Mechanical Engineer : Resume CV

[Guest-IJT]

ARNAB KUMAR BISWAS
arnab.bis.85 AT gmail.com
Sr.engineer/Sr.executive

CURRICULUM VITAE
ARNAB KUMAR BISWAS

E-mail : arnab.bis.85 AT gmail.com / mast_anu420 AT yahoo.co.in

Career Objective : Looking forward to work in a highly competitive and challenging environment that will give cater to need of technological marvels and to be established by giving my level best and earning money.

EDUCATIONAL QUALIFICATION :
GENERAL :
EXAMINATION BOARD NAME OF THE YEAR OF PERCENTAGE
PASSED INSTITUTION PASSING OF MARKS
MADHYAMIK W.B.B.S.E VIDYASAGAR VIDYAPITH
(MIDNAPUR) 2002 74.0
HIGHER SECONDARY W.B.C.H.S.E VIDYASAGAR VIDYAPITH
(MIDNAPUR) 2004 59.0

TECHNICAL :
EXAMINATION COUNCIL NAME OF THE YEAR OF PASSING PERCENTAGE OF PASSED INSTITUTION MARKS
1st SEM 2006 75.7
DIPLOMA IN 2nd SEM 2006 66.4
MECHANICAL W.B.S.C.T.E THE CALCUTTA TECHNICAL SCHOOL
3rd SEM 2007 69.5 72.8 FIRST CLASS
ENGINEERING 110,S.N. BANERJEE ROAD,KOL-14 4th SEM 2007 76.2
5th SEM 2008 68.9
6th SEM 2008 76.8

Other Qualification : AutoCAD from Youth Computer & Trainning Centre, MOULALI, KOLKATA.

Working Experience : Working in STONE INDIA LTD..(Duncan Goenka group) from 1st August,08 As a Sr. Executive(PROJECT RESEARCH & DEVELOPMENT UNDER TECHNICAL DEPARTMENT) for rail road Equipments of Indian railway (EMU,DMU,DIESEL&ELECTRIC LOCOMOTIVE).
Company Profile : A multi-product engineering company located in Kolkata, has been serving the Indian Rail-road industry for ever seven decades. It is a leading manufacturer of mechanical products like Air spring ,Air suspension control equipments,air dryer, Panel(EMU,DMU,DIESEL),Pneumatic Valves(REL-10,Loco Valves),Brake System as well as Electrical products mainly for Rail-ways like Pantograph, Alternator, Regulator, etc.

Current CTC : 2.50 Lacs

Current Location : Kolkata
Preferred Location :Anywhere in West Bengal/Eastern India
Product Handled :Products of Indian Railways (i.e.-Air Spring,Control
Equipment)

DECLARATION :
I here by declare that all informations stated above are true to best of my knowledge and if any information is found to be incorrect, then I will liable for the cancellation of my candidature.
..
Date :27.03.11

[Guest]

Somnath Dey
E-mail : deysomnath05 AT gmail.com


I aim to obtain the position of an Engineer in a respectable firm where I can fully utilize my talents, knowledge, expertise, proficiency and excellent communication and inter-personal skills for the benefit of the firm.

TOTAL WORK EXPERIENCE (13 months)
- Worked in CCL kedla, Hazaribagh as a Trainee from May 2004 to Aug 2004.
- Worked in BCCL Katras Garh, Dhanbad as a Trainee from Dec. 2005 to Apr 2006.
- Worked in ECL Devchand Nagar, Burdwan as a Trainee from Sep. 2006 to Jan. 2007.
- Worked in CCL Topa, Ramgar as a Trainee from Sep. 2007 to Nov. 2007.
TECHNICAL EXPOSURE

- Operating System :-WINDOWS 98, XP, VISTA, W7.
- Packages :-MS Office.
- English Skills :-Technical Writing.
- Designing software :-Auto cad, Catia V5.

AREA OF INTEREST :
- Plantation
- Reading books

PROJECT TITLE :
Reduction of cold start emission from multi cylinder petrol engine using close coupled catalytic converter.

EXTRA CURRICULAR ACHIEVEMENT :
- Gas testing :-D.G.M.S. Dhanbad.
- First aid [] :-Minister of health & family welfare.

[Guest]

CURRICULUM VITAE

VENKATESH . S
Sira (T), Tumkur (D)
Sira-572137
Email : venki8271 AT gmail.com

Career Objective :
Seeking a position to utilize my skills and abilities in your company that offers professional growth while being resourceful, innovative and flexible.

Education Qualifications :
B.E, Mechanical Engineering
Sri. Siddhartha Institute of Technology, Tumkur.
Aggregate : 66.38%(CGPA-7.39)
An Autonomous Institution under Visveswaraya Technological University,Belgaum.
Year of completion : june-2011.

