www.gecareers.com GE India Technology Pvt Ltd Bangalore : Technical Leader

[mskavi]

GE India Technology Pvt Ltd
http://www.gecareers.com

Company Profile
Engineering Analysis Center of Excellence (EACoE) is the Engineering & technology hub for GE Infrastructure located at the John F Welch Technology Centre, Bangalore. The team is part of the Global Engineering team of the Infrastructure businesses like Aviation, Energy, Oil & Gas and Water technologies, engaged in high-end design and analysis of Aircraft Engine components, Steam / Gas / Wind Turbines and Generators and mechanical drives for oil & gas applications.

Designation Technical Leader â ASE â 834548

Job Description
* Analyze and suggest design changes to satisfy International Codes & Standards, Internal Standards and System Requirements.
* Review of the Design, Drawings, Specifications, Calculations (Stress, Flow or Basic Design) of all Gas Turbine Accessories
* Develop conceptual/preliminary/detailed design of Gas Turbine Piping Systems
* Guide/Review/Mentor the Basic (Piping) design / Optimized Piping Layout / Support Engineering / Study of Purchaser's Specification / Supplier's Bid Evaluations* Able to generate and drive the ideas to simplify systems.
* Define scope, plan and execute multiple Jobs with Ontime Delivery and Maintain the Quality
* Collaborate with GE Oil & Gas Florence and Technical Leaders and Managers to define Process, Product, Technology improvement areas and plan design reviews.
* Utilize Product Definition resources to execute assigned tasks working closely with Technical

Desired Profile
* Analyze and suggest design changes to satisfy International Codes & Standards, Internal Standards and System Requirements.
* Review of the Design, Drawings, Specifications, Calculations (Stress, Flow or Basic Design) of all Gas Turbine Accessories
* Develop conceptual/preliminary/detailed design of Gas Turbine Piping Systems
* Guide/Review/Mentor the Basic (Piping) design / Optimized Piping Layout / Support Engineering / Study of Purchaser's Specification / Supplier's Bid Evaluations* Able to generate and drive the ideas to simplify systems.
* Define scope, plan and execute multiple Jobs with Ontime Delivery and Maintain the Quality
* Collaborate with GE Oil & Gas Florence and Technical Leaders and Managers to define Process, Product, Technology improvement areas and plan design reviews.
* Utilize Product Definition resources to execute assigned tasks working closely with Technical

Experience 8 - 12 Years

Industry Type Oil and Gas/ Power/Infrastructure/Energy

Functional Area Engineering Design, R&D

Education UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization;Post Graduation Not Required

Location Bengaluru/Bangalore

Keywords Oil & Gas accessories knowledge , Unigraphics, AutoCADfabrication, welding, machining & assembly operations for Gas Turbine systems and components

Contact Sandhya
GE India Technology Pvt Ltd

Website http://www.gecareers.com

Job Posted 19 Aug

Reference 834548

[Guest-IJT]

Dear Sir / Madam,

I would like to apply for the post of structural drafts man.

I am having total 13 years 6 months experience drafting, detailing, 3d modeling.
I am having 6 years & above experience in marine structure drafting for following organizations,

1) Zentech marine engg. -3 years
2) Kavaerner power gas – 1 year
3) Keppel marine & offshore engg. Services. 2.5 years

Myself twicely deputed at USA-TULSA for job training & Pro-steel software training.

I am waiting for reply,

Thanks & regards

Milind G. Pawar
9820697955


MY CV

Milind Pawar 9820697955

EDUCATION AND QUALIFICATIONS
* Diploma in Mech.Engg. from Puna university (2001),
* N.C.T.V.T in the trade of Mechanical Draughtsman from Govt. of INDIA,(1996),
* Industrial Training Institute in the trade of Mechanical Draughtsman, Govt. of India. (1995),
* Diploma in Acad-R12, Mumbai (1996),
* Diploma in Acad-R14, Mumbai (1998).

