www.cmpdi.co.in Recruitment 2011 Central Mine Planning & Design Institute Limited : Assistant Driller, Civil Surveyor

[muthukalee]

CENTRAL MINE PLANNING & DESIGN INSTITUTE LIMITED
(A Subsidiary of Coal India Limited)
A MINIRATNA COMPANY
GONDWANA PLACE, KANKE ROAD, RANCHI-834 031
EMPLOYMENT NOTICE

RECRUITMENT TO THE POST OF ACCOUNTANT, ASSISTANT DRILLER, SURVEYOR (CIVIL) & JUNIOR SCIENTIFIC ASSISTANT Gr.II

Central Mine Planning & Design Institute Limited, a Mini Ratna Company and one of the profit making CPSUs in energy sector of the country invites application from Indian citizens for filling up the vacancies in the following posts :-

Name of Post : Accountant
No. Of Vacancies : 9

Name of Post : Assistant Driller
No. Of Vacancies : 19

Name of Post : Surveyor (Civil)
No. Of Vacancies : 15

Name of Post : Jr. Sc. Assistant Grade-II
No. Of Vacancies : 16

AGE LIMIT
The minimum age should not be less than 18 yrs. and maximum age should not be more than the age indicated below on the Last Date of Submission of Application (20.6.11) :
i) 30 years for General candidate.
ii) 33 years for OBC candidate.
iii) 35 years for SC/ST candidate.

GENERAL INSTRUCTIONS
1. Application Form along with employment notice can be downloaded from CMPDI Website www.cmpdi.co.in
2. Candidates fulfilling all the eligibility criteria should send properly filled-in application in prescribed format to the Dy. General Manager (P&A), Central Mine Planning & Design Institute Limited, Gondwana Place, Kanke Road, Ranchi-834 031 through Registered Post / Speed Post only. Application will not be accepted by hand.
3. Application Form must be accompanied with the following :
Demand Draft in favour of CMPDI payable at Ranchi of the value mentioned below :-
a) For General & OBC Candidates : Rs.100/=
b) For SC/ST Candidate : Nil.
4. Name of the post applied for should be clearly mentioned on the envelope containing application form in BLOCK LETTERS.
5. Last date of receipt of application is 20th June’2011.
6. Timely receipt of application shall be the sole responsibility of the applicant. Late receipt due to postal delay or delivery of torn / damaged application shall not be entertained.
7. Applicants fulfilling the eligibility criteria will be called for Written Examination.
8. Result of successful candidates in written examination will be published in CMPDI Website www.cmpdi.co.in
9. Those who will qualify in the written examination will be required to appear in Personal Interview for which letter will be sent to them through Registered Post/ Speed Post.
10. SC/ST candidate called for interview will be paid to and fro second Class Train Fare by shortest route from the address of correspondence to Ranchi on production of Railway Ticket.

More Details : http://www.cmpdi.co.in/docfiles/Rectt_May2011_Eng.pdf

[Guest-IJT]

Name : Md Reyazuddin
Email : mdr2ruddin AT gmail.com
Designation / Skillset : Site Engineer
Applied for the post of site engineer

