PDMS Piping Engineer : Resume CV

[Guest-IJT]

SAJID MUJIB SYED
E-Mail : sajid0617 AT rediffmail.com

Objective :
In quest of challenging assignments in Piping Design And Plant Engineering,
Petroleum And Construction Management with a reputed organization

Abridgement :
Technically accomplished professional with around 5 years’ experience in the areas of Project Engineering, Piping Design Engineering and Plant Layout. Presently associated with UHDE India Pvt. Ltd. Piping Area Engineer. Acquired hands on knowledge and practical exposure in piping, support, preparation of piping layout and vendor management.
Proficient at preparing of Preliminary Piping Studies, Equipment & Layout, Piping, Isometrics, etc. An astute engineer with expertise in swiftly ramping up projects with competent cross-functional skills and on-time execution.

Functional Skill Set :
- Following all project specification governing by general engineering specification in project.
- Responsible for implementing and preparing drawings with project specific.
- Gathering product specifications & designing and modifying /upgrading existing designs & detail engineering of piping systems.
- Study of pipelines as per P & ID’s and updating the same by making mark
up on P & ID if any change is done.
- Study of pipelines of various Equipment, Finalization of Nozzle Orientation of Equipments.
- Providing information of Equipment Foundation, Platforms & Structure to civil dept.
- Supporting as per stress requirement.
- Checking Isometrics According to PMS, P&ID & Study Drawing.
- Pipe Rack piping, Utility piping.Under Ground piping, etc. checking for
Accessibility, maintenance, support requirements and required flexibility
- Reviewing support drawings & finalize its type with stress departments.
- Preparation of BOM on the basis P&ID; coordinating and supporting with
- Creating layouts, design of all components & related other Works & interacting with team members.
- Vendor co-ordination if reqiired make relevant modifications in the same such as layout,Tiein locations etc.
- Maintaining documents related to Piping Isometrics, Plan, Equipment
Vendor Drawing and Equipment Data Sheets.

KNOWLEDGE PURVIEW :
- Pipe rack width finalization.
- No. Of levels & bent spacing arrangement.
- Access and maintenance concern for each item located within pipe rack area.
- Line routing arrangement on pipe rack.
- Battery limit arrangement and its considerations.
- Pipe flexibility and support.
- Structural consideration and loading.
- Basics engineering of piping system.
- Basic documents like P & ID’s, PFD, Isometrics, Equipment list, Line list.
- Plot plan, equipment drawings, and piping layouts.
- Piping material, layout, stress analysis.
- Relevant Codes and Standards.
- Pump Piping study.
- Column piping study.
- Fired heater piping study.
- Air cooler piping study.
- Cooling tower piping study.
- Heat exchanger piping study.
- Study of Compressor Piping (RGC and CENTRIFUGAL)
- Vendor management & Tiein location finalization.
- Civil co-checking and markup.

Employment Scan :
- Since Jul’07 with UHDE India Pvt. Ltd. Pune, as Supporting Piping Area Engineer
- Dec’05-Jun’07 with Accerete Water Tech Pvt. Ltd., Pune as Piping Engineer

Major Projects :
- Bharat Petroleum Corporation Limited (Continuous Catalytic Reformer).
(It is Expansion of BPCL Due To Euro IV Standards)
Scope of Project :- Equipment Layout, Piping Layout of 3000 Lines Civil, Electrical, Instrument Work.
Worked in Pipe Rack Design, Piping Layout, Equipment Access & Maintenance Design Activity.
Copressor,aircooler,heat exchanger,psv,control station,vessels,cooling tower piping study.

- Jayshree Caustic & Chlorine (Membrane Separation Technique), Gangam Orissa.
Scope of Project :- Equipment Layout, Piping Layout of 1050 Lines Civil, Electrical, Instrument Work.
Worked in Utility & Presses Units Piping Layout, Equipment Access & Maintenance Design Activity.
- Ammonium Nitrate Dry product, storing facility and offsite & utilities (600TPD)

Project for Deepak Fertilizer Ltd. at Taloja, (Mumbai).
Scope of Project :- Equipment Layout, Piping Layout of 450 Lines Civil, Electrical, Instrument Work.
Worked in Offsite and Utility, Presses Units Piping Layout, Equipment Layout.

- Vacuum Gas Oil Hydro-treating Facility ( Indian Oil Corporation Ltd. Vadodara Gugrat).
Scope of Project :- Equipment Layout, Piping Layout of 3000 Lines Civil, Electrical, Instrument Work.
Worked in Piping Layout, Equipment Access & Maintenance Design Activity. Utility Piping.

- Ammonia Transportation, Storage & handling facility for liquid ammonia for Deepak Fertilizer Ltd. at JNPT, Mumbai.
Scope of Project :- Equipment Layout, Piping Layout of 350 Lines Civil, Electrical, Instrument Work.
Cross Country Pipeline Of 4 KM From Jetty Terminal to Nava Seva Mumbai.
Worked in Offsite and Utility, Prosses Units Piping Layout, Equipment Layout.

