Precision storage vessels Kalpadi, Kanyakumari : Mechanical Engineer

[Admin]

PRECISION STORAGE VESSELS PVT LTD, KALPADI , KALPADI P.O. KANYAKUMARI DISTRICT

Company Profile
Upcoming Manufacturing unit in Kalpadi, Near Nagercoil, in Kanyakumari district , specializing in manufacture of LPG tanks ( above 500 litres) , heat exchangers, hot water metal storage tanks, air separators , Fire tube boilers, and all kinds of storage vessels .Concentrating more on the export market .

Experience: 3 - 6 Years
Location: Tamil Nadu

Job Description
Person should be capable of independently handing the design process . He should have the knowledge of designing pressure vessels , storage tanks , LPG tanks etc using COADE or any other competent softwares. Directly reporting to the MD .Should implement technically efficient and commercially competent manufacturing Process. Should be capable of leading the production team .

Desired Candidate Profile
Mechanical Engineer , with atleast five years working experience.
The candidate should have experience in storage tanks, manufacturing factories, boiler factories ,Pressure vessel manufacturing units , Heavy structural fabrication.

Knowledge of Heat exchanger manufacture, LPG tanks manufacture,system design,Basic Engineering, sizing calculations,Review Engineering, Detail Engg, Preparation project,Feasibility Report/ DPR, Technical Specification,Stress analysis will be an added advantage.

Conversant with sheet metal equipment , fabrication and should have some experience in sheet metal industry.

Email Address: smanuel@eim.ae

Keywords: Mechanical engineer, design engineer, production manager, works manager, FACTORY MANAGER, engineering, B.E. MECHANICAL , BE MECHANICAL, ENGINEER

[Guest-IJT]

Area of expertise : Chassis design(Brakes, Axle & Differential, Gear Design,Machine tool)

Qualification : B.E. Mechanical

Total 6.5 years of Design & Development experience in automotive design technologies mainly Brakes, Axle & Differential, Gear Design,Machine tool etc.
Experience Summary:

* Expertise in CATIA V5 , IDEAS R12 ,PRO-E & in 2D/ 3D, Assembly,Drafting and FEA
* Gear Design calculations for Spur, Helical, Bevel Gears
* Design calculations for shaft & Bearing selection
* 3D modeling of complex transmission housings, including machine tool castings
* Axle design & packaging for various automotive applications
* Define and Apply GD&T for both assemblies and dependent components
* Model simple , complex parts and assemblies as well as dependent components
* 3d modeling of complex differential casings, Banjo housing & carrier housing, Brake system design calculations, packaging & layout for 4 wheeler & 2 wheeler,3D modeling,assembly,drawings with GD&T for Brake system caliper,master cylinder,reservoirs etc.
* Testing & field issue resolution of disc & drum brakes
* DFMEA for Brake system
* 3D Routing of brake hose & ABS Sensor Cable on passenger car
* Design support to Manufacturing, assembly & proto shop for sheet metal brackets,Tubing of brake system,Castings,forgings,Machining.
* Parametric modeling and 2D detailing with GD&T of Castings and machining
* Knowledge in general materials, manufacturing processes and related tolerances
* Geometric Tolerance Stack-ups

Career History:

Mahindra Engg. Services Sr.Design Engineer
(Onsite Engineer for 6months at Honda R&D Americas Inc, Ohio, U.S.A.)
Dana India Technical Center Limited Project Engineer
Bosch Chassis Systems India Ltd. Sr. Engineer
The Premier Automobiles Ltd. Design Executive
Vakkanad Engg. Ltd., Pune Trainee Engineer


Personal/General Details
Age : 29
Sex : Male
Marital Status : Married
Contact No : 9922596361
Passport details : G8352085 issued from Pune
Issue date – 17/04/2008 Expiry date – 16/04/2018
Visa : Holding Business visa B1 for USA (10 years multiple entries)
Issue date - 6May 2008 Expiry date – 1may 2018
Residential Address:
Lotus Plus,Flat 21,Vivek nagar,Akurdi ,PUNE 411035

CAD Skills
* CATIA V5 ,IDEAS 12 , PRO-ENGINEER , AUTOCAD 2000
* SAP ERP
* ENOVIA
OTHER SKILLS:
GD&T & Tolerance stack up
DFEMA


Experience:
Company : Mahindra Engg. Services (from 22Apr ’08 till date)s

PROJECT 1:
onsite at Honda R&D Americas Inc, U.S.A.) for 6months
offshore Engineer for 6 months in HONDA dept. at MES
Domain : Brake System(Passanger car Accord,Civic,Odyssey)

Project Description:
LAYOUTING:
Hose layout and ABS sensor cable lay outing considering Suspension Kinematics positions of 1G,REBOUND,OVERBUMP and steering strokes (left/right)for each positions.
position of ABS sensor probe mounting on knuckle, Suspension components like Trailing Arm for rear suspension & Front suspension.
This Routing to be done using COBLA software.This software uses ABAQUS solver for calculating the final shape of the hose and cable ,it takes into consideration all the material properties.To create 2D drgs for ABS Sensor cable and Hose.

