www.apsidc.in Recruitment 2011 : Civil Engineer, Technical Assistant

[Admin]

APSIDC Recruitment 2011 : Civil Engineer, Technical Assistant

Name of the Organization : ANDHRA PRADESH STATE IRRIGATION DEVELOPMENT CORPORATION LIMITED (APSIDC)

Company Address :
ANDHRA PRADESH STATE IRRIGATION DEVELOPMENT CORPORATION (APSIDC)
8-2-674/2/B,
ROAD NO. 13,
BANJARA HILLS,
HYDERABAD - 500034
ANDHRA PRADESH,
INDIA.

Name of the Post : Civil Engineer, Technical Assistant
Asst. Executive Engineers – 9 Posts
Asst. Engineers – 8 Posts
Technical Assistants – 3 Nos

Age Limit : Not below 18 years as on 1.1.2011

Qualification :
a) Asst. Executive Engineers :
Must possess B.E./B.Tech/AMIE in Civil Engineering from any recognized
Institution in India. Should have passed the qualification as on 1.1.2011.
b) Asst. Engineers :
Must possess Diploma in Civil Engineering from any recognized Institution in
India. Should have passed the qualification as on 1.1.2011. Candidates
Possessing higher qualifications other than Diploma in the discipline of Civil
Engineering are not eligible.
c) Technical Assistant :
Must possess ITI (Draughtsman) in Civil Engineering from any recognized
Institution in India. Should have passed the qualification as on 1.1.2011.
Candidates possessing higher qualifications other than ITI (Draughtsman) in
the discipline of Civil Engineering are not eligible.

Pay scale :
a) Asst. Executive Engineer : Rs.16150-450-17050-490-18520-530-
20110-570-21820-610-23650-650-25600-700-27700-750-29950-800-
32350-850-34900-900-37600-970-40510-1040-42590
b) Asst. Engineer : Rs.15280-420-15700-450-17050-490-18520-530-
20110-570-21820-610-23650-650-25600-700-27700-750-29950-800-
32350-850-34900-900-37600-970-40510
c) Technical Assistant : Rs.8440-240-8680-260-9460-280-10300-300-
11200-330-12190-360-13270-390-14440-420-15700-450-17050-490-
18520-530-20110-570-21820-610-23650-650-24950.

Date of examination : 27-3-2011 from 10 A.M. to 12 Noon.

Application fees : Rs.275/-
The Applicant should pay the prescribed Fee as per the notification in any one of the A.P. Online centers

How to Apply : APPLY ONLINE
http://www.apsidc.in OR http://apsidc.cgg.gov.in

Last Date of Application Receipt : 26-2-2011

Detailed Advertisement : http://www.apsidc.in/pdf/Detailed-Notification.pdf

Application form Download : http://www.apsidc.in/pdf/Detailed-Notification.pdf

Company profile :
Andhra Pradesh State Irrigation Development Corporation was established in 1974 as an autonomous corporation under the Government of Andhra Pradesh, with main objective to take up the onus to provide irrigation facilities to upland areas to uplift small and marginal farmers including SC's and ST's with the funds provided by Government, Institutions and beneficiaries etc.

***************
General Instructions:
This is information on ANDHRA PRADESH STATE IRRIGATION DEVELOPMENT CORPORATION LIMITED (APSIDC) Recruitment 2011 / Vacancies / Careers / to be filled, for the post of Civil Engineer, Technical Assistant.
If you are looking for jobs / career in ANDHRA PRADESH STATE IRRIGATION DEVELOPMENT CORPORATION LIMITED (APSIDC) , you have to apply by downloading the application form given in the link above.
Full details of recruitment in ANDHRA PRADESH STATE IRRIGATION DEVELOPMENT CORPORATION LIMITED (APSIDC) can be had from the detailed advertisement link as given above.
You can also visit the careers page of ANDHRA PRADESH STATE IRRIGATION DEVELOPMENT CORPORATION LIMITED (APSIDC) to know more about the selection procedure, latest results, other jobs vacancy requirements etc.
Please ensure that you apply before the last date as all government recruitment procedures adhere a strict policy on this.
***************

[Guest-IJT]

