www.bossautomation.in BOSS Automation Solutions Pvt Ltd Coimbatore : Electrical/Electronics Engineer

[t.bala]

BOSS Automation solutions Pvt Ltd Coimbatore : Electrical/Electronics Engineer
bossautomation.in
Name of the Company :BOSS Automation solutions PVT LTD
Location of the Company : Chennai/Coimbatore
Name of the Post : Engineer - Customer Support / Projects
Job Specification :
* Perform New System installations and upgrades
* Service and maintain existing Burglar, Fire, CCTV and Access systems.
* Troubleshoot and repair advanced installations using test equipment and PCs .
* Provide customer instruction on system operation and functionality.
* Perform system testing and signal verification.
* Submit accurate and timely documentation to management.
* Comply with all local codes & manufacturer specifications.
* Implement, acknowledge and enforce company policies and procedures.
* Maintain the appropriate stock, supplies, tools, equipment.
* Conduct System Additions.
* Attend classroom and field training as required.
* Willing to travel across Tamilnadu & ready to be posted / deputed in any part of TN.

Desired Profile :
* Diploma in Electrical/Electronics Engineering with 1 -3 years experience.
* Fresher’s can apply for the post of Trainee.
* Knowledge of analog and IP camera systems.
* Knowledge of programming digital video recorders (DVRs).
* Hands on experience with hand and power tools.
* Basic knowledge of AC and DC theory.
* Previous electronic security, or electronics and construction experience.
* Candidate must be able to use MS Word, Excel, etc.
* Willingness to accept responsibility and carry out assigned tasks with limited supervision.
* Ability to follow the installation, testing, and troubleshooting procedures.
* Strong understanding of new technologies.
* Good attention to detail.
* Team Player- works to ensure team goals are met or exceeded.
* Openly communicates to the team in an enthusiastic and motivated manner.
* Positive 'can do' attitude; self-motivated and good communicator.
* Neat, professional appearance.

Apply now by sending your CV to jobs@bossautomation.in

Please include job title, location and your name in the subject line along with a soft copy of your passport size photograph.

Company Address :
BOSS Automation solutions PVT LTD
No.40,1st Floor, Reghupathy Layout,
Saibaba Colony, Coimbatore - 641011
Website : http://www.bossautomation.in/

[Guest-IJT]

Name : Renjit Gopakumar
Email : renjit07 AT yahoo.co.uk
Designation / Skillset : Electrical engineer/ project engineer
Electrical engineer wiith 11 years experience in power system equipments maufacturing and projects seeking challenging oppertunities.

Resume :
Objective : Seeking a challenging position in an organization where I
can enhance my knowledge and competence in pace with the technological advances. Also to work for the development of the organization which will be mutually
beneficial.
Total experience : 11 years in production, planning, Testing & commissioning, Aftersales services of MV & HV Power system and Industrial system products products and projects.
Experience : 2 Years Experience as Project Engineer at Al Quraishi Electrical Services of Saudi Arabia for power system projects.
2 Years (from 2007 to 2009) Experience at Crompton Greaves Ltd as Senior Executive After sales service. Responsible for managing after sales Services, Erection and commissioning for power system Equipments Such as Medium voltage Vacuum Switchgears from 3.3Kv to 33Kv, High voltage SF6 Switchgears up to 220Kv,Transformers, RMU and Lightning Arresters etc for entire Kerala. Engineer in charge for aftersales services of Industrial system products such as AC motors, DC motors, Alternators etc.
6 Years (from 2001 to 2007) experience at The Aluminium Industries Ltd. (ALIND) switchgear Division, an ISO 9001-2000 Organization. In which 2.5 years as Engineer Planning.1.5 years as Head Sales and Aftersales service and 2 years as Head production planning and control.
1 Year (from 200 to 2001) experience at UNI POWER System as Engineer testing. The work involved were maintenance and testing of HT Transformers.
Work Proficiency : Production Planning –Independent charge as Engineer (Planning). The work involved planning of materials and components for the production of Minimum Oil Circuit Breakers from 6.6 KV to 66 KV, Vacuum Circuit Breakers from 11 KV to 33 KV panels and Autoreclosers.
Preparation of Annual Budget, Launching of new products, manufacture of prototype, performance evaluation, leading to commercial production
Monitoring of the production process of the organization


