gas-diesel turbines.
The Qatar plant was built for Mesaieed Power, which holds the development and operating rights, by Spain’s Iberdrola at a cost of more than $1.66 billion. It is expected to supply around 40% of the power generated by the country, which has a population of 1.2 million. According to Iberdrola, the new plant will increase installed capacity in the peninsula by 55% since the end of 2007, the year in which the project was awarded.
Subcontractors under My Duties & Responsibilities : (16/02/2008 to 16/11/2009)
1. Steel Supplier : HIDADA STEEL INDUSTRIES, Jeddah, Saudi Arabia, KSA
2. Structural Steel Installation : AmEm Joint Venture Company, Qatar
3. Structural Steel, Piping & Mechanical Installation : Lahoud Engineering & Construction,
4. Structural Steel, Piping / Mech. & E&I Installation : DEBAJ Engineering & Construction, Al-Jaber Group
5. Structural Steel, Piping / Mechanical Installation : SOMI Qatar Simpati, Itali Group, Qatar
6. Structural Steel Supply & Installation : Gammatech International Ltd. Company, Qatar
7. Substation & Transformer Installation : Pryzmian Group
8. Water Treatment Plant and GRP Pipe, Spools, Elbow Fabrication & Installation : Aquatech Company
- Closing all the punch items or Loose Open Points and preparation of Handover to Client.
- Organizing meeting with Vendor/Suppliers & Subcontractors for Contractual scopes and prices to finalize for Cost Control and Site Management.
- Review of pre-fabrication and proposal documents submitted by Venders/Suppliers of steel structures / piping and galvanized structures for Substation & Transformers.
- Preparation, Review and approval of certificate for payment submitted by subcontractors.
- Handling all the packing notes and delivery notes with materials received from suppliers and handover to warehouse for proper arrangement.
- Checking and approval of Extra work Man-hours and Equipment Hrs daily Report for Documentation & Payment.
- Handling all the inspection reports for final Dossiers and Hand Over Documentation.
- Pre-Inspection for suppliers and contractors Workshop for approval to proceed with fabrication jobs.
- Inspection for site works completed & requested by Contractors-Turbine Building, Pipe racks, Boilers, Electro chlorination Plant, Workshop and Water Treatment Plant.
- Joint-Installation, Alignment and Inspection of Overhead Crane, Monorails Beam, Rails and Inspection of Load test.
- Work order issue and handling correspondences from the related suppliers and subcontractors.
- Handling Database Control sheet of materials delivered by suppliers to check with invoices and release payments.
- Daily and weekly Coordination meeting organizing with sub-contractors for site works as per planning.
- Distribution of jobs & Responsibilities for supervisors related to site construction works.
- Coordination meeting with our management for submission of daily site progress and follow up new schedule.
- Request & coordination with HIDADA supplier (for steel structures and Tanks) as per Engineering Design & Changes.
- Prepares Periodic Progress Reports & daily/monthly erection status.
- Notifies Client’s representative by giving RFI after completion of each structure.
- Joint Supervision with main client for workshop and inspection for Fabrication, Welding and Painting applied on.
- Maintains logs of all project communications and/or documents i.e., outgoing letters, incoming letters, Ready For Erection (RFE), Packing List (PL), Daily report to client, erection and fabrication drawings, Field Revision Request (FRR), contract variations (CV).
- Coordination with Engineering for Design changes and submission of proposal prepared as per site condition.
- Joint Survey / Inspection of Anchor Bolts on Foundation completed by Civil Contractor –KETANEH.
- Attending progress meeting with Client or Client’s representative.
- Joint Supervision with main client for Bolt-Torquing on structural steel items as per project specification.
- Coordination with Structural steel, Mechanical and Electrical Installation Team for site working access / interface.
- Confirmation with Client’s representative regarding design related erection problems.
- Verification of Steel and Civil Drawing As built reports Ready for Erection on Site.
- Supervision of pipeline installation for Water, Steam and Gases as replacement & coverage as site requirement.
- Supervision / Inspection of site modification works implemented as per Revised Engineering drawings.
- Distribution of documents received from different sections implemented as per adjustment / revision on site.
- Cost control and estimation for Progress achieved & applied by Subcontractors.
- Segregation and checking all the Erection & Fabrication Drawings for contractors.
- Co-ordination for access arrangement with civil team for Site works.
- Engineering Documents controller for Steel structures and piping section.
- Coordination with Pre-commissioning & Commissioning Team as per requirement on site.
- Raises Non Conformance Report (NCR) to the client in case of any discrepancy in fabrication/design etc.
- Writing letter to Client representative on project related matters and issues.
EXPERIENCE : Mechanical / Structural Steel Fabrication/ Installation, Quantity Survey & Subcontracts.
LAST EMPLOYER : SIEMENS AG, POWER GENERATION, Qatar Branch (Germany Based).
