Instrument Technician : Resume CV

[Guest-IJT]

instrument technician

CURRICULUM VITAE :
Qualification : New S.S.C Passed from G.S.E.B., Gandhinagar
In the year of March-1997
: Passed Provisional National Trade Certificate in
Instrumentation July-1999
: Passed Provisional National Apprenticeship Certificate in
Instrumentation Dec. -2000
: Diploma Instrumentation is Running with (Kohinoor
Technical Institute & IGNOU )
Total Experience : 10 years , Gulf Experience 7 years
Training Course Attended : PTW System & H2S Training Course From RASGAS
PTW System & H2S Training Course From GASCO
Experience Detail : KNPC MINA AHMADI REFINERY (SHUTDOWN)
KUWAIT
Working with ALMEER TECHNICAL SERVICES CO
Designation : Instrument Forman (PCI)
Duration : 28/11/2010 To 27/12/2010
ASAB GAS DEVLOPMENT PROJECT (AGD II) Abu Dhabi

Working with BECHTEL
Designation :Sr. Instrument Technician (Commissioning)
Duration : 29/12/2009 To 24/06/2010
RASGAS COP ONSHOR PROJECT. Doha Qatar

Working with Qatar Kentz
Designation : Instrument Technician
Duration : 15/12/2007 To 31/07/2009
Dolphin Project, Doha, Qatar

Working with Qatar Kentz
Designation : Instrument Technician
Duration : 17/10/2006 To 14/12/2007
RASGAS LNG EXPANTION PROJECT. Doha Qatar

Working with CCIC.
Designation : Instrument Technician
Duration : 15/01/2003 To 05/10/2005
EQUATE PETROCHEMICAL (SHUT DOWN) KUWAIT

Working with Kharafi National
Designation : Instrument Technician
Duration : 04/03/06 To 19/04/06

VIJHA ELECTRONICS LTD
Designation : Instrument Technician
Duration : 23/11/2000 To 11/01/2003

Jaysynth Dyestuff (India) Ltd.
Designation : Asst. Instrument Technician
Duration : 15/10/1999 To 14/01/2000

Job Profile : Through out of my Professional Career I have been
associated in all aspect of Pre-Commissioning and
Commissioning . Maintenance of process control . Instrument with both PNEUMATIC & ELECTRONIC.
This Includes : Installation ,commissioning & start-up, maintenance,
Calibration, Trouble shooting and repairs, panel and
junction box wiring, Loop checking.
Instrument Handled :
- Yokogawa, rose mount fisher smart series transmitters (vortex , level , flow , pressure & temperature) with hart protocol communicator.
- Neles James bury , fisher rose mount smart type ( DVC 6010) control valves , shut down valves of biffi Adams & Neles James bury.
- MOV ( Rotork Controls ) Pacscan master station. ENDRUS & HAUSER –ULTRASONIC Leveltransmitters. Displacer type leveltroll by TOLYOKEISO. Electromagnetic flow-miter & magnetrol.
- FOXBORO I/A series version VI, Triconex ( TMR ).
- Power generation – general electric gas turbine control system. GE speedtronic mark-6 & steam boiler (MACHI)
- Process compressors (MR & PROPANE) CCC anti surge controls, Vibration monitoring system-Bentley Nevada (3300 & 3500) Bentley Nevada tend master 2000 serial communication , loop checking , commissioning, function check and start up activities of both the compressors.
- Fire and gas Triconex System.
Infrared gas detector system. Optima plus (sieger)
open path flammable gas detector sieger.

I have got the work experience in various plant like Petrochemical & Gas plant.

I have worked on various type of pneumatic , electronic , microprocessor based instruments like smart transmitters ( Honeywell , Rose mount , Yokogawa) and vibration monitoring system based rotating equipment like Bentley Nevada (3300 &3500 & trend master ) Speedtronic , Mark –6 Systems.

I have familiar with the latest process control Technology like TDC 3000, Foxboro I/A series Yokogawa Centum CS , Triconex (TMR) PLC for safe guarding system (HONEYWELL).

