Maintenance Manager (Mechanical) : For Thailand Power Plant

[pavoram]

We are on the lookout for a Maintenance Manager (Mechanical) for a Power Plant at Thailand. Candidate should possess BE with 15 yrs relevant experience. Interested candidates may reply to this thread or send mail to ramadoss.b@pavopower.com

[Guest]

Respected sir,
I am working as a manager(powerplant) in kenana sugars company in sudan.I want to work as a maintenence manager (mechanical) in your company.so please give me a chance.I attached my resume.

yours faithfully,
N.saravanan.

[mahi.kasana]

plz sir, i will give not even a single chance to make a mistake, plz sir i want this job, because its my dream to work in singapore

[Guest]

RESUME
KAMLESH SHAH
E-MAIL ADDRESS : kamleshshah14 AT yahoo.com ,
PROFESSIONAL QUALIFICATION
- B.E. Mechanical with Distinction passed from M.S. University, Baroda.
Summary of Skills & Experience : -
OVER 14 YEARS of experience in 90 MW POWER PROJECT – ERECTION / INSTALLATION / INSPECTION / TESTING / COMMISSIONING / CO-ORDINATION / FOLLOW-UP WITH CONSULTANT , CONTRACTORS & Maintenance of GAS TURBINE, STEAM TURBINE POWER PLANT of 90 MW (Installed capacity), COMBINED CYCLE COGEN POWER PLANT.
Objective :
- To be the part of a well-reputed organization, where my best abilities can be explored to achieve the organizational goal along with the height of my career.
Strength :
- To work within a team with commitment and leadership to achieve targeted out put by creating friendly and supportive atmosphere.
PROFILE SUMMARY :
- Forteen Years (Twelve years in India and 2 Years in Gulf) experience in Power Plant Industry.
- Passed BE (Mechanical) from the M.S. University of Baroda in the July 1994 with 67%.
Present Job Profile :
Presently I am working as Asst. Manager -Mechanical In Alghail Power Plant Under Ras Al Khaimah Investement Authority ,UAE for their 65MW Installed capacity Naphtha/Gas fired Open CYCLE - POWER PLANT. Having Two BHEL FRAME-VI (MARK VI Control system) GAS TURBINES with all plant auxiliaries those meet plant Operations.
Installation, erection & Commissioning of 65 MW Open Cycle Power Plant and retated to all Auxiliries.
Doing pre-commissioning checks, preparing erection and testing protocols and final commissioning of Mechanical equipment.
Follow up with supplier, Inspections of the equipment at their works including Hydro test as per our quality plan.
Past Experience (Total length AT 12 years) :
I was working with M/s Gujarat Alkalies and chemicals limited, Dahej, Dist. Bharuch, Gujarat, India have a captive Co-Generation power plant having –Frame 6 GE make Turbine – 02 nos., 30 MW capacity each and Anslado make Steam Turbine –01 nos., 30 mw capacity. Waste heat recovery units and auxiliaries and whole utility system viz. Raw water, Cooling water, Fire Fighting System, Compressed Air system
My Past responsibility :
- Planning and scheduling of major shutdown & preventive shutdown of Gas Turbine, Steam Turbine ,Heat Recovery Steam Generator (HRSG), Air Compressor, Cooling Tower & Other Auxiliaries.
- Spares planning and procurement of spares for Gas Turbine, Steam Turbine , Heat Recovery Steam Generator, Air Compressor, Cooling Tower & Other Auxiliaries.
- Also, Co-ordination with purchase department to make available all required spares at the time of shutdown.
- Preparation of annual maintenance budget & motoring of the same.
- Analysis of problem of repetitive nature and carrying out necessary modification for permanent solution.
- Preparation & evolution of tender for purchase of equipment / parts.
PROJECT :
- Installation, erection & Commissioning of 90 MW captive Co-Generation Power Plant and retated to all Auxiliries.
- Doing pre-commissioning checks, preparing erection and testing protocols and final commissioning of Mechanical equipment.
- Follow up with supplier, Inspections of the equipment at their works including Hydro test as per our quality plan.
Specific Achievements :
I would like to inform that I was deputed M/s. GACL witness the inspection of Gas Turbine at M/s EGT work’s essence Germany.
Active participant as execution of major inspection of Gas Turbine & Steam Turbine.
To Installed the Condensate Pre-heater In Heat Recovery Steam Generation System commissioning successfully.
TRAINING & SEMINARS : -
- Operation & Maintenance of Combined cycle Power plant” Conducted by Torrent Power AEC Ltd, Ahmedabad.
- Safety Engineering & Loss Control Management.” Conducted Central Labour Institute, Mumbai.
- National Seminar on Encon in Compressed Air System at Hyderabad
You will appreciate that looking to my qualification and experience, I will be the best choice for your requirement if given a chance, I will leave no stone unturned to win the confidence of my higher ups by hard work and professional approach.