Ras Laffan B Combined Cycle Water & Power Plant
Client : QATAR POWER & WATER COMPANY.
POSITION : SITE ENGINEER (STRUCTURAL STEEL / PAINTING)
(Basic Salary : US$4550.00 - Accommodation Allowance US$1000.00 & Transportation Provided)
(Annual Leave 30 Days and Round trip plane fair for each completion of six months)
The 1,025MW Ras Laffan B Combined-cycle Power Plant in Qatar has a seawater desalination plant that will produce around 27,500 cubic meters of drinking water per day. The plant has three Siemens SGT5-4000F gas turbines, two 220MW steam turbines and four 15MIGD (million imperial gallons per day) multi-stage flash distillers. The desalination plant is being supplied by Doosan Heavy Industries & Construction, with the drinking water being pumped to Doha.
Subcontractor under My Duties & Responsibilities : (15/06/2005 to 15/02/2008)
1. Structural Steel fabrication Supply and Installation works : ZAMILSTEEL INDUSTRIES, Dammam, KSA
2. Subcontractor Structural Steel Installation works; MODERN SERVICES LIMITED, LLC
3. Subcontractor Piping / Mechanical Turbines Installation : SOMI Simpati, Itali Group, Qatar
4. Subcontractor Civil construction works; KETANEH & SIMPLEX Qatar
- Handling Pre-fabrication and proposal documents submitted by Venders/Suppliers of steel structures / piping and galvanized structures for Substation & Transformers.
- Handling all the packing notes and delivery notes with materials received from suppliers and handover to warehouse for proper arrangement.
- Checking and approval of Extra work Man-hours and Equipment Hrs daily Report for Documentation & Payment.
- Daily and weekly Coordination meeting organizing with sub-contractors for site works as per planning.
- Distribution of jobs & Responsibilities for supervisors related to site construction works.
- Coordination meeting with our management for submission of daily site progress and follow up new schedule.
- Handling all the inspection reports for final Dossiers and Hand Over Documentation along with Turn Over Package.
- Pre-Inspection for suppliers and contractors Workshop for approval to proceed with fabrication jobs.
- Work order issue and handling correspondences from the related suppliers and subcontractors.
- Handling Database Control sheet of materials delivered by suppliers to check with invoices and release for payments.
- Coordination with ZAMIL STEEL supplier (for steel structures and Tanks) as per Engineering Design & Changes.
- Joint Supervision with main client for Bolt-Torque on Structural steel and Flanges items as per project specification.
- Preparation and review of Quality Control Procedures, Inspection and test plans.
- Knowledge of international codes / standards / specifications.
- Joint Supervision with main client for workshop and inspection for Fabrication, Welding and Painting applied on.
- Maintaining Logs of all project communications and/or documents i.e., outgoing letters, incoming letters, Ready For Erection (RFE), Packing List (PL), Daily report to client, erection and fabrication drawings, Field Revision Request (FRR), Contract Variations (CV).
- Implementation of Engineering for Design changes and submission of proposal prepared as per site condition.
- Joint-Installation, Alignment and Inspection of Overhead Crane, Monorails Beam, Rails and Inspection of Load test.
- Coordination with Structural steel, Mechanical and Electrical Installation Team for site working access / interface.
- Verification of Steel and Civil Drawing As built reports Ready for Erection on Site.
- Joint Survey / Inspection of Anchor Bolts on Foundation completed by Civil Contractor –LARSON & TUBRO LTD.
- Inspection for site works completed & requested by Contractors.
- Supervision of pipeline installation for Water, Steam and Gases as replacement & coverage as site requirement.
- Supervision / Inspection of site modification works implemented as per Revised Engineering drawings.
- Cost control and estimation for Progress achieved & claimed by Subcontractors against site works and supply.
- Segregation and checking all the Erection & Fabrication Drawings for contractors.
- Co-ordination for access arrangement with civil team for Site works.
- Controlling documents steel structures and piping section received from different sections for adjustment / revision on site.
- Coordination with pre-commissioning Team as per requirement on site.
- Closing all the punch items or Loose open points and preparation of Handover to Client.
- Organizing meeting with Vendor/Suppliers & Subcontractors for Contractual scopes and prices to finalize for Cost Control and Site Management.
- Preparation, Review and approval of certificate for payment submitted by subcontractors.
- Qualification of Procedures and welders as per client’s specifications.
- Prepares Periodic Progress Reports & daily/monthly erection status.
- Notifies Client’s representative by giving RFI after completion of each structure.
- Raises Non Conformance Report (NCR) to the client in case of any discrepancy in fabrication/design etc.
- Writing letters to Client representative on project related matters and issues.
- Attending progress meeting with Client or Client’s representative.
- Confirming with Client’s representative regarding design related erection problems.

