Kaapro Management Solutions Pvt Ltd : Gurgaon

[muthukalee]

Company Name : Kaapro Management Solutions Pvt Ltd

Company Location : Gurgaon

Company Profile :
Kaapro is a full service HR consulting company promoted by highly motivated & experienced HR entrepreneurs from across the country.The promoters, in the immediate past, have been associated with a leading HR company in India and were instrumental in establishing that brand in their respective local markets. Each of them have over 6 years of hands on experience in Recruitment, All aspects of contract staffing including managing statutory requirements, Training, Search and Consulting. They bring with them efficient delivery of services and effective client management.

Services Offered :
* Recruitment
* Staffing
* Assessment
* Consulting
* Outsourcing
* Training
* Industry Verticals

Company Address :
Kaapro Management Solutions Pvt. Ltd
11/3, Crimson Park South,
Vatika City,
Gurgaon – 122002, Haryana, India.

Website : http://www.kaapro.co.in/

How to submit CV / resume : career@kaapro.co.in

Placement Agencies Gurgaon, Manpower Consultants Gurgaon, Staffing Companies Gurgaon

[chandeepkaurvirdi]

Hello,

I have just completed my certification in SAP Sales and Distribution Module and am looking for s sutable job. I have 8 years of domain experience, but no SAP experience.

Please advice if you also have SAP: Vacancies.

Thanks

Best Regards
Chandeep

[Guest]

Curriculum Vitae

M. PANDIYAN
E-mail maha_pandiyan AT yahoo.co.in
PROFILE :
Employment background reflects well over 14 years experience in Water Treatment Technical Operation and Maintenance.
Seeking a position, in an environment providing opportunities for application of acquired knowledge & offering prospects for career specifically in the field of Electrical Service and Maintenance.
QUALIFICATION :
Educational Qualification : S.S.L.C.
Technical Qualification : DEEE
License Details : B License Holder. No. 75194
Nature of work : Electrical Operation & Maintenance
110KV, 11KV, & 6.6KV, 3.3KV & WTP STP, RO PLANT, ETP& REFINERY, TTP
EMPLOYMENT HISTORY
Ion Exchange (India) Ltd.
Designation : Electrical Supervisor
Nature of Job : 110 KV Substations & 6.6KV Switch Gear
Duration : January 2012 till Date
Site : 5.8 MGD Desalination Plant (CPCL)
- Operating and maintenance of 110KV / 6.6 KV ( 16 MVA ) Power Transformer (AREVA)
- Operating and Maintenance of 6.6 KV/ 440 V Auxiliary Transformer (Voltec)
- Operation& Maintenance of 110 KV SF6 Breakers(ABB)
- Operation and Maintenance of Switch Gear H.T 6.6 KV VCB (Make ABB )
- Operating and Maintenance of 415 V ACB Rating of 2000Amps
- Control System and Field Motors testing both HT & LT up to 1000 kW.
- Monitoring and Controlling the 110 KV control panels & relay panels.
- Involved in fault finding and Relay resetting.
- Maintenance of the Station Battery System.
- Monitoring and correcting the power factor.
- Monitoring and preparing Log for Power Consumption.
AZALIYA WATER SERVICES LLC (VEOLIA & MUBADALA GROUPS) OMAN (Jan 2011 – Jan 2012)
Designation : Electrical Technicians
Site : Sohar Industrial Port Area
Client : MAJIS INDUSTRIAL SERIVCE (S.A.O.C) (Desalination Plant)
Company Profile :
TAKING DIRECT SEA WATER AND PRODUCING HYPOCHLORITE BY USING CURRENT TO CHLORINATE SEA WATER, THEN DISTRIBUTING IT FOR SOHAR INDUSTRIAL AREA. WHOLE PLANT IS MONITORED BY SCADA.
NATURE OF EXPERIENCE :
Operation and Maintenance of VFD Type : HARVEST A -10/130
- Load Testing and Commissioning of A11/130 Medium Voltage variable frequency Drive.
- Operation & maintenance of motor : capacity – 1925 KW
Make : BHEL. LTD
- Electro chlorination Rectifier Transformer : Make - MF , capacity -580 KVA
11 KV /120VAC
- Silicon Thyristor rectifier 150Vdc/2800ADC
- Generator Operation & Maintenance : Make – CUMMINS , capacity : 1500KVA
- 33 Kv/11Kv Operation and Maintenance of 20MVA Transformer : Make –TELK,&11Kv/0.433Kv Operation and Maintenance of 2.5 MVA Transformer
Make – Volt Amp ,
- Operation and Maintenance of 33 KV /11KV Substation Breaker (VCB)
Make – TAMCO and SIEMENS, Capacity : 630 Amps to 1250 Amps.
- Compressor Operation & maintenance : Make – ATLAS COPCO
Model : GA30, GA37
- Service & Maintenance of up to 55 KW Submersible pumps.
Make : Faggiolati Pumps, Flygt Pumps, Ritz Pumps and KSB Pumps.
- Operation and Maintenance of Process water Motor of 90 KW with VFD & Pressure Switch control.
- 30 MLD STP operation and maintenance ( Corrective, Preventive and Predictive)
- Bar & Band Screen : High & low Speed Motor maintenance
M/s AHMED MANSOOR AL AALI COMPANY. Bahrain.
(May 2009 to May 2010)
Designation : Electrical Operator & Electrical Supervisor
Client : ELECTRICITY & WATER AUTHORITY OF DESALINATION PLANT
NATURE OF EXPERIENCE: (130 MGD Water Forwarding Station)
- Testing & Commissioning of Motor and VFD.
- Operation and Maintenance of SCADA
- WEG 3.3KV motors up to 675KW.
- Siemens Robicon (Variable Speed Drives)
- Allen Bradley (PLC with SCADA)
- VAG -Valves up to 1200 mm diameter with AUMA Actuators.
- 11KV Substation and Plant Utilities
- MOV& FCV - Operation & Maintenance (SIMA & DCS)
- BPC, HP 200 SERIES (UPS) 6-10-15 KVA
M/s ELECTRICAL ENGINEERING SERVICES
(August 2008 to March 2009)
Designation : Electrical Supervisor.
Client : CHENNAI PETROLEUM CORPORATION LTD, MANALI, CHENNAI