Scholastics :
2005 B.Tech. (Chemical) from U.D.C.T. Amaravati
2007 Post Graduate Diploma in Piping Technology from V.I.T. Pune

Computer Aided Design Skills :
- Piping study in AutoCAD
- Working with PDMS Software (11.6)
- Review in NAVISWORK, Knowledge Of Caesar-II
- Preparation of special support drawings
- Preparation of special part drawings
- Developing & checking Nozzle Orientation Sheet, Piping Plan, Equipment Layout.
- Battery Limit Connection drawings in PDMS/AUTO CAD

[rb.narasimhan]

Experience :
Company : Keas control systems (I) Pvt. Ltd in Coimbatore.
Designation : Senior Design Engineer
Period : From Dec 2008 to Till date.

E-mail ID : rbn20111 AT hotmail.com & rbnarasimhan AT yahoo.com

Company : SRITECH in Coimbatore.
Designation : Design Engineer
Period : From August 2008 to November 2008.
Scope of work : Preparation of detailed drawing P&ID and Flow
diagram in piping

Company : CADD CENTRE in Trichy.
Designation : Senior CAD Engineer
Period : From April 2007 to August 2008
Scope of work : Teaching in AutoCAD, Pro-E, CATIA V5.

Company : Trio-technologies in Trichy.
Designation : Design Engineer
Period : From June 2002 to March 2007
Scope of work : Design of valves, ducts and Mechanical components
by using AutoCAD, Pro-E.

Company : Tamil nadu cements corporation in Ariyallur.
Designation : Apprentice Training.
Period : From June 2001 to June 2002

Company : S.A.S India Private Limited in Trichy.
Designation : CAD Designer
Period : From October 1998 to April 2000

Total Years of Experience : 11 Years

Technical Qualification :
Diploma in Mechanical Engineering in Thanthi Rover Institute of Polytechnic in Perambalur
Year of passing : April 1998.

Technical skills :
Having thorough knowledge on Design of piping system, Determination of Diameter and thickness (based on flow and strength). Shapes and tolerances, material selection concept (based on Temp and application), allowable stress, Piping codes and standards, Load and Load combinations, Stiffness and Flexibility analysis, Branch connections, Valves and fittings, Flange design concept, piping insulation design and selection concept. Applicable for piping, supports and restraints and spring selection concept. Allowable support span, Flexible supports, hangers, limit stop and guides. P & ID, Flexibility factors used in piping analysis.

Design and analysis of Piping system :
Piping flexibility analysis of piping system (power piping and process piping) including STATIC AND THERMAL FLEXIBILITY ANALYSIS. Design and selection of different types of SUPPORTS (HANGERS, TIES, STRUTS)
Project Involved

Unit 400 Expansion Project
Scope : Detail Engineering
Location : Saudi Arabia
Client : Cristal Global

Unit 600 Recovery of Ore and Coke
Scope : Detail Engineering
Location : Saudi Arabia
Client : Cristal Global

6th Line Oxidizer Expansion Project(Unit-300)
Scope : Detail Engineering
Location : Saudi Arabia
Client : Cristal Global
OCS-II Substation Project
Scope : E-House Modeling
Location : Thailand

Client : PTT
PUO Field – Protojoyo Fpso
Scope : E-house Design
Location : Offshore
Client : BLT Indonisha

Fpso Perojarl Cidade De Itajai E-House Package
Scope : 3 E-house Design
Location : Offshore Brazil
Client : Siemens Pte Ltd

Responsibilities Include :
Checking isometrics as per P&ID and material specification.
Drawing & Model special supports as required.
Checking Equipment & Piping layout.
Preparation of Nozzle orientation, clit information for vessels, tanks.
Making Piping & equipment layout on PDMS draft.
Drawn & checked Isometric with support & bill of material.

Expected skills in pro/Ewildfire :
Parametric and Feature based Modeling.
Exposure to Sketcher mode.
How tocreate Protusion and Cut features.
How to create pattern..
How to create Holes,Chamfer, Rounds,Ribs,and shells.
Create of Exploded Assembly Views.
How to create2D Views and Sections from 3D Models.
How to create detail the Drawing.
Create of Surfaces.
How to use other Sheet metal features.
Creation of Bend and From features.
How to Extract BOM Tables in Drawing.

Expected skills in CATIA :
Parametric Modeling.
Feature based modeling concepts.
Creating the sketch.
Sketch constraints.
Animating sketch constraints.
To create pad&pocket feature.
To create Multi pad& Multi pocket features.
To create placed features.
Editing features.
Using parts with surfaces.

Expected skills in AUTO CAD :
Basics of computers.
Basics of computer Aided techniques.
How to make 2d Drawings in AUTO CAD.
How to edit and modify AUTO CADdrawings.
Hatching utilities-Create&Edit.
How to dimension the entities on CAD.

Expected skills in PDMS:
Instrument Modeling.
Instrument Supports Modeling.
Cable Tray and Cable Tray Supports Modeling.
E & I all Modeling Works.

Computer skills:
STRESS ANALYSIS SOFTWARE : CAESAR II 5.0
Piping Design Software : PDMS
Operating systems : Windows 98/2000/XP/Vista.
Word Processor : MS Office 2000.
Package : AUTOCAD2D&3D, Pro –e WILDFIRE 4,