KEY EXPERIENCE
Area of specialization - Offshore Structures, Mechanical Drawings, 3D PROJECTS.
I have over 13 years 6 months experience in drafting, out of total 7 year’s experience in Shipbuilding & Offshore Platform Structure related in Oil & Gas field. I was involved Structural & fabrication projects specialized in AutoCAD Design-Drafting, Detailing and Fabrication Drawings for Marine, Offshore Structure. The projects are prepared in AutoCAD 2007 & 2008, depending upon client preference, and include:
- GA's of Oil & Gas Structures: Drilling Rigs, Production Platforms
- Construction Drawing
- Bill-of-Material Preparation.
- Modification of Structural drawings.
- Preparation of quarters arrangement (Structural).
* Heliport structure (3D Model)
* On-shore structure – Derric (Vent boom-flare stack, ladder platforms, Skids)

PROFESSIONAL EXPERIENCE
Name of organization : JOHN ZINK – Koch chemical technology group ltd.
Post Held : Structural Designer (Civil Designer)
Duration : Feb 2007. to jully 2009
Responsibilities :
Also undertaken all Structural assignments as follows for various Projects.

- Material Take off.
- Lifting Concepts With 3-Dimensional Model,
- Mechanical Foundations, Main, Platform Drawings.
- Working on CAD-Works, Auto cad 2007 & 2008. (3D modeling)
- Training completed for 1st module of Pro-steel AT USA – tulsa.
Projects : Ras laffan olefin company - technip
: Thermal oxidizer
: Vent stack
: Pro-steel training at USA- TULSA for Structural Platform & Ladders.
: Burner – model & detailing

PROFESSIONAL EXPERIENCE
Name of organization : Keppel Fells Offshore and engineering Services Mumbai Pvt. Ltd, India
Post Held : Structural Designer (Civil - Steel Designer)
Duration : August 2005 to Feb 2007.
Responsibilities :
Also undertaken all Structural assignments as follows for various Projects.

- Basic design of FPSO & Semi-Submersible Rigs. / Mobile Rigs.
- Material Take off.
- Lifting Concepts With 3-Dimensional Model,
- Mechanical Foundations, Main Structure Penetration, Deck Drawings.
- Training For "Sesam Ginie" DNV Software.
- COG Calculations For FPSO With Naval Architecture (VCG, LCG, TCG)
- Very Important - Also Conducting a Introduction lecture on "Rig General Arrangement & Process For Structural Section."
- Also Act as a Committee Member For "Improvement of Acad Productivity & Standards"
Projects : R286- Ocean Rover
: R293 - Ocean Endeavour
: R302 - Black Ford Dolphine
: R303 - Ocean Monarch
: P194 - Hollond Project.

Name of organization : Aker Kvaerner Powergas information technology services Pvt. Ltd, Mumbai,
India
Post Held : Structural Designer (Civil Designer)
Duration : September 2004 - Jully 2005
Responsibilities :
Also undertaken all Structural assignments as follows for various Projects.

- Vertical & horizontal framing plans, mud mats, handrail, walkway,
- Deck drawing & connections, helideck, sketches, MTO,
- Lifting upending padeye, piling details & SRD Sketches, (Skin resistance to drive), conductor guide
- Load out beam for jacket & production platform, sea fastning etc.
- 15 days Site visit on “ONGC Platforms” at north fields for survey drawings.
Projects : 9 Well Platform - ONGC
: Gulf Onshore Platform - Banduq
: Pipe Replacement Project - ONGC

Name of organization : Zentech India Offshore and Marine Engineering Private Limited, Mumbai,
India
Post Held : Structural Designer
Duration : September 2001 - September 2004
Responsibilities :
Also undertaken all Structural assignments as follows for various Projects.

