Furnace Fabrica India Ltd Mumbai : Mechanical Engineer

[Admin]

Furnace Fabrica (India) Ltd.

Company Profile
Furnace Fabrica (India) Limited is a premier EPC company with annual turn over of Rs.200 crores and an employee strength of 250Nos. The company has working arrangement with OUTOTEC, Germany for turnkey execution of Gas Cleaning, Sulphuric Acid and fluid bed calcinations plants apart from industrial plant executions for chemical fertilizer, Petroleum sectors both in India & Overseas.

Experience: 3 - 6 Years
Location: Mumbai

Job Description
Mechanical Engineers with hands on operation experience of minimum 3 years using softwares such as Inventor, PDS, PDMS, Solid Edge etc., for industrial plants with associated piping.

Desired Candidate Profile
Mechanical Engineers with hands on operation experience of minimum 3 years using softwares such as Inventor, PDS, PDMS, Solid Edge etc., for industrial plants with associated piping.

Address:
Furnace Fabrica (India) Ltd
C / 16-3, TTC, MIDC Area,
Thane-Belapur Road,
Pawana Village,
Navi Mumbai - Maharashtra 400705

Email Address: bhonsale@furnacefabrica.com
http://www.furnacefabrica.com

Keywords: Mechanical Engineer, Sr Mechanical Engineer

[Guest-IJT]

Joseph George Manaloor
Mobile Phone : +919552873822
Email : jgmanaloor AT gmail.com

CURRICULUM VITAE

Career Objective
To work as a dynamic and efficient professional to utilize my potential at the summits which would lead to the development and progress of the organization.

Professional Qualification

Sathyabama College of Engineering, Chennai, Tamilnadu
Degree: B.E Mechanical
Year of Pass out: 2009
Percentage of Marks: 61%
University: Sathyabama University, India

Maharashtra Institute Of Technology, Pune, Maharashtra
Qualification: PG Diploma in Piping Engineering with PDMS
Currently pursuing course for the year 2009-2010

St.Joseph Higher Secondary School ,Trivandrum, Kerala
Qualification: 12 th Std
Percentage of Marks: 65%
Board: Kerala State

Christ Nagar School, Trivandrum, Kerala
Qualification: 10 th Std
Percentage of Marks: 72%
Board: SSLC, Kerala State board

Final Year Project
Direct Fuel Injection In Two Stroke Engine
In this project, we redesigned a two stroke engine with “DGI technology” that was found to have a better drivability, more mileage and comparatively less emission of pollutants.

Project at P.G. (Piping)

- Completed a project on a piping system of a chemical prepartion area in a caustic soda complex plant at VITECH CONSULTANCY, MUMBAI
- Conducted a seminar on jacketed pipes
Skills

AutoCAD, PRO-E , PRIMAVERA, PDMS, CAESAR 2

Personal Information

Nationality: Indian
Permanent Address: Manaloor House
T.C.27/1407
Rishimangalam, Thiruvananthapuram (Dist),
Kerala, India
Pin: 695035
Ph: +91 471 2473007
Present Address: Flat No:5,
Gurukripa Apartments,
Ekta Colony,
Kothrud .
Place of birth: Muscat ,Oman
Passport no: G1423260
Birth date: 12 April 1987
Gender: Male
Religion: Christianity
Languages known: English, Malayalam, Hindi,Tamil
Marital Status: Single


Declaration

I do hereby declare that the particulars of information and facts stated here in above are true, correct and complete to the best of my knowledge and belief.

Place :Pune JOSEPH GEORGE MANALOOR

[Guest]

