www.cg-coreel.com CG Coreel Logic Systems Ltd Bangalore : Field Application Engineer

[Admin]

CG CoreEl ( cg-coreel.com )

Company Profile
CG CoreEl, as a part of its Technology Solutions Division is into Semiconductor Representation and Semiconductor Product Marketing for Xilinx India. We partner with Global Leaders like Xilinx, Mentor Graphics, Carbon, CoWare to name a few.

Experience: 2 - 5 Years
Location: Bengaluru/Bangalore

Job Description
-- Experience in FPGA/ASIC design (involved in at least one full chip / FPGA design life cycle)
-- Strong Digital Design Skills.
-- Knowledge of Xilinx, Altera or Actel architectures.
-- Experience on handling multi million gate FPGA Designs.
-- Expertise in VHDL/ Verilog RTL Coding.
-- VHDL/ Verilog based test bench development.
-- Expertise in Synthesis and Place and Route tools for FPGA-- s.
-- Scripting language expertise either on PERL, TCL/TK, and AWK.

Desired Candidate Profile
-- Take on the role of providing technical consulting services to clients using Xilinx products.
-- Influence the Client in helping him / her make architecture level decisions using Xilinx FPGAs.
-- Instrumental in driving Xilinx products deep into various customer product designs.
-- Interact closely with Xilinx to understand new technologies/architectures and effective implementation of customer applications on Xilinx.
-- Assist Sales in all pre-sales and post- sales activities.
-- Training Corporate Clients on Xilinx development tools (FGPA, EDK, System generator, high speed interfaces etc.)
-- Understand Customer Product Architectures.
Mandatory:
-- Hands on experience on either 16 or 32 bit processors and micro controllers like Power PC, IBM PPC 405, Intel x86, ARM.
-- Knowledge of C/C++ and Assembly Languages

Address:
Sandeepani
21, 7th Main,
I Block Koramangala,
Bangalore,Karnataka,INDIA 560034

http://cg-coreel.com

Keywords: Field Application Engineer

[Guest]

RESUME

Basanth . S basanth_9samrat AT yahoo.co.in

Objective
Seeking a position to utilize my skills and abilities as a Firmware Developer in Embedded Services that offers security and professional growth while being resourceful, innovative and flexible.

Technical knowledge and skills
I have 4+ years of experience in Embedded Systems as a Firmware Developer specializing in Software coding concept. As a Firmware Developer I have been involved in target coding, development and testing. The Coding aspect involved writing Source code according to requirement and design. Development of GUI(Graphical user Interface) applications. Involvement with the Hardware team, during the development and Testing of the Project Module.

Standard and Architecture
INTEL 486
MC9S1DP512, MC9S1XDP512 Automotive Microcontrollers
AM186CU Microcontroller
8051 Microcontroller
PIC Microcontroller
PCI Communication
UART & OCTAL UART Communication
USB 1.0 Communication
Serial Peripheral Interface
I2C
Memory Devices – NAND Flash, EEPROM, NVSRAM,SRAM, DRAM.
GUI(Graphical User Interface)
ADD-ON Cards – ADC,DAC,DIO,UART.
CPCI –API’S

Skills
Microsoft Visual Studio, Free Scale Code warrior, Keil Compiler ,Intel (metaware) .
Operating Systems
Windows , Linux(basics).

Personal Experience
Worked as Trainee Engineer in VAP Technologiess , from July 2006 to August 2007.
Working as Engineer in AutoTEC Systems Pvt. Ltd. since September 2007.
(www.autotecsystems.com)

Project Details




Key board display controller card controls lamp load and alpha numeric display.A CPLD present in the KDC card receives scan code from Host and sends the code to the controller which uploads the lamp condition to PC through RS422/RS232 interface. Lamp load can also be controlled through front end software A dimmer control circuit is provided in the card which accepts 115V AC externally and controls the brightness of the lamp load. The controller used here is P89V51RC2.
Resources : SDCC compiler, DOS.
Language : Embedded C.
My role : Coding on Console (front end software) and Target Application.
Testing of the entire system.

DisplayPort Signal Generator (DPSG) unit is developed to display different resolution and pattern on DVI/HDMI monitor . The user through the front-end switches can select the different resolutions and patterns. A (40X4) LCD is provided to view the settings.
Resources : Microsoft Visual Studio, Paradigm Compiler, AM186CU Microcontroller.
Language : Embedded C.
My role : Coding on Target board for Display and Keypad.