BRAKE PIPE ROUTING:
Routing from ABS modulator located in the engine compartment to CALIPERS.
Naming convention used in Honda

2D drawings for all pipes showing coordinates of each point in table form.
Check feasibility, fouling with various susp. Components and stroke sensors.
BRACKET DESIGN:
Structural analysis of newly designed brackets with CATIA GENERATIVE STRUCTURAL ASSEMBLY ANALYSIS, GENERATIVE STRUCTURAL PART ANALYSIS.
Responsible for final approval of prototype of sheet metal brackets and release of production drgs. for the same.
* 3D modeling(surface design) and FEA for ABS Modulator brackets.
* 3D modeling of Hose brackets on damper,
* Updation of Enovia DPM as per design release levels for vehicle projects Accord,Civic,Odyssey,Pilot in Honda.
* Blank development drawing for water jet cutting
* Unfolded drg of bracket with bending lines etc. Use of Generative sheet metal design workbench.
* Parking brake bracket for mounting the TENSION CABLE, this bracket is bolted on rear knuckle and it takes the pull load exerted during parking action.3D modeling,FEA for the bracket.
* 3D modeling of Disc Rotor (drum in hat),FEA of rotor.2D drgs.
* 2D drgs for ABS sensor cable,Hose,Brake pipes.
* Calculation for braking torque,volume calculations for brake fluid,Pedal stroke.
* Preparing DFMEA sheets for master cylinder,caliper,brake pads etc.

CURRENT PROJECT :
CLIENT : MAHINDRA CONSTRUCTION EQUPMENT
Description :
3D Hose Routing and Hydraulic Tubing on CATIA v5 for Complete Backhoe Loader Machine (Earthmoving Eqpt.)
Release of Piping prototype ,Coordinating with prototype shop for field problems and changing the design accordingly.
___________________________________________________________________________

Experience : Dana India Technical Center Limited
Duration : 10months (23Aug’07 to 21Apr’08)
Designation : Project Engineer
Domain : Axle & Differential

Presently working with Dana India Technical Center Limited, Pune as Project Engineer in Torque Traction Technology(Light Axle) Group. Proficiency in working on CAD Softwares like CATIAV5 & I-DEAS,PROE.
Dana Corporation is a leading world wide automobile supplier in areas of Axles, Propeller shafts, Universal joints, Power-Lock limited-slip differential, structural, sealing, and thermal-management products for cars, commercial vehicles, light & heavy duty trucks ,Trailers .
Dana is renowned for their SPICER brand driveshafts,Universal joints. Some of the major customers include FORD,GM,BMW,CHRYSLER,JOHN-DEERE,VOLVO, Dodge,JEEP.,TATA MOTORS,AHOK LEYLAND,MAHINDRA.


Responsibilities: Study, Time estimation, Planning and Completion of Engineering work orders which are received through Team center(PLM).
Interaction with US counterparts for clarifications.
3D Axle assembly ,3D modeling for various sheet metal brackets,fogings,castings,kingpin yokes,knuckles,suspension aggregates, carrier castings,Diff case, Gears & 2D layout drgs,
Differential Assembly drawings,drawings for casting ,forgings,Machining drawings as per Dana design manuals, Calculation of Banjo length, Axle shaft lengths from customer vehicle layout, axle shaft Strength, Section modulus, Bending Moment calculations,
Project 1: FORD Rear drive Axle-banjo casing
Platform : CATIA V5
Duration : 400 hrs
Team size : Two

Project 2: TATA MOTORS SUMO GRANDE for Rear drive Axle-banjo casing Axle
Platform : CATIA V5
Duration : 400 hrs. each
Team size : Two

Project 3: FORD Front drive Axle Project (components to complete axle assembly from scratch). Salisbury and banjo axle casing.
Platform : CATIA V5
Duration : 400 Hrs


Experience : Bosch Chassis Systems India Ltd
Duration : 1.8 yrs. (19Nov’05 to 22Aug’07)
Designation : Design Engineer
Domain : Hydraulic Disc Brake Design (CATIA V5)

