www.StudyOverseasglobal.com Study Overseas Chandigarh : English Faculty

[mariammal]

Name of the company : Study Overseas
Location of the company : Chandigarh
Designation : English Faculty

Candidate Requirement :
Minimum 5-8 years experience as a Engligh/ academic coordinator in reputed coaching institutes and prior experience in content development will be an added advantage.

Job Specification :
Responsible for developing excellent curriculum content and pedagogy and test series in the area of ENGLISH (GRE, GMAT, SAT etc).
Providing faculty training and monitoring the feedback of the lectures.

Website : http://StudyOverseasglobal.com

How to Apply : Send your resume to hr@studyoverseasglobal.com

Address of the company :
Study Overseas
SCO 154-155, Sector 17C
Chandigarh – 160017

About the company :
Study Overseas, one of the largest education consultancies in India represents over 150 education institutions globally. Our network of 14 offices is manned with a staff strength of over 140 experienced personnel. We offer free counselling to students aspiring to study in the United Kingdom, Australia, Singapore, New Zealand, Dubai and Ireland. Our London office specialises in immigration advice and support to students.

General Instructions :
1) This is a job / career / vacancy / recruitment posting from Study Overseas at Chandigarh for post of English Faculty.
2) For more details refer company website of Study Overseas.
3) You can send your resume / CV to the careers e-mail id of the company (Study Overseas).
4) Source of this info is the company website / internet on the date of publishing.

[Guest-IJT]

Name : Poonam
Email : poonam.vatsayan AT gmail.com
Designation / Skillset : Faculty
Dear Sir,
Focused upon reentering into a research position, I have opted to forward my resume for perusal and action. I am an ideal candidate for the above referenced position, since i possess 7 years of research experience and this experience is coupled with a complete doctorate's degree.
During my term in university, I collected and analyzed various materials data relative to its characterizations which is useful for industrial applications. I have performed routine material characterizations, utilizing laboratory equipments and application of synthesized materials as therapeutic tool for cancer therapy and photocatalyst. Also, utilized those synthesized material in humidity and gas sensing application.
My skill level allows me to do :
-communicate and apply test and analyze result.
-oversee lab operation daily.
-apply idea evaluation and gather information.
-study and identified various new applications of synthesized materials.
-analysis of various results.
I feel knowledge, skills and abilities will offer a well-rounded approach for this position and future studies.
Sincerely
Poonam Sharma

Resume :

