Great Consultancy Group : Mumbai

[muthukalee]

Company Name : Great Consultancy Group

Company Location : Mumbai

Company Profile :
A company with Global operations, Great Consultancy Group acts as a conduit between the organizations and the job seekers. We offer highly suitable placements ensuring success for employees as well as the company. Great Consultancy Group boasts of an impressive network in many countries and territories enabling us to meet the needs of our large customer base, including small and medium size enterprises in all industry sectors, as well as the largest multinational corporations.

Services Offered :
Temporary Recruitment
Permanent Recruitment
International Recruitment
Custom Staffing Outsourcing
HR Assessment
Training and Education

Company Address :
Great Consultancy Group
401, Suleman Arcade, 4th Floor,
Behrambaug Road, Jogeshwari (w)
Mumbai, Maharashtra. INDIA.
PIN : 400102

Website : www.greatconsultancy.com

How to submit CV / resume : http://www.greatconsultancy.com/jobs/

Placement Agencies Mumbai, Manpower Consultants Mumbai, Staffing Companies Mumbai

[Guest-IJT]

Name : RAHUL RAJU
Email : rahulraju07 AT gmail.com
Designation / Skillset : Electrical Engineer
I am working as Site Electrical Engineer in AL-Gihaz co Ltd KSA. I have 4 years of experience in the field of Erection and Installation of all Electrical Equipments in Substation up to 132 KV

Resume :
OBJECTIVE :
To fulfill the organization Demand and to stand up to challenge that comes my way with my skill and knowledge in Power system.

ACADAMIC QUALIFICATION :
Bachelor of Engineering in Electrical and Electronics from Anna University, Chennai in May 2007
EXPERIENCE DETAILS : (4 YEARS OF EXPERIENCE)
Employer 1
Organization : Quilon Consultancy Services, kollam, Kerala, India
Period of Job : May 2007 to June 2009
Designation : Site Engineer
Nature of Job : Erection of EHT Substations
Employer 2

Organization : AL-GIHAZ COMPANY LIMITED, Riyadh, Saudi Arabia.
Period of Job : June 2009 to Till Date
Designation : Site Engineer
Nature of Job : Erection of EHT Substations
Projects Worked : 1) 132/33/13.8KV Baish S/S, Jizan.
2) Reinforcement of 132/33/13.8KV Sabya S/S, Jizan.
3) Reinforcement of 132/33/13.8KV Jizan Town S/S, Jizan
4) 132/13.8 KV New Jizan Industrial S/S & 132 KV DC Transmission Line
From kudmi to New Jizan Industrial S/S, Abu Arish
Client for all Projects : Saudi Electricity Company (SEC)
Current Project : 132/13.8 KV PSA-2
Client for projects : SWCC(SALINE WATER CONVERSION COOPERATION)


PROJECTS PROFILE :
- Installation, Testing and commissioning for new sub Stations with 2 Bay 132kv Double as well as single Bus bars, 132KV Switchgear Bays for Transformer, Bus Sections and Feeders, 2 winding Transformers(132/13.8KV,60or25MVA), 13.8KV Switchgears with Auxiliary Transformer
- Replacing of 2 winding power Transformers (132/33KV, 73MVA) By 3 winding Transformers(132/33/13.8KV, 133MVA) with new 13.8kv SWGR, Transformer Protection and AVR panels,
- Installation of (3) 2 winding Transformers (132/13.8KV, 50/67MVA), 13.8 KV (3) Capacitor Banks (7 MVAR), 132 KV GIS with double bus single breaker system, 13.8 KV SWGR with ABTS and all its Protection & Control Panels.
ACADEMIC PROJECT :
Project Title : PWM BASED CHOPPER DRIVE FOR A STEPPER MOTOR
Company : SIMPLETECH INSTRUMENTS PVT LTD
Bangalore, India