After sales- Directly responsible for servicing and maintenance of equipments for Southern, Western, Eastern and Northern railways, NTPCs at Korba, Farakka and Taltcher.Erection and commissioning of Power system equipments at various customers ends.
Organizing customer complaint meetings. Collecting feedback from customers about performance of equipments. Service network expansion.
Project- Responsibilities for the production and maintenance of integrated planning for multiple projects.
Reviewing Contractors planning packages at Tender stage.
To establish planning & schedule control, measurement and reporting structures.
Auditing Contractors progress.
Prepare weekly/monthly reports
Attending Meetings with contractors, Client Handling etc.
Academic Qualification : B.E. (Electrical & Electronics)
B.Sc (chemistry)
Training in Lead Auditor Course ISO 9001-2000 at IIQM.Jaipur
Computer Knowledge-C language & OS-Unix, windows 2000, MS word and Excel
Certified that the information furnished is correct

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4167153
Date & Time : 24th May 2011 7:06 AM (UTC)
IP Address : 61.17.226.120
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.10) Gecko/20100914 YFF35 Firefox/3.6.10 GTB7.1
Predicted Country ;: India

[Guest]

APPLICATION
R.POOMALAI PRAKASH
poomalai1988 AT gmail.com
Respected Sir,

I am seeking a position that leads me a challenging career in your firm. I would like to express a sincere interest in finding out more about becoming an integrate part of your organization.

I did my B.E in ELECTRICAL & ELECTRONICS ENGINEERING at Christion College of Engineering under Anna University, Chennai with an aggregate of 69% and having 2 years experience. I am confident of making of a significant contribution now and increasingly important years to come.

Enclosing my resume, which will provide additional information about my education and skill sets I may reached at the above added and should be glad to make myself available for an interview at anytime at your convenience. To discuss how my qualification would be consistence with your needs.

Objective :
To be with an organization, where I can explore my potential in an environment characterized by opportunity, flexibility, and growth and continuously acquires skills in emerging trends.
Work Experience-1 :
Organization : RICHARDSON CRUDDAS (1972) LTD, Ambattur, Chennai.
Project/work site : Bharath Heavy Electricals Ltd (BHEL), Trichy-14
Designation : Quality & Site incharge (1st june2009 to 31st may 2010)
Job Nature :
- Electrical Operation & Maintenance of EOF and Crane’s LT, HT, CT operations.
- Follow up the project, material status and billing status.
- Making cutting plans for the given projects without any wastage of materials.
- Inspecting the quality and dimensions in stage by stage as per the vendor fabrication rules and maintaining the stage by stage inspection reports for the customer verification.
- Schedules, Directs and Assign duties to Technicians and Other Labours.
- Taking complete responsibility till the submission of handing over document. Getting work done from the sub-contractors.
Work Experience-2 :
Organization : Blue Horizon(P)Ltd,.Chennai.
Designation : Application Engineer (from Dec 2010 to Till Date)
Job Nature :
- Installation and programming of PLC
- Trouble Shooting and Commissioning of PLC Automated System
- PLC based project work for colleges and Industries
Academic Profile :

- B.E in Electrical and Electronics Engineering from Christian Engg. College, Anna University, with
69% (2005-2009)
- HSC from Nirmala Hr. Sec. School, kolathur under Tamil Nadu Board in the year 2005 and passed with 60%.
- SSLC from Nirmala Hr. Sec. School, Kolathur under Tamil Nadu State in the year 2003 and passed with 86.4%.
Certification trainings :
- PGDIA(Post Graduate Diploma in Industrial Automation ) from Technocrat Automation Solution Pvt. Ltd. (PLC,SCADA,DCS,MMI,VFD,GSM,PAC)------( June-Nov 2010 )---6 months
- HDCHN (Honours Diploma in Computer Hardware and Networking) from CSC Computer Education (p) Ltd, oddanchatram (PC Assembling,Hardware,Software Troubleshouting & repairing ,OS&Software Installation,Network Connections) ------- ( feb -august 2008)---6 months
Academic Project :
"Fault Identification of Three Phase Induction Motors”
This project is used to identify and rectify the faults occurred in three phase lines to prevent the three phase induction motors automatically from the damages using PIC microcontroller. In this project we are rectifying the following faults, and they are under voltage, unbalanced voltage, single phasing R, Y, B, over current and no fault. This project can be implemented in any type of industries and unbalanced load areas to preventing the motors from above faults.
Area of Knowledge (Training Program) :
- PLC (Programmable Logic Controllers)
- AB (Allen Bradley) : Micro Logix 1
- 200 series C, RSLogix 500/SLC 500.
- Siemens : S7 300-microwin32, CPU 312C, Simatic Manager v6.3.
- ABB(Asea Brown Broveri) : 07CR41,AC1131 v4.2.
- Ge Fanuc : Series 90-30, CPU331, Versapro v2.04. Versamax, CPU IC200UDR010.
- Omron : SYSMAC CPM2A, CX Programmer v6.0.
- Keyence : KV-24, Ladder Builder for KV.
GSM PLC
- Messung : P2211,Codesys
- Schneider : TWDLC,Twido soft v3.5
- Mitsubishi : Fxu/Fx2c,Gx Developerv8.2
- SCADA (Supervisory Control and Data Acquisition) :
- Intellution I FIX 32 Version 7.2.
- Wonderware In touch Version 9.5.
- VFD (Variable Frequency Drive) :
- Model - ACS150
- Parameter selection of VFD.
- Programming and Commissioning.
- P & FI (Pneumatics & Field Instruments):
- Pneumatics – ON/OFF Valves, PID Controlling of valves, Maintain Tank Level by
Feedback Method using Level Transmitter, Interface of RTD & Thermocouple.
- DCS (Distributed Control System):
- HONEYWELL- HC900 C50:
Model : HC900-C50-Version-2.1x,
Software : Hybrid Control Designer,
Controller Programming, Processor I/O Addressing,
Operator Interface (Experion Vista),
MMI Programming (HCI Designer),
Communication Protocols (Ethernet, Modbus, Profibus, Optical Modbus).
- PAC (Programmable Automation Controller):
- HONEYWELL-ML 50:
Model : MLMDN32S
CPU Type : MLMXBMS
CPU Version : 1.7
Software : Softmaster Ver2.2
Module : Position Control, High Speed Control,
Real Time Interface: Process Control, 2-Axis Motion Control, Servo Drive/Motor.
Implant training :
1. Southern Railways (Golden Rock)-Trichy.
Area of Mini Project: Train Lighting Systems
2. Thermal Power Plant (MTPS)-Mettur
Area of Training : Electrical Maintenance (Switch Gear)