NATURE OF EXPERIENCE:
- Technical Support, Maintenance, Service and Operation of Electrical Equipments.
- Preventive Maintenance &troubleshooting of LT&HT Motors - 1100KW.
- Operation & Maintenance of 110/6.6 KV Substation maintenance.
- Operation and maintenance 12.5 MVA Transformers.
- Servicing of Motors and Associated Components &Motor Operated Valve.
- Maintenance of MCC&PCC Panels (Make: L &T, Siemens & (NGEF).
- Maintenance of Battery Bank Charger Panels.
- Maintenance of Lighting System comprising of Sodium and Mercury vapor lamps etc.
M/s VATECH WABAG LTD, QATAR
(September 2007 to July 2008)
Designation : Electrical Technician & operator in O&M (INTERNATIONAL POSTING)
SITE : Doha, 110 MLD SEWAGE TREATEMENTMENT PLANT With SBR technologies
Client : ASHGHAL
(Drainage operation & Maintenance Assets Affairs)
NATURE OF EXPERIENCE:
- Maintenance work Taken. (Electrical motor up to 1100kw and Control panel specially VFD, SOFT STARTER).
- Maintenance of 1600 KVA Transformer and 1600 KVA D.G Set.
- Maintenance of L &T makes LT Circuit Breakers rating from 800A to 2200A
- Preparation of Log sheet.
- Preventive maintenance taken in centriguge (westfalla Separator Made in Germany).
- Maintenance of SBR & SAS Air blowers (400 &232 kW)
- Maintenance of 2000kg -6000kg crane bus bar controls.
- Maintenance of Inlet motors (Screen, Brush, Compactor & Grit classifier)
- Maintenance of Surface aeration Air Blowers – 132 kW
- Maintenance of Submersible Pumps up to 55kW.
M/s VATECH WABAG LTD.
(November 2005 to September 2007)
SITE : 300 MLD Water Treatment Plant - Red hills.
Designation : Electrical Technician
Client : Metro Water
NATURE OF EXPERIENCE:
- Maintenance and operation of HT Breaker MOCB servicing and relay test make: M/S. Eswaran & sons Engineering ltd
- Maintenance and operation of ACB Breaker
- Make: M/S. controls switch Gears Company
- Maintenance and Operation 11KV/3.3KV transformer rated 3250 KVA Make: M/s.Thana Electrical Co.Ltd.,
- Maintenance and Operation VCB, make (M/s. Jothi Ltd)
- Maintenance and Operation of 3.3KV motors 6 Nos. Rated capacity 535HP (400KW) starter (ATS) auto transformer starter rated capacity 535HP and Make: M/s. matter plattle Ltd.
- Maintenance and operation of 750mm Valve Actuator Motor Valve
- (Open close Controls system)
- Operation and Maintenance HT DG 11KV DG Rated capacity 1525KVA, Air started method. Engine Make CKD motors.
- Operation and Maintenance of 11KV/440V transformer rated KVA 1250KVA make M/s. Indo Tech transformer engineers.
- Operation and Maintenance of 180KW (250HP) and ATS starter operation with Actuator motors maintenance.
- Operation and Maintenance for 625KVA Genset
- Make: M/s .INTEG Company Engine PATHER Alternator, LT Breakers ACB controls switch Gears Company Ltd.
- Operation and Maintenance for 2000Kg crane Bus Bar, Long travels motors slipping induction motors and Controls Panel maintenance.
M/s GURIGRA ELECTRICALS PTE LTD IN SINGAPORE
(January 2003 to November 2005)
SITE : Changing Water Reclamation Plant Project
Designation : Electrical Technician
M/s SRI MURUGAN ELECTRICALS,
(January 2002 to December 2002)
SITE : RANE BREAK LINING LTD
Designation : Electrical Technician in Project and O&M
M/s. S.R.F. Ltd.
(July 2000 to January 2002)
Designation : Electrical & Mechanical Technician