- Drill floor arrangement and Derrick structure.
- Framing plan and details of deck, Pipe rack storage deck, Riser storage deck etc.
- GA of Main deck, Lower deck, Machinery deck & Accommodation layout.
- Modification of Slot closure and cantilever arrangement of a rig.
- Modification of Drill floor, Pipe rack & Mud tank module for Nabors Offshore.
- Preparation of various piping systems such as Fuel oil, Bilge & Ballast, Compressed air, Fireman etc.. for marine operating manual.
- Preparation of Marine operating manual drawings of GA, Tank capacity, with Piping, ventilation, Fire-fighting systems for ENSCO.
Projects : Drilling Equipment structure - Kizomba
: South Marsh Jacket Sea fastning - Engicon International
: Kiewit Engineering Co., Omaha
: Pull-Down study for various Jack-up Rigs
: Upper Structure Drafing & MTO - Noble Drilling Services, Inc.
: Heliport structure – Noble Drilling Company.
: 8 Pile, 4 Pile structure Design - Pemex International
: Quarter’s arrangement, Safety Plan – Ensco, Al-ithiad
: Noble Roger Eason – Noble Corporation
: Olmsted Dam Project (3D Model)


Name of organization : CMS Computers Ltd.
Post Held : Mechanical Draughts man / Cad-Drafts man.
Duration : October 1998 to September 2001.
Responsibilities :

- Single line Junction & Map Drawings.
- Arrangement of aspect locations & positioning.
- Arrangement and fabrication details of heat sink.
- Structural section & detail’s of gantry.
- Signal location on junction.
- Single line phasing diagram.
- Preparation of manual drawings for Quality Assurance, R & D & Energy Management system department. Etc.
- All works are done under ISO Procedure.

Undertaken 3D Drawings assignments for various types Automatic Machines.

- 3D Drawings of Bill payment, Cash & Envelop depositer automatic machine.


All of these are prepared on Autocad Release 12 & R 14. Bill of Material prepared in MS-Office 97 package.
Projects
2D & 3D Detail Drawings of ATM machine & its’ accessories.
2D & 3D Detail Drawigs of Bill Payment Machines.
Detail Drawings of differen type of electronic gazets, instruments.
Time-o-log, Net-x-tender, Signal controller..etc….
3D drawings of ATM Machines for CITI-BANK.
Bombay – Puna highway ATC signal Project.
Bombay, Thane Signal projects, updates of new location

Name of organization : M/s Interra Technologies Pvt. Ltd. SEEPZ, Andheri.
Post Held : Mechanical Draughts man (GIS-Cad operator)
Duration : January 1998 to October 1998
Responsibilities :
- Planing of Wire centre, Duct formation, Switching centre & Cable info.
- Various types of cable placement, scrubbing a individually wire centre.
- Toll & Trunk cable path, terminal load coil & location of pole. Etc.

All of these are prepared on Autocad R14 & Microsation 95 package.

Projects - US WEST, YORKSHIRE.

Name of organization : M/s AB Marine Consultant. Thane.

Post Held : Structural Drafts man
Duration : September 1997 to December 1998
Responsibilities :
- Preliminary drawings meant for fabrication of Ships hull structure, bulkheads Sections, including Construction details of Barges, Cargo vessels & Towing tugs with accommodation arrangement.
- Plate nesting plan with development of fabrication details.
- Prepared as built drawings for ship repair & summarised Bill of material for it.
All of these prepared on Autocad R14 & B.O.M prepared on Ms Excel-95.
Projects : Chemical Tanker – Homa Offshore services pvt. ltd.
: 8 T.B.P. Tug – Alang Marine
: 16 T.B.P. Tug – Vinayaka Marine pvt. Ltd.
: 12 T.B.P. Tug – Procyon offshore services pvt. Ltd.

