Alstom Projects India Ltd Delhi : Piping Engineer

[Admin]

ALSTOM is a global leader in world of power generation and rail infrastructure and sets the benchmark for innovative and environmentally friendly technologies. ALSTOM Projects India Limited has annual turnover of Rs. 1,250 crores and employs 65,000 people in 70 countries, serving customers worldwide. ALSTOM in India has full capabilities in engineering, manufacturing, project management and supply of power generation equipment. It also has a significant presence in the transport sector in India providing railway equipment and technology solutions.

Designation Piping Engineer
Job Description Essential :
--General boiler pressure part experience.
--Familiarity with either IBR or ASME Section1.
Desirable :
--Rohr2 / Caesar.
--Solid Edge.
--PDMS.
--ANSYS (FEA).
--ASME 31.1,31.3, ANSI Codes.
--Stress Analysis.
--Support selections.
--Code calculations.

Desired Profile --Designs complying with ALSTOM standards & code of construction.
--Supervising less experienced engineers and draughtsmen within the team.
--Guiding Fab / Erectors by providing clarification asked by them.

Experience 4 - 9 Years

Industry Type Oil and Gas/ Power/Infrastructure/Energy

Functional Area Engineering Design, R&D

Education UG - B.Tech/B.E. - Mechanical

PG - Any PG Course - Any Specialization;Post Graduation Not Required

Location Delhi/NCR

Keywords Piping Engineer, Rohr2 / Caesar, PDMS, Stress Analysis

Contact Mr. Ritesh Shaw
Alstom Projects India Ltd

Website http://www.alstom.com ,
http://www.in.alstom.com
Job Posted 05 Aug
Reference Piping Engineer

[manojsit33@gmail.com]

Dear sir,
i am manoj kumar passed B.Tech in 2007.And i am having 4 year exp. in piping field with 2 year gulf exp.

Thanks
manoj kumar

manojsit33@gmail.com

[Udita Batham]

Udita Batham
Room No.3, E-mail : udita.knit AT gmail.com
udita.batham AT adityabirla.com

Work domain :
Piping design engineering, with exposure in the following :
- Preparation of basic schemes including PFDs and PIDs
- Sizing and specification of piping for Alumina refinery jobs
- Specification and selection of pumps for various applications
- Use of “Cadworx Pipe” for piping drawings and isometrics
- Stress analysis of piping systems using Caesar II
Career Objectives :
To achieve professional excellence in the field of piping design and Plant engineering by association with world class engineering organizations and performing to the best of my potential in order to improve the effectiveness & efficiency of the organization by focusing on Quality Improvement, Cost Reduction, Faster delivery & improved productivity, and thereby add value to myself & society at large.
Core Competencies :
- Piping design and engineering
- Specification and selection of pumps
- Foundation course of PRO-E wild fire-2.0 certified by CADD CENTRE
Bhopal M.P.
- Good communication skills and Ability to work in a team.
- Organizational abilities and Leadership potentials.
Relevant Work Experience :
- Job Experience :
Working as Piping Design Engineer for the last 2 years, with involvement and contribution to the following jobs and projects :
- Project Sunshine – checking of Piping Isos and BoMs prepared by Consultant
- Pipe sizing and pressure drop calculations
- Piping Thermal Stress analysis

- Company Profile :
Hindalco is the flagship company of The ADITYA BIRLA GROUP. It is the leading producer of Aluminium in India and one of the lowest cost producers of Aluminium in the world. It is an ISO – 9001 & ISO – 14001 certified Company.
- Job Profile :
To contribute in Design, plan, review and scheduling of allotted pipe design work in order to ensure safe, cost effective with quality, reliable implementation of a project within budgeted cost and allocated time for achieving expansion, modification, modernization and system strengthening of plant.
Educational Qualifications :
Degree Aggregate
Percentage University/Board Institute/College Year
Of Passing
SSC 74.8 % C.B.S.E Maharshi Patanjali Vidya Mandir.Allahabad 2001
HSC 71.2 % C.B.S.E Maharshi Patanjali Vidya Mandir.Allahabad 2003
BE (Mechanical Engineering) 71.75% U.P.T.U Kamla Nehru Institute Of Technology,Sultanpur 2008
Professional Accomplishments :
Project Manager For Vanadium Sludge upgradation worth 189 Lakhs.
Handling Projects “VAm”, “PGL Flash Tank” Worth 1415 Lakhs.
Technical Skills :
- Equipment piping layouts
- Piping materials and standards & Piping materials take - off
- Static & Dynamic Stress analysis using Caesar –ll
- Supporting and other functions of Piping Engineering
- Basics of AutoCAD 2009
- Basics of CADWORX 2010

