Instrument Supervisor : Resume CV

[Guest-IJT]

Name : chintan
Email : chintan_shah_1984 AT yahoo.co.in

OBJECTIVES : To work in a dynamic environment where I can enhance my skills and potential to the best, and to utilize my technical and management ability to create new avenues.

EDUCATIONAL QUALIFICATION :
Std / Degree Board/University Month/Year of Passing % Obtained :
S.S.C. G.S.E.B. March-2000 58.29
I.T.I.(I.M.C.P) N.C.V.T. Octo-2002 71.42
Apprentice(G.S.F.C) N.C.V.T. Octo-2003 75.84
Diploma electrical (DLM) T.E.B May/June-2010 66.26

COMPUTER KNOWLEDGE :
- Operation System : MS Windows 95/98, Windows NT 4.0
- Software Packages : MS-Office 97/2000/XP, D.T.P.(6.5)

INDUSTRIAL TRAINING :
Sr. No. Organization Name Type Duration :
1 GSFC – Baroda (apprentice) Process From : Oct. 2002 to Oct. 2003
2 Remi Metals Gujarat Ltd. Manufacturing From : Feb. 2004 to Oct. 2004
3 Nirma Ltd. Soda – Ash Comlex, Bhavnagar, Gujarat Heavy Chemical From : Nov. 2004 to Oct.. 2005
4 Ionexchange India Ltd. Chemical From : Feb 2006 to April 2008
5 J. M. Huber India Private Ltd. Chemical From :April 2008 to Feb 2010
- At present I am working with Firmenich aromatic Production india pvt ltd
- I am handling following plants for Instrumentation Department as Inst. Technician

JOB PROFILE :
- Preventive Maintenance
- Breakdown Maintenance
- Routine Fault Diagnosis
- Modification Jobs

JOB EXPERIENCE :
- Review of P&IDs
- Calibration of instruments
- Installation of Instruments
- Study of wiring diagram
- Loop checking
- Interlock checking
- MASTER INSTRUMENTS HANDLED
PRESSURE :- DRUCK ( DPI-610) , BEMAX (MC-2)
TEMPRATURE :- AMKTEK
COMMUNICATORS :- HART-475 , HART-375,
UNIVERSAL CALIBRATRORS :- YOKOGAWA CA-71 & CA-150
DEADWEIGHT TESTERS :- NAGMAN INSTRUMENT.

DCS & PLC EXPOSURE :
- DCS make ABB 800XA
- SIEMENS S7-200,S7-300,S7-400
- ALLEN BRADLEY SLC-500, SLC-5/60
- ALLEN BRADLEY (Control Logix,micro logix,flex logix)

CURRENT LOCATION AND JOB ROLE :-
Currently working with M/s. Firmenich Aromatics Productio (I) Pvt. Ltd. As a Instrumentation Technician. For the Commissioning of new product plant.
At Firmenich, my role is to carried out the mother cable tray work and branch cable tray work related to instruments cable on pipe rack and production buildings by studying the GA. Drawings provided by consultant M/s. Shroff associates. Also to check the cable schedule and freezing of junction boxes location in plant, Checking of various field instruments received at site as per the PIDs, their tech. spects. Calibration and testing of instruments.
Entire plant Instruments are procured as per the NAMUR standard and intrinsically safe suitability considered for Zone 0 and Zone 1.
Commissioning of DCS and PLC panels. Checking of termination details as per the JB schedule. Installation of Remote I/O. panels in plant. (DCS: ABB MX-800).
To supervise the contractor job and to make necessary follow-up for pending jobs along with the supervision of the calibration lab. (Contractor: M/s. Supertech Instrumentation India Pvt. Ltd. )

