DMRC Career 2011 Delhi Metro Rail Corporation : Executive Engineer Trainee

[Admin]

DMRC Career 2011 Delhi Metro Rail Corporation : Executive Engineer Trainee

Delhi Metro Rail Corporation (DMRC)
ADVT NO: DMRC / PERS / 22 / HR / 2011 (16)

Name of the Organization : Delhi Metro Rail Corporation (DMRC)

Company Address :
Delhi Metro Rail Corporation Ltd.
Metro Bhawan
Fire Brigade Lane, Barakhamba Road,
New Delhi - 110001, India
Name of the Post : Executive Engineer Trainee

No of the Post : 20 posts
Civil Engineers : 07 posts
Electrical Engineers : 06 posts
Signal/ Telecom Engineers : 06 posts
Architect Engineers : 01 posts

Age Limit : Not less than 21 years and not more than 28 years as on 01/01/11

Qualification :
A minimum of 70% marks in B.Tech/B.E. Examination (Civil, Electrical and Electronics) and a minimum of 60% marks in B.Arch, from AICTE recognized Institutes/Universities.

Pay scale : Rs.20600-46500/

Application fees :
non-refundable crossed Demand Draft for Rs.300/- for General & OBC candidates and for Rs.50/- for SC/ST candidates (for processing cost only) along with application form drawn in favour of DELHI METRO RAIL CORPORATION LIMITED, payable at New Delhi

How to Apply :
The duly filled in application form should be sent in an envelope superscribing on the cover prominently - Name of Post/Category (Genl/OBC/SC/ST)/Percentage of marks in degree level examination) to reach the following address latest by 25/04/2011 by ordinary post :
DMRC Limited
Post Bag No. 9
Lodhi Road Post Office, Lodhi road
New Delhi – 110003

Last Date of Application Receipt : 25 /04/11

Detailed Advertisement : http://www.emodeapply.com/dmrc11/

Application form Download : http://www.emodeapply.com/dmrc11/

Company profile :
Delhi Metro is a world-class metro. To ensure reliability and safety in train operations, it is equipped with the most modern communication and train control system. It has state-of-art air-conditioned coaches. Ticketing and passenger control are through Automatic Fare Collection System, which is introduced in the country for the first time.

***************
General Instructions :
This is information on Delhi Metro Rail Corporation (DMRC) Recruitment 2011 / Vacancies / Careers / to be filled, for the post of Executive Engineer Trainee.
If you are looking for jobs / career in Delhi Metro Rail Corporation (DMRC), you have to apply by downloading the application form given in the link above.
Full details of recruitment in Delhi Metro Rail Corporation (DMRC) can be had from the detailed advertisement link as given above.
You can also visit the careers page of Delhi Metro Rail Corporation (DMRC) to know more about the selection procedure, latest results, other jobs vacancy requirements etc.
Please ensure that you apply before the last date as all government recruitment procedures adhere a strict policy on this.
***************

[Guest-IJT]

sujit kumar jena
sujitjenna AT gmail.com
B.E (MECHANICAL) GRADUATE ENGINEER TRAINEE

Curriculum Vitae
Sujit Kumar Jena
Objective : To work in an environment that provides great learning oppurtunities and hone my skills and knowledge in various areas of the industry, thereby constantly growing and adding value to the organisation.

Educational Details :
Degree/Exam Year Institute/School Marks
B.E (Mechanical,VTU) 2007-2011 M.S.Ramaiah Institute of Technology,Bangalore CGPA-9.32/10
Class XII (CBSE) 2007 Kendriya Vidyalaya AFS Yelahanka,Bangalore 93.8%
Class X (CBSE) 2005 Kendriya Vidyalaya AFS Yelahanka,Bangalore 89.8%
Experience :
- One month internship at Hindustan Aeronautical Limited (July 2009-August 2009)
The internship consisted of understanding various aspects of plant maintenance,TPM,Conditional Monitoring,Non- conventionbal machining,shot peening and Blast cleaning machine.
- One month internship at L&T ECC division [July,2010-August 2010]
It basically dealt with getting an insight into the MEP activities and also understanding fundamentals of HVAC industry and energy efficiency of the plant.
Academic Project :
Title : Vibrational analysis of industrial shaft using Campbell diagram[October 2010-present]
The project focuses on the analysis of a power turbine shaft rotating at high speed resulting in vibrations.
ANSYS is used to draw the 3-D diagram of the shaft which is subjected to free and forced vibration.The natural frequency of the system is generated and the mode shape values are found. The Campbell diagram is drawn to check for the safe limits of the shaft and then accordingly the design parameters are changed to arrive at the safe limit values of the shaft.

