Walk in Interview Chennai 2011 : Tractors And Farm Equipment Ltd

[muthukalee]

Company Name : Tractors And Farm Equipment Limited,

Company Location : Chennai

Candidate Profile :

Production Paintshop Incaharge
Plant Production and Paint shop planning and development
16th & 17th April 2011

WALKIN - at Chennai
Hotel President 25,
R K Salai (near KAlyani Hospital)
Chennai
09.00 am to 05.00 pm

Job Specification :

BE MEch / Auto
with 06 - 15 years of experience
Position in Middle mgt

About us :
TRACTORS AND FARM EQUIPMENT LIMITED
TAFE is a US$750 million tractor major incorporated in 1960 at Chennai in India, in collaboration with Massey Ferguson (now owned by AGCO corporation, USA). TAFE acquired the Eicher tractors business, its engine plant at Alwar and transmissions plant at Parwanoo through a wholly owned subsidiary “TAFE Motors and Tractors Limited.

Contact us :
Tractors and Farm Equipment Limited,
35, Nungambakkam High Road,
Nungambakkam,
Chennai - 600 034.

http://www.tafe.com

[Guest]

DINESH KUMAR
Er.dineshkumar2007 AT yahoo.com
Engineer.456 AT rediffmail.com

PERSONAL BRIEFING :-
Determined, hard working and sincere, aiming for a research oriented academic position.

EDUCATION DETAILS :-
2004-2008 Shivdan Singh Institute of Tech & Mang. Aligarh (U.P.) Affiliated to U.P. Technical University Lucknow (U.P.) Bachelor of Technology (Ag. Engg.) with 73.76 %
10+2 U.P. Board Marks – 66%2004
10th U.P.Board Marks - 50% 2002

TRAINING PROGRAM UNDERGONE :-
1 .One month Training in Northern Region Farm Machinery Training And Testing Institute Hisar (Haryana) (July 2007)
2 . 4 week duration, training at Prag Dairy, Sasni Hathras (U.P.). (August 2006)

EXPERIENCE :-
1. 1 year experience NATIONAL RURAL EMPLOYMENT GUARANTEE
SCHEEM (N.R.E.G.A) In RAJRSTHAN On post J . ENGINEER
work nature :
- Prepare labour budget !
- Prepare annual work plan !
- Inspection technical estimate !
- Find out valuation of work !
- Technical supervision of work in panchayat smites !
- Represent annual and monthly progress report !
- Prepare complete certificate of work after complete work !
- Complete all work which was related to the plan !

2. One year experience in INTER TOUCH METAL BUILDING (P) LTD in DELHI On post SITE ENGINEER
Work nature :
- Prepare and construct roofing system for metal building structure like as common wealth games stadium !
- Guide company worker/labour for good quality work !
- Arrange metal/tool/m/c in site for work !
- Prepare company worker progress report !
- Inspection of work which are do by company labour !

[Guest]

RESUME
D. Vinoth Kumar
svino19 AT ymail.com

OBJECTIVE :
To pursue career in a progressive organization, where my knowledge and skills are well utilized for the development of the organization and to gain experience for my career growth.

PERSONAL STRENGTHS :
- Adaptability.
- Can overcome pressure situation.
- Prioritize work

SUMMARY OF QUALIFICATION :
Name of the Institution Course Percentage(%) :
Vel Tech Engineering College B.E.AUTOMOBILE 73
Alagappa Matriculation School Higher Secondary Exam 75
Don Bosco Matriculation School TENTH 68.3

AREA OF INTEREST :
- AUTOMOTIVE CHASSIS
- VEHICLE MAINTENANCE

PROJECT WORK :
- COMPNY NAME : TVS MOTOR COMPANY LTD,HOSUR.
- PROJECT TITLE : “ELIMINATION OF WHEEL TIGHTNESS AND DEVELOP A DEVICE FOR OBJECTIVE MEASUREMENT IN THREE WHEELER”

EXTRA ACTIVITIES :
- Visited industrial visits (Ashok Leyland ,Maruti Service Masters)
- Visited AKME 08 EXPO (Chennai)and AUTO EXPO 2010.
- Visited imtex2011 Tool Tech expo (Bangalore).