Have knowledge of P & I diagram , Logic diagram , Loop Schematics , Loop wiring diagrams , Ladder diagram etc.

Responsibility Taken :
Handle independently loop checking commissioning Start
Up. If any major problems comes try to solve the
problem as soon as possible and minimize the down time.
Very helping nature to every one and made the friendly relation with everyone. So good communicator with team ( working person ), senior , process department and other associated Department.

Date : 26/03/11 Yours Faithfully
( HITESH M. LAD)

[Guest-IJT]

Name : mahesh v patel
Email : mahesh_patel8884 AT yahoo.com
Designation / Skillset : instrument technician
hello dear i am mahesh patel that is my cv pls find it thank u

Resume :
Date :
Respected Sir,
SUB : An Application for the Post of INSTRUMENT TECHNICIAN for Overseas Employment
Being given to understand that you have been recruiting personal for the above post for employment in overseas countries, I am taking this opportunity to submit my candidature with relevant detail for your kind consideration.
NAME IN FULL : PATEL MAHESHBHAI VASANBHAI

Date of Birth : 12-07-1986
Place of Birth : Dipla (Navsari)
Nationality : Indian.
Marital Status : Married.
Languages Known : Hindi, Gujarati and English
- PASSPORT DETAIL :
Passport No : G – 5771489
Issue at : Surat
Issue Date : 08-11-2007
Valid Up to : 07-11-2017.
- EDUCATION : S.S.C. Passed in April - May 2001
- TECHNICAL : Professional National Trade Certificate Instrumentation
(August-2001 to July-2003)
- TOTAL EXPERIENCE : IN INDIA & OVERSEAS , 7 YEAR

Employer : Qatar Kentz Engineering & Constructors(Qatar)
Designation : Instrument Technician
Duration : 01-10-2009 to 25-01-2011
Project : Qatar Shell Pearl GTL Project
Position at : JGC KBR (JK-Utility C6 Commissioning)
Job done : Loop cheking,Trouble shooting,function Test in steam
Turbine(siemens),Gas turbine(ge) like Vibration system(bently
Nevada 3500 series),ESD valve Time Checking,Control valve
Stroke cheking,valve calibration(auto-tuning,Man tuning,valve
position limit cutt off value setup like all work do with KBR
Commissioning Team,I am Famliar with ips(instrument protective
system)DCS (distributed control system) of HONEYWELL C300
FIELDBUS FOUNDATION system,Involved in Commissioning
and Dry Function Test,Dynamic Function Test,Cause and Effect.

Employer : Qatar Kentz Engineering & Constructors(Qatar)
Designation : Instrument Technician
Duration : 01-12-2008 to 31-09-2009
Project : Ras laffan Olefin Company(RLOC)
Position at : 8458U-Technip France
Job done : Calibration,Loopchecking on consol & in field,function test,
Trouble shooting of all instrument like control valves,transmitters,
Vibration probe motor operating valves,Switch of YOKAGAVA
Centum 3000 R3 Field Bus Foundation system,Commissioning,
Prepare to strat up of plant.

Employer : UTS Kentz Engineering & Constructors(Abu Dhabi)
Designation : Instrument Technician
Duration : 02-11-2008 to 30-11-2008
Project : In Habshan Gasco OGD-III Position at : Bechtel Job done : Calibration,Loop checking, Functional test,commissioning….

Employer : Al-Meer Technical Services Co. W.L.L.(KUWAIT ) Designation : Instrument Technician
Duration : 05-02-2008 to 02-06-2008
Project : K.O.C For 50 MBOPD North Kuwait Job done : Calibration,loop checking,Trouble shooting and commissioning
Of Instrument Control system.

Employer : Gujarat State Fertilizer Limited, Kosamba, Surat.
Designation : Instrument Technician
Duration : 08-10-2006 to 07-10-2007
Job done : Worked In Fiber Unit At Kosamba, On Instrument Installation,
Loop Checking, Pre – Commissioning, Continuity Testing Of
Process Control Instrumentation

Employer : Gujarat Instrument Limited, O.N.G.C. Hazira, Surat.
Designation : Instrument Technician
Duration : 01-05-2005 to 28-08-2006.
Job done : Involved in Maintenance work,Calibration of Transmitters,
Vibration probe,Loop cheking,Function test,Control Monitoring
Instrumentation ESD Valve Timing cheking.