Industrial Visit :
1. Easern Pay Roll (Relay Company) -Hosur.
2. VSRO (Vikram Sarabai Research Organization)-Kerala.
Software/Technical Skills:
Operating System : Windows 98, 2000, XP
Packages : MS Office, MATLAB
Professional Attributes
- Team Player,Reliable & consistent.
- Remarkable Presentation Expertise.
- Willing to learn.
Area Of Interest :
- Want to work in manufacturing and production industry, Testing and Commissioning
- Want to work in challenging situation
Extra Curricular Activities : Participated in NSS & NCC camps.
:Foot ball district winner in junior level.

[Guest]

Lisha Sukumar A.
E-mail : lishasukumar AT ymail.com

Objective :
To obtain an exciting and challenging job to bestow my knowledge for the development of the organization growth there by amplifying my skills.
Academic Profile :
- Bachelor of Technology in Applied Electronics And Instrumentation from Calicut University with 65% aggregate.
- Diploma in Instrumentation Technology (PLC and SCADA) and passed with 85% aggregate.
Work Experience :
- Six months experience in Sutherland Global Service as McAfee Technical Support Executive.
- Working as Interactive Social Media Advisor (Level 1-Advisor) in 24/7 Customer since September 2010.
- Responsible for Troubleshooting, servicing, upgrading of McAfee Software and Advising & assisting customer’s in retail issues.
- Strong knowledge in Computer Hardware, McAfee software and Programmable Logical Controller.
Certifications :
- Programmable Logical Controller.
Technical Expertise :
Operating systems Windows 98, XP, Vista, Linux, Windows 7
Languages C, C++
Application Softwares MS Office 2007, Photoshop CS3, MS-Windows, MS-excel, MS-word.
Packages Visual basic, MS office
Projects
Title Safety Interlock Of LPG spheres.
Technical Environment Programmable Logic Controller Software
Description
In BPCL,LPG is stored in spheres. As the spheres are nearly located, in case of LPG expansion it may cause explosion and may cause hazardous events. So in order to protect such spheres and to prevent such explosions a safety interlock for LPG spheres must be provided.
Responsibility
- Studied about the atmospheric and positions of the LPG spheres.
- Implemented the ladder logic diagram for the safety of spheres.
- Controlled the working of spheres using PLC software
- Designed the LPG unit in SCADA
- Interfaced PLC with SCADA
Team size
- Our project team consisted of three members.
Title Seven Digit Code Lock
Description
Usually key and locks are provided to lock our doors which will be easier for others for misusing it by opening the close door using some techniques.By the use of digit code lock it will lock the door with a relay driver circuit.If any wrong code is entered it will not unlock the door thus providing high security and its more reliable.As we are moving to the digitalized century,this project will be more helpful for the security of our door and it’s affordable in all ways.
Responsibility
- Designed the Block Diagram.
- Designed the Circuit Diagram.
- Fabricated the PCB.
- Soldered the metal parts using soldering iron.
- Imlemented the Circuit Diagram with a specific seven digit code1704570 which can be readily altered.
Team size
- Our project team consisted of three members.
Extra Curriculars
- Presented a Seminar on “Surface Plasmon Resonance” Which is based on Biomedical Instrumentation for the measurement of DNA hybridization,enzyme-substrate interactions,epitope mapping etc….
Recognitions :
- Achieved the award for Best Performer in Sears Online from 24/7 Customer on 25-2-2011.
- Appreciated by the client for handling hot issues.
- Achieved the ‘Above and beyond’ award for best performance from Sutherland Global Service.

