Toyo Engineering India Ltd Mumbai, Delhi : Piping, Electrical, process, Instrumentation, Civil, CAD

[Admin]

http://www.teil.com

Toyo Engineering India Ltd (Toyo India) was established in 1976 by Toyo Engineering Corporation (Toyo Engineering - Japan). During early days, Toyo India was primarily supporting Toyo Engineering Japan for their Middle East and India projects. Today Toyo India is professionally managed corporate entity undertaking EPC, PMC or EPCM project assignments by leveraging it’s vast and varied experience, large pool of technically competent manpower, excellent office infrastructure and other requisite resources.

Toyo India executes medium and large size projects for Chemical Process Industry sector, predominantly for Oil & Gas and Petrochemical. The participation in such Indian and overseas projects, is either independently or through consortium approach in addition to the support to Toyo Engineering - Japan for their third country projects under Global Toyo operations.

Toyo India has the state-of-the-art Engineering Center and Project offices at Mumbai. All our engineering and project execution support departments are equipped with the latest engineering tools for smooth and timely completion of projects
It includes 2D and 3D modeling software (PDS and PDMS), industry standard process design software, engineering software, simulation software and all other tools and tackles.

Mumbai Toyo Engineering India Limited
E-Mail:sales@toyoindia.com (For sales enquires)
contact@toyoindia.com (For general purpose)
Tel.:+91 - 22 - 2573 7000
Fax+91 - 22 - 2573 7520 / 1

Toyo House,
Lal Bahadur Shastri Marg,
Kanjurmarg (West),
Mumbai - 400 078.
India.


Toyo Engineering India Limited
E-Mail:toyo-delhi@toyoindia.com
Tel. : (+91 - 11) - 4059 1240
Fax(+91 - 11) - 4059 1246 214,

Splendor Forum
Jasola District Centre, Near Apollo Hospital
New Delhi - 110 044, India

[Admin]

Below is the Job Information for the Job Code: PIP


Job Code: PIP

Job Description: PIPING DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Piping Engineer having degree / diploma in Mechanical / Chemical Engineering & having minimum 3 years experience in preparation of plot plan, piping layout, stress analysis & support design drawings, materials for process units of refinery, Petrochemicals, Fertilizer Plants & knowledge of International codes & practices such as ANSI, BS, API, IS.

[Admin]

Below is the Job Information for the Job Code: MECH-DSG


Job Code: MECH-DSG

Job Description: MECHANICAL DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Mechanical Designer / Draughtsman having 1-5 years experience in preparation of Equipment drawings of Pressure Vessels, Heat Exchangers & Storage Tanks. Familiarity with AutoCAD is essential.

[Admin]

Below is the Job Information for the Job Code: INST


Job Code: INST

Job Description: INSTRUMENTATION DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Graduates / Post Graduates in Instrumentation Engineering having minimum 3 years experience in Detail Engineering of Field Instruments, Control System and Construction Design. The candidates shall have experience in preparation of Data Sheets, requisition, bid tabulation, loops drawings, logic drawings, layouts, hook ups etc. and shall lead a team of Engineers. Candidates with experience on DCS, PLC, F&G system and Analyzers shall have added advantage.

[Admin]

Below is the Job Information for the Job Code: ELE


Job Code: ELE

Job Description: ELECTRICAL DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Graduate / Post Graduates in Electrical Engineering having minimum 3 years experience in basic and detail engineering involving preparation of SLD, Electrical Equipment Layouts, Cable layouts, Earthing layouts, Lighting layouts & Procurement services including Preparation of Enquiries, Technical offers evaluations, Vendor dwgs review etc. Knowledge of softwares, such as ETAP or EDSA will be preferred.

[Admin]

Below is the Job Information for the Job Code: CVL


Job Code: CVL

Job Description: CIVIL DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Graduate / Post Graduate in Civil Engineering with minimum minimum 3 years of experience in independent, designing of Industrial Building, R.C.C. / Steel Structures & Infrastructure Facilities for Industrial Plants. Candidates shall be proficient in the use of software like STAAD. Exposure to international codes of design like US codes, BS codes etc. will be an added advantage.

