www.saipemtriune.in Saipem Triune Engineering Pvt Ltd Delhi : Instrumentation Design

[Admin]

Saipem Triune Engineering Pvt Ltd.
http://www.saipemtriune.in

Company Profile
Saipem Triune Engineering Pvt. Ltd. (STEP) is a Design Engineering & Consultancy Company focused on Oil & Gas Production & Processing (Offshore & Onshore), Petroleum Refining, Petroleum storage & Transportation, Chemicals & Petrochemicals.

Experience: 6 - 10 Years
Location: Delhi

Job Description
Detailed and Front end engineering for Oil and Gas projects mainly preparation of Instrument Index, Plc I/O list, Instrument datasheet,PLC /SCADA Specification, Vendor Selection,Technical Evaluation.
Knowledge of softwares like Instrucal/PDS/Intools Control Valve sizing Preparation of MTO(Material take off) Cable schedule (Instrument & Control) Hook up drawings, Juntion Box layout TB Interconnection drawings Cable tray and Air distribution drawings Logic drawings
F&G location Plan & Layout Material Requisition,Vendor Document Review
Control Philosophy

Desired Candidate Profile
The candidate should have minimum 6yrs of experience in design.
Candidates from oil and gas sector are preferred.

Email Address: recruit@saipemtriune.in

[Guest-IJT]

shaikh jameel ahmed
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
shaikh_jameel3 AT yahoo.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
instrument design
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
CURRICULUM VITAE
Post applied for : INTRUMENT TECHNICIAN / SUPERVISOR
Personal Information’s
Name : Shaikh Jameel Ahmed Shakeel Ahmed
Education Qualification :- :
Sr. No. Examination Institute / Board Year of Passing Percentage
1 S.S.C. Anjuman Islam Kurla Boy’s High school (Mumbai) March 2001 64.00%
2 Diploma in Instrumentation M.P.M.F. Polyth.((Mumbai) July 2006 56.08%
Computer Literacy :- Windows 98, 2000 2007, XP, MS Office, Internet,SAP in PM module.
PRESENT WORK EXPERIENCE :- I am currently working in RAY INTERNATIONAL at OMAN.This company is providing service & maintenance contract of chemical, petrochemical, oil & gas industry. Having experience in service & maintenance of various site through the company.
PRESENT WORK EXPERIENCE :- 1)M/s. PETROLIUM DEVELOPMENT OF OMAN (PDO) NIMAR PRODUCTION SITE as an INSTRUMENT SUPERVISOR.It is an oil and gas company.
PREVIOUS WORK EXPERIENCE :-
I worked in AL HUGAYET GROUP at KSA .This company is providing service & maintenance contract of chemical, petrochemical, oil & gas industry. Having experience in service & maintenance of various site through the company.
PREVIOUS EXPERIENCE :-
1) M/s. SAFCO at JUBAIL(KSA) as an INSTRUMENT TECHNICIAN it is a group of SABIC
It is a fertilizer company. having product of amonia & urea and the production is controlled by the DCS (yokogawa CS 3000 ).
I involved in loop checking, calibration, & troubleshooting, preventive and corrective maintenance activities of transmitters, sensors, valves, I/P, vibration switches, and maintenance of all electrical,electronics and pneumatic instruments and other process field instrumentation. I have knowledge in
ILD, P&ID. ESD(Triconex),PLC(Allen Bradely),Vibration System(Bently Nevada-3500)
Since 03th April 2010 to 10th December
PREVIOUS EXPERIENCE :-
2) M/s. PETROKEMYA at JUBAIL(KSA) as an INSTRUMENT TECHNICIAN it is a group of SABIC
I worked in petrokemya in olefins. It is a petrochemical company. having product of Ethane, Propane, Benzene, Butadine, & hydrogen and the production is controlled by the DCS (Honeywell TDC 3000 ).
I involved in loop checking, calibration, & troubleshooting, preventive and corrective maintenance activities of transmitters, sensors, valves, I/P, vibration switches, and maintenance of all electrical,electronics and pneumatic instruments and other process field instrumentation. I have knowledge in
ILD, P&ID. ESD(Triconex),PLC(Allen Bradely),Vibration System(Bently Nevada-3500)
Since 19th October 2009 to 25th March 2010
PREVIOUS EXPERIENCE :-
I worked in AUTOCAL SOLUTIONS Pvt. Ltd. at MUMBAI. This company is providing service & maintenance contract of chemical, petrochemical, pharma, oil & gas industry. Having experience in service & maintenance of various site through the company.
1) M/s. SANDOZ Pvt. Ltd. at MAHAD as an INSTRUMEN TECHNICIAN
It is a API pharmaceutical plant .having multipurpose product & the production is controlled by the two DCS (yokogawa CS1000 , micro excel). I involved in loop checking, calibration, & troubleshooting, preventive and corrective maintenance activities of transmitters, sensors, valves, I/P, vibration switches, and maintenance of all electrical,electronics and pneumatic instruments and other process field instrumentation.
Since 25th Agust 2008 to 15 july 2009
2) M/s. ONGC OFFSHORE at MUMBAI (HEERA & NELAM ASSET) as an INSTRUMENT TECHNICIAN. It is an oil and gas company.
I involved in loop checking, calibration, & troubleshooting, preventive and corrective maintenance activities of transmitters, sensors, valves, I/P, vibration switches, and maintenance of all electrical,electronics and pneumatic instruments and other process field instrumentation.
Since 23th Agust 2006 to 5th Agust 2008
NATURE OF JOB & WORKING EXPERIENCE:-
Maintenance Activities:
- ELECTRONIC PRESSURE TRANSMITTERS AP/GP/DP(SMART)(Rosemount,Yokogawa,E&H,Foxboro)
- TEMP TRANSMITTERS (SMART)(Rosemount,E&H,Radix)
- LEVEL TRANSMITTER (SMART)(D.P,Capacitance,Radar,Dispaser)(Yokogawa,Krohne,Rosemount,E&H)
- FLOW TRANSMITTERS (Mass,Vortex,Magnetic,Turbine)(SMART)(Rosemount,Yokogawa,Krohne,E&H)
- pH & CONDUCTIVITY TRANSMITTER(Mettler Toledo,Rosemount)
- I/P converters (Moore, Taylor, Yokogawa, ABB,Rosemount)
- PNUMATIC ( PIC,LIC,FIC, PT, FT,PDT)(Yokogawa,Foxboro)
- PID & ON-OFF CONTROLERS (ABB, Yokogawa.)
- CONTROL VALVE’S (R.K control, Pneucon, Dembla,Fisher,Masoneilan,SMART ARCA)
- Configuration and calibration of different types of SMART Transmitters using HART communicator (Rosemount 375 Series),Yokogawa(CA71, BT 200,YPC 4000 Series Portable Calibrator),(Fluke 744 series Portable Calibrator),Beamx(MC-2,PGXH),Scandura(MF-P,8000P4T2).
- Calibration or Checking of Mechanical level Indicator, Temp.Indicator,RTD Sensor, Thermocouple Sensor, Proximity’s, Pressure Gauges, Temperature Gauges, Switches (Pressure, Flow, Temp, Vibration), PRV and Safety valves.
- Operational knowledge of YOKOGAWA (Micro XL CS1000), (CS3000) & SIEMENS (PCS-7)
- Additional knowledge of SAP in PM module & Calibration Documentation.
JOB RESPONSIBILITY:-
- Installation & field calibration of general instrument
- Testing and commissioning of field instrument.
- Preventive & breakdown maintenance of process field and panel Instruments.
- Discussing technical specification & other details.
- Site visit & various test. Manpower handling
- Back office work like documentation & reports etc.
- Working Having experience and familiar with shutdown jobs, routine shitjobs,Preventive maintenance servicing, troubleshooting, loop checking,calibration and start up activities in fine chemical plant.
- Attend shift maintenance & emergency call on duty.
DOCUMENT WORK:-
- Maintaining Breakdown history of each Instrument
- Keeping update record of Calibration Scheduled
- Making list of critical spares parts
- Keeping all record of preventive maintenance Scheduled & Checklist.
RESPECTED SIR,
I assure you that above given information is true to the best of my knowledge.
Place: Mumbai
Signature

