Electrical, Electronics Manager : Resume CV

[Guest-IJT]

Curriculum Vitae :
Shital Annasaheb Patil.
E-mail ID : -shital_patil4 AT rediffmail.com

Summary :
1 A position demanding experiences in commissioning & Maintenance of process plant.
2 Diploma in Electrical Engineering from L.E.S.polytechnic Sangli Maharashtra state, India.
3 Total 12 years of Sound experience in various fields of Maintenance.

A. From 4 April 2008 to till date :-
Working as an Executive Maintenance in Cosmo films ltd-Aurangabad Maharashtra, One of the leading BOPP films manufacturing company.
Responsible for Electrical & Electronic Maintenance of following machines
1 Fully automatic process control (SCADA- Based) machines from 3 & 5 layer DMT- France, ATLAS Primary & secondary slitters from UK.DCM-France PVDC Machine.
2 Monitoring & measuring instruments for utility section such as generator, chiller package, Air compressor, Air Handling unit (AHU), Thermic fluid heater system, RO (Reverse Osmosis) plant etc.
3 Maintenance & trouble shooting of AC- DC drives such as Telemeccanique (ATV31, ATV58F,ATV68,ATV71,rectivar 74 series)Eurotheriam-690,control-technique(mentor)
Siemens-420,440 AC drive.
4 Working in the of environment Telemeccanique-modicon, Siemens PLC such as ET-200S, 300,400 series.
5 Handling of 33kv/433V power substation, Timely carry out preventive maintenance of HT (ABB make), LT braker (L&T, Siemens), APFC panels etc.
6 Material movement planning and vendor liaisoning.
7 Maintaining of ISO documentation. (Working as an ISO and SA-8000 team
Member)
8 Working in the enviourment of SAP system.

B From 1 Dec.2005 to April 2008 :-
Working as a Engineer in IDMC (Indian Dairy Machine Company) Packaging division Ltd-Gujarat. Which is 100% subsidiary of N.D.D.B (National Dairy Development Board) .
- Responsible for the utility & Maintenance :
1. Automated process control machine from 3 layer W&H(Varex) - Germany Blown film plant, 8 color W&H (Novoflex)- Germany flexo printing machine, Titan(SR-7&SR-8)UK Slitting machine, Nordmeccanica (Super Combi)- Italy Lamination machine, Waterline (Rite bag)-Switzerland pouching machine.
2. Monitoring & measuring instruments like for utility section such as generator, chiller package, Air compressor, Air Handling unit (AHU), Thermic fluid heater system, RO (Reverse Osmosis) plant, Soft starter etc.
3. Trouble shooting the problem of machines, modifying the machine whenever there is unavailability of proper spares parts.
4. Involving in the installation & commissioning of new machines like Waterline pouching & Nordmeccanica lamination machine.
5. Handling (1250KVA) DG set, Power substation (11KV/440 V). 60 TR Grasso –Germany ammonia base Chiller package.
6. Breakdown & preventive maintenance of machines required for the manufacturing of various types of flexible packaging material.
7. Working in the environment of variable frequency drives(Siemens- Simovert VC & FC ) , Eurotheriam SSD 690 AC drives & DC drives(Analog 6RA22) , Servo motor drives(Parker SLVD, B& R Acopos 1090) , Lenze AC servo drive(EVS -ES9326) Telemacanique Altivar-31
8. Working with Siemens (ET 200S), B&R(2003 &2005)Balloff
9. Vendor development.
10. Maintaining minimum spare stock in order to run smooth operation of the plant.
11. Follow with purchase dept. for material Procurement.
12. Working with ERP (Enterprise Resource Planning) System.
13. To upgrade machineries by implementing advance technology.
14. Responsible for pest control & Fire Extinguisher dept.
15. Working with ISO 22000 for food safety management for HACCP (Hazard Analysis Critical control point).
16. Proper planning of manpower for optimal utilization of them.
17. Maintaining Machine History card & preventive maintenance schedule as per Machine manufacturer instructions.
18. To carry out Calibration of instruments on due date to process related instruments in the machines & weighing scales in order to know performance & accuracy for the same.

C From July 1999 to Nov 2005 :-
Working as an Electrical engineer in maintenance dept. of Finolex Cables Limited – Goa Division. A leading cable manufacturing company involves in production of various types of power and telecom cables. An ISO 9002 certified company. The major process involved in the production is bulk handling system, continuous and discontinuous process of different types.
- Responsible for Electrical & Electronic Maintenance of machines :
1. Automated process control machines from Nieoff – Germany, Nextrom – Switzerland. Divas Standard and Royal Extruder.
2. Monitoring & measuring instruments like generator sets, chillier, compressor, etc.
3. Trouble shooting the problems of machines, modifying the machines whenever there is unavailability of proper spare parts.
4. Involving in the installation & commissioning of new panels required for cable manufacturing machines, also motor control center (MCC), Power control center (PCC) panels
5. Handling (2700KVA, 625KVA) DG sets, Power station (33Kv/440v), overhead cranes etc.
6. Breakdown & preventive maintenance required for cable manufacturing machines.
7. Worked in environment of variable frequency drives (SIEMENS) & DC drives (SIMENS make 6RA24), and PLC (SIMENCE S-7 series).