[Admin]

Below is the Job Information for the Job Code: FP


Job Code: FP

Job Description: FIRE PROTECTION DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Mechanical / Chemical Engineers having 5 to 10 years experience in Fire Protection (water/gas) system designing. Candidate shall have experience in preparation of Basic Specification, P & ID layout and have knowledge of TAC/IB/OISD/NFPA and other International standards.

[Admin]

Below is the Job Information for the Job Code: 3D CAD –CO


Job Code: 3D CAD –CO

Job Description: 3D CAD COORDINATOR

Position at: Mumbai Office

Job Description
Detailed: 3D
3D CAD COORDINATOR (3D CAD –CO): Candidate shall be a Mechanical / Chemical engineer with 5~8 years experience of which minimum 2 years as PDS / PDMS Coordinator. In-depth knowledge of Microstation, PDS / PDMS is must. Working knowledge of OS, Networking, AutoCAD, VB is advantageous. Candidate shall possess strong presentation & communication skills. Candidate shall be responsible for overall quality of 3D Model and deliverables by supervising all activities such as modeling, design review, clash-checking etc. Piping Engineers with 8-10 years experience as lead engineer / assigned engineer may also apply.

[Admin]

Below is the Job Information for the Job Code: 3D – DSG


Job Code: 3D – DSG

Job Description: 3D DESIGNER

Position at: Mumbai Office

Job Description
Detailed: Candidate shall have minimum 6 yrs designing experience in EPC projects. Candidate should possess in-depth knowledge of PDS / PDMS modeling. Candidate shall supervise the 3D cad operators and feed them with necessary input information.

[Admin]

Below is the Job Information for the Job Code: HSE


Job Code: HSE

Job Description: SAFETY ENGINEER

Position at: Project Site

Job Description
Detailed: Candidate should possess an engineering Degree/Diploma with additional qualification in Industrial safety from a reputed institution. Minimum 5 years experience in implementing safety requirements at construction sites of industrial nature is essential. Experience in Process/ operations/ commissioning/ Technical services, Hazop study, SIL Study and risk analysis will be an added advantage.

[Admin]

Below is the Job Information for the Job Code: CE( PIP)


Job Code: CE( PIP)

Job Description: CONSTRUCTION ENGINEER (PIPING)

Position at: PROJECT SITE

Job Description
Detailed: Graduate Engineers/ Diploma holders having minimum 5 years relevant experience in supervising and controlling construction activities in respective discipline. Responsibilities include planning, progress monitoring, quality control, monitoring activities of Subcontractors. Candidates having worked with reputed Construction Company/ Engineering Consultancy Company would be preferred. Selected candidates would be posted at various project sites in India and abroad.

[Admin]

Below is the Job Information for the Job Code: MECH (STAT)


Job Code: MECH (STAT)

Job Description: MECHANICAL DESIGN ENGINEER (STATIC EQUIPMENT)

Position at: Mumbai Office

Job Description
Detailed: Candidate shall have minimum 1-5 years experience in design, enquiry specification, vendor print review of columns, pressure vessels, heat exchangers, air cooled heat exchangers, atmospheric storage tanks etc. Familiarity with international design software is essential.

[Admin]

Below is the Job Information for the Job Code: MECH (ROT)


Job Code: MECH (ROT)

Job Description: MECHANICAL DESIGN ENGINEER (ROTARY EQUIPMENT)

Position at: Mumbai Office

Job Description
Detailed: Candidate shall have minimum 3 years experience in preparation of enquiry specification, data sheet, bid evaluation, vendor print review of process compressors / pumps, blowers, diesel engines, steam turbines, gas turbines etc.

[Admin]

Below is the Job Information for the Job Code: PIP - DSG


Job Code: PIP - DSG

Job Description: PIPING DESIGNER / DRAUGHTSMAN

Position at: Mumbai Office

Job Description
Detailed: Piping Designer / Draughtsman having minimum 3 years experience in development of plot plans, piping plans, isometrics & support drawings of refinery, petrochemical fields, etc.

[Admin]

Below is the Job Information for the Job Code: PRO


Job Code: PRO

Job Description: PROCESS DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Chemical Engineers with Graduate / Post Graduate degree and having 5 to 15 years experience in Basic, Detail Engineering activities including development of PFDS & PIDS, preparation of Process Data Sheet, Pump Hydraulics, Sizing of Flare Header, etc.The candidate should have the experience of above activities for refinery, petrochemical, fertilizers, cryogenic sector projects. Candidate with experience in conducting HAZOP Study / Plant Commissioning will have an added advantage.