PROFESSIONAL EXPERIENCE :
Erection & Installation of following :
- Three (3) 50/67 MVA, ONAN/ONAF (OA/FA), Dyn1, 132/13.8kV, 3-phase, 60 Hz, 22% impedance AT 50 MVA base, oil immersed power transformers with +10% to -20% OLTC, with 132kV bushing CTs(for metering) and three (NER) neutral grounding (800A/10- ) complete with RTCC cabinets, all accessories. The transformers have bushing type, 2-core CT (one core with single ratio and the other core with multi-ratio) mounted at 13.8kV neutral
- Six (6) outdoor station class arresters rating 120 kV for D/C- T/L
- 132 kV, indoor, (GIS), 2000A, 1Sec, 40KA, switching devices and other associated electrical equipment, consisting of the following:
1. Eight (8)-132kV, 2000A, 1 sec, 40kA, peak withstand current 2.6 times short circuit rating (104KA), 3-phase, 60 Hz, indoor, SF6 circuit breakers.
2. Twenty three (23) 132 kV, 2000A, 1sec, 40kA, l04kA peak momentary current, 3-pole, 60 Hz, disconnect and grounding switches.
3. Eighteen (18) 132 kV, 1-phase voltage transformers (VT) for two (2) lines & four (4) buses.
4. 132 kV, 2000/1A current transformer with multi-ratio taps (MRCT), Five (5) cores minimum for each C.B.
- Three (3) 13.8kV, 7MVAR shunt capacitor banks with 2 mH series detuning reactor. Each capacitor bank designed to attain a "net" value of 7MVAR AT 1.0 p.u. at the 13.8kV bus.
1. Detuning Reactors
Installation of nine (9) numbers air cored detuning reactors of 2mH, three (3) for each capacitor bank, complete in all respects and installed in naturally ventilated.
2. Capacitor units
Installation of rack mounted, capacitor units in 3x13.8kV banks, each bank of 7Mvar capacity at 13.8kV, arranged in Y-Y arrangement with ungrounded neutral, with free standing neutral CT.
- 13.8kV, 25kA, 1sec, peak withstand current 2.6 times short circuit rating (65KA), indoor switchgear with SF6 or vacuum circuit breakers with ABTS consisting of the following:
1. Three (3) 3600A breaker cubicles for incoming circuits from power transformers T1, T2 and T3, with nine (9) single phase 13.8kV PTs for three (3) 13.8kV incomers.
2. Thirty four (34) 630A breaker cubicles for outgoing feeder circuits.
3. Two (2) 630A breaker cubicles for station service transformers.
4. Two (2) 3600A breaker cubicles for bus tie circuit breaker.
5. Three (3) 630A breaker cubicles for capacitor banks (with speed type earthing switch and surge arresters).
- Two (2) 500kVA, 13.8kV/220-127V ONAN, Dyn11 station service transformers with all accessories.
- Termination of 13.8 KV, 25KA, 1 sec XLPE cable (5x1cx630sqmm/phase) between Power Transformer & 13.8 KV Switchgear.
- Termination of 132 KV, 40 KA, 1 sec XLPE cable (1cx630sqmm/phase) between Power Transformer and GIS.
- 220/127V AC power system with auto transfer scheme.
- 125/48V DC auxiliary power system with the following:
1. One (1) set of Battery Bank 600AH (minimum) on 8-hour basis for125V.
2. Two (2) units of chargers with 100A (minimum) rating for125V.
3. One (1) set of Battery Bank with capacity of 250AH for 48V DC system.
4. Two (2) chargers with 50A rating (for 48V).
5. DC distribution panel boards (125-48V) complete with breaker
IN-PLANT TRAINING:
- TRANSFORMERS AND ELECTRICAL KERALA LIMITED (TELK)
DECLARATION:
I hereby declare that the Information furnished above is correct to the best of my knowledge and belief.
Station: SAUDI ARABIA
Date : 10/5/2011 Rahul Raju
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4137386
Date & Time : 16th May 2011 3:57 PM (UTC)
IP Address : 188.48.38.122
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.17) Gecko/20110420 Firefox/3.6.17
Predicted Country : --