Resume :
CURRICULAM VITAE
MD REYAZUDDIN
Career Objective : To pursue a challenging career in Construction and Designing industry, utilizing my skills for the growth of the organization, which in turn provides an environment, where in ethics and reign supreme, leading to personal and professional growth.
Schoolastic Record :
- 2004 Passed Secondary School Examination (10th) from Shafi Muslim High School Darbhanga, Bihar.
- 2006 Passed Senior Secondary School Examination (12th) from Q. A Inter Collage Darbhanga, Bihar.
Technical Qualification :
- Diploma in Civil Engineering first division with 63.88 % in 2011 from The Institution of Civil Engineers (India) New Delhi.
- Draughtsman Course in Civil first division with 80.95 % in 2008 from IMTI Mahdauli, Darbhanga, Bihar.
CARRER HIGHLIGHTS :
Total Working Experience = 2 Years And 10 Month
Presently Working With-
- Working as a Auto Cad Designer & Site Engineer with Designer’s Den Pvt. Ltd. New Delhi, India since Oct. 2010 to till date.
Job Responsibilities :
- Creating Auto CAD model and generating fabrication Shop drawings in cad format using in AutoCAD.
- Creating setting plan & details and Elevation Plan and section.
- Generating fabrication shop drawing (Column, Beam, Stair, Handrail, Brace, and Room).
- Converting standard connection details for the loose and filed weld from Raster to Vector using AutoCAD.
- Site visit to check the work as per drawing.
Previous Work History-
- Worked as a Auto Cad Designer with Sudatto Barua. New Delhi, India from Aug. 2009 to Sep. 2010.
Job Responsibilities :
- Creating Auto CAD model and generating fabrication Shop drawings in cad format using in AutoCAD.
- Creating setting plan & details and Elevation Plan and section.
- Generating fabrication shop drawing (Column, Beam, Stair, Handrail, Brace, and Room).
- Converting standard connection details for the loose and filed weld from Raster to Vector using AutoCAD.
- Site visit to check the work as per drawing.
- Worked as a Auto Cad Designer with Architectural Services. New Delhi, India from Aug. 2008 to Jul. 2009.
Job Responsibilities :
- Creating Auto CAD model and generating fabrication Shop drawings in cadformat using in AutoCAD.
- Creating setting plan & details and Elevation Plan and section.
- Generating fabrication shop drawing (Column, Beam, Stair, Handrail, Brace, and Room).
- Converting standard connection details for the loose and filed weld from Raster to Vector using AutoCAD.
Computer Competency :
- Working knowledge of Auto Cad 04, 06, 08, 2D & 3D
- Working knowledge of all updated Microsoft Operating System.
- Sound working knowledge of MS – Office and Internet.


-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4156672
Date & Time : 20th May 2011 8:56 PM (UTC)
IP Address : 122.176.228.46
Browser Info : Mozilla/5.0 (Windows NT 6.1) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.68 Safari/534.24
Predicted Country : India

[Guest]

I AM ROHIT KUMAR
S/O SRI GUPTESHWAR SAW
MY QUALIFICATION IS INTER 54% IN SCIENCE 2009
APPEARING ITI IN ELECTRICAL
EXTRA QUALIFICATION IS COMPUTER HARDWARE AND NETWORKING

[Guest]

CURRICULUM VITAE
AVIJIT KUMAR BURMAN
Email – avijitburman09 AT gmail.com
CAREER OBJECTIVE
To obtain a challenging position that offers diverse job responsibilities and an opportunity for career and personal advancement.
PROFESSIONAL QUALIFICATION
- Appeared for Group II in May2011 (Result Awaited).
- Passed Group I of C.A Final in the year Nov 2010.
- Passed C.A PE-II in the Year 2006.
- Passed Company Secretary(Final) in the year Nov 2010.
- Passed Company Secretary(Executive) in the Year Nov 2009.
ACADEMIC QUALIFICATION
Matriculation
- Passed matriculate from (CBSE)-Central Board of Secondary Education in the year 2000 with 68%.
Higher Secondary
- Passed Higher Secondary from West Bengal Council of Higher Secondary Education in the year 2002 with 69.5%.
Graduation
- Passed Graduation(B.Com Hons) from Burdwan University in the year 2005 with 60%.
IT QUALIFICATION
- Completed Computer Training Course as required by ICAI/ICSI.
- Working knowledge of MS – Office.
ARTICLESHIP TRAINING
Hajra, Singh & Dhar.
Hindusthan park, Asansol
Served for 1 year.
SatyaPrakash Gupta & Associates.
Served for 2 years.
Durgapur City Centre.
ARTICLESHIP WORK RESPONSIBILITIES
- Under Companies Act,1956 : Accounting, Statutory Audit, Internal Audit, Concurrent Audit
& Company Law Matters.
- Under Income Tax Act,1961 : Tax Audit, Computation of Tax for individuals, firms
& companies.
- Other Responsibilities : Preparation and maintenance of accounts of Individuals,
Firms and Companies, E-Filing.