[prabhat kumar]

Job Description: PIPING DESIGN ENGINEER

Position at: Mumbai Office

I am interested for the mention position.

[Guest]

aplication for piping engineer
presently working in larsen & toubro ltd ecc div 13 yrs exp. diploma in mech engg
mail i.d- arunava.mahapatra AT gmail.com

[pandit_monu]

Manish Kumar

9728944660

pandit_monu AT rediffmail.com


THERMAL POWER PLANT INSTRUMENTATION
Project Engineering, Erection, and Commissioning -2 year
O&M, DCS-----------------------------------------------2 year

RESUME TITLE:
Sr. Engineer (Instrumentation and Electrical) in thermal power plant of Aditya Birla group with 4 year years of experience.
pandit_monu is offline Add Infraction for pandit_monu IP Edit/Delete Message

[Guest]

I am Mr.dilip gohri PDS PIPING DESIGNER haveing 20 yrs exp. in oil and gas field.
i AM SEARCHING PERMANENT PDS PIPING DESIGNER JOB, IF YOU HAVE ANY VACANCY PLEASE CALL ME ON MY CELL NO. 9833757361/9820677412.

THANKS
REGARDS
DILIP D.GOHRI.

[rrahul0786]

RAHUL B-350, Jwala Puri,sunder Vihar,
New Delhi-110087
India.
Mobile: 09891162028
rrahul0786 AT rediffmail.com

Experience Summary:

Name of the Contractor / Concern : M/s. Sigma Engineers as a consultant of
M/s. Enmas Andritz (P).Ltd, New Delhi-70.
Period of Service : July-2006 to till date
Designation :Machenical Draughtman.

Project profile

M/S.Enmas Andritz (P) Ltd-New Delhi.

Project Title : The ABHISHEK INDUSTRIES LTD.,
Type of evaporator : Long tube vertical (falling film tubular)
Capacity : 170 TPH Water evaporation.
Description : Detailing for the bodies, piping & structure involved in Evaporator.

Project Title : Tamilnadu Newsprint and Papers Limited.,
Type of Project : NCG-LVHC
NCG handling & burning
Description : Detailing for piping drawings & layout.

Project Title : ABC Papers Limited.,
Type of evaporator : Long tube vertical (falling film tubular)
Capacity : 90 TPH Water evaporation.
Description : Drawn complete P & ID for evaporator plant
: Detailing for the bodies, piping & structure involved in Evaporator.

[pradeep.dubey85]

Plz find the below attached ply

[Guest Poster]

Piping Design Engineer having degree in Mechanical having 2years experience in preparation of plot plan, piping layout, stress analysis & support design drawings, materials for process units of refinery, Petrochemicals, Fertilizer Plants & knowledge of International codes & practices such as ANSI, BS, API, IS.Thanking you.
BEST REGARDS
VARUN THAKUR
email-pdsdesignengineer99 AT gmail.com

[prakashw123@]

Dear sir/madam,
I have interested as opening job title as per job code ----3D–DSG. that information as www.indianjobtalks link ,

My personal E-ID. punepraj AT ymail.com

Mobile no.9225795502 / 9765028088

[santosh_doati2006]

Dear sir/madam,
I have interested as opening job title as piping designer

[mrigen]

Sir/ Mam,

Kindly consider my application for the post of Process Design Engineer (Job Code: PRO).

Here is my brief profile:-

I am a Lead Engineer (Process Design) working in Oil & Gas sector currently employed with Indian OilTanking Design & Engineering Ltd. (New Delhi). My total experience is 6.5 yrs.+ and My present Job Responsibilities include:
1.) Process Simulation using HYSYS (Heat & Material Balance)
2.) Preparation of P&IDs(including Line Sizing) and PFDs
3.) Thermal Design of Exchangers using HTRI
4.) Preparation of Functional Specifications Document of various Packages and Equipments for Vendors and their Technical Evaluation & Comments.
5.) Flare stack Radiation calculations as per API-521.
6.) Equipment Sizing & datasheet preparation (e.g.- 2 phase or 3 phase separators, Water seal drums etc.)
7.) Process Datasheets for various Instruments in a project
8.) Equipment List preparation for a project
9.) Preparation of Pre-bid queries for Client with regards to a Project
10.) Surge Analysis using NATASHA PLUS wherever needed in a project
11.) Flare Network Simulation using FLARENET
12.) Preparation of Flaring and Blow-down Report including Flare Header Sizing calculations. This includes PSV load calculations and its Inlet/Outlet line sizing. Also, Dynamic Blowdown Calculations on HYSYS.
13.) Preparation of Cause and Effect Chart / ESD Philosophy
14.) SmartPlant P&ID Administrator