Employer : Navin Fluorine Industries, Bhestan, Surat.
Designation : Trainee Instrument Technician
Duration : 15-03-2004 to 14-03-2005.
Job done : Worked in Regular Maintenance Team with various Process
Instuments

HSE Training history : - H2S Awareness and escape
-PTW System
-Job Hazard Analyses
-Supervision of Safety and CPR First Aid
-Leadership Charisma
-LOTO System
-Life Saving Rules

Certificates / Courses : Qatar shell Pearl GTL training village,Raslaffan,Qatar
-Permit to work system
-Confind space entry cbt course
-Hand safety & manual handeling
-Hazard indentification cbt course
-Working at height cbt course
-Defensive driving refresher cbt course
-Emergency response cbt course
-H2s awerness cbt course

Instrument handel during maintenance,commissioning and shutdown:
- Loop checks and commissioning of all field Smart Instruments.
- Experience with calibration and functional checks of all types of Smart Instruments, sensors and Final control Elements.
- Interpretation of loop drawing, Instrument cabling & terminations, Cable schedule, Hook-up drawing, and P&ID drawings.
- Extensive troubleshooting experience for all fields instruments during loop check, startup and commissioning activities.
- Generation and maintenance of all types of records for Quality control checks including calibration, leak checks and other inspections.
- Field Diagnostics Check and Remote calibration using HART 275 & 375 & BT 200 Communicator.
- Valve like Control Valve, On-OFF Valve, Divert Valve, Circulation Valve,and all type of Positioner like pneumatic, Smart (DVC 6000) calibration, installation, over hauling, fault finding and corrective and preventive maintenance like Masoneilan, Valtek, Fisher ABB and other manufacturer
- DCS System of YOKOGAWA CENTUM CS 3000&1000,Honeywell TDC3000&
EKPS C300, Honeywell Experion & Foundation Field Bus System.
- Vibration Monitoring System 3200 & 3500 Series
- Fire & Gas System

I am sure you will consider my application favorably and you will call me for a personal interview when, I shall submit my all the relevant certificates in original, I assure you that I will carry out the entrusted duties honestly and to the entire satisfaction of my superiors, incase of selection for the post applied for.

Thanking you,

Yours Faithfully

[Mr. Patel Maheshbhai V]
Sign:

[Guest]

RESUME

P.Y.Nimgade
Email : - prashant_nimgade AT rediffmail.com

EDUCATIONAL QUALIFICATION :-
- Diploma Third Year Appear in Electronics & Telecommunication From JRN Vidyapith Rajasthan University From-2009.
- NCVT Passed in June- 2003 From Mumbai Board.
- I.T.I.(Instrumentation) Passed From Shri Sai I.T.I. Chandrapur in July-2001.
- H.S.S.C. Passed From Anand Vidyalaya, Bembal in Mar-1998 From Nagpur Board.
- S.S.C. Passed From Vishwashanti Vidyalaya, Saoli in Mar.-1995 From Nagpur Board.

COMPUTER PROFECIENCY :-
- Six Month Certificate Course in Computer Data Processing.
- MS-Office, Window-98.