OBJECTIVE : Looking to obtain a position in leading organization/universities where I am able to apply the knowledge gained through my doctorate degree. I firmly believe in the principle of implementing my duties with complete honesty, integrity, dedication, and determination. I am looking for good career growth opportunities where my talent and knowledge could be best subjected and utilized for the benefit of the organization/ universities and my self.
CURRENT STATUS : Lecturer
Amity Institute of Advanced Research in Sciences (M & D)
Amity University, Sec-125, Noida
TECHNICAL PROFICIENCY :
- Computer : Fortran , Mathematica, Gnuplot, Origin, MS Office.
- Operating System : Windows 2k, 2003, XP, Vista, 7.
- Measurement System : Basic of Instrumentation design, such as XRD, XPS, EDS, Energy Mapping, SAED, Dielectric, TSDC, UV/Visible, FTIR etc.
- Lasers : Working principles of semiconductor diode and nitrogen lasers.
- Manufacturing Science : Engineering materials, manufacturing processes of nanoscale materials.
- Biomedical Instrumentation : Study of biomedical instruments, such as flow cytometer.
- Microscopy Instruments : Working principles of AFM, TEM, SEM and their alignments.
ACADEMIC QUALIFICATIONS :
- Ph. D. (Material Science with specialization in Nanotechnology) from Punjabi University, Patiala, Punjab in collaboration with Jawaharlal Nehru University, New Delhi submitted on 17th September, 2010.
- M.Sc. (Pure Physics) in year 2004 from Guru Nanak Dev University, Amritsar, Punjab.
- B.Sc. (PCM) in year 2002 from Govt. Degree College, Paonta Sahib, H.P., Affiliated to H P University, Shimla.
- Intermediate in year 1999 from CBSE Board, Kendriya Vidyalaya, Rajban, Paonta Sahib, H.P.
- High School in year 1997 from CBSE Board, Kendriya Vidayalaya, Rajban, Paonta Sahib, H.P.
COURSE WORK :
Mathematical Physics I & II, Classical Mechanics, Electrodynamics, Statistical Physics, Quantum Mechanics, Quantum Field Theory, Computational Physics, Particle Physics, Solid State Physics, Electronics I& II, Nuclear Physics, Experimental Techniques, and Radiation Physics.
ADDITIONAL QUALIFICATION :
- Advance Certificate in Networked Centered Computing, NIIT, Paonta Sahib, Himachal Pradesh.
- Certificate course of six months in Quality Management, NIIT, Paonta Sahib, Himachal Pradesh.
- Passed paper of Punjabi Matriculation Examination from Himachal Pradesh Board of School Education (HPSEB, Dharmasala), September-2004
ACHIEVEMENTS :
- Awarded Fellowship from UGC under the scheme of “Fellowships for Meritorious Students”.
INTERESTS :
Computers, Current affairs, Listening music, Trekking, Reading, and Painting.
TOPIC OF RESEARCH :
“Laser Excited Luminescence Decays of Synthesized Nanocrystals and their Morphological Characterization”.
PLACE OF RESEARCH :
- Punjabi University, Patiala.
- Jawaharlal Nehru University, New Delhi.
- National Physical Laboratory and Inter University Accelerator Center (An Autonomous Institutes under Ministry of Science and Technology, Govt. of India), New Delhi.
- RRL, Trivandrum, Kerala.
AREA OF SPECIALIZATION :
- Major area : Lasers and Nanotechnology.
1. Nanoscale semiconductor materials (Nano and Nano ).
2. Synthesis and morphological studies of nanomaterials.
3. Synthesis of various structures of semiconductor nanomaterials.
4. Lasers excited decay kinetics of synthesized nanomaterials.
5. Electrical properties of semiconductor nanomaterials.
6. Photocatalytic and photocorrosion properties of semiconductor nanomaterials.
7. Biotoxicity of semiconductor nanoparticles.
- Minor area : Atomic and Molecular Physics.
OUTLINE OF THE RESEARCH WORK:
Nanotechnology is the design, characterization, production, and application of structures, devices, and systems by controlling shape and size at the nanometer scale. The synthesis and morphological control, of cuprous oxide ( ) and zinc silicate ( ) nanostructures utilizing different surfactants have been explored. It is based on solution-grown reduction-route and sol-emulsion-gel method that maintains high product yield and better chemical processability of product for many industrial applications. The correlation between the micelles of the surfactant molecules, that act as stabilizer during the growth of nanostructures, and / nanoparticles, the morphology of products could be tuned. The interactions are determined by the shape of micelles that mould the crystal structure of the nanoparticles.
The steady state photoluminescence and laser induced time resolved spectroscopic analysis provide the information regarding the energy transfer processes and fate of the excited states of the material. Fast and efficient pulsed-UV nitrogen (337 nm) and diode (374 nm) lasers has been utilized as an excitation source to excite the short lived shallow trapping states present within the forbidden gap. The photoluminescence measurement and decay kinetics of and nanoparticles were inquired as a function of dopant ions concentration and annealing temperature.