I have also worked with Saipem Triune India Pvt. Ltd. as a Sr. Engineer (Process Design) gaining considerable exposure on offshore projects (FPSO).

In addition to this, I have a prior Operations experience at Reliance Industries Ltd. (Olefins Plant) and National Fertilizers Ltd. (Ammonia Plant). (Approx. 2.5 yrs)


Education Qualification: B.E. (Chemical) (1999-2003) from “Deptt. of Chemical Engineering. & Technology”, PUNJAB UNIVERSITY , Chandigarh .

Kindly let me know where do I post/ attach my resume.
Regards.
MRIGEN FOTEDAR

[Guest]

To whom so ever it may be concerned,

Dear sir,
I have done diploma in electronics and was specialized graded 'A' in Engg drawing subject, i am currently going through to Mechanical draughtsman and piping course, except this i have done A- Cad from private class, i want to make best in piping field and want a good job in piping company, hope my sentences will reward me back from you
thanking yours
deepak devalia.

[Guest]

Toyo india just showing that they have projects.......... even though they have project but they dont take employee........

[Guest]

RAKESH Y. KHEDEKAR
dragon_thestar AT live.com
OBJECTIVES :
Seeking an entry level position where I can apply my knowledge and which provide benefits like job satisfaction and professional growth.
STRENGTHS :
Self motivated, young and enthusiastic with strong technical and analytical skills. Effective communicators, multitasking, work individually or as a part of team, strong organizational and time management skills, and ability to learn new tasks and concept abstractions quickly.
Educational Qualifications :
Degree and Year Institute Major and Specialization Remarks
Currently in Final Year (B.E.) Electrical Engg. Degree Course (2011)
S.S.P.M.’S College of engineering,
( University Of Mumbai),
Electrical
Appeared (sem VII-60.50%)
HSC V.W.A. HIGH SCHOOL AND JUNIOR COLLEGE, MUMBAI. PCMB SECOND class with 58%
SSC V.W.A. HIGH SCHOOL AND JUNIOR COLLEGE, MUMBAI.
-- First Class with 64.35%
Projects :
- LIVE Project on Designing, commissioning and installation of ACB (Air circuit breaker) test bench in L & T Powai.
In this project we made the automatic test bench to carry on long term, short circuit and instantaneous test simultaneously.
Co-Curricular Activities :
- Technical paper presentations :
- Participated in ‘National Level Technical Paper Presentation’ in PUNE.TOPIC-MICROBIOLOGY FUEL CELL.
- Participated in ‘National Level Technical Paper Presentation’ in Rajendra Mane College Of Engineering & Technology, Ambav (Ratnagiri)
- Participated in ‘NOVATEUR T10’ for quiz in Rajendra Mane College Of Engineering & Technology, Ambav (Ratnagiri)
- Participated in ‘NOVATEUR T10’ for snap up in Rajendra Mane College Of Engineering & Technology, Ambav (Ratnagiri)
- Summer Training :
- Completed vocational training in L&T SWITCHGEAR, POWAI for a period of one month.
- Visited SUZLON Wind power plant, GHATNANDRE.
- Visited KOYNA HYDRO POWER PLANT in CHIPLUN.
- Visited various POWER sub-stations.
Extra Curricular Activities :

- Being an active member as a vice president in Electrical Engineering Students Association(EESA).
Cultural Activities :
- Participation in dance, singing, drama, fashion show in KSHITIJ 06, 08, 09, 10.
Hobbies :
- Playing sports like football, cricket etc.
- Singing, reading and dancing.