Date: (Shaikh Jameel Ahmed)

-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4127896
Date & Time : 13th May 2011 6:19 PM (UTC)
IP Address : 188.66.163.78
Browser Info : Mozilla/5.0 (Windows NT 6.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
Predicted Country : --

[Guest]

rashidmutech AT gmail.com
Rashid Rahman
CAREER OBJECTIVE
To achieve high expertise in the field of engineering with reputed
organization/consultancy in India & Abroad.
WORKING EXPERIENCE
TCE Consulting Engineers Ltd, Mumbai ( TATA Enterprise )
From : August 2007 till October ‘08
Designation : Asst. design engineer
1. Was associated with TCE Consulting Engineers Ltd, Mumbai, as a Asst. Design Engineer and engaged in design of Cable Tray layout & Preparation Of Instrument Plot Plans.
2. Successfully designed cable scheduling, Interconnection Schedule , Junction Box Termination Drawing & Air Header schedule.
3. Prepared Checklist For Nozzle Orientation.
4. Modelling Of Cable Trays, junction boxes, Tray Supports, Air Headers, Soft Boxes etc. in PDMS Software. (Plant Design Management System)
Client : EPPC Project, Egypt -UHDE India Ltd.
EDUCATIONAL QUALIFICATIONS

Rizvi College Of Engineering, Mumbai University ,Mumbai
- B.E Electronics Engineering - 2011 Result Awaited
Aligarh Muslim University, Aligarh, U.P
- Diploma In Instrumentation and Control Engineering with 76% - 2007
St. Mary’s School, Kolkata
- Secured 76.2% in H.S – ICSE Board- 2004
ACADEMIC PROJECTS

1. Unmanned Ground Vehicle based on Robotics – B.E
2. Speed Controller of dc motor – Diploma Final Year
3. Voltage level detector – T.E Electronics
4. Four bit comparator -- S.E Electronics

SKILLS/COMPUTER KNOWLEDGE

1. Computer literate and proficient with Microsoft Word, Microsoft Excel, Power point and Internet
2. Excellent in communication, organization and presentation skills.
3. Well versed with Plant Design Management System software (pdms)
4. AutoCad
EXTRA CURRICULAR

- Volunteered in college’s technical and cultural fests.
- Lead my class’ Cricket & Football team in intra college.


DECLARATION
I hereby declare that the above mentioned particulars are true to the best of my knowledge and belief .
Yours sincerely ,
Place : Mumbai
Date :
( Rashid Rahman )