M/s RANE BREAK LININGS LTD.
(March 1999 to March 2000 - One Year Apprenticeship)
Designation : Electrical Technician in Maintenance.
M/s SRI MURUGAN ELECTRICALS
(September 1996 to January1999)
Site : RANE BREAK LINING LTD
Designation : Electrical Technician

Place: (M.PANDIYAN)
Date :

[Guest]

Chandra Shekher Singh Rana
chandrashekher AT indiatimes.com

Career Objective : Looking forward to work in a challenging, interactive & learning environment where I can make significant contribution to the organization in the form of my dedication by using my skills and knowledge.
EDUCATION QUALIFICATION :
- Post Graduate Diploma In Plastic Engineering & Technology from CIPET Hyderabad with 76% in the year of 2007
- Passed Bachelor of Technology in Chemical Engineering, from U.P.Technical University, Lucknow (U.P.) in the year of 2006 with 61.26%
- XII from U.P. Board of Secondary Education, Allahabad, U.P. In the year of 2001 with 50%
- X from U.P. Board of Secondary Education, Allahabad, U.P. In the year of 1999 with 57%
COMPUTER EXPOSURE :

- Much familiar with MS Office (Word, Excell & PowerPoint)
- Having good knowledge of ERP (Empro) and basic knowledge of SAP.
WORKING EXPERENCE :
- Currently working with Krishna Maruti Limited, Gurgaon a TS16949 certified company and joint venture of Maruti Suzuki India Limited from August 2010 till date as Sr. Engineer.

CUSTOMERS : Maruti Suzuki India Limited, Suzuki Powertrain.

- Worked with Motherson Sumi Systems Limited, a TS16949 certified company as an Engineer in Production Department from September 2007 till
August 2010
CUSTOMERS : - Maruti Suzuki, Chrysler, Dodge, Nissan Motors, Suzuki Powertrain, Whilpool of India Limited, Antonio Carraro, Continental, Siemens.

JOB PROFILE :
- Expert in injection molding machines from 50 T-2800 T machine range.
- Molding of Raw Material like Nylon 6/66, PC, PVC, ABS, PC+PBT (Xenoy), HIPS, GPPS, PE, PC+ABS, Polypropylene Co polymers, etc. through Injection Molding.
- Working with Arburg, Battenfeld, Engel, Borch, FCS, L&T, Fanuc, Cincinnati
Milacron, Demag, JSW, Toshiba Molding machines.
- Ensuring quality in production. Initiate corrective actions to solve quality
problems in production.
- Meeting machine-wise, article-wise and performance targets.
- Maintaining all process parameters of machine and equipment as per the
instruction from time to time to control rejection rate below the norms.
- Minimizing the possibility of machine break down by timely intimating
Maintenance Department.
- Maintaining all Quality relevant records and documents.
- Troubleshooting of problems in injection molding.
- Responsible for achieving the production target as per PPC plan.
- Set-up time reduction, In-house & rework reduction.
- ‘5S’ improvement,
- Daily manpower deployment as per PPC plan.
- Consumables cost saving
- Good knowledge of Air Intake Manifold and its Assembely.
PREVIOUS WORK :

- Worked successfully on SMED and Cycle Time Reduction activities.
SPECIALITIES :

- A competent professional with over 4 years of cross functional experience
in managing a wide array of operations entailing production.
- Expertise and sound knowledge of various molding processes viz.
Injection Molding, Blow Molding.
- Proficient in spearheading operations and taking cost-saving initiatives to
optimize efficiency of machines and enhance productivity.
- Expertise in implementing cost saving measures to achieve substantial
reduction in terms of man-days, operational cost, raw materials, logistics.
- Adequate good knowledge of plastic raw materials.
- Conversant with the concept of JIT, Kaizen.
- Possess basic knowledge of statistical quality tools-Pareto Chart ,
Flow charts, Fish Born Diagram, Histogram etc.
- An effective communicator with excellent interpersonal and relationship
management skills.
ENGINEERING TRAINING :
ENGINEERING TRANING :
Undergone Engineering Training in Indian oil Corporation limited, Mathura (U.P.) in the year of 2005
AREA OF INTEREST :
HEAT TRANSFER : Heat Exchangers.
MOLDING PROCESS : Injection Molding.
CHEMICAL PROCESS: Distillation Process, Reactors, Valves.