Gyanesh
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
gyanpgcil AT yahoo.co.in
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
Asst Engineer
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
GYANESH
Contact Info :
Linkedin : http://in.linkedin.com/in/gyansingh77
Experience
- Have total 8 years experience in which 5 years in Power Transmission & Distribution Projects execution in Powergrid Corporation.
- Have knowledge of different phases of Project cycle like Survey, Finalization of Bill of Quantity (BOQ), all types of Bill Processing (Supply, F&I, Price Adjustment, Erection etc.), Supply Tracking, Erection, Testing & Commissioning and Contract Closing.
- Working on the projects under Powergrid being executed by AREVA T&D India Ltd. and IVRCL Infra. Ltd.
- Worked on RADAR systems in Indian Air Force the youngest and technologically most advanced wing of Indian Armed Forces.
Profile Highlights :
5 years of experience in Project Management in Transmission & Distribution Projects.
2 years of experience in Installation, Testing & Commissioning of RADAR (GCA Complex) in Indian Air Force.
2 years of experience in maintenance of RADAR and other modern navigational equipments in Indian Air Force.
Project Details
Powergrid :
Powergrid one of the leading Public Sector Undertaking of Govt. of India is the Central Transmission Utility (CTU) of the country.
# Project 1 :
APDRP (From Sept 2006 – Mar 2009)
Project Designation Executing Agency Client
Accelerated Power Development and reforms Program (APDRP) from Sept 2006 to Jun 2009. Asst Engineer AREVA T&D India Ltd BSEB
Objectives of the project :
- To strengthen the sub Transmission network of State Electricity Board so as to minimise T& D losses.
- Augment the existing capacity of Grid Sub-Stations in order to cater the growing electricity demands.
- Implementing metering system at all levels of feeders in order to have proper energy accounting.
Work Accomplishments :
- Construction of Transmission lines and Testing & commissioning of Substations.
- Finalization of BOQ based on Survey report data and make necessary changes in qty as required.
- Quality checks at site as per as per GTP and specification given in related drawings.
- Documentation and finalization of short tenders called during the project execution for extra works.
# Project 2 :
Rural Electrification Project (from July 2008 to till Date)
Project Designation Executing Agency Client
Rural Electrification Project (from July 2008 to Sept 2010. Asst Engineer IVRCL Infrastructure & Projects Ltd. BSEB
The objectives of the project :
- An ambitious program sponsored by the Govt. of India with the objective of electricity to all.
- Developing 33kV & 11 kV infrastructures in the villages under Rural Electrification Project.
Work Accomplishments :
- Lesion with District administration for information/ help required for smooth & successful execution of the project.
- Use managerial skills to solve ROW problems arose with public in fields during construction of lines and necessary monitoring of work to complete the project within specified cost and time frame.
# Project 3 :
Indian Air Force (From Sept 03 – Aug 06)
Indian Air Force is the youngest and technologically most advanced wing of Armed Forces.
Project Designation Location RADAR System
Installation, Testing & Commissioning of ATC RADAR CPL Various places including N. Delhi SRE & PAR
ATC RADAR SRE basically used for surveillance purpose works in L- band allotted by International Telecom Union. This RADAR is based on digital MTI technique which cancels static targets using I & Q channels.
Installation support :
RADAR installation, testing and Commissioning work involves through knowledge of functioning of different modules of a RADAR equipment and study of drawings with the help of which routing of signals can be made using wires and tags for easy identification of signals. In testing phase all modules are individually tested with CRO, signal generator and other testing /measuring instruments. Finally RADAR is calibrated with the help of other calibrated RADAR or Radio Direction Finder.
Work Accomplishments :
- Installation, Testing & Commissioning of SRE RADAR.
- Maintenance of Air Traffic Control RADAR up to 3rd line servicing..
- Maintenance of Precision Approach RADAR specially used for landing purpose.
- Maintenance of Navigational Transponders.
- Independent charge of GCA (section having above three systems) shift operations.
- Maintenance of Air borne RADAR and Auto Pilot system.
Education :
Degree MBA Bachelor in Engineering Diploma
Institute Punjab Technical University Institution of Engineers, Kolkata, Central School Trade Examination Board, AF
Subject / Specialization Marketing & HR Electronics & Communication Engineering Electronics
Professional Training/Certifications :
1. Paper presented in 4th Bihar Science Conference on “Smart Energy Meters to Control Energy Theft”
2. SGCA-SRE (Up to 3rd line Servicing), Communication TETTRA School, Air Force Pune.
3. Transport Aircraft RADAR & Navigational equpt. (Up to 200 hrs Servicing), IL 76/78 TETTRA School, Air Force Agra.
Expected CTC : As per Industry standards
Preferred Location : Any where in India & Abroad
Place: Munger
Date: 05.05.2011 (Gyanesh)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4125498
Date & Time : 13th May 2011 5:55 AM (UTC)
Form Location : --
IP Address : 117.192.25.30
Browser Info : Mozilla/5.0 (Windows NT 6.0) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.65 Safari/534.24
Predicted Country : India