TECHNICAL QUALIFICATION :
- AutoCAD
- Microsoft Excel

EXTRA-CURRICULAR ACTIVITIES :
- Cooking food
- Playing cricket
- Listening music

[gurusamy_be]

GURUSAMY.G
Email : gurusamy_be AT yahoo.com

PURPOSE STATEMENT :
Aspiring for a growth oriented career in Production Planning & Control / Operations & Maintenance with a growth oriented organisation preferably in Manufacturing & Automobile Industry,fabrication units,switch gear manufacturing industry.

PROFESSIONAL APERCU :
- A competent professional with over 18 years of experience, presently associated with SFO MUSCAT AS DIVISIONAL MANAGER – MANUFACTURING UNIT (IN TAKING CARE OF THE ENTIRE UNIT INCLUDING SALES,MATERIALS HANDLING, PURCHASE,BUSINESS DEVELOPMENT ETC,FOR THE SWITCH GEAR PANEL MANUFACTURING, FABRICATION, AUTOMOTIVE ) MUSCAT, SULTANATE OF OMAN.
- A keen strategist with expertise in managing entire operations with key focus on profitability & optimal utilization of resources.
- Expertise in handling shop floor production in press shop, press tool components,Fabrication of sheet metal,SS fabrication, pipeline fabrication,,AC ducting, Electrical control panel board manufacturing,Bus bar manufacturing for LV panel, MIG welding, spot welding, projection welding, assembly, process capacity, standard manning, daily productivity index, talk time and target cycle time calculation etc.
- Skilled at tracking breakdowns and rectifying it for the smooth running of operations using latest maintenance techniques.
- Possess in-depth knowledge of increasing productivity by improving process sequences & labour motivation.
- Comprehensive exposure in Windows 97 Works Group, M.S Office, AutoCAD. 12, AutoCAD-2000 & PRO-Engineer 2000, C.N.C Programming & operations.
- Excellent communication skills with troubleshooting, problem defining & solving capabilities and skills in solving technical as well as commercial issues.

PROFICIENCY FORTE :
Production Planning & Control :
- Planning day-to-day strategies, budgets, production schedules, along with resource allocation and machine loading for optimum output.
- Responsible for the process capacity, standard manning, daily productivity index, talk time and target cycle time calculation etc.
- Minimizing performance bottlenecks for high productivity with maximization of material & machine.
- Appraising the prevalent production systems/ processes, identifying loopholes if any and undertaking result-oriented measures for alleviating them and documenting the same.
- Carrying out the production delay analysis of both mechanical equipments and hydraulic press up to 400 T capacity & Mechanical Press up to 1000 T capacity.
- Effectuating standardized operations through cycle time reduction, working efficiently without wasteful motions.
- Directing the development & implementation of key procurement strategies/contingency plans & ensuring that plans are aligned with production requirements.

Operations & Maintenance :
- Planning and effecting predictive & preventive maintenance schedules for various machineries and equipments to increase machine up time and reliability.
- Proactively identify areas of obstruction / defects and conducting service and repair to rectify the equipments through application of trouble shooting tools.
- Handling the various
- CNC machines like VMC, horizontal, vertical milling machine that is all German made.
- Production department, which includes press shop, press tool components,Fabrication of sheet metal,SS fabrication,AC ducting, Electrical control panel board manufacturing,Bus bar manufacturing for LV panel machine shop, welding shop (weld shop which includes spot welding, robot, MIG welding, arc stud welding & seam welding), CNC machine shop & assembly shop.
- Carrying out planned maintenance activities for improving the availability of machineries.

Quality Assurance :
- Handling different guidelines as per the norms keeping update and implementation of the same.
- Developing quality plans in co-ordination with production teams; enabling achievement of quality targets preparing internal audit schedules.
- Adhering to various implementations of PPAP & PSW procedures in manufacturing methods as per Ford & Toyota requirement, Quality Systems - QS9000 / ISO 9000 as per FORD requirements, TPM & Kanban as per customer requirements.
- Elimination of waste like over production, correction, material movement
- Responsible for quality awareness in operators through regular training.

Process Enhancements :
- Identifying scope for :
- Planning, implementing & monitoring of technological changes to enhance operational efficiency.
- Modifications in process flow, working practices etc. for controlling & reducing rejection in process.
- Supporting various activities as utilized to identify and analyze operational improvement opportunities.