Elective Courses Taken :
- Experimental Stress Analysis
- Rapid prototyping
- Fracture mechanics
- Theory of elasticity
- Control Engineering
- Machine Tool Design
- Automation in Manufacturing
Software Skills :
- Application Software : Solid edge,Ansys
- Programming Language : C, C++
- Operating Systems : Windows XP/Vista/7
Achievements :
- Ranked 12th in Bangalore region in CBSE Class XII Boards.
- Amongst the top 10 students of Mechanical branch.
- Karate Black belt holder.
- Rajya Puraskar awardee in scouts and guides.
- Zonal winner of the 16th Annual Parliamentary Debate competition held at Hyderabad.
- Played volleyball at the regional level.
- An active volunteer of the college fests and blood donation programs.
Personal Information :
Date of Birth : 3rd November,1989
Email Id : sujitjenna AT gmail.com
Languages known : English,Hindi,Oriya

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4092218
Date & Time : 5th May 2011 6:41 PM (UTC)
IP Address : 115.184.3.202
Browser Info : Mozilla/5.0 (Windows NT 6.0) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.60 Safari/534.24
Predicted Country : India

[Guest]

Arpit Joshi
Email : arpitsudhirjoshi AT hotmaill.com
EDUCATION
Passed in 2005 SSC –ICSE Board 65% First Class
Passed in 2007 HSC – ISCE Board 69% First Class
2007-2011 Bharati Vidyapeeth College of Engineering (Mumbai University)
BE-INFORMATION TECHNOLOGY (I.T)
Semester Marks
BE Semester 1 51.63%
BE Semester 2 53.75%
BE Semester 3 50.94%
BE Semester 4 52.00%
BE Semester 5 59.33%
BE Semester 6 60.67%
BE Semester 7 67.35%
Aggregate up to 7th semester 56.55%
SKILLS AND PROFICIENCIES
________________________________________
C++, Java, Net Beans 6.9, Wireless Toolkit.
PROJECTS AND TRAINING
________________________________________
- IT Helpdesk Management System for Ultratech Cement Ltd. (Outhouse project)
- Have undergone Summer training in ONGC for one month.
Extra-Curricular Activities
________________________________________
- Secured Second place in College festival Robotics Competition.
- Participated and secured Second place in the National Level Technical Paper Presentation 2010.
- Participated and secured Third place in the National Level Technical Paper Presentation 2011.
Other Interests
- Reading fiction.
- LAN Gaming.
- Playing Football

[Guest]

RESUME
TUSAR KUMAR SAHU
E-mail – smartytusar AT yahoo.co.in,smartytusar82 AT rediffmail.com
OBJECTIVE :
I will always endeavor to utilize my knowledge of science technology and management for the service of our country. In all circumstances i shall try to uphold the dignity of the individual and the integrity of the profession.
EDUCATIONAL QUALIFICATION :
Exam Passed Year Board/Univ
of
Passing School/College % of Marks Place
10th (H.S.C) 1997 B.O.S.E
Orissa P.S. High School 64% Bargaon SNG(Orissa)
10+2(C.H.S.E) 1999 C.H.S.E
Orissa P.S. College 50% Bargaon SNG(Orissa)
B.E. (Electronic & Telecommunication) 2003 B.P.U.T.
Roukela P.I.E.T. 61% Rourkela Orissa.
SUMMER JOBS :
In 2002 Rourkela Steel Plant.
Industrial Training in HOT STRIP MILL(RSP Rourkela)
In 2003 at BSNL Rourkela
In C- DOT Department (BSNL Rourkela)
PROJECT :
Two way communication system in Plants.
SEMINAR :
On E – 10B Exchange
5 – ESS Exchange
C – DOT Exchange.