[Guest]

RESUME
ROHIT VAGHAMSHI
EMAIL : rohitsorathiya AT GMAIL.COM
EDUCATION
GRADUATION :-BACHLORS OF TECHNOLGY & DIPLOMA
BRANCH :-MECHANICAL ENGINEERING
INSTITUTE :-JAGAN NATH GUPTA INSTITUTE OF TECHNOLOGY, (JAIPUR), UNDER RAJASTHAN TECHNICAL UNIVERSITY
EXPERIENCE
I HAVE EXPERIENCE OF 7 MONTHS IN THERMAL AFBC POWER PLANT CAPACITY OF 40MW. PREVENTIVE MAINTENANCE OF MATERIAL HANDLING SYSTEM, I.D FAN, F.D FAN, P.A FAN, ACW,RCW PUMPS, BFP, CRUSHERS, COMPRESSORS etc. PROJECT HANDLING OF BOILER CAPACITY OF 60TPH. I HAVE LITTLE KNOWLEDGE OF SAP & AUTOCAD.
QUALITIES
I CAN ADJUST ANYWHERE. SMART, GOOD IN COMMUNICATION, SELF-MOTIVATED, I HAVE HELPING NATURE, THINK MUCH & SPEAK LESS SMARTLY.
PERCENTAGE
EXAM YEAR INSTITUTE BOARD/UNIVERSITY PERCENTAGE
B.TECH IN MECH.ENGG. 2010 JAGAN NATH GUPTA INST. OF TECH. RAJASTHAN TECHNICAL UNIVERSITY 66.43%AGG.
DIPLOMA IN MECH.ENG. 2007 TOLANI FOUNDATION GANDHIDHAM POLYTECHNIC GANDHINAGAR TECHNICAL UNIVERSITY 60% AGG.
SSC 2002 SHANTIKUNJ GANDHINAGAR 74.71%
LANGUAGE PROFICIENCY
LANGUAGE READ WRITE SPEAK
ENGLISH Y Y Y
HINDI Y Y Y
GUJARATI Y Y Y
SINDHI N N Y
EXTRA CURRICULAR ACTIVITIES :
I HAVE PARTICIPATED IN ABHIVYAKTI PROJECT EXHIBITION IN 2008 IN JAIPUR
I HAVE ATTENDED ENTERPRENEURSHIP AWARENESS CAMP
I HAVE ATTENDED AUTOCAD COURSE
ADDITIONAL INFORMATION :
I LOVE TO RIDE ON BIKE AND LISTENING MUSIC & WATCH SOME SUSPENSE THRILLER MOVIES.I LIKE TO BUILD BODY; I LIKE TO READ SOME INTRESTING TOPICS LIKE “ERGONOMICS”
CURRENT SALARY : 1.8 Lacs P/A
EXPECTED SALARY : 2.5 Lacs P/A
SIGNATURE

[Guest]

RESUME
ASHISH ANAND
Email id : - ashish.mech.amtu AT gmail.com
CAREER OBJECTIVE
To excel in the field of Technology and be a part of the most enhanced technologies functioning in the industry, where there is scaling in learning and growth coupled which in turn would benefit the organization.
WORKING EXPERIENCE
COMPANY NAME COSMI COSMIC FERRO ALLOYS LIMITED.
Duration From 01 january 2011 to till date.
Designation joniour maintenance engineer.
Job profile Maintenance of whole plant like furnaces, hydraulic systems, pneumatic systems, pollution control, pumps, conveyors, etc.
COMPANY NAME SUPER SUPER PACK INDUSTRIES PVT. LTD.
Duration From 04 august 2010 to 10 november 2010.
Designation Service Engineer.
Job profile Installation and servicing of filling machines which was pneumatically controlled. Like liquid filling, granule filling, powder filling, pickle filling machines.
ACADEMIC QUALIFICATIONS
EXAM / DEGREE NAME OF INSTITUTE UNIVERSITY / BOARD PERCENTAGE
B.Tech. (mechanical)
(2006-2010) B.N. COLLEGE OF ENGINEERING, PUSAD AMRAVATI UNIVERSITY 66.85%
12th Board R.M.R.S, PATNA BIHAR BOARD 62.89%
10th Board MITHILA PUBLIC SCHOOL C.B.S.E BOARD 70.20%
PROJECT DETAILS
Project Title Analysis of Rail Using ANSYS 10.0
Platform ANSYS 10.0 and CATIA V5R14.
Description Aim of project was to study the static analysis of rail and the analytical approach, considering fixed static axle wheel load with variable rail speed. An actual rail profile was modelled in CATIA V5R14 software. It was then imported to ANSYS 10.0 software for analysis purpose. It was then imported to ANSYS 10.0 software for analysis purpose. First the rail of about 250 mm was subjected to a load of 22 KN with its base fully constrained. Then another analysis was focused on the stresses induced when there was contact between rail and wheel.
An analytic approach was done again to study the stresses induced Considering fixed static axle wheel load with variable rail speed.
INDUSTRIAL TRAINING
Topic Hot Rolling Technology
Company Steel authority of India limited (SAIL) Ranchi.
Description It wsa 21 days training with highlightes on practical knowledge of 2 high, 3 hight, 4 high rolling mills etc.
COMPUTER PROFICIENCY
- Designing and analysis software : - Auto Cad, Catia, Ansys.
- Operating system and software : - Xp, vista, win7, office, C- Language, etc.
ACHIEVEMENTS & EXTRA CURRICULAR
- Participated in National level Technical paper presentation on “Wap Flaro” held at B.N.C.O.E., Pusad (Maharashtra)
- Participated in Technical model exhibition on “Analysis of Rail” held at B.N.C.O.E., Pusad (Maharashtra).
- Participated in Work Shop on “Cryogenics, Hydraulic System, and Autodesk Inventor” held at I.I.T Bombay.
PERSONAL SKILLS
- Comprehensive problem solving abilities.
- Excellent verbal and written communication skills.
- Ability to deal with people diplomatically.
- Willingness to learn team facilitator hard worker.

[Guest]

dear sir,

plz do need full.