8. Knowledge of utility section : (Compressor, Chiller, etc).
1. Maintaining and checking all the records confirming to the ISO standard.
2. Planning the preventive maintenance work according to the program.
3. Analyzing the breakdown cause of the machine and find out the proper remedies to eliminate the problem from its root.
4. Imparting training to the technicians.
5. Performing the inventory for the spares.
6. Planning for overhauling the machines.

D From June 1998 to Dec. 1998 :-
Worked in maintenance dept. of Cipla Ltd Kurkumbh (A leading pharmaceuticals company through Nova electrical Pune.)
1 Maintenance of pharmaceutical machines especially in flame proof area.
2 Maintenance of control panel such as PCC & MCC.
3 Maintenance of H.T. yard/Transformer/DG set.

E From January 1997 to May 1998 :-
Worked as a supervisor at Skey products, Pune (A leading machine lubricating pumps manufacturing company.)

1 Technical training Details :-
Effectively participate SIEMENS make 6RA70 D.C drives training at SIEMENS at MUMBAI.
- Responsible for the maintenance of all plant machineries.

- From June 1995 to July 1995 as vocational training :-
- Knowledge of HT capacitors. Worked in Q.C & testing dept.
Operating systems (Windows 98, Windows -XP)

[Guest]

CURRICULUM VITAE :
R.KOTHANDARAMAN
Email ID : rkraman_222 AT yahoo.com

Career Objectives :
To secure a challenging and responsible assignment that matches my education And abilities and provides scope for continuous improvement and helps me to contribute effectively to the goal of the organization.

Professional Qualification :
Degree : BE EEE (Part time), Sathyabama University, Chennai Jan 2009 to June 2012 % Marks : 76
Diploma : DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING (TP.E.V.R Government Polytechnic Vellore-2 Tamilnadu) Duration : 1996-1999 % Marks : 87.25

AREA OF INTEREST :
- Industrial Automation
- Control wiring for different logics or functions
- To addict with latest technology
- Day to day improvement of maintenance to prevent breakdown

Work Experience :
Concern Name : TULSYAN NEC LTD. (AUTOMATION STEEL ROLLING MILL) Gummidipoondi
Designation : Engineer - Electrical (Erection & Maintenance)
Duration : Jan 2007 to till date

Concern Name : POWER TECH CONSTRUCTION (P) LTD, CHENNAI
Designation : Electrical supervisor
Duration : Jan 2006 to Jan 2007

Concern Name : Tamilnadu gas fittings (P) Ltd, Gummidipoondi.
Designation : Electrical Technician
Duration : Jan 2003 to Jan 2006

Concern Name : TamilNadu Electricity Board, Chennai
Designation : Act apprenticeship trainee
Duration : Dec 2001 to Dec 2002

Work doing in TULSYAN NEC LIMITED, GUMMIDIPOONDI
I started my career in TULSYAN NEC LTD, from 22.01.2007 Erection of automized rolling mill from the beginning itself after erection operation and maintenance Equipment and Machinery in our plant
Transformer : 12.0MVA ,33KV/11KV 2.5 MVA, 11 KV /415 V 4.5 MVA, 11KV / 2*415 V

Induction motors : 0.75 KW to 1100 KW (DOL, RDOL, Slip ring starters used to start the above motors with remote control using PLC as well as Push button station)

DC Motors : 30 KW to 1300 KW (DCS drives used to start the above motor through SCADA with PLC (ABB Make), Codesys software programming language for PLC.Wonderware intouch for SCADA 300 KW 14nos, 63.5 KW 4nos, 30 KW 3nos, 150 KW 3nos)

EOT crane : 6 ton double girder 4nos, 6 ton single girder 1no, 10 ton Double girder 2nos

Instrumentation : Pyrometer, Pressure transmitter, temperature controllers with the use Of thermocouples

Compressor : 45 KW screw compressor (ATLAS COPCO), AC drive 45 KW Normal compressors
Work assists with our seniors while erection and now the preventive and break down maintenance of the above mentioned equipment and machinery

Personal Details :
Date of Birth : 22/02/1981
Gender : Male
Marital Status : Married
Language Known : English and Tamil ( Speak,Read and Write), Hindi (Speak)
Mother Tongue : Tamil
Nationality : Indian

Place : Gummidipoondi
Date :

Your’s truly,
(R.KOTHANDARAMAN)