This Protocol is used as Interface between MIL1553 MUX BOX Communication channel and Interface Controller. The Host Software send the Commands to the target Interface Controller and the controller in turn Communicates with MIL1553 MUX BOX and Switches the relay for RT,BC,MT communication. The application Protocol between the Host software and Interface Controller is implemented using asynchronous RS232 serial lines at 115200 b/sec.

Resources : MC9S12DP512 Microcontroller, Free Scale Code warrior, P&E Debugger, Processor Expert.
Language : Embedded C.
My role : Coding on Interface Protocol.

This Memory Module is capable to access data (16 & 32 bits) at a speed ranging from
200ns to 100us from data acquisition card through backplane and stores it in file format in onboard memory. This data is uploaded into PC through USB port for offline analysis.
The microcontroller is interfaced with Flash ,SRAM ,FPGA ,CPLD ,NVSRAM.
The GUI application is provided for accessing OMM target resources.The application provides the means of operations like reading from and writing to memory ,Nandflash memory read/erase and also uploading NANDFLASH data into file.

Resources : AM186cu,paradigm compiler, 512kb flash(program memory), 512kb SRAM,
256kb NVSRAM , 8GB NANDFLASH.
Language : Embedded C.
My role : Coding on GUI (front end software) and Target Application.
Testing of the entire system.

The OBP–486 is based on Intel’s 486DX2 Microprocessor. Software major components Includes Initializing modules for Microprocessor, drivers for all on-board peripherals, API’s to access peripherals, various test API’s to test Peripherals and Console Module to provide user interface.

This software is designed for accessing all hardware components and to perform various tests on peripherals. Interface component is provided to handle user inputs and to give peripheral access to the user through RS-422.
Peripherals Interfaced : ADC,DAC,DIO,SRAM,FLASH,NVSRAM,FIFO,UART

Scholastic Profile :
Bachelor of Engineering from R.N.S Institute Of Technology in Instrumentation Technology branch on June , 2006.
Diploma from P.V.P Polytechnic in Instrumentation Technology and Control Engineering branch on May , 2002.

[Guest]

RESUME
K.O.Sureshkumar,
Email ID : sureshkumar.k.o AT gmail.com
CAREER OBJECTIVE :
- Dedication and hard work with smart and fast are the investment I can make on any job To make strong contribution to organization goals through continued development of professional skills
KEY SKILLS :
- Excellent communication, written and presentation skills that helps to build long –term
Association between customers and the organization
- Ability to lead a team and train the members from time to time
- Thorough understanding software programming and embedded engineering principles from
Designing to manufacturing systems and apply them to organizational needs
TOTAL EXPERIENCE : 4 yrs of professional experience in Field application engineer and technical Engineer
WORK EXPERIENCE 1 :
- Designation : “Field application Engineer”
- Company Name : VI Micro Systems Pvt ltd, Chennai,
- Duration : March 2008 – June 2010
Role :
- Provide technical guidance to the manufacturing team by giving them information about the
Industry standards, recent developments in technology and details of technology used by
Competitors in market
- Coordinate with sales staff and marketing managers to design and implement strategies to
Create product awareness and demand in the market
- Provide guidance on product specifications, applications and testing product software with by
Combining technical knowledge and business requirement to develop solution
WORK EXPERIENCE 2 :
- Designation : “Technical Engineer “
- Company Name : Intabce technology solution pvt ltd Chennai,
- Duration : August 2010
Role :
- Perform responsibilities of promoting digital signage player and technologies by hospitals customers, and customer service representatives
- Responsible for giving Demo and developing marketing collateral for successful product promotion
EDUCATION :
- Successfully completed a bachelor’s degree in Electronic communication engineering from
Paavai engineering college (Anna University) in the year 2006

TRAINING PROGRAM :
- Successfully completed a Diploma in Embedded systems from UTL Technologies Chennai in the
Year 2007
TECHNICAL EXPERTIES :
- Programming Language : C, Embedded C,
- Real time operating Systems : MU/OS II.
- Integrated Development Environment : IAR, keil,
- Software Package : Daintree
PERSONALITY :
- Hard working, committed &dedicated to make things happen
- Ready to accept challenges
- Very enthusiastic and positive work attitude
- Willing worker and capacity to take additional responsibilities
REFERENCE :
References and testimonials, if required shall be furnished immediately
Date :
Place : (Sureshkumar.K.O)