An experimental protocol has been shown to synthesize polysulfone based and nanocomposite thin films using solution-grown method. A strong dependence of optical, thermal, and electrical properties on the morphology of polysulfone and doped nanocomposite thin film samples has been observed. The grafting of polymers significantly improves the stability of composite particle dispersion and its compatibility within polymeric matrix. By controllably adjusting the doping level, conductivity anywhere between undoped (insulating or semiconducting) and doped (highly conducting) form of the polymer can be easily obtained as the presence of filler deviate the insulating properties of polysulfone to conductive phase. This permits the optimization of the best properties of polymer nanocomposites.
The development of new materials for solar energy conversion in the field of hydrogen production and degradation of organic contaminants has elicited both social and scientific concerns. Metal-oxide semiconductor based photocatalytic reactions are expected to be promising for environmental remediation. Cuprous oxide nanostructures serve as a potential candidate for photolysis reaction as it absorb the photons from the visible part of solar emission due to its small band-gap of 2.17 eV. Using AZII and TBII as the probe molecules, the size dependent photocatalytic activity of nanoparticles and polyhedrons were systematically investigated, including the effect of dosage and initial concentration of dyes.
The size dependent cytotoxicity of cuprous oxide nanoparticles of variable size on human carcinoma cell-lines have been evaluated in detail. Cytotoxic measurements provide at least a readily available early test system which suggested the prescreening of the nanoparticles as nanoparticles might be toxic to both tumor and normal cells. Such investigations on a broader set of different cell-lines combined with an understanding of the detailed molecular mechanism of nanoparticles and cell interactions, reduces the toxicity to normal tissues. Also, the size modification of nanoparticles enhances the permeability through cell-membrane to create high-permeability nanoparticle-based cancer therapeutics. So, and its derivates can be used as an independent agent and/or photo/radio-sensitizer in cancer therapies, in particular, for elimination of tumor cells otherwise resistant to a number of conventional drugs.
LIST OF TRAININGS/SERC SCHOOLS/WORKSHOPS:
1. Ph. D. orientation course (Modules) in Inter University Accelerator Centre (IUAC) formerly Nuclear Science Centre (NSC), Aruna Asaf Ali Marg, New Delhi, 27th March – 22nd April, 2008.
2. SERC School on Laser Spectroscopy and Applications in Science and Technology held at BARC, Mumbai, 3rd - 22nd November, 2008.
3. Attended ‘Workshop on Computer Laboratory Training in Physics’, Department of Physics, Punjabi University, Patiala, 24th - 28th June, 2004.
4. Attended ‘National Workshop on Radiation Measurements and their Applications’ at Department of Physics, Punjabi University, Patiala, 19th – 20th November, 2005.
5. Attended ‘Workshop on Computer Laboratory Training in Physics’, Department of Physics, Punjabi University, Patiala, 24th – 29th December, 2006.
RESEARCH PUBLICATIONS IN ISI JOURNALS:
Accepted:
1. Poonam Sharma and H S Bhatti, “Influence of Firing Temperature and Dopant Concentration on Fluorescence Decay Parameters of Mn-doped Zinc Orthosilicate Phosphors Nanoparticles”, Physica B (Accepted).
2. Poonam Sharma and H S Bhatti, “Synthesis of fluorescent Hollow and Porous Cu2O Nanopolyhedras in the Presence of Poly (vinyl pyrrolidone)”, Materials Chemisty and Physics, Volume 114, Issues 2-3, April 2009, Pages 889-896. (doi:10.1016/j.matchemphys.2008.10.067).(3 citation) IF: 2.05
3. Poonam Sharma and H S Bhatti, “Laser Induced Down Conversion Optical Characterizations of Synthesized Zn2-xMnxSiO4 (0.5= x = 5 mol %) Nanophosphors”, Journal of Alloys and Compounds, Volume 473, Issues 1-2, April 2009, Pages 483-489. (doi:10.1016/j.jallcom.2008.06.034). (2 citation) IF: 2.1
4. Poonam Sharma and H S Bhatti, “Synthesis of Quasi 1D Cuprous Oxide Nanostructure and its Structural Characterizations”, Journal of Physics and Chemistry of Solids, Volume 69, Issue 7, July 2008, Pages 1718-1727. (doi: 10.1016/j.jpcs.2007.12.013). (2 Citation). IF:1.18
5. H S Bhatti, D Kumar, K Singh, Poonam Sharma, A Gupta, and R Sharma, “Nanostructures of Lead Doped Zinc Oxide: Synthesis and Characterization”, Asian Journal of Chemistry, 18(5), 3301-3305, 2006.
6. H S Bhatti, D Kumar, R Sharma, A Gupta, K Singh, and Poonam Sharma, “Synthesis and Characterization of Mn Doped ZnO Nanobelts”, Journal of Opto-Electronics and Advanced Material, 8(2), 860-862, 2006.
Communicated:
1. H S Bhatti and Poonam Sharma “Synthesis of Solid and Porous Cuprous Oxide Nanopolyhedras and Their Optical Properties”, IEEE Transaction of Nanotechnology (Communicated).
