WorleyParsons Oman Engineering LLC : Oman : PDMS Electrical Designer

[Admin]

http://www.worleyparsons.com

Company Profile
WorleyParsons Oman Engineering LLC


Experience:
10 - 12 Years
Location:
Oman
Compensation:
Rupees Less Than 50,000
Education:
UG - Diploma - Mechanical

PG - Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
10 Aug


Job Description
Developing Electrical design drawings and documents and provide expertise in drawing systems.

Works closely with discipline project engineers/designers and other discipline engineers in the delivery of
project engineering/construction deliverables, quality control drawings and overall project support.
Develop designs in PDMS and (new) drawings in electronic format (Autocad).
Implement hand marked-up changes to drawings.
Maintain standard drawing templates.
Provides quality assurance reviews and detailed checking support.
Maintain and monitor drawing development progress.
Meet project commitments and deliver to schedule.
Identify & implement process improvement to reduce cycle time & cost.

Key Competencies required
Technical knowledge of advanced 3D design applications and processes.
Efficiently uses Aveva software applications (i.e. PDMS design modules, forms/menus, REVIEW)
Knowledgeable of codes, standards and regulatory guidelines that apply to the design disciplines,
specifically any API, CENELEC, IEC, IEC IP, IEEE, NEC, and NEMA standards.
Knowledgeable with designing industry related electrical and instrumentation deliverables (skids,
equipment general arrangements, isometrics, plans, area classification drawings, single-lines, cable block
diagrams, schematics, interconnect wiring diagrams)
Familiar with Electrical & Instrumentation Data Handling Software, such as INTools, PowerGen, and any
Programmable Logic Control or Digital Control System Software.
Is proficient in the use of human factors engineering guidelines and HSE best practices
Ability to work effectively in a team environment or independently with little guidance or supervision is
required.
Knowledgeable of the interface points between design disciplines.
Is able to use Microsoft Word, Excel, Access, and PowerPoint.
Strong interpersonal and communications skills are highly desirable.

Desired Candidate Profile
Minimum 10 years experience in the oil and gas industry with experience on major capital projects Minimum of 5 years experience with 3D drawing systems (e.g. PDMS) and AutoCAD.

Executive Name:
Suresh Jogi

Address:
Not Mentioned

Email Address:
resume.oman@worleyparsons.com

Telephone:
00-9-68

Reference ID:
Electrical Designer - PDMS

Keywords: Electrical Designer PDMS

[Guest]

CURRICULUM-VITAE
Mr. Ramling T. Hulji
Email : rhulji AT hotmail.com ;
ramhulji AT gmail.com