PUC :
Sarvodaya PU College, Tumkur
Percentage : 54.7%
Karnataka Pre University Board.
Year of completion : 2007.

SSLC :
St.Anne’s High School, Sira.
Percentage : 78.24%
Karnataka Secondary Education Examination Board.
Year of completion : 2005.

Technical Skills :
- Operating Systems : Windows 98/2000/XP/Vista/7.
- Software Packages : Design lab, Algor lab, Autocad, Solid Edge.

Academic Project :
TITLE : “DESIGN AND FABRICATION OF CNC MACHINE”.

We have designed the portable CNC machine which works on the basis of programmable logic unit (PLC). It performs Drilling operation upto 2 mm and it is mainly a desktop CNC, easy to carry.

Strength and extracurricular activities :
- Elected as student vice president of the Engg College in my final year.
- Good Interpersonal skills.
- Ability to take on challenging roles.
- Willingness to learn and work hard.
- An active member of NSS and attended many camps.
- Student member of IEEE, MIE and IME.
- Good time management.
- Self-motivated.

Personal Profile :
Name : VENKATESH S
Father's Name : SANJEEVA MURTHY S R
Mother’s Name : SHOBHA
Date of Birth : 28/12/1989
Nationality : Indian.
Mother tongue : Kannada.
Hobbies : Traveling, playing cricket and listening to music.
Languages Known : English,Kannada,Hindi and marati.

DECLARATION :
I hereby declare that the above statements are correct and true to the best of my knowledge.


Place : Tumkur
Date :
(VENKATESH S)

[Guest]

Krishna Kumar
B.TECH. (Mechanical Engg.)
College of Engg. & Rural Technology, Meerut.

Permanent Address :
Dist.-Allahabad (up),
Pin code :212402,
E-mail : Krishna123yadav AT gmail.com

Personal Data :
Name : Krishna Kumar
D.O.B : 03st Feb 1986
S/O :.Vidyadhar yadav
Gender : Male
Marital Status : Single
Languages Known : English, Hindi,
Nationality : Indian
Hobbies : Listening music, watching and Playing cricket.

Strengths : Positive attitude, hard working, Self confidence, Willing to learn new thing, Punctual & determined. CURRICULUM VITAE

Emali- : Krishna123yadav AT gmail.com,

Career Objective :
I intend to build a career with leading corporate of hi-tech environment which will help me to explore myself fully and realize my potential. I am willing with committed & dedicated people, to work as a key player in challenging and creative environment, to continuously upgrade and acquire knowledge and skills to effectively use in industry.

Work Experience :
- Working in Artic Pharmaceutical Nasik as a Trainee in plant maintenance from July 2010 to May 2011.
- Presently working in Engineering Dept in Fresenius Kabi Oncology Ltd. from June 2011 to till date in Engineering & Utility as an OFFICER.

Job responsibilities are following :-
1- UTILITY JOB’S
- Utility equipment handling (Boiler, Air Comp., Chiller’s, DG).
- Monitoring & handling breakdown of water pre treatment plant.
- Breakdown handling of RO plant.
- Recording & controlling of power consumption in MIS.
- Generate MIN for issued the material from engineering store.
- Technical discussion with various AMC execution parties.
- Arranging visits as per scope of work.
- Deal with various internal/external agencies on day to day basis.
- Break Down and Preventive Maintenance handling.
- Monitoring of utility and Building management system.
- Break Down and PM of utility and Building management system.

2- PLANT MAINTENANVE JOB
- Vial Washing M/C handling. (ROMACO)
- Filling m/c maintenance. (MAR)
- Autoclave maintenance. (MACHIN FABRIK)
- Terminal Sterilizer. (MACHIN FABRIK)
- Preventive Maintenance
- Vendor development for spares.
- Planning of Spares and inventory control.
- Documentation as per the requirements of regulatory authorities.

Technical Qualifications
Graduation : -
Examination Passed University Year of passing Percentage of marks
B. Tech. (Mechanical Engineering) U.P.T.U Lucknow June, 2010 65.66%

Academic Qualification :
Examination Passed Name of the Board Year of passing Division
High School UP Board 2001 2nd
Intermediate UP Board 2004 Ist

Audit Face :
1. MHRA 4. JAPAN
2. USFDA 5. TURKY
3. WHO 6. IRAN

Areas of Interest :
- Utility Handling Unit.
- Project related work.
- Water system.
- Plant maintenance.

Vocational Training :
Power Plant Area IFFCO Phulpur Unit
Duration : - 1 Month
- Work on Boiler
- Turbine & Generator

Skills :
SAP Operation, Basic knowledge of computer, M.S. Office, Internet & Excel working.

Declaration :
I consider myself familiar with mechanical Engineering aspects. I am also confident of my ability to work in a team.
I hereby declare that the information furnished above is true to the best of my knowledge.

Place : Krishna kumar

Date :
Signature