2. Poonam Sharma, S K Sharma and H S Bhatti, “Synthesis of Cuprous Oxide Nanospheres Using Non-ionic Surfactant Polyethylene Glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether”, Solid State Communications (Communicated).
3. Poonam Sharma, S K Sharma and H S Bhatti, “Effect of Surfactant and Reducing Agents on the Morphological Growth of Nanoparticles”, Journal of Colloidal and Interface Sciences (Communicated).
4. Poonam Sharma, S K Sharma, and H S Bhatti, “Photocatalytic Degradation of Azure-II Dye over Cu2O Nanoparticles and Polyhedrons under UV/visible Light Irradiation”, Materials Chemistry and Physics (Communicated).
5. Poonam Sharma, U Patti, and H S Bhatti, “Size Dependent Cytotoxicity Measurement of Cuprous Oxide Nanoparticles”, Toxicology (Communicated).
RESEARCH PAPERS IN CONFERENCES/SYMPOSIUMS:
1. H S Bhatti, Karamjit Singh, Poonam Sharma, Sunil Kumar, and N KVerma “Laser Induced Photoluminescence Parameters of CdS Nanoparticles”, 5th DAE-BRNS National Laser Symposium, Vellore Institute of Technology (VIT), Vellor, Tamilnadu, 7th -10th December, 2005.
2. H S Bhatti, Dhiraj Kumar, Rajesh Sharma, Atul Gupta, Karamjit Singh, and Poonam Sharma, “Synthesis and Characterization of Mn Doped ZnO Nanobelts”, 9th Punjab Science Congress, Sunam, Punjab, 7th - 9th Feburary, 2006.
3. H S Bhatti, Dhiraj Kumar, Rajesh Sharma, Atul Gupta, Karamjit Singh, and Poonam Sharma, “Synthesis and Characterization of Pb Doped ZnO Nanobelts”, National Conference on Lasers, Smart Materials & Radiation Physics, SLIET, Longowal, Punjab, 17th – 18th March, 2006.
4. H S Bhatti and Poonam Sharma, “Synthesis and Characterization of Cu2O Nanowires”, National Conference on Lasers, Smart Materials & Radiation Physics, SLIET, Longowal, Punjab, 17th – 18th March, 2006..
5. H S Bhatti , Dhiraj Kumar, Atul Gupta, Karamjit Singh, Poonam Sharma, Sandeep Sohal, and Rajesh Sharma, “Quasi One Dimensional ZnO Nanostructures: Importance, Characterization and Applications”, National Conference on Advances in Technologically Important Crystals (NC-ATIC), Delhi University, Delhi, 12th – 14th October, 2006.
6. Poonam Sharma and H S Bhatti, “Characterization of Mn-Doped Willemite Nanocrystals Prepared Using Sol-Emulsion-Gel Method” International Conference on Lasers and Nanomaterials (ICLAN), Kolkata, West Bengal, 30th November – 2nd December, 2006.
7. Poonam Sharma and H S Bhatti, “Microscopic Observations & Structural Characterization of Highly Crystalline Synthesized Cu2O Nanowires”, International Symposium for Research Scholars on Metallurgy, Material Science & Engineering (ISRS), IIT Madras, Tamilnadu, 18th – 20th December, 2006.
8. Poonam Sharma and H S Bhatti, “Optical Characterization of Mn-Doped Zn2SiO4”, National Laser Symposium (NLS6), CAT Indore, 5th – 8th December, 2006.
9. Poonam Sharma and H S Bhatti, “Luminescence Properties and Morphological Characterization of Zn2SiO4 Nanocrystals”, Symposium on Radiation Sources, Detection and Application, Punjabi University, Patiala, 5th – 6th February, 2007.
10. H S Bhatti, Dhiraj Kumar, Atul Gupta, Karamjit Singh, Poonam Sharma, and Sandeep Sohal, “Synthesis and Characterization of ZnO Nanobelts Using N2-Laser”, Symposium on Radiation Sources, Detection and Application, Punjabi University, Patiala, 5th – 6th February, 2007.
11. Poonam Sharma, Sandeep Sohal, Hardev Singh, and H S Bhatti, “Electron Microscopy Investigations of Hollow Cu2O Nanopolyhedra”, National Conference on Electron Microscopy & Allied Fields and XXIX Annual Meeting of EMSI, University of Delhi, Delhi, 26th – 28th November, 2007.
12. H S Bhatti, Dhiraj Kumar, Karamjit Singh, Poonam Sharma, Sandeep Sohal, Hardev Singh, and Atul Gupta, “Morphological and Photoluminescence Studies of Mn2+ Doped ZnO Nanomaterials”, National Conference on Electron Microscopy & Allied Fields and XXIX Annual Meeting of EMSI, University of Delhi, Delhi, 26th – 28th November, 2007.
13. Poonam Sharma and H S Bhatti, “Effect of Temperature on the Optical Parameters of Zn2-XMnxSiO4”, National Laser Symposium (NLS6), M S University, Baroda, Vadodra, 17th – 20th December, 2007.
14. Poonam Sharma and H S Bhatti, “Oscillator Strength Values of Manganese Doped Willemite Nanophoshors”, 52nd DAE Solid State Physics Symposium, Department of Studies in Physics, Mysore, 27th - 31st December, 2007.
15. Poonam Sharma and H S Bhatti, “ Synthesis of Zinc Orthosilicates Nanoparticles”, National Conference on Advanced Technologies in Materials and Crystals, ATMC-2008, Dr. Ambedkar College, Deeksha Bhoomi
Nagpur, Maharastra, 28th – 29th Jan, 2008.
16. H S Bhatti, Dhiraj Kumar, Karamjit Singh, Sandeep Sohal, Poonam Sharma, and Hardev Singh, “Effect of Lead Addition on Growth of ZnO Nanobelts”, 11th Punjab Science Congress, Thapar University, Patiala, 7th – 9th Feburary, 2008.
17. Poonam Sharma and H S Bhatti, “Synthesis and Characterization of Cu2O Nanocubes by Simple Reduction Route Method”, National Seminar on Radiation and Materials (NSRM08), Department of Physics, Punjabi University, Patiala, 10th -11th March, 2008.