CAREER SUMMARY
Total Experience : 21 years
Worked as an Electrical & Instrumentation designer/Daughter having over 21 years of experience in the various Oil/gas industries including Refinery, Petrochemical, Gas Processing Onshore-Offshore Oil & Gas Production Platforms & Jack-up Drilling Rigs. Worked in offshore for commissioning, project serve, as built, cable routing, JB location Good experience in offshore construction monitoring etc.
6 Year Worked in Dubai petroleum Dubai for various significant offshore Projects as Sr. E & I Designer.
Engineering, Procurements & Construction (EPC) companies in both Onshore & Offshore projects & LV Switchboards manufacturing organizations in India & UAE
Computer Skills
AutoCAD 2000 to 2009; Auto Cad Electrical 2009; PDS & PDMS 11.6.SP3, Microstation V8. GTX Raster V4, VPraster V9, SmartPlant Instrumentation( INTools)- .PDMS E&I Module, , DIALux Lighting designing Software. Windows, M.S. Office, Internet etc.
In Brief, My Overall Job Responsibilities include the Following :-
Project Scope Study, Prepare bulk MTOs.
Interface with piping designers for cable tray routing, supports and equipment location.
Utilize 3D model for clash checking and resolving clashes.
Coordinate with Fabrication group for queries related to Instrumentation & Electrical systems
Co-ordinate /involve with hook-up, offshore survey for tie-ins etc.
Perform the following activities to progress discipline deliverables.
Develop project details from sketches and / or specification evolved by engineers.
Prepare / update Electrical deliverables such as SLDs, Block diagrams, Interconnection drawings, wiring diagrams Cable schedules, Load list, equipment list.
Hazardous area classification drawings.
Cable tray routing (including tray sizing and loading)
MCT layouts, MCT schedule, cable /tray cross section details .
Control building / Switchgear room equipment layout.
As-built drawings, As-built marking /checking (onshore / offshore)
Specific Electrical equipment support details (including preparation of shop drawings or cut lists)
Review the drawings issued by other disciplines and incorporate the required date to discipline deliverables.
Maintaining HOLDS list, weekly progress reporting.
Excellent in designing, developing, and testing electronic and electrical equipment.
Strong experience as electrical designer in well known company.
Good in English communication.
Responsible for power division and lighting intend.
Prepared electrical drawings and specifications.
Handled job time table and budgets.
Maintained excellent operational contact with field member. .
Understanding the Project Requirement & Complying Specifications.
Performing Various Electrical Calculations for Cable Sizing for SWGR, Motors, LDBs, Lighting & Earthing as per Project Spec.
Complete Project Documents / Drawings Design, Preparation, Checking and Finalization, Bill of Material Assignment and requisition of Material.
Preparation of Schedule for Task Completion, Manpower Requirement.
Construction Assistance like Complete work supervision , Progress Reporting , Co-ordination with project Engineers / Management, QC, procurement, material control and yard superintendents
Other Responsibility is, Leading the Design Team / Drafting Staff for output for the Entire Project.
Projects Executed
FM200 FIRE EXTINGUISHING SYSTEM (TOTAL EXPLORATION & PRODUCTION YEMEN)
INLET 3 PHASE SEPATOR (TOTAL EXPLORATION & PRODUCTION YEMEN)
BULK MUD AND CEMENT CONTRL SYSTEM FOR RIG 1 & 2 (SBM)
H2S FIXED GAS DETECTORS FOR FATEH FACILITIES AND SW FATEH FACILITIES PLATFORMS (DP DUBAI)
S.W. FATEH FACILITIES PLATFORMS CONTROL ROOM DAMPERS
INSTLLATION (DP DUBAI)
DCS UPGRADE PROJECT FOR AFP & K2 PLATFORMS (DP DUBAI)
UPS UPGRADE PROJECT FOR AFP & K2 PLATFORMS (DP DUBAI))
HALON PHASE OUT FOR S.W. FATEH FACILITIES PLATFORMS (DP)
DPC-I-28 IMPLEMENTATION PROJECT FOR FATEH 25 NOS. PLATFORMS
TRAIN-‘E’ FUEL GAS SYS UPGRD (DP DUBAI)
CONTROL SYSTEM UPDATE (DP DUBAI)
Ultrasonic gas leak detector (DP DUBAI)
NDC AL – ITIHAD (CANTILEVER CONVERSION)-MIS
RAS AL KHAIMAH GAS COMMISSION (RAKGAS)-MIS
HFO- Heavy Fuel Oil storage & Bunkering Facility – Qatar Petroleum / Qatar Fuel
AGIP KAZASTAN NORT CASPIAN OPERATING COMPANY
BMS JUM AL MAJID 16 BUILDING PROJECTS. (DUBAI)
MMS PROJECTS (DUBAI)
Hakadua Petrochemicals (consultant Technimount ICB Ltd. MUMBAI.)
OSWAL Chemicals and fertilizers Ltd (consultant : H&G Ltd MUMBAI.)
Larsen & Toubro Ltd. (Powai Works) Vendor
Reliance Refinery / Petrochemicals plant at Jamnagar, Gujarat
Bhavari Maize starch plant at Sangali, Maharashtra
Electrical Engineering Design & Drafting Exposure :
Power generation; power distribution; switchgear; protection; drives; lighting systems; integrated lighting systems in plant design, Site surveys, Design & Drafting of, AC/DC, Analog and Digital control systems, Electrical Safety Systems design. Machine Control design and programming (PLC / DCS). Experience of Motors, VFDs, Switchgear, MCC, Transformers etc.
Single line diagrams, Schematic wiring diagrams, Interconnection diagrams, GA & Fabrication diagrams of Control panels, Sub-Station layouts, Equipment’s layouts, Power cables layouts, Cable tray / trench layouts, Earthing layouts, Lighting & small power layouts, Cable schedules, MTO, Construction scope of work, Site data collections, Site surveys for “As-Built” verification of plants & field facilities.
