CCNA, CCNP, MCSA, MCITP Training Pune : www.networkingsolution.in Networking Solutions

[muthukalee]

Name Of The Training Institute : Networking Solutions

Location Of The Training Institute : Pune

Training Offered :

BEST CCNA, CCNP, MCSA, MCITP TRAINING IN PUNE

Network Engineering is one of the best and hottest carrer fields available today. Some claims that a serious shortage of qualified people to fill these networking jobs exists, and these claims may lure some people into the fray hoping for an easy position with a fast growing company.

Several types of positions exist in networking, each with different average salaries and long term potential, and one should posses a clear understanding of these

The basic job title for computer networking are :

* Desktop Support Engineer
* System / Network Administrator
* Network (System) Engineer
* Network (Service) Technician
* Network / System Analyst
* Network / Information Systems Manager

There are more openings than can be met by existing candidates. We brings you exceptionally good training courses to equip you to take up challenging and rewarding jobs as a Hardware Engineer, System Administrator, Network Engineer, Telecom Engineer . Networking Solutions, BEST training for CCNA, CCNP, MCSA, MCITP in Pune

Address Of The Training Institute :
Networking Solutions
303, Pinnacle Pride, Opp.Hotel Durvankur,
Above Maharashtra Electronics,Tilak Road, Pune - 411030

Website : http://www.networkingsolution.in/

Email Address: admin@networkingsolution.in

[Guest-IJT]

Name : bathula subramanyeswara rao
Email : bathulasubramanyam AT gmail.com
Designation / Skillset : mtech fresher in embedded systems

Resume :
CAREER OBJECTIVE
To obtain a position as an embedded systems designer in a challenging environment that utilizes team-
work effort for researching, learning and developing new high-tech products
ACADEMIC QUALIFICATIONS
COURSE /DEGREE COLLEGE / INSTITUTE/ UNIVERSITY YEAR OF PASSING PERCENTAGE /CLASS / GRADE
M.Tech (Embedded Systems) ISQUAREIT
Mar-2011 3.2/4
Graduation(Electrical and Electronics Engineering)
ANNA UNIVERSITY
2008
60%
Higher Secondary (12th) BOARD OF INTERMEDIATE 2003
71%
Secondary School (10th ) STATE BOARD 2001 71%
SKILL SETS
Technical skills :
Programming Languages C
Platforms 8051,PIC, ARM
Protocols CAN, I2C,SPI
Tools Proteus 7.1, LAB V EW(learner),Orcad Capture, keil, MP LAB

PROJECT DETAILS
ACADEMIC PROJECT :
INTERNSHIP
Organization : OYSTER SOLUTIONS.
Title : CAN BASED ACCIDENT AVOIDANCE SYSTEMS
Tools : LPC 2129
Team Size : 1
Duration : 6 months
A laser radar and three ultrasonic sensors are integrated with the CAN bus to build the
In car network.
Architecture to prevent the collision of car on all directions.
1. The front-end sub system and
. 2. The side and rear-end sub-system are introduced.
For the collision avoidance on the side and the rear-End, the available ultrasonic
sensors with limited range and resolution are adopted
project1 :
Organization : International Institute of information Technology.
Title : Spell Check using C
Tools : C
Duration : 3 months (2009)
Team Size : 1
Description : In word processor and database applications spell checking is of greater importance,
the present Project gives us an basic idea how these applications are implemented
using the powerful ‘C’ language..
Project2 :
Organization : International Institute of information Technology.
Title : RFID based Class room attendance system
Duration : 3 months (2010)
Team Size : 3
Description : Reading the data from RFID card. Marking the attendance of students in class.
Updating the data Base accordingly. Generating the attendance in excel sheet. All
the above steps are done automatically when swiping the cards of the students is
done.
Project3 :
Organization : International Institute of information Technology.
Title : LM35 based temperature measurement system.
Team Size : 1
Description : In this project the temperature of the inlet ambient is measured. The signal from the
LM35 is conditioned and converted to digital form using ADC of the PIC Micro
controller. The temperature is displayed in the LCD and also transmitted to a remote
station using RF Technology.

Project4:
Organization : The National Small Industries Corporation Ltd
Title : INDUSTRIAL ROBOT.
Team Size : 3
Duration : 4 months (2008)
Description : The aim of this project is to develop a robot capable of performing to detect an obstacle
And change its directions automatically. It also performs precise and accurate
Operations such robot is typically used in process industries for sorting, assembling,
Inspection Robot consists of 2 wheels each wheel is independently controlled by
servomotor.
EXTRA CURRICULAR ACTIVITIES
- Practical knowledge on electronic components and circuits.
- Designed digital clock in my under-graduation 3rd year.
- The project that we did in our 1st semester got selected to the conference held at NTU.
- Attended a workshop on CAN at IsquareIT.
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4251355
Date & Time : 14th Jun 2011 11:11 AM (UTC)
IP Address : 59.164.105.71
Browser Info : Mozilla/5.0 (Windows NT 6.1) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30
Predicted Country : India