Previously working as a Senior Engineer(Design) on CATIA-V5 from Nov’05 to Aug ‘07 with Bosch Chassis Systems India Ltd.(formerly Kalyani Brakes Ltd.) Pune. Bosch Chassis Systems is engaged in business of Hydraulic brakes,dics brakes for motorcycles, Tractor Ramp brakes, deals with the Design and development of the Brake System of Automobiles (Four wheelers as well as Two wheelers).The Spectrum of Customers includes Indian as well as overseas such as General MOTORS,MARUTI,TATA MOTORS, HEROHONDA, ASHOK LEYLAND, BAJAJUTO,YAMAHA,HONDA,KINETIC,LML,MAHINDRA,BAJAJ TEMPO,FORD ,HMT .

Job Profile:

*worked in DISC BRAKE SYSTEM DEPT. My job profile involves Study of customer data sheets, proposal drawings, offering comments on their suitability and mutually deciding the acceptable parameters, Cost reduction inputs, vehicle dynamics calculations, Calculations for braking torque, Master cylinder Pressure & Stroke calculations, Pedal and lever force calculations,Tolernce stack ups etc.
*Preparing DFMEA sheets for caliper,master cylinders.
*Designing ,3d modeling of the Brake system components such as Brake-Calipers, Master cylinder,Brakefluid-Reservoirs,BrakeLevers etc. using CATIA V5
*Good exposure to modeling of aluminum die casting(pressure/gravity)
*Exposure to modeling of plastic parts.
*Exposure to Design Validation through Testing. Conducted & coordinated variety of brake performance tests like Hot Endurance test, Piston seal Rollback test, Inertia Dynamometer testing for brake pad, High-low pressure, Caliper Burst test, Ineffective stroke etc. and studing,coordinating their reports ,Prototypes fitment on vehicles, assessing their performance from test rigs and field reports.
Exposure to standards,
FMVSS Standard No. 122 for motorcycles, FMVSS 135 Passenger car brake systems, FMVSS 105 Hydraulic Brake Systems
SAE J 866 std for friction material coeff identification
SAE J 661 Brake lining quality test procedure
SAE J 1153 Hyd.master cylinder for motor vehicles

responsibilities/achievements include:
1)WORKED ON MARUTI ALTO ,MAHINDRA SCORPIO DISC BRAKE PROJECTS.
2)WORKED ON HERO-HONDA,YAMAHA LEVER DESIGN,MASTER CYLINDER DEVELOPMENT.
3)WORKED ON PIAGGIO 3WHEELER DISC BRAKE SYSTEM.
4)WORKED ON TROUBLESHOOTING HONDA UNICORN BRAKE NOISE PROBLEM.
5)125 CC BIKE DISC BRAKE SYSTEM WITH SINGLE PISTON FLOATING CALIPER DEVELOPMENT
_____________________________________________________________________________________


EXPERIENCE : The Premier Automobiles Ltd.
Duration : 1year (21Oct’04 to 21Oct’05)
Designation : Design Executive (CATIA V5)
Domain : Gear Design, Machine Tool

Previously working as a Design Executive for 1year on CATIA V5 in the Gear Cutting Machines-Design Dept. at The Premier Automobiles Ltd.(Machine Tool Division),Pune.
Brief information about company:
The Premier Automobiles Ltd.(PAL) is a pioneer manufacturer of cars like 118NE,Premier Padmini,Fiat Uno,Peugeot309 in the early days. PAL started Machine Tool Division at Chinchwad,Pune in year1941 which pioneered machine tool era in India. PAL is the First to manufacture CNC Vertical Turning machines, Machining Centre manufacturing , 3&6 axes CNC Gear Hobbers in India..
PAL is having Technical collaborations with reputed global leaders as below:
* CNC GEAR CUTTING MACHINES –Pfauter - Germany, SPM Studio - Italy.
* CNC MACHINING CENTERS- Hitachi Seiki-Japan , Dörries Scharmann-Germany, Schiess-Germany, Scottish Machine Tools-U.K., Stojimport of Czechoslovakia.


