www.fonecare.net.in Fone Care Training & Services Pvt Ltd Chennai : Mobile Phone Repair Technician

[Admin]

fonecare.net.in
Mobile Repair Technician :
Diploma (ECE, Electronics), B.Sc. / M.Sc. (Electronics), ITI (Electronics) with 2-3 Years experience in Multibrand Mobile Phone Repairing.

Candidates must have knowledge in Phone Hardware and Software level Repairing and should have sound knowledge in Flashing Interface Tools like JAF, UFS, Infinity Box, Universal Box, Spiderman, SETool etc.

Salary will be best in the industry with incentives.

Senior Faculty :
B.E. (Electronics, ECE), Diploma (ECE, Electronics), M.Sc. / B.Sc. (Electronics) with sound knowledge in Mobile Phone Repairing and Good communication Skill.

Candidate must have interest in teaching students and have experience in the same field would be preferable.

Candidates must have knowledge in Phone Hardware and Software level Repairing and should have sound knowledge in Flashing Interface Tools like JAF, UFS, Spiderman, SETool etc.

2-3 Years experience in chip level repairing is must for this position.

Salary will be best in the industry with incentives

Academic Counsellor :
Female with 2 to 3 years experience in course counselling and excellent communicational skill in English & Tamil.

Should have strong convincing power to convert inquiries into admissions for the training courses.

The Remuneration will be based on the candidates’ ability and experience + incentives.

Marketing / Sales Executive :
Young, Energetic graduates with sales aptitude and 2-3 years experience in sales / marketing.
Freshers may also apply.

Salary will be best in the industry with incentives.

Content Developer :
Graduate with 2-3 years experience in Content development especially sound at creating power point presentation.n.

Apply here : http://www.fonecare.net.in/careers.php

Fone Care Training & Services Private Limited
No.3/3, IInd Floor,
Gift of Jesus Building,
Mahalakshmi Nagar,
Karambakkam,
Porur,
Chennai-600116.

[Guest-IJT]

CURRICLUM VITAE


RAJEEV KUMAR Contact No. +918804576859
Type-II,TTS, NTPC Ltd.
Kahalgaon Super Thermal Power Project,
Kahalgaon, Bhagalpur,Bihar
Pin – 813203
Mail Id-rajeev.chauhan282 AT gmail.com
rajeev2007.966 AT rediffmail.com

Objective A responsible and challenging position that will allow me to explore my capabilities, skills and sense of dedication towards my duties with a sole aim of seeing the progress of the organization.

STRENGTH: I am capable of under stress, meeting deadlines without compromising on quality and willingness to take extra responsibilities when needed. I work well in a team Environment and individual assignment. I have been successful in meeting new technical challenges.
Professional Summary
- Having 6+ years experience as a Mechanical Engineer.
- Responsible for Leadership in Mechanical Erection & commissioning .
- Worked in Teams and can be part of Value addition for the Organization.

DESIGN INDURE GROUP
Experience (March 2008 to till date) :-
Manufacturers and suppliers of complete range of reliable Ash Handling Equipments &
Developers of Reliable Ash Handling Systems in India and abroad since 1970.
1- Ongoing Technical Collaboration with Allen Sherman Hoff, USA
2- Indigenization of the Ash Handling Systems since 1970
Components Pioneers in Ash Handling in India
3- No. 1 In the World Leader in terms of Quantity of Ash Handled
Holds Over 70% of Market Share In India
4- 152 Plants Installed for more than 37000 MW Power Plants in
India and abroad
Role & Responsibility: Worked with The Indure Pvt. Ltd. as a Mechanical Engineer on Ash handling package project of Different Thermal power plant .
Company Experience
Three Year working experience in MACAWER BEEKAY PVT. LTD. (A BEEKAY GROUP COMPANY ) Which is a joint venture company having technical collaboration with M/S Clyde Bergmann Material Handling. U.K. Deal in Turnkey project of Ash Handling System. Manufacture Dense Phase Pneumatic material Conveying for Power Plant, Steel plant & Cement Industries.
- Responsibility: Fabrication , Erection and Commissioning of Ash handling system, Mill Reject Handling System & Dense Phase Pneumatic System.
- Coordination with Client inspection agencies like NTPC etc to clear our fabrication & Erection as per approved QAP/IR .
- Coordination with the contract at site for the modification if needed with inspection clearance from client/inspection agencies etc.