Additional Skills :
a. Worked for the project DOLPHIN ONSHORE FACILITIES PROJECT, Ras Laffan Industrial City, Qatar in the field of Quantity surveying & invoice preparation using the software Microsoft Office Excel-advance level.
b. Supervision of Scaffolding Erection in British Standard and Quantity survey reports Preparation for Billing.
c. Worked in GS-DAEWOO CONSORTIUM for the project LAFFAN REFINERY, Ras Laffan Industrial City, Qatar in the field of Quantity surveying & invoice preparation using the software Microsoft Office Excel-advance level.
d. Worked for the project OLEPHIN ONSHORE FACILITIES PROJECT, Ras Laffan Industrial City, Qatar in the field of quantity surveying & invoice preparation using the software Microsoft Office Excel-advance level.
- Computer Skills : Sound knowledge of MS-DOS, Windows 9x/XP/Vista, Microsoft Word/Excel/FrontPage/ PowerPoint; Software / Hardware installation, trouble shooting of computer software / hardware and related accessories etc.
- Computer Language Known : C; Drawing Tool- AutoCAD.
- Valid Qatari, Indian & Nepalese Driving License for Four wheel LMV.

EXPERIENCE ACHIEVED IN VARIOUS PROJECTS IN MY NATIVE PLACE, NEPAL
- TRIBHUVAN International Airport, Ktm, Nepal -Field / Landscape Supervisor.
- MELAMCHI Water Supply Project, Ktm, Nepal -Quantity Surveyor / Site Engineer.
- KULEKHANI Power & Water Project, Nepal -Construction Supervisor/ Land Surveyor
- ABAAS Construction, Delhi, India -Quantity Surveyor / Cost control Assistant.
- NEPAL Electricity Authority, Kathmandu, Nepal -Erection Supervisor/ Land Surveyor.
- MIDDLE MARSYANGDI Hydro Power Project, Nepal -Land Surveyor
- HULAS Steel Industries, Simara, Nepal -Structural Steel Engineer
- NJJR Steam Railway, Janakpur Dham, Nepal -Field Supervisor / Land Surveyor
- KALIGANDAKI Water & Power Project, Nepal -Quantity Mech. Surveyor