OTHER QUALIFICATION :-
- One month certificate course in PLC (Allen Bradley, Siemens & GE fanuc), and SCADA (In Touch), & AC Drive.
P.T.O.
INDUSTRIAL EXPERIANCE :-
PRESENTLY WORKING :-
Company :- INDORAMA SYNTHETICS LTD.
(15*2 MW Captive Power Plant)
Designation :- Instrument Technician
Duration :- Presently Working. (Dec-2009 To Till Date)
Place :- Butibori, Nagpur.( M.S.)
PREVIOUS EXPERIANCE :-
1) Company :- VARAM BIO ENERGY Pvt. Ltd.
(10 MW Bio-Mass power plant.)
Designation :- Instrument Technician
Duration :- One Year. (Dec-2008 To Dec-2009)
Place :- Lakhani, Bhandara.( M.S.)
2) Company :- ULTRA TECH FLY ASH PLANT
Designation :- PLC Operator (Instrument Mechanic)
Duration :- Two Year & Six Month. (Jun-2006 To Dec-2008)
Place :- C.S.T.P.S. Chandrapur.
Chandrapur, Dist-Chandrapur.( M.S.)
3) Company :- GOPANI IRON & POWER PVT. LTD.
Designation :- Instrument Mechanic
Duration :- Two Year & Three Month (Mar-2004 To Jun-2006)
Place :- Tadali, Dist-Chandrapur.(M.S.)
4) Company :- MANIKGARH CEMENT WORK
Designation :- Apprentice(Instrument Mechanic)
Duration :- One Year. (Apr-2002 To Apr-2003)
Place :- Gadchandur
Dist-Chandrapur.( M.S.)
JOB PROFILE :-
Having experience in Erection, Commissioning, Maintenance, troubleshooting and Calibration of
Following Instrument.
- TEMPERATURE :- Temperature Transmitter.(Rose Mount), Thermocouple(J.K.T.Types), RTD’S.
(PT- 100), Temperature Indicator, Temperature Calibrator.
- PRESSURE :- Differential Pressure Transmitter, D.P. Switches, Pressure Gauges,
- LEVEL :- Level Trasnmitter, Level Switches, RF Level Sensor.
- Current to Pressure Transducer (I/P).
- FLOW :- Flow Transmitter, Roto Meter.
- PLC :- Create new ladder and SCADA programming & Checking Input output signal.
- Meter Handling :- ( Multimeter, Fluke-Temperature & Pressure Calibrator, HART (Emersion Process Control, Beamax.)
- Working Experience Electrical Control panel
- Gas Analyser : O2, CO2, Opacity Meter.
- MOV(Rotorke)
- Speed Sensor, Vibration Sensor, Tacho Generator.
- PH Sensor, Conductivity Sensor
- Pneumatic Control Valve. :-MIL Control, Fisher, Mazda, Instrumentation Ltd, Forbes Marshal,Coso.)
- Air Compressor (Atlas Copco).
- Strain gauge, Load Cell.
- Limit switch, Proximity switch.
- Solenoid valve.
- Impulse Piping, Cu Tubing. etc.

[Guest]

Jitendra D. Nagar
Head of Department (Instrumentation)
Sub : Application for the An Instrument Technician
Dear Sirs,
As a dependable and a skilled person, I wish to express my strong interest in seeking a position with your organization. I enclose my curriculum vitae.

My careers have fully involved technically background and contributing to overall efficiency has always been a priority.
Currently I am working as an Instrumentation technician in SAURASHTRA CEMENT LTD; - RANAVAV. (Mehta group of Companies) since 1989.
Anticipation your favorable response, I would be pleased to further discuss my qualification and your needs. I look forward with interest to your reply.
Yours sincerely,
Jitendra D. Nagar
PROFILE :
- An articulate Instrumentation & Control Technician with 23 years of experience across Operation Maintenance, Module Calibration & Configuration of Module & Channels.
- Exposed to Calibration of Transmitters, Configuration and Modification in PLC Logic (Allen-Bradley & Ramco systems). Possess sound knowledge of AC drives of Yashkava (Varispeed F7), Allen-Bradley (power flex); ABB & DC drives of L&T (Lntor), Siemens.
- Expertise in driving the Project Engineering, Configuration, Installation, Commissioning and maintenance operations of a wide range of instruments, equipments systems/ machines.
- Adept at conducting fault diagnosis and failure analysis to promptly overcome operational bottlenecks with demonstrated capabilities in handling the entire range of project management activities.
PROFESSIONAL EXPERIENCE :