Design of LV Panels, High current systems such as MCC’s (Motor control canter), LVAC Panels, LV Distribution boards. 2. Thorough experience on Bus-bar designs, panel design, MCCB selection and fitment, CT selection, specification, calculations and fitments, General arrangement of all components, Cable trucking, Ventilation arrangements, Wiring routes as per customer requirements and as per IEC standards.3. Should be fully familiar with type test requirements 4. Calculations for short circuit current and breaker sizing, CT calculations. 5. Be able to specify technical scope, elaborate detailed construction requirements, quality aspects. 6. experience on Low Voltage, high current Panels retrofitting, such as replacement of HRC fuses with MCCBs etc. 7. Be able to inspect electrical/electromechanical equipments at workshop/factory based on ordered technical scope, relevant international standards, QA/QC procedures, prepare detailed factory inspection reports including punch lists and issue technical clearance for dispatches. 8. Should have hands on experience on inspecting customer site installed equipments, take measurement, photographs, prepare detailed inspection report on the status of equipment, and identify possible ways to retrofit electrical components. 9. Prepare a detailed retrofit method statement to carryout modification works with minimal or no shutdown of apparatus on live substations environment.
Electrical Design Calculation Exposure
a. Major Trench Layouts from Substation to various Plants
b. Communication Layout Drawings
c. Fire & Gas Protection Drawings
d. Nav-Aid Location Drawings
e. Cooling Tower Power/Control/Lighting Layouts,
f. Pipe Rack cable tray routing Layouts
g. Small Power DB / Lighting DB rating Design / Cable tray Fill Ratio Calc ,
h. Lighting calculations
i. Short Circuit / Cable Selection / Fuse & Breaker Selection Calculations
j. Mutli Cable Transit (MCT) Loading Sketches & Drawings,
k. Conduit Layout Drgs. For Power & Lighting in Classified Area.
l. Estimate, Planned and prepared drawing for cable routing, testing & commissioning.
Instrumentation Engineering Design & Drafting Exposure :
Preparation of P & I diagrams, Instrument engineering data sheets, Input / Output list, Equipment list Layout, Control Room Arrangement, Control room layouts, Field Instrument location layouts. Cable Routing, Typical Installation Details, Material Take-Off, Loop Diagrams, Permutation Diagrams, Detailed Cable routing , Cable Tray routing, Cable Tray sizing, Cable block diagrams, Cable Schedules , Installation Details . Relay schematic wiring diagrams, , Relay panels, Control panels, supervisory control and data acquisition (SCADA) cabinets, Instrument signal diagrams, Hook-ups diagrams, panel arrangement drawing junction box mounting support details, Instrument cable Trench/Tray layouts, MTO, Construction scope of work, Site data collection, Site surveys for “As-Built” verification. As-Built Documentation of plants & field facilities.
Preparation of Instrument Index, Junction boxes Schedule, Interlock Logic Diagram.
Checking of cable & conduit schedule for Instrumentation against cable block diagrams.
Quality checking of Instrument Loop Drawings against latest Termination Drawings, System Drawings. Preparation of Instrument Data sheet for Field Instruments, control valve and Analyzer.
Experience in INtools modules viz; Wiring - Loop Extraction, Hook-up module, Instrument Index, 3-D modelling etc.
EMPLOYMENT DETAILS
- 9 Dec. 2009 – till date
Fortune Controls & Automation Co. LLC (FCA), Dubai U.A.E.
- (EPC Contractors) Worked as an Sr. E & I Designer
Involved in design / drafting / checking Electrical / Instrument project work package. Of Rig 1 & Rig 2 (SBM) as well as FM200 Fire Extinguishing System (Total Exploration & Production Yemen) & Inlet 3 phase separator (TOTAL/TECHNIP). Electrical & Instrumentation Design & Drafting work. FAT, Materials take off (MTO) Preparation & Biding job etc.
- 25 Jan. 2009 – 30 Nov. 2009
Brunel Energy LLC, Dubai, UAE
Deputed to - Dubai Petroleum, Dubai, UAE
The company involved in operating offshore Oil fields in Dubai, UAE.
- Worked in System Engineering – As a Senior E&I Designer for offshore projects
Involved in design / drafting / checking Electrical / Instrument construction package & review Vendor design package for Offshore DCS upgrade & various projects. Offshore serve for various projects. Frequently visited offshore for project work.
- 09 DEC. 2004 to 25 DEC. 2008
Maritime Industrial Services Co. Ltd. Inc. (MIS), Sharjah, U.A.E.
(EPC CONTRACTORS)
An American Multinational Firm Engaged in Design, Engineering, Construction, Maintenance , Refurbishment & commissioning of Drilling Rigs ,Pressure Vessels , Process Skids, Process Modules , Marine Structures , FSOs, Offshore Platforms , Large EPC onshore Projects for Refinery ,Power , Oil & Gas Storage facilities , Heavy fuel oil & gas production / offloading / bunkering projects.
Deputed to - Dubai Petroleum, Dubai, UAE
The company involved in Design/Engineering, Procurement & Construction (EPC) in Oil & Gas, Refineries & Petrochemicals projects in Middle East.
- Worked as a Sr. E&I Designer