VOCATIONAL TRAINING & INVOLVEMENT IN DIFFERENT SECTOR OF HIS MAHESTY'S GOVERNMENT OF NEPAL
- Under Industrial Management (Airlines, Transport and Factories)
- Electricity Authority Dept. (Survey & Maintenance)
- Water Resources & Irrigation Department.
- High way, Road & Infrastructure Department.
- Urban Survey & Development Department.
- Topographical & Geological Survey Branch.
- Geodetic & Trigonometric Survey Branch.
- Photogram metric Survey (Air Survey) Branch.
- Transmission line Survey & Tower Erection for Substation and Power Distribution.
SPECIAL TRAINING : Warehouse Industrial Mngt. /Pre-Commissioning/Operation /Usage / Maintenance / Storage of Instruments. Safety requirements applied in Oil & Gas Field. Topographical / Hydro Survey for construction site.
Seminars Presented :
- Reccee Survey for Hydro Power Station
- Geological Study & Topographical Survey for Construction
- Power Plant Pollution & its control
- Coordination of Team for Better Production
- Role of Political forces in Local Construction (Bridge, Highway and Irrigation)
- Robotics & Artificial Intelligence
- The COREX and FINEX Processes-reliable, environment friendly and economical Hot-Metal Production
Interests : Playing, reading sport stuffs, listening to music, travelling & practising yoga.
Languages Known : English, Hindi, Nepali, Maithili & Arabic (Primary) etc
Character References : Available upon request
Personal Details : -
Mr. Parshuram Thakur.
Nepalese Passport No.2266376,
Issued date : 02-07-2004 Expiry date: 01-07-2014.
Date of Birth 04-01-1977
Marital Status : Married
Wife : Mrs. Rani Sharma (Thakur). Mobile no.+9779849049756
Bhaktapur Metro-polity -16, Lokanthali, Imadol area
Father : Mr. Nathuni Thakur.
Permanent Address : VDC Banauli-Danauli-5, District Mahottari, Nepal

I hereby declare that the above-mentioned information are true and correct to the best of my knowledge and belief.
It is with great interest that I am forwarding my CV/Resume for your consideration and provide you with details of my skills and accomplishments,
My record of academic achievements and professional career history, demonstrates attributes that make me a valuable employee but I am certain that a personal interview would more fully reveal my desire and ability to contribute to your organization. Thank you for your time and consideration, and feel free to contact me if you have any questions. Parshuram

[Guest]

E-MAIL :munish.ak29 AT gmail.com
MUNISH GANGWAR
Objective
· To work with an organization which will provide good conceptual environment performance based work culture and to utilize my knowledge and skills in the best possible way.
Professional Qualification
- B.Tech Computer Science with 60.34% from Shree Ganpati Institute of Technology Ghaziabad affiliated to U.P Technical University, Lucknow.
Educational Qualification
- 12th from U.P board with 58.40% in 2006.
- 10th from U.P board with 52% in 2004.
Technical Skills
Language : HTML,CSS, C, Core
JAVA.

Operating System : Windows98, 2000, XP.
Database : Ms Excess, sql
Subject of Interest : Data Structure through ‘C’,
Database, Discrete Mathematics, Computer Organization .
Project Undertaken
Major Project on “News posting system” in .net.

[Guest]

Resume
HEMALATHA.K
Email :hemalatha.klatha AT yahoo.co.in

CAREER OBJECTIVE
To seek a challenging position in an organization, with growth opportunities, where I can always perform to the best of my abilities and constantly strive for excellence in all that I do
WORK EXPERIENCE : Worked as Data Entry Executive
For Team Life Care Company Channel Partner of
(Bajaj Allianz Life Insurance Co.Ltd)
From Dec 2008 to
June 2010

Worked as Data Entry Executive
for Vector courier company
for 6 months

EDUCATION QUALIFICATION : Diploma in Electronics &
Communication Engg with 62%, Year of
passing 2008 from
Bangalore
S.S.L.C with 62%, Year of passing 2001
from Goodwill composite school
Bangalore
COMPUTER KNOWLEDGE : Windows 95/98/2000
: Ms Office (Ms-Word, Ms-excel
Ms –PowerPoint, Ms-Access)