[pradeep_oyur]

CURRICULUM VITAE
Name : Pradeep Sundaresan
Education : Diploma in Mechanical Engineering.
APPROVAL : Approved Hydrotest Engineer for Pipeline and Piping by
Petroleum Development Oman
: Approved Hydrotesting Engineer for Pipeline and Piping and Pressure Instrument Calibration by Saudi Aramco.
TRAINING : Permit Applicant (Mechanical)
(PTW-S course By NTI/PDO and assessed by OSO1N & OSO3N)
: Hydrogen Sulphide Awareness & Escape course
(H2S, by NTI / PDO)
: Job Hazard Analysis (JHA, by NTI / PDO)
: Self Contained Breathing Apparatus Authorized user
(SCBA, by NTI / PDO)
: Authorized Gas Tester (by NTI / PDO)
: Safety Leadership for front line Supervisors (SLS by NTI/PDO)
: Competence Mentoring and Coaching (CMC by NTI/PDO)
: Initial Fire Response (IFR by NTI/PDO)
: Naturally Occurring Radioactive Material Supervisors Training
Course (NORM-S by NTI / PDO)
: Chemical Handling Awareness for Supervisors
(CHA-S by NTI / PDO)
: European Foundation for Quality Management Workshop
(by EFQM Trainer Mr. Shawqi Sajwani)
: Pressure Measurement Calibration Technician Preparatory
Course (by Integrated Training Center, Dammam, KSA)
: Pressure Instrument Calibration Method (by Saudi
Arabian Engineering Company)
: Hazard Recognition Course (by Saudi Aramco Loss
Prevention)
: Certified Work Permit Receiver
(by Saudi Aramco Loss Prevention)
: Safety, Quality & Productivity (by Bechtel/ D.P.C)
: Safety Performance Recognition (by Bechtel/ D.P.C)
EXPERIENCE
April-2011 to Till Date : Al-Hassan Engineering Co.SAOG
(Petrofac Engineering & Construction, Kauther Depletion Compression Project, PDO)
Job Description : Senior Engineer Hydrotesting.
Responsibilities : - Procedure preparation for Hydrotesting activities
- Hydrotesting of on-plot piping.
- Internal cleaning of piping system by bursting discs
- Drying of piping system
Feb-2009 to March 2011 : Al-Hassan Engineering Co. SAOG
Nimr-C Full Field Water Injection Project (EPC Project)
PDO Site, Nimr.
Job Description : Senior Hydrotesting Engineer.
Responsibilities : - Preparation of all Procedures related to Hydrotesting.
- Hydrotesting of 6” Fuel Gas Line, 24” Water Injection line (PE Lined) and 18” Bulk Fluid Line (PE Lined).
- Valve integrity testing and pre-commissioning for 24” & 18” line.
- De-watering of pipelines.
- Drying and pre-commissioning of Fuel Gas Line.
- Testing by loops, valve integrity and pre-commissioning of On-Plot piping.
- Testing of GRE piping.
- Water Filling and Testing of two FWKO tanks
(15,000M3 fill volume and roof testing with air at 200 mmWC)

July 2008 –Jan 2009 : Al-Hassan Engineering Co. SOAG
(GS Engineering & Construction, Korea)
Sohar Aromatic Project, Sohar, Oman.
Job Description : Senior Hydro testing Engineer
Responsibilities : - Preparation of all procedures related to Hydrotesting.
- Testing of GRE piping and on-plot piping
- Water filling and testing of underground GRE piping for 26 Hrs.
- De-watering of pipelines.
- Calibration of Pressure & Temperature Recorder.
Oct 2007- June 2008 : SAUDI ARABIAN SAIPEM Ltd. (Saudi Aramco)
Khuraish Pipeline Project (Sea water supply for well)
Job Description : Hydro testing Engineer
Responsibilities : - Testing Procedure preparation.
- Testing of Valves. (60”Ø, 48”Ø, 24”Ø,16” Ø and smaller)
- Including ESD valve’s Functional testing.
- Hydrotesting of Pipelines.(60”Ø,48”Ø,24”Ø,16” Ø)
- Testing and Test report submission to Saudi Aramco.
- Drawing Preparation and Supervision of high pressure test header fabrication.
- Schedule making and Manpower distributing for Hydro test-ing.
Nov 2005 – Oct 2007 : SAUDI ARABIAN SAIPEM Ltd. (For Saudi Aramco)
EWG-1 Conversion to Sales Gas Project
Job Description : Hydro testing Engineer
Responsibilities : - De curding and Nitrogen Purging of 56’’Ø Pipeline (970 Km)
- Refurbishment of Scraper traps, Valves 56’’Ø and
Smaller.
- Designing of High Pressure Test Header.
- Assembly of Gauging and Bi-Directional Scrapers.
- Cleaning and Gauging of New Pipeline.
- Hydrotesting and Test report submission for
Revalidation and New Pipeline.
- Calibration of Pressure Recorder, Temperature Recorder,
Pressure Gauges and Pressure Relief Valves.
- De-watering, Drying and Layup of Pipelines.
- Testing of Valves. (56”Ø, 42”Ø,36” Ø and smaller)
Including DPE & SPE Function Valves.
Jan’05 – Nov 2005 : ESSAR REFINERY PROJECT
C/o UB Engineering Ltd. India
Job Description : Piping Superintendent (Site-in-Charge)
Responsibilities : - Fabrication and Hydro testing of Heater Coils.
- Erecting of Structural parts and Coils for Crude Discovery,
Units, Vacuum Discovery Units and Visbreaker Units and
Related Piping.