Co-Curricular Activities and hobbies :
- Playing Volleyball
- Organizing events
- Interacting with people
- Dancing
Achievements :
- Chief Event Organizer of “Mechanical Engineering Forum” and senior executive of Cultural Council.
- Participated in Volleyball tournament at “SPARDHA-2006” all India games 7 sports festival held at BHU ,Varanasi.
- Won second prize in volleyball at “TVARAN 2008” all India sports festival held at KNIT Sultanpur.
- Participated in Extempore and Paper Presentation Safety Week at HINDALCO.
Experience : 2 Year
Current CTC : 3.67 Lacs/ annum + Variable Pay

Expected CTC : 6 Lacs
Notice Period : 3 months
Current Location : Renukoot
Declaration :
I, hereby, do solemnly affirm that the details furnished above are true up to the best of my knowledge.


(Udita Batham)

[Rohit_Mathur]

Name : Rohit Mathur
Email : mathur531984 AT yahoo.co.in
Mob :
CURRENT JOB DESCRIPTION
2007 till date : Working as a Executive Design Engineer in Larsen & Toubro Limited, India’s Largest Engineering Services Major, in its Design Centre, I have been involved in :-
- Concept designs of naval vessels for Fire/Bilge/Ballast/Fuel Oil systems including Equipment sizing & selection, Piping system calculations of primarily 1600T Corvette, 1750T OPV and 90T IB in accordance with class rules (ABS/LRS/IRS). Successfully taken the designs to preliminary phase where spool drawing & production drawing is focussed
- Evaluation of various softwares (Pipe Net, Pipe Flow Expert, CAE Pipe) for detail design and preparation of comparison report
- Project life-cycle management (PLM) skills
- Design of different Major Fire Fighting systems like : CO2 system, FM-200 system etc. as per classification society including system piping layout.
- Technical bid preparation of Different projects for Indian Navy and Indian Coast Guard.
- Quotation evaluation and vendor selection for different fire fighting systems and other equipments
PROJECT UNDERTAKEN
- Indian Coast Guard Project (IB)
- System Design for Domestic Sea Water and Fuel Oil system including Pipe sizing (as per ASME), Pump sizing & selection, Schematic, Piping layout, Optimised Pipe Routing in 3D software for clash checking, Spool production drawing, BOM extraction
- Pipe flow analysis to meet the requirement of different consumers for Sea Water, Fuel Oil systems etc.
- Vendor evaluation & selection for Fire Fighting System (FM-200)
- Indian Navy Project at Vizag (INS Arihant)
- Routing & Installation of spools to meet the design & operational requirement
- Proper co-ordination between Project Management Group & design department to remove the bottlenecks during execution
- Issuing Design Change Requirements notes & getting approval from Russian & navy consultants
- Vendor Contact & Techno-Commercial evaluation for different fittings for different piping system
- Rolldock Project at Surat
- Pipe flow analysis to meet the different consumer requirement for Sea Water (Bilge/Ballast), Fuel Oil systems etc.
- Sizing of pumps, equipments and pipes as per class rules.
- Mean Oil flow probability calculation for fuel oil as per MARPOL
SOFTWARE SKILLS
- AutoCAD P&ID
- Pro-E
- PDMS (Piping)
- Pipe Flow Expert
- Pipe Net
- CAE-Pipe
- PLM Enovia
- MS Office
EDUCATION
- Bachelors of Technology (Mechanical) : Krishna Institute of Engineering and Technology (U.P.Technical University) Ghaziabad, India. Scored 75.9%
- High School Certificate : S.S.S.K. Inter College, Hapur (U.P.Board), India. Scored 65.3%
- Secondary School Certificate : S.S.S.K. Inter College, Hapur (U.P.Board), India. Scored 68.4%
ACADMIC PROJECTS, TRAINING AND SEMINAR
- B.Tech Project- Making of Bio-Diesel by waste vegetable oil and testing on two stroke diesel engine to find optimized blend.
- Summer Training at Bharat Heavy Electrical Limited (Haridwar) in Turbine Blade Manufacturing Unit
- Pro/Engineering-Solid Modelling, Assembly Modelling, Surfaces, Mechanism Design Extension.
- Seminar on “Computational Fluid Dynamics (CFD)”