EMPLOYMENT HISTORY :
Organisation : SFO (SHARIKAH FANNIYAH OMANIYAH) MUSCAT,SULTANATE OF OMAN
Designation : DIVISIONAL MANAGER-FABRICATION UNIT
Duration : 20 DEC’09 to TILL DATE
Key Accountabilities :
Expertise in handling shop floor production in press shop, press tool components,Fabrication of sheet metal,SS fabrication,AC ducting, Electrical control panel board manufacturing,Bus bar manufacturing for LV panel, MIG welding, spot welding, projection welding, assembly, process capacity, standard manning, daily productivity index, talk time and target cycle time calculation etc.
Job Description :
- Improve the company’s market share in the Switchgear business,fabrication business, and Automotive business
- Inculcate a customer focused culture and continuously improve the systems to support smooth business operations.
- Lead the marketing and order execution teams in developing company- s products and services in terms of Quality, Delivery and value for the price paid by the customer.
- Resource Planning by way of manpower, plant and machineries, finance etc
- Lead the Applications Research team in developing new products and improving existing ones
- Overall leadership and mentoring to owners of different business functions reporting to him for a sustained Organizational Growth

Organisation : Arabian Axles Foundries and Spare Parts Co., Saudi Arabia (Manufacturer of Bogies which is used for the Heavy transport vehicles with latest German Technology)
Designation : Manager Production and Planning Control
Duration : 2 Nov’03 to 10 Nov 2009
Key Accountabilities :
Handling the planning in manufacturing process and assembly processes For Various Types of Components, Knowledge of Tools like C.I.T, and PFMEA.
Certifying that production going as per plan and to satisfy the customer requirement without fail.
Implementation of continuous improvements process and document record of the before and after conditions
Executing the project within the scheduled time frame.
Communicating the target to achieve as per production plan to satisfy the customer requirements.

Organisation : T.V.S Lucas, India (Supplying Auto Electrical Parts such as Starter Motor, Alternator,
Distributor, Head Lamp, Dynamo, Dynamo Regulator for both Commercial Vehicles and Cars)
Designation : Module Engineeer Manufacturing
Duration : Jul’01 - Oct’03
Key Accountabilities :
Executing the continuous improvements like kaizen in each module to increase productivity & quality of the product.
Implementation of quality system, daily work management that include all details of production achievement & delay, corrective action for future to avoid delay.
Resolving the customer complaint and taking corrective action to reduce rework, rejection and achieve production plan on time.
Achieving line balancing among all processes in terms of production timing

Organisation : Arvin Exhaust India Pvt Ltd., Chennai (Joint venture Anand Group with ARVIN & Meritor U.S.A)
Designation : Assistant Manager Manufacturing
Duration : Dec’99 - Jun’01
Key Accountabilities :
Managing the production as per customer requirement like Ford & Toyota, wherein major customer of Arvin Exhaust.
Launching out the new program and projects. (Experience In project Management Tools).
Handling major customer like ford India Ltd, Toyoto Krilosker Motor Ltd (TKML). With related to Quality issues such as manufacturing defect, warranty & field failure.
TPS (Toyota Production System) in Toyota Kirloskar Motor Company Ltd., at Bangalore.
Planning manufacturing and assembly processes for various types of components, knowledge of tools like C.I.T, and PFMEA, internal and external customer problem solving by 8D processes.

Organisation : K.R.U.P.P J.B.M Pvt Ltd., Chennai (Joint Venture between Krupp- Cam Ford Ltd U.K & Jbm Ltd Delhi)
Designation : Senior Engineer-Projects
Duration : Nov’98 - Dec’99
Key Accountabilities :
Handling project development in KJBM in production as per customer requirement like FORD which is only one customer of KRUPP JBM.
Involving in new tool trails in pres shop like chasis tooling & BIW toolings.
Established PSW for each part for FORD IKON CAR as per FORD requirements, Chassis Components Tool Trail for Ford Ikon At Krupp Camford Ltd, Bedford United Kingdom.
Setting up the Die Setting in Presses and Manufacturing of BIW Components, training about Mig Welding and Projection Welding for Ford Ikon Car at JBML (Ancillary Unit of Maruti Udyog Ltd. Gurgaon).