Thermal Power Station – Wanakbori GUJARAT
Apprentice – Instrumentation
SAURASHTRA CEMENT LTD . July’ 89-Till Date
Technician - Instrumentation
Responsibility : Shift In charge (Overall Plant) & General Shift duties.
EDUCATIONAL DEVLOPEMENT :

I.T.I – Instrument – T.E. Board – Delhi.
S.S.C. Gujarat Higher Secondary Board – Gujarat
KEY ACCOUNTABILITIES :

- Allen-Bradley SLC 5/01, 5/04 & PLC 5/15, 5/20, 5/40 & Supervisory System Installation work.
- Allen-Bradley Micro PLC Programming.
- ROSEMOUNT & YOKOGAWA make smart Temperature, Pressure & DP Transmitter.
- Angle Position Transmitter.
- VVVF Drive, DC drive Installation work
- Gas analyzer Siemens make, iteca make, maintenance work.
- Zero Speed switch, Proximity Switch.
- Cable Laying and instruments and panel Installment.
- Pressure Switch, Temperature Switch Calibration work.
- Pressure Gauge, Temperature gauges Check and calibration.
- Bag filters Timer Panel Installation.
- Electronics Card repairing work.
- Flow switch & Transmitter, Level switch & Transmitter.
Key Strength : Positive attitude, Ability to work in team, self motivated
Eagerness to learn, Flexibility in Work, Workaholic
DECLARATION :

I hereby declare that the above-mentioned information is true to the best of my knowledge.
Jitendra D. Nagar
Place : PORBANDAR
Date : 23/05/2012

[Unregistered]

MUHAMMAD MUBEEN
Mail :mubeenamin64 AT gmail.com

Looking for a Part Time/Full Time position of __________________ where I can demonstrate my technical skills contribute to the company.

ACADEMIA :
2012 DAE instrument from HPI Sargodha
2009 Matriculation from Pirmahal t.t singh

Additional key skills :
> Excellent presentation skills
- Excellent time management
> Excellent interpersonal and leadership skills
> Able to work on my initiative or as part of a team
> Good sense in following instructions and executing a task
> Managing tasks and problem solving skills
> All basic knowlidge about computer

Language Skills :
English : competent in all skills
Urdu : native speaker

Other related courses :
. Plc (programmable logic control) from pitac lahore
. Auto cad (Electrical) from Sargodha

Hobbies :
. Computer
. Hocky

PERSONAL DOSSIER :
Date of Birth : 15December,1992
Nationality : Pakistani
Marital status : Single
Home Address : lahore

[aditya.r.rane]

ADITYA R. Rane
Email id : aditya.r.rane AT gmail.com

PROFESSIONAL OBJECTIVE :
Motivated master’s-degreed in engineering skills with high abilities and visibility to bring to your organization to significantly growth, profitability and efficiencies

CAREER SUMMERY :
** Instrumentation engineer with 5+years of experience
** Experienced in process instrumentation.
** Work experience in fire & gas detection system.
** Good Knowledge of PLC based systems.
** Awareness of SIL, Redundancy, NFPA standards & Practices, etc.
** Experience of handling & commissioning VESDA based system from Xtralis, Australia.
** Commissioning experience of Crowcon, Oliver IGD, Otis, Status Scientific, Spectrex Gas & Flame detectors.
** Commissioning experience of Apollo, Tyco, System Sensor smoke, heat, multisensor and other type of detectors for Fire detection.
** Work experience of Notifier, NSC, Tyco Fire alarm panel & Fiber optic networking.
** Knowledge of cross zoning, 1oo1, 2oo1 & 3oo1 logics, programming etc.
** Effective interpersonal, verbal & written communication skills.
** Strong engineering background.
** Analytical and judgmental skills.
** Good in Microsoft office (Word, Excel, Power Point).
** Strong team player.