[Guest]

RESUME
Email : boyalaraj AT yahoo.co.in
NAME : B.RAJA SEKHAR
QUALIFICATION : DIPLOMA IN MECH. ENGG. FROM STATE BOARD
OF TECHNICAL EDUCATION & TRAINING, A.P.,
HYDERABAD, IN APRIL 1992
ABROAD EXPERIENCE : 1 1/2YEAR
OVERALL EXPERIENCE : 18 1/2 YEARS
DETAILS OF EXPERIENCE :
1 PRESENTLY WORKING WITH M/S ESSAR PROJECTS (I) LTD., AS A SR.MANAGER, FOR THEIR MATIX FERTILIZER PROJECT AT DURGAPUR, WEST BENGAL.
2 FROM JANUARY 2010 TO NOVEMBER 2011 WORKED WITH M/S MAA KUTHARI GROUP OF COMPANIES,UAE AS A SR.PIPING ENGINEER, FOR THEIR SPOOLGEN MANAGEMNET PROJECTS
a) WITH PETROFAC INTERNATIONAL LTD.IN SHARJAH, FOR THEIR ELMERK CPF PROJECT
b) WITH KHARAFI NATIONAL IN ABUDHABI FOR THEIR HABSHAN IGD PROJECT
JOB PROFILE WITH MAAKUTHARI GLOBAL :
FIELD WELD & SPOOL NOS MARKING ON ISOMETRICS
CROSS VERIFICATION OF SPOOLGEN ISOMETRICS & PROGRESS MONITORING
COORDINATION WITH CLIENT REGARDING THE TECHNICAL QUERIES FROM THE ISOMETRICS
TRAIN THE FRESHERS IN FIELD WELD& SPOOL MARKING AND IN CROSS VERIFICATION PROCESS
3 FROM SEPT 2004 TO JANUARY 2010, WORKED WITH M/S ESSAR CONSTRUCTION (I) LTD., AS A MANAGER, FOR THEIR INHOUSE PROJECTS LIKE ESSAR OIL LTD, REFINERY PROJECT AT VADINAR, JAMNAGAR. AND HAZIRA PLATE LTD PROJECT,HAZIRA IN SURAT.
Page 1 of 3
4 FROM SEPT 1996 TO SEPT 2004 WORKED WITH M/S PETRON ENGG. CONSTN.LTD., AS A SR.ENGINEERING ASST. FOR THEIR VARIOUS PROJECT SITES AS MENTIONED BELOW :
a) 1350 MTPD AMMONIA IV PLANT FOR GSFC BARODA
b) AMMONIA REVAMPING UNIT FOR CFL, VIZAG.
c) DHDS UNIT FOR CPCL, CHENNAI.
d) DHDT UNIT FOR BARAUNI REFINERY LTD, BARAUNI.
e) HCU FOR REFINERY III FOR CPCL, CHENNAI.
f) FABRICATION OF HOT OIL & PACKOL CHARGE HEATER UNITS FOR TPL, CHENNAI
g) FABRICATION OF PX & DCU HEATERS FOR IOCL PANIPAT.

5 FROM JUNE 1995 TO AUG 1996 WORKED WITH M/S PLUS TECH ENGG. PVT. LTD., FOR THEIR RELIANCE INDUSTRIES LTD, POY PROJECT, AT HAZIRA.