COMPUTER EXPERIENCE :
Working experience in MS-office, MS WINDOWS platforms,Excel. Programming Language know as C, FORTRAN.
JOB EXPERIENCE : IN MECHANICAL FIELD
(I) 02 years work experience in M/S J.G Industries, Rourkela, Orissa
Designation-Asst.Engineer
Work details-Fabrication of structural items.
(II) 04 years work experience in G.A.C.L unit-MICCO
Designation-Site Engineer
Work details-(a) Fabrication, Erection & Commissioning of Blast Furnace Gas holder 50,000 Cum (Dry seal type) at Bhushan steel & Strip Limited, Jharsuguda, Orissa
(b)(i)Fabrication & Erection of structures like Junction Houses of Blast furnace at Bhushan Steel Limited, Anugul, Orissa
(ii) Fabrication, Erection & Commissioning of Blast Furnace Gas holder
100000 Cum (Dry seal type)at Bhushan steel limited ,Anugul,Orissa
(iii) Fabrication, Erection & Commissioning of L.D Gas holder
80,000 Cum (Dry seal type) of SMS-II, Vizag steel plant,Visakhapatnam,Andhrapradesh
LANGUAGES KNOWN : English, Hindi Oriya & Bengali.
ASSETS : Pleasant personality with good communication
skills reading news papers, listening music.

[Guest]

E-Mail ID : 0124pramod AT gmail.com
PRAMOD FARKASE
Carrier objective :
Looking for an excellent opportunity to work as mechanical engineer with my excellent skills and mechanical engineering background that will help me to give better service to your company
Education Qualification :
- B.E.(Mechanical Engineering) Bhopal - 67% (2011)
- I have done my 12th std. from. MP Board Bhopal - 66.67% (2007)
- I have done my 10th std. from. MP Board Bhopal - 72.80. % (2005)
Technical skills :

Languages - Basics of C, C++
Application - Ms Office
Software - Catia (Design)
Major Training :
BHEL BHOPAL - one month
RAYMOND PVT. LTD. BHOPAL -15 days
Extra Curriculum Activities :
- Member of student community in college.
- Participated in ‘GYANODAYA PROJECT.
- Taken part in various cultural activities viz. science exhibition, essay writing.
Academic Project :
- Major project on DESIGN OF UPPER TRIM PINEL IN CATIA SOFTWARE.
- Minor project on GENERATION OF ELECRICITY BY BIO GAS IN FOUR STROKE ENGINE.

[Guest]

BIO DATA
Name : MASTER ABHISHEK KUMAR
Educational Qualification : 10th from Orissa State Educational Board, Orissa.
: I.A. from Intermediate Council, Orissa.
Technical Qualification : Diploma in Civil from PUNJAB TECHNICAL UNIVERSITY, PUNJAB.
: ITI in Electrical from Orissa.
Experience ;: I have gained knowledge of Pile Foundation, Pile cap, Pair casting in a single lift up to 2.4 Mtr, at 36+000 & 48+000 Interchange, Embankment, Sub grade, GSB, Filter layer, Drainage layer, DLC & PQC laying, Kerb casting, Shoulder drain, chute drain, Toe drain, slope dressing, Turffing, Rip Rap work near PUP & VUP, Track coat, Mastic, DBM, BC etc. of YEP during the period of leave from time to time.

[Guest]

RESUME
J.NANDHINI DEVI
Jndevi.14 AT gmail.com

CARRIER OBJECTIVE :
Seeking an opportunity for professional growth and increasing responsibilities, to work intellectually stimulating environment developing innovative skills and work dynamically towards the growth of the company.
ACADEMIC PROFILE :
Course Institution Board/ University Year of Completion % of
Marks
B.E
(Electronics and Communication Engineering)
GGR College Of Engineering, Vellore. Anna University
2011 70% upto
VII sem

HSC Vijayanta Hr.Sec.School,Avadi
Chennai.
State board
2007
67.2%
SSLC Govt. Girls. Hr. Sec. School,
Thottapalayam, Vellore.
State Board
2005
77.2%
AREA OF INTEREST :
- Data Structure Concept
- Digital Communication
- Microprocessor
SOFTWARE EXPOSURE :
Operating Systems : Windows xp/ Vista/ Windows7.
Software : MS office
CO-CURRICULLAR ACTIVITIES :
- Presented a paper on “4G TECHNOLOGY”
- I have presented a paper on “WIRELESS TECHNOLOGY” in college level.
- Participated in debate and got second prize in college level.

- I have undergone a inplant training in “B.S.N.L” under the topics of
1. Transmisson equipments
2. Switching equipments and external plants
3. GSM and broadband service
ACADEMIC PROJECTS :
- I have done a project work on “SHADOW ALARAM” during my pre final year.
This project will be very useful to the organisation which is used to several application in a single editor. companies can utilise this project to make the efficient and effective application maintenance.