JOB-profile
* Design Calculations of Shaft,Spur, Helical,Worm Gears,Gear Transmission as per AGMA,DIN,
* Selection calculation of Ballscrews,LM guideways,Bearings.
* 3D Modeling of Gear Hobbing machine Castings for machine Bed,Columns,work tables,Fixtures,Slides etc. on ‘CATIA V5’.
* 3D Assembly of complte Gear Hobbing machine on CATIA-V5’.
* Creation of Detailed Engineering drawings for various production activities, fabrication items,structures,assembly drawings ,machining drgs with GD&T etc. on & ‘CATIA-V5’ ‘AutoCAD’ , ’PRO-E’
* Exposure to SAP for material planning & resource activities.
PROJECTS:
* Design & selection of L.M. Guide ways to 6axes CNC Gear Hobbing Machine-PE150(Customer-Hindustan Motors) ,with LM Guide ways for all 3linear axes and a high speed hob head. This machine PE150 was having V-guide ways in the earlier design
* Worked on Project for GTC200(Customer-TATA Motors)machine compactisation to reduce floor space. My task was to make 3Dmodel of bed,columns,Conveyors,& 3D assembly of complete machine existing ,I had made the machine compact by reducing 700mm length which resulted in saving of material cost,& floor space. Lowered height of work table for easy loading of work piece.
* 3Axis CNC Gear Hobbing Machine-P254, P634(Customer-Hindustan Aeronautics,Ashok Leyland.) Convering drawings into 3D models ,3D Modeling & 3D Assembly of various machine castings.Imrovement in design of castings, Reliability & proper functioning of machine, suggest compact design, modification in design by eliminating present drawbacks.
___________________________________________________________________

EXPERIENCE : Vakkanad Engg. Ltd.,Pune
Duration : 1.2 yrs. (May’03 to July’04)
Designation : CAD Engineer.
Job Profile : Trainee Engineer

Previously working as Design Engineer on IDEAS at Vakkanad Engg Ltd.,Pune for 1year.( A Material Handling Eqpt. Mfg. Company involved in the production of Slat conveyors, Belt Conveyors, Hydraulic Stackers, Hydraulic Scissor lift, Bucket Elevators)
JOB-PROFILE:
* 3D Part Modeling of stacker, scissor lift ,conveyor structure, its various parts.
* 3Dpart assembly of hydraulic cylinder , stacker gearbox , Conveyor ,Scissor Lift ,its various elements on IDEAS.
* Design & Development of conveyor layout,structure,frame,Design of shaft, pulleys,rollers,tranjems etc.Preparing detailed Engg. Drawings. On IDEAS/AutoCAD

PROJECTS HANDELED
* Hydraulic operated scissor lift for TATA Motors(TAL) ,Chinchwad,Pune.
* Hydraulic operated double acting cylinder type scissor lift for Cipla Ltd., Mumbai.
* Development of 20 Meters length inclined Slat Conveyor for Thermax WWS Ltd.,Pune.
* Development of Inclined Belt Conveyor for CONCAST Castings, Dubai.(U.A.E).
* Development of Portable Belt Conveyor for Automotive Stampings & Assemblies
* Hydraulic operated double cylinder ,automatic stacker for Hindustan Latex Ltd.

Nishant. R .Mundhare

[Guest]