JOB PROFILE :
EXECUTING THE FABRICTION ERECTION, TESTING & PRE COMMISSIONING ACTIVITIES OF PIPING WORKS AS PER THE STANDARDS & PROCEDURES.
EXECUTING THE FABRICTION & ERECTION, OF STRUCTURAL WORKS LIKE PIPE RACK, COLUMNS & PANELS, FOR HEATER WORKS AS PER THE STANDARDS & PROCEDURES.
COORDINATING WITH CONTRACTORS AND WITH INTERNAL DEPARTMENTS IN EXECUTING THE PIPING WORKS AND PROGRESS MONITORING.
COORDINATING WITH CONSULTANT& CLIENT REGARDING MECHANICAL CLEARANCE, TESTING & PRECOMISSIONING ACTIVITIES OF THE PIPING JOB. ALSO ABLE TO PREPARE TEST PACKAGES IN CORRELATION WITH P&ID.
ALSO INVOLVED IN BILLING, SUB CONTRACTOR’S BILLING & MATERIAL RE CONCILLIATION WORKS OF THE PROJECTS WORKED.
Page 2 of 3
6 FROM MARCH 1993 TO MARCH 1995, WORKED AS AN ASST.MECHANIC WITH M/S ESSAR OIL LTD (THRU VADHYAR OFFSHORE SERVICES) FOR THEIR OFFSHORE DRILLING RIG “ESSAR DISCOVERER”
JOB PROFILE WITH ESSAR OIL LTD :
ASSISTING IN OPERATION & MAINTENANCE OF PUMPS,COMPRESSORS,DIESEL GENERATORS, FRESH WATER GENERATORS AND DIESEL OIL PURIFIER

[Guest]

CURRICULUM-VITAE

Yuvraj S.Shedge
yuvrajshedge AT gmail.com .
OBJECTIVE :
To pursue a carrier in a dynamic challenging & mutually rewarding environment this enables me to grow both professionally as well as individually
I take the decisions with dogged determination and go ahead with them.
WORK EXPERIENCE :
Total Experience of 5+ years in Designing in piping as well as Project planning and site executions.
- Sustainable Technologies And Environmental Projects Pvt. Ltd. (Feb 2011- Feb 2012)
Designation : - Project Engineer (Design)
Responsibilities : -
- Study documents of the projects such as plan areas, equipment drawings, Civil and structural drawings.
- Preparation of drawings in Auto cad in2d as well as 3d.
- Vendor development.
Worked as Lead piping engineer for Orbit India Engineering. (July 2010- Jan 2011)
Responsibilities : -
- Study documents of the projects such as Process flow diagram, P&id, Piping specification, Plot plan, Equipment layout, Piping layout, Isometrics, Civil & structural drawings and client requirement
- Project Planning and scheduling of activities for designated project
- Design review, Guides project from time to time, and Corrective action to be planned when there is slippage in schedule.
- Maintaining track of day to day follow up of drawings for each project.
- Co-coordinating with clients, consultants, for detailing of drawings if out sourcing is done.
- Checking of piping layout, equipment layout.
- Prepare preliminary as well as final bill of materials using relevant specs available.
- Carry out and checking of individual isometrics from piping layouts.
- Site visit to understand client requirement if required.
Project Handled :-
1. Manglore Refinery Pvt.Ltd.
2. BPCL (As Built drawings of CCU plant Chembur plant.)
- Arihant Engineering; Mumbai (Feb 2008 – Jan 2010)
Company Profile :
Arihant Engineers (AE) is a detailed engineering firm, which was founded in 1997. Along with detailed engineering services AE also has specialization in Project Execution Services for Small & Medium size Petrochemical, Refinery, Bulk drugs, Heavy Chemicals, Dye & Dye - Intermediate Plants & Power Projects.