: Work-Boat - Eastern dredger

Name of organization : M/s Larsen & Toubro Information Technologies Ltd. Mahape, Thane.
Post Held : Jr. Mechanical Draughts man (GIS-Cad operator)
Duration : January 1997 to August 1997
Responsibilities :
- GIS Drawings of Cable information, Duct formtion, Toll & Trunk cable path, Terminal load coil & location of pole.
- Various types of cable placement, scrubbing a individually wire centre.

All of these are prepared on Cable-Cad package.

Projects - Bell Canada

Name of organization : M/s Exotherm Consultant engaged in process systems.
Post Held : Jr. Mechanical Draughts man (Cad operator)
Duration : September 1996 to December 1996
Responsibilities :
- General Arrgt. & fabrication detail Drgs for various types of vessels.
- Foundation layout, RCC support-structure for vessels & equipments in piping plant.
- Drawing of flow chart of Swirl mechanism.
- Splin flash dryer assembly & fabrication details.
- Development of ISO metric single line connections for piping assignments.

All of these are prepared on Autocad R13 & Office 95.

Name of organization :.M/s NELCO Pvt. Ltd
Post Held : Trainee Draughtsman
Duration : September 1995 to August 1996
Responsibilities :
- Drawing of panel board structural IGA / OGA.
- Module locations, Scematics circuits diagram.
- Single line diagram for PLC control.
- Panel board base frame & related detail’s
- Computer P.C.B., Television & Radio electronics circuits

All of these are prepared on Autocad R10.

PERSONAL DETAILS :-
NAME : PAWAR MILIND GAJANAN
RESI. ADDRESS : B, 301 SHRI KRISHNA DARSHAN , KHAREGAON,
KALWA (W), THANE 400 602.
DATE OF BIRTH : 18TH Jan 1978
MARITIAL STATUS : MARRIED
NATIONALITY : INDIAN
PASSPORT No. : A-238 5956
CONTACT No. : 9820 69 79 55 (MOBILE)
EMAIL : pawargmilind AT rediffmail.com
VALID U.S.A VISA : B1 / B2 TYPE,
VALID UPTO MAY 2008 TO MAY 2018.

[zeeshan anwar]

RESUME
Zeeshan Anwar
EMAIL :sami_miya2000 AT yahoo.co.in
Objective :
To be associated with the infrastructure planning and designing of career oriented firm thus ,be a part of a well established company where I could enhance my abilities and contribute my skills to the improvement of the field and open my self to personal growth and to improve my knowledge and skills of hard work which dedicated ,sincerely towords my job and execute the responsibilities to me and to succession every endeavor and quality with requirement of this time.
Eductional Profile :
- Bachelor of technology in mechanical engineering from royal institute of technology& science ,affiliated to JNTU hyd. In the Academic year (2007-2011)
- Intermediate from DATAR vocational(bridge course) Jr, college.
- SSC from the golden rose high school.
Technical skills :
- The mini project on fuel and lubrication system in automobile engine.
- The main project on Design and analysis of lime briqutting machine.
- QUALITY CONTROL & ENGINEERING INSPECTION
- MS OFFICE
- Computer hard ware
- Cad cam :
2D & 3D modeling using Auto Cad.
- Certified pipe design engineer
From sanjary educational academy.
ISO 9001 :2008 certified institute.
And the project submission on process piping system as per ASME B31.3
Design project (1) on as per ASME B31.1 (ARAMCO oil & gas piping plant design)
Design project (2) on as per ASME B31.3 (SABIC oil & gas piping plant Design)
The Software of pipe Designing : Ceaser 0.5 version,pipe design system,pipe pro version,piping instrumentation diagram(P & ID)
Post for apply : Assistant Design Engineer
Work Known : Through this I can design and analyze the stress on the pipe.
Personal skills :
- Comprehensive problem solving abilities good verbal and written communication skills,
- Willingness to learn, team facilitor and hard worker.
Hobbies :
- Playing cricket,volley ball,traveling.
Strengths :
- Hard working and Punctual nature
- Commitedand dedicated to words achiving the goals