FIELD INSTRUMENTS :
- Boiler (forbes marshal)
- Control Valves (Forbes Marshal,Mil,dembla,pneucon,samson)
- Valve Positioners (Siemens,Samson,mil,arca)
- On/off valve (virgo,matrix,elomatic,automax)
- Solenoid Valves (rotex,festo,asco)
- Smart Transmitters (Level, Pressure, Flow, Temp.)
- Proximity Switches (tekmens, Inductor balluf, jayshree, kanha)
- PH measurement (polymetron,E&H,mettler Toledo)
- All Switches for various safety purpose
- Magnetic,vortex,(E&H,krone marshal)
- Mass flow meter (E&H,emerson) and Rotameter type flow meters
- Photocell, Cam-Programmer, Encoder, Load –cell
- AC Drive & DC Drive

DOCUMENTATION KNOWLEDGE :-
- Preparation of SOP related to Instrument operation / any system.
- Preparation of calibration format for any instrumentation system.
- Updating Calibration records as ISO-9001 norms..
- Maintain History card for all instruments and controlling system

TRAINING ATTENDED :-
- I have taken training on ISO 9000-2001.
- I have taken training on Safety and Fire.
- I have taken training on ISO 14000.
- I have taken training on First Aid.
- I have taken training on E&H INSTRUMENTS

[Guest-IJT]

Name : Muraleedasan
Email : muraleevtm AT gmail.com

Dear Sir,
I am Muraleedasan.k.Sr Instrument Technician .I has a work experience in Refinarry and oil & gas field of more than 7 years and i came to know that you need experienced person with good skills.
Hereby I am enclosing my resume for your kind perusal. I hope you
will consider my resume and I will do the work with great sense of
responsibility and will make a positive contribution.
Awaiting an early and favorable response from your company. Feel
free to india contact me on my cell no.0091-7891779901,9539757601 if
there is any need pertaining to my profile.

Regards,
Muraleedasan.k

OBJECTIVE :
Objective of my career is to acquire a leading and challenging position with prominent organization that helps in utilizing and improving my skills in the field of Instrumentation.

EDUCATION :
SSLC-Second class-1998-kkmhss vandithavalam-state board of education kerala ITI-WIREMAN-First class 1998-2000-ITI malampuzha-NCVT DIPLOMA- INSTRUMENT TECHNOLOGY-Second class- 2001-2004 -govt polytechnic college palakkad

SUMMARY :
- 7 years experience in process Instrumentation control at Petrochemicals, Thermal Power Station and Oil & Gas exploration fields.
- Experience integrating and programming of Fire & Gas Control Panels and HMI Supervisory.
- Having Hands on Experience as a independent worker in Trouble Shooting, Maintenance, Commissioning, Hook up, Calibration, Modification of loops, and other office management related to Instrumentation.

PROFESSIONAL EXPERIENCE :
1. ORGANIZATION : HINDUSTAN ZINC LIMITED,DARIBA.RAJASTHAN.
PROJECT : LEAD SMELTER COMPLEX
CONTRACTOR : MICROTEC ENGINEERS AND CONTRACTORS
DEPT : Instrumentation & Controls
JOB TITLE : Instrument Technician - Testing & Commissioning
PERIOD : FEB,2011 to till date
ACTIVITIES & RESPONSIBILITIES (TESTING&COMMISSIONING) :
- Calibration, installation & commissioning of smart type Pressure- Transmitters, Gauges & Switches, Flow-Transmitters & Switches , Level transmitters & Gauges, Temperature- Transmitters, Gauges & switches and pH transmitters
- Calibration of transmitters (Rosemount, Yokogawa,Solutioncorp.,E&H,)
- Over hauling Control valves, Solenoid valves, Pneumatic cylinders ,pressure regulators and limit switches
- Some knowledge in Hollysys DCS & Vibration Monitoring Systems
- Knowledge in MOV Calibration and Troubleshooting
From May 2010 to februvary2011

Working for power instrumentation [-keltron controls-Kudankulam Nuclear Power Project (NPCIL) in tamilnadu] dcs instrument technician
Duties include :
- Preparation of Commissioning reports, Testing Procedures and Maintenance principle Programming, Testing and hardware trouble shooting / replace.Service and Maintenance of Process Control Instruments.Module ground fault checking
From may2009 to march 2010