- I have done a project work on “MEDICAL IMAGE SEGMENTATION USING ACTIVE CONTOUR MODEL” during my final semester. This project is to aid in locating abnormalities in digital mammograms using Active Contour Method of Medical Image Segmentation.
STRENGTHS :
- Adaptable person
- Interested in Team Work
- Willingness to learn new skills
- Good communication skills

[Guest]

SHRADDHA VIKRAM KATHEETH
EDUCATIONAL QUALIFICATION

- Passed S.S.C with distinction from Maharashtra Board in March-2004
- Passed H.S.C with distinction from Maharashtra Board in Feb-2006
- Student BE(IT) 2011 final year
COMPUTER KNOWLEDGE
- LANGUAGE : C, C++, Java, MySQL, HTML
- OPERATING SYSTEM : Linux, Microsoft Windows (Vista)
SEMINAR AND PROJECTS
- PROJECT :
1) Electronic tongue :- Electronic Tongue is used for recognition and classification of liquid and solid media, quantitative analysis of various components in these samples, smart monitoring of industrial processes, and evaluation of the type and intensity of the flavor of various foodstuffs and drugs. Mechanism involved for taste recognition in human and electronic tongue shows the same three levels: the receptor level [taste buds in humans, lipid membrane of sensors in the electronic tongues], the circuit level [neural transmission in humans, transducers in the electronic tongues], the perceptual level [cognition in the thalamus in humans, statistical analysis by software in the electronic tongues].At the receptor level, to detect dissolved organic and inorganic compounds the sensor-probe assembly is used by the electronic tongue. Each probe shows cross-sensitivity and selectivity so that each sensor could concurrently contribute to the detection of most substances found in the liquid matrix. These sensors are composed of an organic coating sensitive to the species to analyze in the samples and a transducer that allows converting the response of the membrane into signals that will be analyzed. At the circuit level, the sample is quantified, digitized and results are recorded [potentiometric readings]. At the perceptual level, process of taste perception or sensation that occurs in the computer where the electronic tongue systems statistical software interprets the sensor data into taste patterns. Depending upon the application for which it is applied, the data analysis can produce a variety of information.
2) Website on Motherhood :-A Mini project of Website development showcasing a website on motherhood.

EXTRA CURRICULAR ACTIVITIES

- Presented a paper covering Operating Systems fundamentals
- Attended a seminar on SQL Technologies
- Volunteering for Microsoft student Partner since 2009
- Stood first runner-up in inter collegiate box cricket in 2008
- Done public speaking course from Royal college, Mira road in 2005
- Stood first runner-up in inter collegiate throw-ball in Feb 2011
- Stood first place in inter collegiate Debate competition in Feb 2011
- Stood first place in inter collegiate Admad competition in Feb 2011

[Guest]

Dear sir/mam,
i am student of mech.engg. and i am completed my internship for six months in zenica(audi)cars india pvt ltd as a Service engineer and now am doing job in this company in payroll but i want to work in your organisation so its honour to me you are given to opportunity to join your organisation.
RAHUL PANCHAL

Email –Rahul.pnchl AT gmail.com
In quest of career enhancements in Mechanical Engineering and related function
Career Objective
To be an active part in the executive team of organization that can refine my Technical & Managerial skills and work towards its growth.
To be prompt in identifying prospects, analyzing requirements & rendering service.
Challenging position that will allow me to utilize my skills.
Educational Qualification
Secondary Examination passed from C.B.S.E. Delhi.
Senior Secondary Examination passed from C.B.S.E. Delhi.
Professional Qualification
Persuing Three Year Diploma in MECHANICAL ENGINEERING from BSAP INSTITUTE OF MECHANICAL ENGINEERING (IME) DELHI.
Working Experience
12 Months Training Experience as a Service Engineer(service+bodyshop deptt.) in “ZENICA (AUDI) CARS INDIA PVT. LTD” ,NARSING PUR INDUSTRIAL AREA, GURGAON.
- Opening the job card and take that proper inventory of vehicle.
- Preparing the estimate and check the avaliblity of parts.
- Intimate the insurance claim with complete process.
- Inspect the complete process for denting and painting of vehicle is done.
- Check the computerised of vehicle and erased the all malfunction in cluster.
- Finally closing the job card and prepareing bill with complete labour.
- Prepared the mis report , daily report and weekly report .
Computer Skills
Basic Knowledge of MS-Office (Word, Excel, Power-point).
Internet.