PROFESSIONAL TRAININGS :
PST : - Proficiency in Survival Technique
PSSR : - Personal Safety and Social Responsibility
EFA : - Elementary First Aid
FPFF : - Fire prevention and Fire Fighting
HUET : - Helicopter Underwater Escape & Sea Survival Techniques

WORK EXPERIENCE :
HINDUSTAN PETROLEUM CORPORATION LIMITED.
From : 11/10/2006 to 10/10/2007
Worked as Instrument Technician in instrumentation department of HPCL Mahul Terminal.
Job profile :
** Configure field & panel instruments with Distributed Control System (DCS), Programmable Logic controllers (PLC) of Honeywell TDC 3000.
** Worked with various refining processes like PDU, LRE, MNP-1, DHDT, and CPP Plants.
** Carry out Installation of process instruments & devices in various plants & do Calibration, maintenance & service of process control instruments like PID controller, smart & conventional transmitter, control valves, I/P converters, etc.
** Perform maintenance & calibration of field instruments PT, TT, DP, Level transmitter, F & G like Detectors, Control valves, Coriolis type flow meters, etc.
** Configure PID controller as per plant application requirement. Check & establish communication between the device & control panels based on the PLC & DCS.
** Perform trouble shooting & loop checking of the field devices & panel instruments.

MEDICA INSTRUMENT MFG. CO.
From : 01/01/ 2008 to 11/07/2009
Worked as Instrument Service Engineer for Medica Instrument Mfg Co, a pioneer biomedical manufacturer.
Job profile :
** Perform Calibration and repairing of PID & PLC based controllers.
** Validation of different autoclaves, checking of solenoid valve and PT-100 temperature sensors.
** Installation and repairing of various medical instruments like Rotary vacuum evaporator, vacuum controller, PTFE diaphragm vacuum pump, Chilled water circulator, digital colony counter, anaerobic jar, serological water bath, shaking water bath, etc.
** Prepare annual maintenance service report for each of the serviced equipment.
** Prepare validation report for each of the above instruments as per standard validation Protocol ISO : 17665.
** Conduct training for the operation & maintenance teams at major hospitals and pharmaceuticals companies like Enviro vigil, Lilavati, Johnson and Johnson, Dr.Reddys, Proctor and Gamble, Cipla, Charak, torrent, etc.

EVAVO WELLNESS PVT. LTD.
From : 15th July, 2009 to 25th July, 2010
Worked as Instrument Service Engineer for EVAVO, a premium wellness and back care Solution Company.
Job profile :
** Carry out the installation, demonstration and servicing of Fujiiryoki Japanese equipments, ergonomic seating, electronically mechanized equipments.
** Responsible for Quality checks for all the electronic Products & Responsible for managing and maintaining the annul service contract for all electrical & electronic products for the organization,
** Conducted technical training for the sales team as well as research & development for the new launched products.

DETECTION INSTRUMENTS (I) PVT. LTD. Collaborator of Crowcon Detection Instruments U.K.
From : 29th July, 2010 to Feb 2012
Worked as a Commissioning Engineer for Detection Instruments.
Job profile :
To undertake project from projects departments & plan the commissioning schedule to meet the project deadlines. Communicate with client & discus regarding execution of project commissioning.
Coordinate with stores & procurement departments for project.
Major Projects :

Reliance Industries Ltd, Hazira.
Commissioning of gas detection system for butene 1 project for OSBL-TF1, TF2 & ISBL plants.
The gas detection system designed for this project is based on RTP sil3 TUV certified PLC which directly take input from all the field devices like gas detectors, flame detectors & openpath detectors, etc.The major task for the commissioning involves to get the PLC based control panel online.
The following tasks were also carried out while commissioning.
** Inspect the installation of all the field devices as per standard procedures for Termination, location of field device, cable glanding & mounting arrangement, etc.
** Carry out loop checking of all the field devices to ensure the communication from field devices to PLC based control panel.
** Arrange work permit & carry out isolation activities as per the process requirement for the normal operation.
** Cross check the panel internal wirings as per the approved documents & drawings.
** Observe the start-up of the control panel.
** Troubleshoot the problems & get the gas detection system Online.
** Conduct SAT test as per planned schedule to meet the dead lines.
** Check the GDS safety logics with Cause & Effect document one by one.
** Take approval for the successful completion of SAT & handover the system to client
** Conduct training of GDS system to Operation & maintenance team.