Involved in site surveys, site verifications, design / drafting / checking Electrical / Instrument construction package for various oil & gas well hook-ups like Beam pump, ESP, ESPCP, PCP, Gas lift, water injection, Water supply wells, MSV skids, Oil & Gas Gathering Stations, Plants & field facilities.
Design, detail engineering and drafting of Instrument Tray, Cable routing layout drawing. Instruments location plan, JB wiring diagram & JB Location Dwg / Instrument Location drawings, Instrument schedule, data Sheets , Process & Pneu. Hook-up, Cable block diagram etc.
Wellhead safety panel schematic diagram. Instrument loop diagram, Control room equipment layout. Cable penetration detail, safe chart & cause effect dwg. Solar system dwg etc.
- May 1999 to April 2004. (DUBAI)
Juma Al- Majid Group of Dubai, UAE.
OIL AND GAS AND INDUSTRIAL CONTRACTOR AND ELECTRICAL CONTROL PANEL MANUFACTURER COMPANY IN DUBAI.
- Worked as an Electrical & Instrument control designer
Design, Detail Engineering, drafting work and site mark-up of Electrical and Instrumentation area. Layouts(cable route, Lighting, Earthing), Calculation, Specification, cable schedule, Installation drawings, S.L.D. MCC GA., BOM & MTO.
Preparation of instrument location layout, instrument cable tray layout, control room layout and tubing layout for modules and skids for onshore & offshore projects.
Preparation of loop diagram, primary & secondary hook –ups, instrument installation support cable tray installation support drawing. & Mechanical taping details, JB & ADP location on piping layout and JB schedule.
Actively participated in design and installation & maintenance of Building management system and HVAC ,HT switchgear, LT switchgear, MCC, HT motors, LT motors, Control Panels, Distribution Boards, Lighting Panels & Boxes, Local Push Button Stations, Power Cables ( HT ), Power Cables (LT), Control & Lighting Cables, Lighting Lamps, Fixtures & Accessories, Lighting Poles, Junction Boxes, Cable Trays, Conduits, Cable Glands Earthing Material and accessories., modification, programming, termination, & troubleshooting in BMS (Building management system).
Actively participated in the 20 building BMS (Building management system) project.
- Jan 1998 To March 1999
Engineering language Mumbai, INDIA.
The company was involved Sub contractor for Engineering consultants.
- Worked as a ELECTRICAL & INSTRUMENT DESIGNER
Design of Cable/Tray routing, installation drawings, panel design, Etc. Proposal and cost estimate for the design, supply and erection of the control panel and all instrumentation items for the loading arms at JNPT. Electrical package work with panel inspection & site work.
- Jan.1995 To Dec.1997
Akay Organics Pvt. Ltd Mumbai India.
CELLULOSE MANUFACTURER
- Worked as Junior Electrical Engineer
Worked as a Junior Electrical Engineer for Cellulose plant construction. Follow up with consultant for design work such as technical specifications for various equipment and preliminary layout drawing such as HT/LT power cable tray routing, trench & conduit layout for field equipment earthing layout, HT/LT sub station layout
- 1991 to Dec.1994
Chowgule Engineers and Machine Ltd. Shinoli , M.S. INDIA.
MACHINERY MANUFACHARING COMPANY
- Worked as Electrical Maintenance Supervisor
Worked for installation and commissioning of electrical and electronic equipment such as LV/HV SWITCHGEARS, generators, Power transformers, Welding machines CNC machines UPS Voltage regulator etc.
Reviewed various circuit variable speed control AC/DC drives balancing machines
Very good knowledge in radio frequency induction hardening machine Horizontal & Vertical types, jigs boring machine, gear cutting, and Sieving machines
Maintenance of various Electro-Mech. machines control panels of Electrical Electronics in Industrial plants. Renewal of old imported machineries to new one. Handled all types of Analogy/ Digital AC/DC drives, Motors, Pneumatic instruments and PLC. Carried out various machine control panels modification, preventive maintenance as well as fault finding, H.T/L.T installations etc. Independently maintain CNC machines (wirings, analogy programming etc).
Diagnose and remedy faults, participates in the installation of and carries out preventive maintenance on a variety of electrical equipment such as generators, HT & LT switchgears, motors and motor control canters, transformers, UPS, batteries and chargers, lighting circuits, variable speed drives, heat treatment devices, PLC system, Switching up to and including 415V following approved authorization and all associated equipment.
QSHE & Functional Trainings :
1. Offshore Safety Induction
2. Safety Training observation Program (STOP)
3. Offshore & Onshore Permit-to Work ( DPC)
4. Supervisory Safety Training.
5. Industrial First Aid
6. H2s Awareness and Escape
7. Self Contained Breathing Apparatus (SCBA) and rescue Techiques
8. Fire fighting skills

Educational Qualification : -
- Diploma in Electronics & Telecommunication Engineering (DET/CE) passed in July 1991, from Bombay Technical Board, Mumbai M.S.-India.
Professional Qualification :
- Diploma in computer operating (Microsoft word, Excel, internet.)
- Diploma in AutoCAD 2000 2D & 3D
- Raster Image manipulation etc.
- Microstation
- PDS
- PDMS
- SmartPlant Instrumentation( INTools)-
- Diploma in Transistor servicing.
- Diploma in TV servicing
Salary Expected : Negotiable
Availability : 7 Days.