[Guest]

K.Ramesh
CURRICULUM VITAE

Email : ramcivil019 AT gmail.com

Career Objective :
To purse a successful career in an organization which provides me with an opportunity to develop and put my skills and expertise to the best of use.
Academic Profile :
Qualification College/School Univ/Board Year of passing Percentage
(%)
Diploma(civil) G.M.R Polytechnic College, Srisailam, Kurnool District SBTET 2007-10 76
S.S.C. Z.P.H.S(Boys) yemmiganoor kurnool District SSC 2006-07 76
Software Skills : Ms-Office, AutoCAD, C-LANGUEGE.
Project Work : “SAFE WATER SUPPLY FOR A TOWN”

[Guest]

Ganesh Kumar.P

E-mail : pgani AT rediffmail.com
GOAL
As a qualified D.M.E, MECHANICAL Junior engineer seeking a challenging leadership position to utilize my skills and abilities in manufacturing unit that offers professional growth while being resourceful, innovative, result oriented and flexible, Ready to achieve in any challenging environment.
EXPERIENCES GATHERED
TOTAL : 7 YEARS and 5 MONTHS
1. Presently working as a Junior Engineer - in “WINWIND POWER ENERGY PVT LTD.,” (1 MW ROTOR BLADES MANUFACTUTRER), Chennai, from 07.12.2010 to till date (08 months).
Responsibilities Having
- Producing rotor blades with FRP (composites) by using Vacuum Assisted Resin Infusion Molding (VARIM) Technology by means effective utilization of 6 M.
- Ensure that all the documents pertaining to manufacturing process are as per the latest revision and are in line with ISO requirements.
- Ensure the availability of materials, machines and manpower for execution of production plan.
- Ensure the quality of product by handling non conformities with respect to material, process and product.
- Having details of equipments, hand tools and machines with respect to functioning, calibration, intactness and maintenance schedule.
- Working towards Continual improvements in the shop by initiating KAIZEN to reduce process cycle time, defects and material wastages etc.
- Coordinate with Quality department for incoming materials inspection, in-process inspection and approval.
- Receiving instructions for NCR from Engineering through QC and perform the same.
- Taking care of mould maintenance, devices corrections and modifications in co ordination with Tooling team.
- Ensuring the safety level in the shop floor.
- Working for QHSE standards.
- Identification and segregation of wastages.
- Educating the sub ordinates by means of brain storming for process and safety issues.
- Attending training programmes which related to team work, Leadership, first aids and goal setting.
- Evaluating the skill level of the Junior Engineer Trainees and Technicians by conducting written tests, practical’s and Viva-voice with respect to production processes, safety and environment.
- Controlling and maintaining the shop floor discipline.
Key skills and knowledge
- Good knowledge of Rotor Blades and Nacelle cover parts (composites) manufacturing as well as Servicing.
- Quality improvement projects to avoid the Non Conformities.
- Strong analytical and problem solving skills.
- Strong in VARIM techniques.
- Wastage Control.
- Handling J E T’s, Technicians and contractors in effective way.