End User : Oil & Natural Gas Corporation, Mumbai.
Client : Leighton.
Commissioning of gas detection system for pipeline replacement project2 for MNW Platform. The gas detection system for this project is based on Crowcon Gas monitor, which take inputs from all the gas detectors & generate audio & visual Alarms for the gas leak above permissible limits. The major task for the commissioning involves to get the gas monitor control panel online with Yokagawa ProSafe PLC/DCS Centum VP/CS 3000 based ESD system through Modbus connectivity.
The following tasks were also carried out while commissioning.
** Inspect the installation method followed for mounting Gas detectors & check all the field devices as per standard procedures for Termination, location of field device, cable glanding & mounting arrangement, etc.
** Carry out loop checking of all the field devices to ensure the communication from field devices to control panel.
** Arrange work permit & carry out isolation activities as per the process requirement for the normal operation at platform.
** Cross check the panel internal wirings as per the approved documents & drawings.
** Check the GDS safety logics with Cause & Effect document and observe the data flow from GDS system to PLC.
** Programme GDS panel as per the ESD system requirement to achieve specific alarm/fault signals to initiate ESD operation accordingly.

End User : Oil & Natural Gas Corporation, Ankleshwar.
Client : Godrej & Boyce Ltd.
Commissioning of gas detection system for GGS-1, Motwan, GGS-2, GGS-3.The gas detection system for this project is based on Crowcon Gas Master, which take inputs from all the gas detectors & generate audio & visual Alarms for the gas leak above permissible limits
The following tasks were also carried out while commissioning.
** Inspect the installation of all the field devices as per standard procedures for Termination, location of field device, cable glanding & mounting arrangement, etc.
** Carry out loop checking of all the field devices to ensure the communication from field devices to control panel.
** Arrange work permit & carry out isolation activities as per the process requirement for the normal operation.
** Cross check the panel internal wirings as per the approved documents & drawings.

End User :Mangalore Refinery Petrochemical Ltd, Mangalore.
Client :Paramount Ltd.
Commissioning of gas detection system for Wet air oxidation Unit project, phase2. The gas detection system for this project is based on GE Fanuc 90-30 PLC, which take inputs from all the gas detectors & generate audio & visual Alarms for the gas leak above permissible limts.The gas detectors used in this project are Oliver IGD, IR & Pellistor type.
The following tasks were also carried out while commissioning.
** Inspect the installation of all the field devices as per standard procedures for Termination, location of field device, cable glanding & mounting arrangement, etc.
** Carry out loop checking of all the field devices to ensure the communication from field devices to control panel.
** Arrange work permit & carry out isolation activities as per the process requirement for the normal operation.
** Cross check the panel internal wirings as per the approved documents & drawings.

End User :Cairn Energy India Pvt Ltd, Viramgam.
Client :Indian Oil Tanking Ltd.
Commissioning of Fire & Smoke detection system for Barmer to Salaya Pipeline at Viramgam Terminal. The Fire detection system for this project is based on Yokagawa ProSafe PLC/DCS Centum VP/CS 3000, which take inputs from the Spectrex Flame detectors & generate outputs for audio visual Alarms and ESD system as per the approved operational logic.

The smoke detection system is based on Tyco control panel & heat detectors. The smoke detection system also interfaced with crowcon gas detectors using special input modules. The smoke detection system programmed to generate special logical output for HVAC& Damper systems.

The following tasks were also carried out while commissioning.
** Inspect the installation of all the field devices as per standard procedures for Termination, location of field device, cable glanding & mounting arrangement, etc.
** Carry out loop checking of all the field devices to ensure the communication from field devices to control panel.

End User :Indian Oil Corporation Ltd, Panipat.
Client :Toyo Engineering.
Commissioning of VESDA system of Xtralis make Very Early Warning Aspirating Smoke Detection System for Main Control Room. The Vesda system utilizes an aspirator to intake the air of all the areas through sampling holes of pipe network.
The commissioning of vesda system mainly consists of the designing of pipe network using the Aspire software. The commissioning & configuration is done through VSM software. The communication through VESDA Net HLI link module.