- To certify erector contractor bills and to keep all important document update at site
- Organize Inspection of materials at works site by client.
.

Site Experience:

- Fabrication, Erection and Installation of ASH HANDLING SYSTEM, ether Wet or Dry mode, Mill Reject Handling System & Dense Phase Pneumatic System.
- Fabrication & Erection of pipe rack, bridge for pipe line & other supporting structure of Building & Equipment.
- Erection & Commissioning of the Equipments like Adaptor, MHV, KGV, Collector Tank, Air washer Wetting Head, Vacuum Breaker, Seal Box Expansion joint, Flushing Apparatus , buffer hopper, Bag filter, Airlock Tank, Rotary feeder & ash storage silo etc.
- Erection of Air Receiver, Air Dryer, Compressors for Instrument & Transport Air.
- Bottom Ash Hopper: - Erection of Bottom Ash Hopper, Seal trough, Inspection Windows, BAH flushing nozzle feed Gate, Clinker Grinder, Jet Pump(Hydro ejector), Seal Box, Air-Oil Converter Tank, etc.
- Erection of MS pipe for water line, Basalt Pipe for slurry line, C.I Pipe for fly ash extraction & transportation line, GI Pipe for Instrument Air line, Ash slurry disposal pipe line including Fitting of valves, strainers etc.
- Erection & Commissioning of the following Pumps:
1) Clear Water Centrifugal Pumps - BAHP, FAHP, BALP, Sump makeup,
Flushing water pump, HMDC etc.
2) Slurry Duty Pumps – Ash Slurry Disposal Pump with fluid coupling & Gear
Box, BAH Over flow pump, Drain pump, Slug Pump etc.
3) Vacuum Pumps for Evacuation of fly ash to ESP, Fluidizing air Blower
- To make erection bills and to keep all the important document up to date.
- To check the bills raised by the contractor and send it to Head Office for payment.
- Checking & inspect the material as per FQP at site.
Project Associaed:
1. Erection and commissioning of Ash handling system for ( 4X210 MW) JAY Prakash Group N.T.P.C Tanda.(U.P) .
2. Erection & Commissioning of Mill Reject Handling for (210MW) N.T.P.C. Unchahar.(U.P).
3. Erection & Commissioning of Mill Reject Handling for (500MW) N.T.P.C. Ramagundam. (A.P
4. Erection & Commissioning of Ash Handling System for (3x500MW) N.T.P.C. Kahalgaon. ( Bihar )

Professional Qualification:
Diploma in Mechanical Engineering from institution of Mechanical Engineering Mumbai India in YEAR 2005.

EDUCATION QUALIFICATION:

Inter passed from R.S.M. Inter Collage Dhampur in U.P. Board Allahabad.
High School passed from Inter Collage Jumana Kash in U.P. Board Allahabad.

Computer Skills:

Operating System Windows 98, 2000, Xp. W (98, W (98, XP&2000).
Application package MS-Office

Personal Details:-

Father’s Name : Sh.Vijender Singh
Date of Birth : 10-04-1984
Permanent Address : At- Post – Bibra Khurd
Distt- Amroha (U.P Phone No. 9973250064
Sex : Male
Marital Status : Married
Nationality : Indian
Languages Known : English

It is certified that all information mentioned above are correct to the best of my
Knowledge.


(RAJEEV KUMAR )

[Guest]

dear,
sir, I am mobile phone technician, i have 4 year experience in mobile