Designation : Project Engineer (Piping)
Project Handled :
1 Rehabilitations and as well as designing of Process Unit piping and equipments.
Responsibilities : -
1 Decommission & commissioning and designing of 3 Process (AAR, Diketene & INT) units with relates utilities by using documents such as p and ids and specs available.
2 Erection of various utilities piping, installation of CHW ,Cooling Water, Brine solution, Hot water, IBR piping, Air compressor lines Etc,
3 Installation of various piping MS, SS (304/316), and HDPE from Isometric drawing, G.A. Layout, Equipment layout designed by me.
4 Installing the structures such as pipe racks. MS Platforms.
5 Installation commissioning of cooling tower, Chiller plant, Hot water generator, air compressor units.
6 Carry out pre-commissioning checks like Hydro test.
7 Plan the requirement of manpower, tools, and consumables time to time on a particular site.
8 Keeping record of progress of work done onsite and sending daily or weekly site
Reports
9 Keeping the track record of material and assemblies at a site that are installed and which are in store for further use
10 Plan the installation of heavy tanks and equipments by Hydras and cranes etc.
2 Panacea Biotech Ltd.(Designing and executions of pipe routings and for utilities such as cooling tower steam compressed air,Ibr piping)
Responsibilities : -
1 Design and executions of pipe rack as per client satisfaction using p & ids.
2 Co-coordinating with clients, consultants, contractors, and vendors.
3 Testing and commissioning of the system
4 Maintaining track of day-to-day activities of each project.
5 Organizing of materials required for the execution of projects
6 Guiding junior colleagues on their day-to-day activities.
7 Sharing knowledge with colleagues.
8 Able to carry out the work required by company.
9 Be a team member and team leader.
Authorities :-
1 Can make technical /commercial decision independently for the benefit of the company.
2 Handle projects independently.
- Achievement : -
Panacea Biotech Ltd.(Chandigarh) :- Successfully designed and commissioned various utilities stations such as Hot Water Generator, Chillers (180tons), installation of heat exchanger, Errection of various piping(SS,MS,HDPE).
- Damle Associates. (May 07 to Nov 07)
Designation : Design Engineer.
Responsibilities : -
1. Line Routing Calculation.
2. Nozzle orientation.
3. Large piping ducting. Development of large size fittings.
4. M.T.O. preparation. With weight calculations
5. Co-coordinating with clients, consultants, for detailing of drawings if out sourcing is done.
6. Checking of piping layout, equipment layout.
7. Prepare preliminary as well as final bill of materials using relevant specs available.
8. Carry out and checking of individual isometrics from piping layouts.
9. Site visit to understand client requirement if required.
- Propack Technologies Pvt Ltd. (July 06 to Dec 06)
Designation : Site Engineer. (Design and execution)
Company Products : -
1. Ointment Mfg plants varies from 25kgs to 500kgs.
2. Syrup mfg Plants varies from 100ltrs to 5000 liters.
3. Tube filling machines for Plastic, Aluminum, and Lami tubes. The capacity of the machine is 50 tubes\ minutes.
Responsibilities : -
1. Visit to the customer.
2. On site designing of pipe routing, Calculation of bill of materials
3. Complete installation and trial at the customer end.
4. Arrange training seminars at the customer end.
Achievements : -
- Cooper Pharma (D.Doon) :- Successfully commissioned SS316 ointment mfg unit capacity of 500 kg. Tube filling machine capacity of 50 tubes /min.
- Ratchet Pharma (Baddi) :- Successfully designed and commissioned SS316 SYRUP mfg unit with load cell arrangement of capacity 3000 liters. Along with SS316L piping.
- Parle Tablet Tools Pvt. Ltd. Vasai (Oct 05 to June 06)
Designation : Site Engineer.

Company Products : -
Compression Tablet tools :
We manufacture the entire standard tooling as per EURO as well as IPT Norms. These standard tooling makes the tool completely INTERCHANGEABLE in nature hence can be used on any type of machine, may it be a Euro Standard machine or an IPT standard machine. It will also help into reduced inventory of tooling for different tableting requirements.
Responsibilities: -
1. Attaining the customer complaints.
2. After receiving the complaints make root cause analysis.
3. Take the necessary action on the complaint in order not to repeat in the future.
4. Training at the customer end regarding the problems the operator is facing regarding the compression tooling.
- NRB Bearings ltd (May 04- May 05)

Designation: Junior Shift Engineer.
Responsibilities: -
1. To maintain daily production.
2. To maintain day to day production tracks using ERP software.
3. To keep records of shift production.
4. To prepare MIS reports.
Educational qualification:

1 Diploma in Mechanical Engineering with Second Class.
2 SSC with Second Class from Gokhale High School, Borivali (W) (Maharashtra State Board) in 1998
Software Skills:
1 AutoCAD 2000/2006
2 CNC Programming.
3 Basic computer skills such as word excel and power point.
4 Currently learning PDMS.
I hereby state that all the facts mentioned are true to best of my knowledge and belief.