End User : Sterling Global Oil Resources Ltd, Lagos
(United Oil Production Ltd, Sandesara Group Company Ltd) in Nigeria.
Commissioning of gas detection system for Flow station. The gas detection system for this project is based on Crowcon Gas monitor, which take inputs from all the gas detectors & generate audio & visual Alarms for the gas leak above permissible limits. The major task for the commissioning involves to get the gas monitor control panel online with Yokagawa ProSafe-RS PLC/DCS Centum VP/CS 3000 based ESD system through Modbus connectivity.
The following tasks were also carried out while commissioning.
** Inspect the installation method followed for mounting Gas detectors & check all the field devices as per standard procedures for Termination, location of field device, cable glanding & mounting arrangement, etc.
** Carry out loop checking of all the field devices to ensure the communication from field devices to control panel.
** Arrange work permit & carry out isolation activities as per the process requirement for the normal operation at platform.
** Cross check the panel internal wirings as per the approved documents & drawings.
** Check the GDS safety logics with Cause & Effect document and observe the data flow from GDS system to PLC.
** Programme GDS panel as per the ESD system requirement to achieve specific alarm/fault signals to initiate ESD operation accordingly.

SIMILAR PROJECTS :
- Gujarat State Petronet LTD Commissioned Open Path Gas Detection System form Spectrax U.S.A & Point Gas Detection System from Status ScientificControls, U.K for Darod to Jafrabad and Morbi to Mundra Natural Gas pipeline projects communicated with Invensys-Foxboro-Eurothem
- Sanofi Aventis, Ankleshwar. Commissioned VESDAby Xtralis Very Early Warning Aspirating Smoke Detection System for Ware House and Management Building
- Syngenta India Limited. Commissioned Crowcon Gas Detection System, U.K. for R & D Lab and Gas Bank
- Ford India. Commissioned Crowcon Gas Detection System, U.K. for Test Cell


PRESENT JOB EXPERIENCE :
Saudi Aramco Exxon Mobil Refinery Company Ltd. (Samref)
From : 30thapril, 2012 to till date
Working as Instrument in instrumentation department of Saudi Armco mobil refinery company ltd. (SAMREF)

Job Profile :
** Installs, maintains, repairs, overhauls, calibrates and tests a wide variety of industrial Instrumentation that record indicates, control and regulate level, flow, pressure, temperature, Position and water analysis.
** Troubleshoots telemetry and process controller hardware, maintains a functional, Knowledge of the operation of the telemetry system software and hardware.
** Makes periodic preventative maintenance inspections of all metering control instruments, Diagnoses existing or potential trouble; cleans, lubricates, calibrates and adjusts as conditions indicate.
** Lays out, installs and places into service new metering, controlling and recording devices, Calibrating as required; may extend or connect related electrical circuits.
** Reads and interprets wiring diagrams, mechanical drawings, and specifications in making installations or performing major repair work.
** Troubleshoots more complex telemetry, SCADA, and PLC software and hardware issues, makes recommendations and performs software changes, and maintains documentation of changes to the software and hardware.
** Performs the repairs and testing work requiring higher-level knowledge, skills, and abilities, and serves as a technical resource to others.
** Reviews engineering designs and modifications to control systems and recommends both Technical and operational improvements.
** Keeps records; makes verbal and written reports of work performed.
** Performs related duties and has other related responsibilities as required.

EDUCATIONAL QUALIFICATION :
** Professional of Instrumentation from Advanced Training Institute, Central Government of India, Ministry of Labour & Employment, Mumbai. India
** National Council for Vocational Training in Instrumentation from Advanced Training Institute, Mumbai. India
** Bachelor in Commerce from Mumbai University, Mumbai. India

EXTRA CURRICULAR ACTIVITIES :
Completed Sea Cadet Corps with rank Able Cadet, Training ship -JAWAHAR, Colaba, Mumbai- 400005, from Oct- 2000 to July 2004.

Aditya R. Rane