18. H S Bhatti, Dhiraj Kumar, Karamjit Singh, Sandeep Sohal, Poonam Sharma, and Hardev Singh, National Seminar on Radiation and Materials (NSRM08), Department of Physics, Punjabi University, Patiala, 10th -11th March, 2008.
19. H S Bhatti, Dhiraj Kumar, Karamjit Singh, Sandeep Sohal, Poonam Sharma, and Hardev Singh, “Innovative Developments in Engineering Applications”, Bhai Gurdas Institute of Engineering and Technology, Sangrur, 14th – 15th March, 2008.
20. Poonam Sharma and H S Bhatti, “Network Like Growth of Zn2SiO4 Nanoparticles”, National Symposium for Materials Research Scholars (MR08), Department of Material Engineering and Materials Science, IIT Bombay, 17th -18th May, 2008.
21. Poonam Sharma and H S Bhatti, “Optical Characterization of Pure Cuprous Oxide Nanoployhedras”, 53rd DAE Solid State Physics Symposium, Bhabha atomic Research Center, Mumbai, 16th – 20th December, 2008.
22. Poonam Sharma and H S Bhatti, “Optical Parameters of Zinc Orthosilicate Doped With Manganese”, National Conference on Semiconductor Materials & Technology (NC-SMT 2008), Department of Physics, Gurukula Kangari Vishwavidyalaya, Haridwar, 16th - 18th October, 2008.
23. Poonam Sharma and H S Bhatti, “Synthesis and Characterization of Europium Doped Zinc Orthosilicate Nanoparticles”, National Conferences on Photonics and Material Science (NCPMS-2008), Department of Applied Physics, Guru Jambheshwar University of Science & Technology, Hisar, 24th - 25th October, 2008.
24. H S Bhatti, Dhiraj Kumar, Atul Gupta, Karamjit Singh, and Poonam Sharma, “Time-Resolved Laser Induced Photoluminescence of Pb Doped ZnO Nanophosphor”, National Conferences on Photonics and Material Science (NCPMS-2008), Department of Applied Physics, Guru Jambheshwar University of Science & Technology, Hisar, 24th - 25th October, 2008.
25. Poonam Sharma and H S Bhatti, “Optical Characterization of Mn-Doped Willemite Nanocrystals Prepared Using Sol-Emulsion-Gel Method”, 8th DEA-BRNS National Laser Symposium (NLS-08), LASTEC, New-Delhi, 7th – 10th January, 2009.
26. Poonam Sharma and H S Bhatti, “Electron Microscopy Investigations of Zn2SiO4 Nanoparticles”, National Conference on Electron Microscopy & Allied Fields and XXIX Annual Meeting of EMSI, Bundelkhand University, Jhansi, 17th - 19th January, 2009.
27. Poonam Sharma and H S Bhatti “Formation of Solid Cu2O Nanocrystallites and their Cubical Aggregation and Reduction to Hollow Cu2O Nanopolyhedras”, THERMAC, University of Technology, Berlin, Germany, 25th - 29th August, 2009.
28. Poonam Sharma and H S Bhatti, “Surface Characterization of Cu2O Nanopolyhedras”, National Symposium for Materials Research Scholars and
Workshop on Advanced Characterization Techniques (MR09), IIT Mumbai, 7th – 9th May, 2009.
29. Poonam Sharma and H S Bhatti, “Formation of Solid Cu2O Nanocrystallites and their Cubical Aggregation”, Nano Korea 2009 symposium, Kintex, 26th – 18th August, 2009.
30. H S Bhatti and Poonam Sharma, “Synthesis of Solid and Porous Cuprous Oxide Nanopolyhedras and their Optical Properties”, Nanoelectronic Devices for Defence and Security Conferences (Nano-DDS 2009), Bahia Mar Beach Resort, Fort Lauderdale, Florida (US), 28th September - 2nd October , 2009.
31. Bhupinder K Singh, Poonam Sharma, and M S Gaur, “Thermoelectret Effects in Nanocrystalline Polycarbonate Thin Films”, 5th National Conference on Thermophysical Properties (NCTP-09), M S University, Vadodra, Baroda, 7th – 9th October, 2009.
32. Poonam Sharma and H S Bhatti, “Thermal Analysis of Flouroscent Cu2O Nanopolyhedras”, 5th National Conference on Thermophysical properties (NCTP-09), M S University, Vadodra, Baroda, 7th – 9th October, 2009.
33. Poonam Sharma and H S Bhatti, “Network like Growth of TM doped Zinc Orthosilicate Nanoparticles and its Optical Characterization”, International Conference on Ceramics (ICE-09), University of Delhi, New-Delhi, 13th – 17th December, 2009.
34. Poonam Sharma and H S Bhatti, “Synthesis of Cuprous Oxide: Nanowhiskers to Nanopolyhedra”, DAE Solid State Physics Symposium 2009, M S University, vadodra, Baroda, 14th – 18th December, 2009.
35. H S Bhatti, Meenu Makkar, and Poonam Sharma, “Synthesis and Characterization of ZrO2 Nanocrystals”, 13th Punjab Science Congress held at Punjab University, Chandigarh, 7th – 9th Feburary, 2010.
36. Poonam Sharma and H S Bhatti, “Electron Microscopic Investigations of Surfactant Mediated Shaping of Cuprous Oxide Nanostructures”, International Conference on Electron Microscopy & Allied Fields (EMSI-2010), BARC Mumbai, 8th – 10th March, 2010.
I declare that the above details given are true to the best of my knowledge..
Place:
Dated: (Poonam Sharma)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4251363
Date & Time : 14th Jun 2011 11:13 AM (UTC)
IP Address : 202.12.103.65
Browser Info : Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Maxthon 2.0)
Predicted Country : --