Working for SPIEOIL & GAS [SBM OFFSHORE – TALISMAN ENERGY] Company in Abu Dhabi as MOPU STOR projct Fire & Gas Commissioning Technician
Duties include :
- Pre commissioning and Commissioning MOPU Control PCS-PLC (Control), and F & G Instrumentation.
- Hands on experience in Installation, Loop checking, Calibration and commissioning of gas detectors such as Methane, Methanol, Flame detectors and Nitrogen &O2 Analyzer (Sieger, Simtronics, Detronics& general monitors).
- Involved in checking of HMI Supervisory, retrieval and clearing of Alarm & Range.
- Programming, Testing and hardware trouble shooting / replace.
- Addressable Fire Devise system commissioning
- Simulation testing / functional testing and verifying Cause and Effects.
- Preparation of Commissioning reports, Testing Procedures and Maintenance principle.
- Technical Reporting and Day to day Site Activities / failure reports to the Client and Project Concerned.
From January2009 to April 2009

Working for Petron engineering construction ltd in Barath Oman Refinery LtdatBina (Madhya Pradesh) Assistant engineer in instrumentation
Duties include :
- Calibration of Process Control Instruments
- Service and Maintenance of Process Control Instruments
- Erection of all instruments
- Project team member for the company
- Calibration of flow meters, Temperature, Pressure controllers and all other Instrumentation equipment on site.
- Handling problems on Flow Temperature, Pressure Transmittersand Transducers.
- Having well knowledge in ROSEMOUNT 275, 375 and YOKAGOVABT200 HART Communicators
From may 2008 to January 2009

Working for Petron engineering construction ltd in JERP (Zeeco site) Jamnagar as Assistant Engineer in Instrumentation
Duties include :
- Erection and termination of thermocouples in all Flare Stack
- Erection and termination of ACWL (Air Craft Warning Light) in all Flare Stack
- Loop checking of field instruments, DCS and PLC Panels. Commissioning of flare stack
From November2007 to May 2008

Working for Petron engineering construction ltd in Madras Cements Ltd in Jayanthipuram (A.p) as engineering trainee
Duties include :
- Erection and termination of all instruments.
- Erection of control panel, junction box and Lpbs
- Fixing the Instrument as per P & I and also marking tapping point as per hook up.
- Service and Maintenance of Process Control Instruments
From November 2006 to November 2007

Working for Chemin C&I in Sipat Super Thermal Power Project-NTPC (2x500MW STG) Instrument Lab technician
Duties include :
- Calibration of pressure gauge, pressure switch, temperature switch, temperature gauge and all transmitters
- Operation of Utility Equipments Like Air Compressors, Boiler and Diesel Generator
- Handling problems on Flow Temperature, Pressure Transmittersand
- Calibration of power cylinders and control valve Calibration & Commissioning of Capacitance type level transmitters, Displacement type level transmitters. Loop checking of field instruments, DCS and PLC Panels
From March 2006 to September 2006

Working for Chemin C&I in Faridabad Gas Power Station-NTPC (450MW GT) as Instrument technician (trainee)
Duties include :
- Calibration of different Instruments (Transmitters, RTD,Pressureswitch,Thermo -couple, Control Valve etc.)
- Maintenance work in GTG and related HRSG, STG and Related HRSG at NTPC Plant
- Calibration & Commissioning of Control valves, On/Off valves, Dampers, Electrical actuators.

Working with instrument maintenance development with responsibilities of Calibration, testing, troubleshooting and breakdown and Annual maintenance of instruments in the area boiler, Turbine and Balance of Plant.
From may2004 to march 2006 Working for chemin C&I pvt ltd in IOCL PanipatRefineryExpansion Project Instrument technician trainee
Duties include :
- Calibration of Process Control InstrumentsCalibration of power cylinders and control valveWell knowledge in Proximity, Magnetic, Capacitive, IR, RTD & TC sensors and TransducersTroubleshooting in Control valves and Pneumatic Actuators
- Handling problems in Pressure & Level switches, Controller, Fault finding on Hydraulic, Pneumatic instruments.

[Unregistered]