Organisation : Universal Radiator Ltd., Coimbatore (Supplying Auto Components to Leyland HMT, HML, Maruti, Lister Perrer U.K)
Designation : Production Engineer - Press Shop & Tool Toom
Duration : Jul’93 - Nov’98
Key Accountabilities:
Involvement in tool modification in tool room to increase productivity in press shop.
Maintaining the strip layout for each component to utilize maximum raw material for each components for reducing scrap material.
Implementation of continuous improvements process and document a record of the before and after conditions.
Implementation of Quick Setup Change Over (Lead Time Reduction) in press shop.

TRAINING ATTENDED :
- Underwent various training for
- Chassis Components Tool Trail for Ford IKON at Krupp Camford Ltd., Bedford United Kingdom.
- Die Setting in Presses and Manufacturing of Biw Components, training about MIG Welding and Projection Welding for Ford IKON Car at JBML (Ancillary Unit of Maruti Udyog Ltd., Gurgaon).
- TPS (Toyota Production System) in Toyota Kirloskar Motor Company Ltd., Bangalore.
- Quality Systems-QS9000 by Ford India Ltd., Chennai.
- Process Capability Induces in Theory and Practice by Arvin Meritor Team.
- Implemented the Kanban Training given by Denso kirloskar, Asian NTTF at Bangalore.
- Training Programming on Arvin Quality Production System, Continuous Improvements Methods, Employee Involvements and Kanban given by Arvin Meritor Team. (U.S.A)

ACADEMIA :
B.E (Mechanical Engineering) Madurai Kamaraj University Year 1993
(M.B.A ) Madurai Kamaraj University
S.A.P Systems SunTech,Chennai

[Unregistered]

RESUME
HARIBABU D
haribabu_sathish AT yahoo.co.in
haribabu_sasi AT yahoo.co.in

Career objectives :
seeks a challenging career in a concern that takes advantage of my existing skills while stretching me to acquire additional technical skills and abilities.

Academic Detail :
** Diploma In Mechanical Engineering (1994 – 1997)
First Class With Distinction.(89%)
Swamy Abedhanandha Polytechnic.(Thellar-604406,Tamilnadu,India)

Soft Skills :
** Ms Office, Windows
** Autocad 2000

Abroad experience :
Worked in SINGAPORE. I worked with one of the major automobile oil seal mould manufacturing company
In jurong west of Singapore, worked as a team leader of tool room.

Types Of Machine Handled & Exposure For Metal Parts
** CNC Vertical Turn Mill – Copper & Sinumeric 840C
** CNC– Engraving- 5axis - Lang
** CNC Turing - Fagore
** CNC Vertical Milling - Emco V-16b & FANUCOI Mc)
** CNC Engraving 4axis -Hisu Fong &Fanuc
** Press machine 250,160,110,80ton - hanoul & simpac

Types Of Machine Handled & Exposure For Rubber Parts
** Rubber injection moulding machine – 250ton
** Rubber compersion moulding machine – 100ton
** Knneder mixing mill 75 liter - woosung
** Rubber mixing mill 18” - woosung

Experience Detail :
1. M/S ADDISON & CO LTD., (AMALAGAMATION GROUP) CHENNAI INDIA
Manufacturers Of Drill Bits,Reamers,Cutters,Turning Tools Etc.,
Period Feb98 To Feb99 Designation - Inspection Trainee In Quality Control Dept

Roles & Responsbility :
** First Off Approval
** Patrol Inspection
** Vendor Product Sampling Inspection
** Check Sheet Updating
** Reporting To Supervisor
** Instrument Handling

2. BRAGA INDUSTRIES., (MRF SISTER CONCERN) CH-98 INDIA
Manufacturing Of Automobile Tyres & Tube Machinery's
Period Jan2000 To Sep2004 Designation – Production Supervisor (Cnc Division)

Roles & Responsbility :
** Preparing and Checking the CNC Program for Vertical Turning Machine (Copper make ) Siemens 840c
** Operating the Vertical Turing Lathe
** Preparing and checking the CNC program for LANG Engraving Machine (LITRE software)
** Operating Lang Engraving Machine
** Proving and developing samples of new components
** Job setting & tool selection
** Fixture & mandrel making for which is used to machine the rings & drums.
** Process sheet preparing
** Tool fouling & path checking with AutoCAD
** Tool inventory updating
** MTBF,MTTR,MDT Chart updating
** Monthly report updating
** Daily check sheet updating
** Trouble shooting