2. Worked as a FRP Master Technician –in “REGEN POWERTECH PVT LTD”, (1.5MW WEC
MANUFACTURER), various sites in India from Sep 2008 to Nov 2010 (27 months).
Responsibilities Had
- Had smooth work flow in co ordination with internal customers and suppliers.
- Supported to Mechanical team while loading & unloading the blades and transportation from stock yards to locations.
- Reported to higher officials about the site FRP Parts Transporting damages and then completing the reworks in time to normal work flow.
- Servicing of the Nacelle and hub covers at sites.
- Coordinating with M/s.LM wind Power Blade servicing Team while blade servicing at site and preparing of MOM’S.
- While turbine erection coordinating along with erection team.
- Preparing trailing edge and Leading edge protecting caps to prevent the blade damaged during erection as well as rotor assembly.
Key skills and knowledge
- Good knowledge of Rotor Blades assembly with hub at site.
- Team work.
- Knowledge of 5S.
- Good communication skills.
- Cost saving projects.
- Good knowledge in polyster resin using methods.
3. Worked as a Technician in Production department in “RRB ENERGY LIMITED” Chennai in the period from May 2008 To August 2008 (04 months).
Responsibilities Had
- Produced rotor blades with FRP (composites) by using Pre preg Technology.
- Spar web repairing works

Key skills and knowledge

- Good knowledge in blade manufacturing with Pre Perg Technology
- Knowledge of Three blades in a gauge loading along with dispatch team.
4. Worked as a Team Leader in “SUZLON ENERGY LIMITED”, in the period from July 2005 to May 2008 (35 months).
Responsibilities Had
- All external and internal side reworks can do rework individually.
- Work allotment to the Team members.
- Organized materials requirements.
- Man power regularities.
- Monitored the materials consumption as per requirements.
- Reported the Progress of work to higher officials daily.
- Attendance regularities.
- Data captured and documented which are related to materials,man hours,machine details etc.,
- Going to sites to complete blade reworks and completed difficulty repairs at sites.
Key skills and knowledge

- Knowledge of man power handling.
- Knowledge of materials handling.
5. Worked as a Temporary operator trainee in Break pads Production department in “RANE BREAK LININGS LTD” Chennai in the period April 2005 to June 2005 (03 months).
Responsibilities Had
- Operating the pressure dye making machines and making break pads and curing the pads in hot woven and pad chamfering machine operating.
- Printing machine operating to print the batch numbers on to be dispatched parts.
6. Worked as a Trade apprentice in “HYUNDAI MOTOR INDIA LTD” in the period from February 2003 To January 2004 (12 months).
Responsibilities Had
- Engine and transmission Local parts quality department line inspector.
- E & T assembly parts inspection as per quality check lists.
- Aluminum cylinder head samples cross cutting and blue print preparing for inside measurements as per supervisor instructions.
- Minor Checking points inspections with the use of CMM

MILESTONES ACHIEVED
**APPRECIATION CERTIFICATION WAS GIVEN by SUZLON FOR KAIZAN work implementation at
Plant.
**APPRECIATION CERTIFICATION WAS GIVEN by SUZLON for Best Team Leader award in the
Year of 2007, in the field of rotor blade production unit.
**Achieved all the assignments which are placed on me.
**Having exposure of different Rotor blades such as 0.6MW, 1MW, 1.25MW, 1.5MW, 2MW and 2.1 MW.
**Achieved Zero NCR blades.
** Achieved Zero Accidents.
**Achieved 24 hrs molding cycle time and had least lead time of finishing for the rotor blades 1 MW
with good team work.
COMPUTER PROFICIENCY

Packages : MS –Office
Design Tools : Auto CAD 2007
EDUCATION QUALIFICATIONS
Technical : Diploma in Mechanical Engineering (DME)
(Percentage of Marks – 68.3%)
(IASE DU University – Through Pondicherry study centre)
: ITI (Fitter)
(Percentage of Marks – 80.8%)
Chaitanya Bharathi ITC, Kovvur,
Andhra Pradesh.
Academic : SSC
(Percentage of marks - 53.6 %)
Govt High School, Kovvur,
Andhra Pradesh.

[Guest]

SHOAIB MAKANDAR
Email : shoaibm_1423 AT rediffmail.com
ENGINEERING IN CIVIL
Objective
In search of entry level position in civil engineering that will allow me to utilize my engineering skills for company benefit that will also help to improve my career.