[N.M.Manikandan.]

RESUME
N.M.MANIKANDAN
Branch : Electrical and Electronics Engineering
Degree : DEEE
Email To : manieee_86 AT yahoo.co.in
- OBJECTIVE :-
To Join a Well-Established, competitive and challenging environment where my knowledge can be shared and enriched, contributing to the company's Growth and in turn ensuring personal growth within the organization.
- QUALIFICATIONS
Qualification College / school
percentage
DEEE
(Diploma Electrical & Electronics Engineering)
Thanapandian Polytechnic, in Madurai during (2004-2007) 78.12% (first class)
HSC Balamanthiram higher Secondary School, Madurai
(March- 2003) 63%
SSLC Thana Paul high School, Madurai (April- 2002)
83%

- EXPERIENCE
SL.NO COMPANY NAME DESCRIPSATION EXPERIENCE
1 NOKIA INDIA PVT LTD, Chennai. Operator 30.08.2007 to 20.03.2009(1year,7months)
2 EXCEL ENGINEERING, Madurai. Team leader (TELECOM) 30.04.2009 to 01.12.2009.
3 Vadamalaiyan Hospital .
Madurai Electrician 20.12.2009 to till now
- EXTRA SKILL SET
Industrial Automation : PLC, SCADA, VFD, DCS
- DESIGN SOFTWARES :
PLC Software :OMRON,SIEMENS,KEYENCE,AB
SCADA Software : intellection Fix 32
- AREAS OF INTREST :
- Electrical Device & Circuits
- Electrical Machines
- Power Electronics
- Micro Controller And Its application
- Automation Programs
- PROJECT DETAILS :
TITLE : POWER GENERATION USING LIFT OPERATION
In this we are going to Access a LIFT Operation in BI-DIRECTIONAL Rotation. This Project we have done Power Generation Automatically Whenever Wastage Power is produced

[Unregistered]

SRIRAM.R
Email : srirammech19 AT gmail.com ,

CAREER OBJECTIVE :
A Mechanical professional seeking challenging opportunity to work for a renowned organization to enhance my knowledge, skills and techniques which can benefit the Organization.

ACADEMIC CHRONICLE :
Course Name of the Institution University/ Board CGPA/ Percentage Year of Passing
BE., Mechanical Engineering Sree Sakthi Engineering College Anna University Chennai 76.6* % May 2014
Higher Secondary Sree Ragavendra Higher Secondary School State Board 75.34% March 2010
SSLC Government Higher Secondary School State Board 76.5% March 2008
*up to 7th semester

TECHNICAL SKILLS :
** Pro-E (Creo2.0)
** Auto cad
** Solid works

COMPUTER PROFICIENCY :
** Basic C,C++
** Operating system : Windows
** Software Known : Microsoft office ( Word, Power point )

AREA OF INTEREST :
** Designing
** Maintenance
** Manufacturing

INTERESTS AND HOBBIES :
** Net surfing
** Designing
** Gardening

PROJECTS :
Minor “LEAN TIME MANAGEMENT”
Duration/Team Size 3 months/ 3 member
Role modifier
Environment Increasing the productivity by reducing waste

Major “DESIGN OF HEAT ENGINE BY USING CONVECTION MODE OF HEAT TRANSFER”
Duration/Team Size 6 months/ 3 member
Role Designer
Environment Renewable energy source

CO-CURRICULAR ACHIVEMENT :
WORKSHOP :
** I have participated the national workshop on “ADVANCES IN CNC PROGRAMMING AND OPERATIONS” at KUMARAGURU COLLEGE OF TECHNOLOGY in Coimbatore.
** I have participated the national workshop on “GREEN VEHICLE TECHNOLOGIES” at KUMARAGURU COLLEGE OF TECHNOLOGY in Coimbatore.
INPLANT TRAINING :
** I had done inplant training on designing and development in “ PRO-E ,CAD, SOLID WORKS” in the UNIQ TECHNOLOGIES in Chennai.

PERSONAL DETAILS :
Data of Birth : 19.09.1991
Parents Name : Mr.R.Rajendran & Mrs.R.Kumutha
Strengths : Hardworking, Information learning and sharing
Nationality : Indian
Languages Known : Tamil & English & Kannada (speak only)

DECLARATION :
I hereby declare that the above written particulars are true to the best of my knowledge and belief.
(SRIRAM R)
Place : COIMBATORE
Date : 30.03.2014