3. NOK ASIA (P) LTD., (A NOK GROUP) SINGAPORE – 627976
Manufacturers Of Automobile Oil Seal Mold
Period Dec2005 To Jan2010 Designation - Team Leader – Production (Cnc Division)

Roles & Responsbility :
** Preparing and Checking the CNC Program for Rear Turning Lathe (FAGORE CRL 1640 ) Fagore control
** Operating the CNC Rear Turing Lathe
** Preparing and Checking the CNC Program for Vertical Milling Machine(SHUN CHUN) (Fanuc-oi mc)
** Operating the CNC Vertical Milling Machine
** Preparing and Checking the CNC Program for Engraving Machine( HSIU FONG EM321) Artcam Software
** Operating the CNC engraving machine
** Proving and developing samples of new components
** Job setting & tool selection
** Exposure in master cam
** Daily check sheet updating
** Reporting to ASST MANGER
** Daily meeting conducting
** Follow up daily target & OTD order

Cnc Achievments :
** Loop Programming
** Sub Program For Tool Offset Taking
** Rim Centering & Curbar Programming
** Setting Time Reduced (Radius Value Marked In Table)
** Reduce the Cycle Time
** Reduce the Consumption (Insert)

Autocad Exposure :
** Draw the Mould As Per Blue Print Drawing
** Tool Fouling Checking In Auto Cad.
** Programming Co-Ordinates Takes From Auto Cad

4. DMC AUTOMOTIVE (P) LTD., THIRUVALLUR DIST – 602023
Manufacturers Of Automobile Engine Gasket
Period Apr2010 To Till Date Designation - Asst Manger Production(Press Shop & Rubber Injection Division)

Roles & Responsbility :
** Functioning As Production In-Charge And Handling Overall Activities To Smoothen The Production Level.
** Preparing production LOAD FACTOR for every month
** Conducting daily shop floor meeting
** Focus to increasing the productivity through c/t reduction, setup time reduction & rejection
** Preparing monthly production plan
** Target to Achieve the Production for daily, weekly & monthly
** Preparing process sheet & process validation
** Improve the multiskill level among employees in the process to overcome emergencies.
** Cross Functional Team (CFT) member manufacturing process (Control plan, Process flow &FMEA)
** Preparing weekly & monthly production report.
** Preparing plan vs actual chart, productivity chart & M/C utilization chart
** Monitoring & conducting shop floor 5S ,3C & FIFO trough Layer Process Audit (LPA)
** Co-ordinate with TS audit, 5STAR audit & customer audit
** Preparing of work instruction & JES
** Preparing MTTR Chart MDT chart & MTBF Chart.
** Preparing the diesel consumption & power consumption chart

Exposure In Rubber Gasket Manufacturing Process :
** Exposure in rubber injection moulding machine (make desma 250 ton)
** Exposure in rubber mixing machine & process ( 17L kneeder machine & 18”mixing mill)
** CRB(Cold Runner Block) moulds
** Exposure in rubber post curing process (oven)
** Exposure in compression injection machine for as per ASTM sample testing
** Exposure in rubber mixing process
** Exposure in rubber Testing machine(video measuring, universal load test, money viscometer ,rheometer & oil bath)

Special Work :
** Exposure In Purchasing (Cnc Injection Mould Machine,compression moulding & vibro barell machine Etc.,)
** Exposure In Maintenance (Aspect & Impact ,Preventive,Predective,History Card)
** Exposure In Stores Dept (Stock Detail,FIFO, Inventory For Rawmaterial & Finished Goods )

Prestigious customer :
** Hyundai India Ltd.,
** General Motors India Ltd.
** Mobies India Ltd.
** Inzi Control Ltd.,
** Mando Breaks Corporation.

Training Programme :
** Kaizen
** 7QC Tools
** TPM
** ISO/TS16949 :2008

Personal Profile :
Name : D.HARI BABU
Father's Name : C.M. Dhakashna moorthy
Date of birth : 13:08:1977
Nationality : Indian
Languages known : Read, write & speak - Tamil & English

I do hereby confirm that the information given above is true to the best of my knowledge and belief.
Place :
Date :
Signature