Skills
- Engineering degree with good numbers.
- Excellent communication and organization skills.
- Familiar with basic computer knowledge such as Ms.office and software skills such as AUTOCAD in 2D.
- Hard work and able to work under pressure also.
- Able to do documentation and analysis.
Qualification in B.E civil
SEMESTER MONTH/YEAR SGPA CGPA COLLEGE NAME
Vlll JUNE-2011 8.5 7.63 BASAVESHWAR ENGINEERING COLLEGE BAGALKOT.
Vll JAN-2011 8.3 7.51 “
Vl JUNE-2010 8.18 7.38 “
V JAN-2010 7.68 7.19 “
lV JUNE-2009 6.94 7.05 “
lll JAN-2009 7.86 7.14 “
ll JUNE-2008 6.82 6.64 “
l JAN-2008 6.39 6.39 “
AGREEGATE : 7.63
Course Year Name of the Institution % Of Marks
PUC /12th 2007 J.T PU COLLEGE, GADAG. 61.67
SSLC/10th 2005 JAYCEE HIGH SCHOOL, 84.48
GADAG.

Achievements
- Played VOLLEY BALL at Karnataka state level in High school and played many VTU zones
- Participated in QUIZ competition conducted by ULTRA TECH CEMENT on concrete technology
- Served as paper presentation Co-ordinator in NATIONAL LEVEL FEST ASTROBES-11 conducted by civil department
PROJECT EXECUTED DURING B.E
- EXTENSIVE SURVEY PROJECT
- Highway project.
- Tank project.
- Water supply project.
- Sanitary project.
- FINAL YEAR PROJECT : Project on Fly ash concrete.
DESCRIPTION : Fly ash is an industrial waste and used as admixture in concrete which significantly improve the long term strength and durability and reduce heat of hydration.

Area of Interests
- Concrete Technology
- Pavement design
- RCC Design and Drawing
- Geo Technical Engg
- Hydrology

[Guest]

CURRICULUM VITAE


PAWTEKAR SAMEER DEEPAK
Email : sam_16_1 AT yahoo.co.in
sameerpawtekar AT gmail.com
___________________________________________________________________________
CAREER OBJECTIVE :
To secure challenging position in your prestigious organization where I can effectively contribute my skills, knowledge & expose my potentials.

EDUCATIONAL QUALIFICATION :
Examinations University/ Board Year of
Passing %
Marks Class Obtained
S.S.C. Nasik 2003 51.46 Second class
H.S.C Nasik 2005 49.00 Pass Class
F.E.(Civil) Pune 2007 52.23 Second class
S.E.(Civil) Pune 2008 53.27 Second Class
T.E.(Civil) Pune 2009 60.00 First Class
B.E.(Civil) Pune 2010 67.27 First class with Distinction
Current Employer : Gannon Dunkerley Company Limited
Designation : Trainee Junior Engineer

Role : Execution of work as per drawing, preparation of monthly contractor bills, preparation of bar bending schedule, checking of reinforcement, centering and shuttering.
CTC : 2.65 lacs per annum.
PROJECT WORK UNDERTAKEN :
Degree project :
Self Compacting High Performance Green Concrete :-
In this project we have replaced fine aggregates from concrete by a combination of marble sludge powder and rock crusher dust to attain maximum strength.

EXTRA CURRICULAR ACTIVITIES :
1) Runners up at Nirma University for flyover model construction.
2) National level paper presentation on Inflatable rubber dam at Vidya Pratisthan (Baramati)
3) Seminar on Design techniques to strengthen buildings against acts of terror and car bombs.
4) Winner of the team of inter college volleyball tournament.
5) Runners up of the cricket team of the inter college tournament.
6) Passed NCC exam held in the year 2000 with A grade and also attained the Annual Training Camp at JNPT (URAN).
7) Passed the Elementary Grade Drawing Examination held in the year 1999 with B grade & Intermediate Grade Drawing Examination held in the year 2000 with A grade.
1. Software : - AutoCAD,
2. Operating System : - MS-DOS, WINDOWS-98, Windows Xp
3. Office Automation : - MS-Word, Ms-Excel, Power point.

Hobbies : Caroom, Volleyball, Workout in Gym, Badminton, Cricket, Swimming.
LANGUAGE FLUENCY :
SKILL ENGLISH HINDI MARATHI
Read -
Write -
Speak -
MY STRENGTH :
- I am always tried to be punctual.
- I am always prepared to work on the field.
- I like to work as a team.
WHAT I CAN DO FOR ORGANIZATION :
- I will try my level best for the betterment of the organization.
WHAT I CAN EXPECT FROM AN ORGANIZATION :

- It should be serious about the safety of all the employees.
- It should take technical seminars as well.