[Guest]

Resume
VARINDER SINGH
Email : varinder.singh1978 AT gmail.com

OBJECTIVES
To be part of an efficient organisation where I can utilise my skills and experience sincerely and effectively to achieve my personal as well as the organisational goals.
PERSONAL & PROFESSIONAL PROFILE
- Friendly and customer oriented.
- Good language skills.
- Capable of building and maintaining good client / customer relationship.
- Ready to do multiple tasks and working under pressure.
- Familiar with MS office applications.
EDUCATION SUMMARY
a. 10th form P.S.E.B
b. 12th from P.S.E.B
c. Gradute in Ats stream
LANGUAGE ABILITY
English : To read, write and speak
Hindi : To read, write and speak
Punjabi : To read, write and speak

PROFESSIONAL EXPERINCE
Ms-word, Ms Excel, Ms –Power-point Tally version 9, Photoshop, Corel Draw,
Flash, HTML DHTML, dream waver.
Work Experience
Special Back office customer support executive in IBM Daksh IT Park Chandigarh from 20th Jan2006 to 19 Feb2007
Job Profile
1. Handing incoming calls of the client’s customer giving information about schemes services and handing the complaints regarding the same and forwarding to the concern department.
2. Worked as Senior Customer Care Executive in Dubai Zabel Ali at Albatuta mall From 03rd March 2007 to Dec 25th 2010
3. Still working as spoken English/ IELTS faculty in Grey Matter from 07 Jan 2011
Strength
Positive attitude even under pressure
Patience honesty, team work and hard worker, Honesty and optimistic towards my work attractive

[Guest]

Dear Sir, Kindly tell me that whether the vacancies of english lecturer in government colleges are available on this site?