Feb 2004 – Dec 2004 : CHHATTISGARH ELECTRICITY BOARD
C/o BHEL (Bharat Heavy Electricals Ltd.)
Job Description : Pressure Part In-Charge
Responsibilities : - Dismantling of old Coils
- Erection of New Coils.
- Alignment, Fit-up and Welding of New Coils.
- Hydro testing of Pressure Parts up to 288 Kg/cm2.
- Acid Cleaning and Alkali Flushing for Pressure Parts.
Sep 2001 – Sep 2003 : SAUDI ARABIAN SAIPEM Ltd. (For Saudi Aramco)
AY-1 Pipeline Conversion to sales Gas Project
Job Description : Hydro test Coordinator
Responsibilities : - De curding and Nitrogen Purging of 48’’Ø Pipeline (962 Km) - Refurbishment of Scraper traps, Valves 48’’Ø and Smaller. - Assembly of Bi-Directional Scrapers.
- Cleaning and Gauging of New Pipeline.
- Water filling, Pressure Testing, Pressure & Temperature –
Recording of Revalidation and New Pipeline.
- Calibration of Pressure Recorder, Temperature Recorder,
Pressure Gauges and Pressure Relief Valves.
- De-watering, Drying and Layup of Pipelines.
- All size & kind of new Valves testing.
Nov 1999 – Mar 2001 : LINGTEC & BECHTEL International Inc.
C/o UB Engineering Ltd. India
Job Description : Lead Piping Supervisor
Job Responsibilities : - Erection, Alignment, Fit-up and welding of Boiler and
Turbine Piping.
- Hydro testing of Boiler, Pressure Parts and piping.
- Commissioning of Boiler and Turbine.
July 1998 – Aug 1999 : RELIANCE PETRTOLEUM Ltd. (Designed by Bechtel France)
C/o UB Engineering Ltd. India
Job Description : Piping –in-Charge
Responsibilities : - Fabrication of Flare Piping (102’’Ø, 84’’Ø, 72’’Ø and 60’’Ø)
- Erection, Alignment, Fit-up and welding of Flare Piping.
- Pneumatic Pressure Testing of Flare Piping.
- Knock Out Drum Modification.
May 1997 – July 1998 : BECHTEL International Inc.
C/o UB Engineering Ltd. India
Job Description : Lead Boiler Supervisor
Responsibilities : - Erection of Boiler Coils, Boiler Drum and Related
Piping.
- Alignment, Fit-up and Welding of Pressure Parts and
Piping.
- Hydro testing of Pressure Parts and Related piping.
Apr 1996- Mar 1997 : BRILLA CEMENTS
C/o. PETRON ENGINEERING Ltd.
Job Description : Piping Supervisor
Responsibilities : - Fabrication, Erection, Alignment and Welding of Structural
And Piping for Cement Plant.
Feb 1994 – Mar 1996 : KONKAN RAILWAY CORPORATION
C/o. Progressive Construction Ltd.
Job Description : Supervisor
Responsibilities : - Fabrication of Tunnel Arch Shutter and Bridge shutter.
Dec 1992 – Jan 1994 : SESA GOA Iron ore Plant.
Job Description : Maintenance Supervisor.
Job Responsibilities : Conveyer rectification, repairing of pipeline and piping.