RESUME
K.DINESH
dinuwin2010 AT gmail.com

CAREER OBJECTIVE :
Dynamic and result oriented professional seeking for a Senior position and to work with a progressive and forward thinking company where I can use my skills and knowledge obtained in 3 years of experience in Commercial, Factories & Industrial Building project.
QUALIFICATION SUMMARY :
Bachelor of Engineering (B.E)/ Degree in Mechanical Engineering in (2004-2008), affiliated to The Sudharsan Engineering College, Under Anna University, Pudukkottai, Tamilnadu (India), Aggregate Percentage in B.E is 71.48%.
PREVIOUS EMPLOYEE :
Duration : Feb 2009 to May 2011.
Organization : Awazel (Arabian Waterproofing Industry) Pvt Ltd, Riyadh,Kingdom of Saudi Arabia.
Designation : Production Engineer.
Reporting to : Production Manager
JOB PROFILE :
- Preparing and implementing action plans effectively to maximize overall equipment efficiency of production machines.
- Distribution of work load to operators in order to achieve daily production target.
- Planning day to day production to achieve maximum production.
- Supervising hourly production.
- Arranging, repairing and maintaining tools.
- Utilization of manpower accurately.
- Troubleshooting and solving technical problems.
- Organizing daily work at shop floor.
- Handling skilled manpower and administration of shop floor.
- Simultaneously working towards productivity and quality improvement through Kaizen activities.
- Record preparation of tool history coordinating with purchase, planning, stores, tool room.
- Preserving discipline according to safety rules.
- Implementation of safety audits, 5'S.
- Organizing quality circles in department.
- Encouraging activities for new product development.
- Lab vantage user.
- Examine the needs for training and provide on the job training to departmental personnel.
- Preparing management information reports to ensure progress in the department.
- Material Procurement as per the management requirement
- Preparation of the indent of material & consumables and co-ordination approval from management as applicable.
- Manpower allocation of Day-today activities.
- Supervision of production at industry to ensure good quality of material and workmanship.
PREVIOUS EMPLOYEE :
Duration : June 2008 to Feb 2009
Organization : Dhanuja Steel Industry Pvt Ltd, Trichy , INDIA
Designation : Project Engineer
Reporting to : General Manager
JOB PROFILE :
- Report directly to General Manager.
- Responsible for scheduling, financial, and technical requirements in compliance with industry, company and regulatory standards.
- Managed team of 4 engineering person, including hiring consultants and employees.
- Monitored and developed engineering budgets for product line.
- Provide advise on integration of all product line technical aspects including software, hardware, electrical and mechanical disciplines.
- Act as liaise with Design Director, Program Manager, and Production Manager to transition product from prototype, design through the completion of project.
- Assisted in development and execution of construction and engineering projects with emphasis on integrated design and construction of building system.
- Aided in scheduling of draftspersons, engineering aides, and other engineers.
LIST OF PROJECT INVOLVED :
- M/s. Tata Blue Scope Industry Pvt Ltd, Pune
- M/s. Mahindra Tyres Pvt Ltd, Pune.
- M/s. Apolo Tyres Pvt Ltd, Chennai.
- M/s. Geeco Pvt Ltd, Trichy.
PROJECTS :
Project Name : Enhancing Overall Equipment Effectiveness Level (OEE) and Reducing Rework In Deuma Panel Welding Machine.
Place : Bharath Heavy Electricals Limited(BHEL), Trichy.
Description : This project deals with the Investigation of various parameters affecting the Equipment Effectiveness Level, to reduce the rework in water wall panels in deuma welding machine.
Mini Project : Pneumatic Multipurpose Grinder.
COMPUTER KNOWLEDGE :
- AutoCAD, (Version 2007).
- Pro e,(Version 2007)
- Excellent with MS Word, Excel and Power Point 2011
MY STRENGTHS :
- Very good learner, self motivated with positive attitude.
- Strong communication and interpersonal skill.
- Result oriented, strong will power and better planning and coordination.
- Enthusiasm to learn new concepts/practices.
- Easily adaptable nature.
LANGUAGES :
- Tamil
- Hindi
- English
- Arabi
EXTRA CURRICULAR ACTIVITIES :
- Volley ball
- Cricket.
SALARY DRAWN : 2500 Saudi Riyal /month - plus Accommodation & Transportation
SALARY EXPECTED:
Negotiable

[Guest]

RESUME

VIGNESHWARAR.A
Mail : azhagu_vignesh AT yahoo.co.in
Objective :
To work in a challenging atmosphere, Where I can contribute to the growth of my
Organization and Improve my knowledge in this field.
ACADAMIC Qualification :
High School (10th)
St. Francis Xavier Hr.Sec Scool,Mankuzhy
Percentage- 87%,
Year passing -2000.
Higher Secondary (+2)
St. Francis Xavier Hr.Sec Scool,Mankuzhy
Percentage- 86.5% ,
Year passing –2002.
Technical Qualification :
Diploma in Mechanical Engg
Govt.Polytechnic Collage,Nagercoil
First Class .
Percentage - 76.5 %, Year of Passing – April 2004
Professional Experience :

UNITED ENTERPRISES , Bangalore-15
Worked 3 months QC & Supervisor in press shop.
M/s Bharat Heavy Electricals Limited, Trichy-620 014.
Technician Apprentice Training.
Period- (09th Oct 2004 to 8th Oct 2005 )
M/s Diesel Machinery Works,Perundurai -Erode
Period : 19 th Dec 2005 To 15th Oct 2009
Department : Quality Assurance
Desigination : Development Inspector
M/s Veesons Energy Systems Pvt LTD Thuvakudy, Trichy-620 015.
Department : Quality Control
Desigination : Inspector
Period : 24 th Feb 2010 To Till now
Nature Of Work
All structural columns and foundation material inspection.
Deaerator Storage Tanks,Deaerator Tanks,Silencers,sevice oil tanks,Vrious type of Ductings,Hppers Inspection.
Managing the TPI inspectors like LRA(LLOYDS REGISTER ASIA)TUV.
Self Documentation work & FIR(Final Inspection Report).
Knowledge on computer :
MS Office. ( word, excel,power point)