Mahesh Narayan Pillai
Email : mahesha.pillai AT gmail.com
Professional Profile
I am an enthusiastic and outgoing professional, who enjoys being part of, as well as leading, a successful and productive team. I am quick to grasp new ideas and concepts.
Objective
I am now looking to build on my thorough knowledge of technical skills as well as Fabrication in various fields within a suitably challenging role. I am keen to achieve further professional development.
CAREER SUMMARY
2009 Neela Systems Ltd., Wada, Mumbai
Manager – Fabrication - Manufacturing (November 2009 – Till Date)
- Responsible for interpreting product Engineers work instructions and produce high quality work packages (Drawings, specs).
- Participate in reviews of Fabrication Drawings when required.
- Handle purchase requisitions of Materials
- Outsourcing of Machining Components
- Gas Cylinders, Fabrication and Polishing Consumables, Maintenance in Shop Floor
- Attendance Card Maintenance of Workers
- Monitoring Stainless Steel Fabrication of
o Flow plates,
o Control Panel Boxes,
o Drop Boxes,
o Skid frames,
o Pressure Tubes,
o Pendents,
o User Point Drops,
o Tanks and Vessels Accessories,
o Condensor Coils,
o Diaphragm Valves,
o Zero Dead Leg Valves,
o Heat Exchangers,
o Structural Platforms for Tanks, Vessels, Piping etc., components and Equipments used in Pharmaceutical Companies, Bio-pharma Industries, Food and Beverage Companies.
- Monitoring Buffing Department involved in Polishing Of
o Bends,
o Tees,
o Reducers,
o Piping Variables etc.
- Despatches/ Inspection
- Inspected Jobs Packing and Forwarding for Despatch
- Inspection of Vendors for Skid Frames, Dishends of Tanks,Vessels etc. to successfully execute high quality packages.

2007-2009 Cooling And Control Establishment, Al Khobar, Saudi Arabia
Site Engineer (July 2007 - October 2009)
- Detailed Study of Fabrication Drawings
- Preparing Bill Of Materials
- Raising Purchase Requisitions as per Bill Of Materials
- Gas Cylinders Maintenance at Site
- Attendance Card Maintenance of Workers
- Monitoring Carbon Steel Fabrication and Erection of Steel Platforms, Chiller Frames, Chiller Pipings etc.
- Monitoring Copper Piping Fabrication and Erection of Air Handling Units
- Monitoring Fabrication and Erection of Steel Platforms for Chillers
- Monitoring Concrete Foundations
2003-2007 Neela India Pvt. Ltd., Vasai, Mumbai
Installation Engineer (February 2003 - July 2007)
- Detailed Study of Fabrication Drawings
- Preparing Bill Of Materials
- Gas Cylinders Maintenance in Shop Floor
- Attendance Card Maintenance of Workers
- Monitoring Stainless Steel Fabrication of
o Furnitures,
o Control Panel Bodies,
o Skid frames,
o Pressure Tubes,
o Pendents,
o User Point Drops,
o Tanks and Vessels Accessories,
o Condensor Coils,
o Condensor Chambers etc. Components and Equipments used in pharmaceutical companies.
- Getting Ready Jobs Inspected
- Inspected Jobs Packing and Forwarding for Despatch
- Despatches
- Visits to Vendors for Inspection of Furnitures etc.
- Preparing Purchase Requisition
- Follow up with Purchase Department
2002-2003 Ethachem, Churchgate, Mumbai

Sales Executive (January 2002 - January 2003)
- Sales of Chemicals,Powders used in medical drugs
- Visiting Chemical Companies for Receipt of Orders
- Sending Enquiry Letters to Chemical Companies
- Quotation Preparation
1999-2001 Famous Engineers, Kandivali, Mumbai

Fabrication Supervisor (November 1999 - December 2001)
- Detailed Study of Fabrication Drawings
- Preparing Bill of Materials
- Argon Welding Machine Maintenance on Shop Floor
- Hands On Experience of Aluminium Fabrication of components used in Shipyards such as Aluminium Booms, Aluminium Kit Lockers etc.
1999 Espee Engineers, Mira Road, Mumbai
Draughtsman (October 1999 - October 1999)
- Prepare Manual Drawings of construction machinery such as Concrete Mixers, Mixing Vessels etc.
EDUCATION AND TECHNICAL QUALIFICATIONS
1994-1999 Diploma in Fabrication Technology And Erection Engineering from Fr. Agnel Polytechnic, Vashi, New Mumbai pass with 60%
1993-1994 HSC in Science Stream from R.D. National College, Bandra, Mumbai pass with 37%
1991 SSC from St. Theresa’s High School, Bandra, Mumbai pass with 76%
KEY I.T. SKILLS
- Microsoft Word
- Microsoft Excel
- Microsoft Power Point
- Autocad - 2000
INTERESTS & ACTIVITIES
- Playing Badminton
- Playing Chess
- Surfing the Net
- Watching Cricket