Yuvraj S.Shedge.

[Guest]

SUJOY BASAK
E-mail : sujoybasak AT rediffmail.com
sujoybasak86 AT yahoo.co.in

- Career Objective
To acquire leadership and knowledge, excel in innovative technology application, interact and share with team members, and to develop world-class solution to real world challenges.
- Technical Skill
- Software : Auto Cad
- CAD Worx P & ID
- CAESAR II
- Academic Qualification
B. Tech
Stream : Mechanical Engineering
College : Future Institute of Engineering & Management
University : West Bengal University of Technology
Percentage :
Sem1 Sem2 YGPA Year
1st Year 6.77 7.60 7.18 2005
2nd Year 6.96 7.82 7.39 2006
3rd Year 7.86 8.00 7.93 2007
4th Year 8.93 9.25 9.09 2008

DGPA-8.02
Year of Passing : 2008
H.S.
(10+2)
School : Lake View High School
Year Of Passing : 2004 Percentage : 55.9 %
Council : West Bengal Council Of Higher Secondary Education.
Madhyamik
(10)
School : Nava Nalanda High School
Year Of Passing : 2002 Percentage : 67.87 %
Board : West Bengal Board Of Secondary Education.
- Training
Company Name Place Durations
Oscar Toolings Tollygunge,
Kolkata One Week
Stone India Ltd. Taratala,
Kolkata Visit
Arvind Engineering Works Ltd. Taratala,
Kolkata Visit
IISCO Steel Plant Burnpur,
Asansol Two Weeks
- Strength
- Hard working
- Flexible and honest
- Interests
- Listening music.
- Playing football, cricket.
- Internet Surfing.
- Experience
- Worked in NEW ALLENBERRY WORKS from 04.09.2008 to 25.01.2010.
Department- Design (Helical Gear Dept.)
Designation- Senior Officer (Design)
Experience- 1 year 4 months
Location- Kolkata
- Responsibility
1. Auto Cad designing of gear box housing, manufacturing components and checking of layout.
2. Tooth design of gear and pinion in kiss soft.
3. Allotment and distribution of job to Draughtsman, Indenting of Raw materials and housing.
4. Foundation load calculation, torsional stiffness calculation of shaft, weight calculation of gear and pinion.

- Experience
- Working in CFI TECHNOLOGIES PVT. LTD. from 27.01.2010 till date.
Department- Design
Designation- Design Engineer (Mechanical)
Current Location- Kolkata
- Responsibility
1. Stress Analysis in CAESAR II
2. Checking of Piping Isometric drawing, routing of pipe, model review and piping support.
3. Preparation of Bulk Material List of pipe and pipe fittings of total plant.
4. Working in CAESARII (Piping Stress Analysis) for last 1.5 month.
5. Design and checking of static equipment like pressure vessel, tank and Equipment Data Sheet.
6. Checking of calculation of pressure vessel and tank.
- Worked at Indonesia, Jakarta, Cikampek in site, for 17 days (08.09.2011 to 25.09.2011) in 280 MTPD Nitric Acid Plant of PT Multi Nitrotama Kimia. Responsible for supervision of piping erection during the tenure.
- Seminar
1. Attended seminar on Renewable Energy Sources held in FIEM, Kolkata by West Bengal Renewable Energy Development Agency.
2. Seminar and live demonstration on Steam Trap organized by Armstrong International Pvt. Ltd, India.
.
- Declaration
I consider myself familiar with Mechanical Engineering aspects. I am also confident of my ability to work in a team or alone.
I hereby declare that the information furnished above is true to the best of my knowledge.
Date : 05.09.12 Signature Place: Kolkata
---------------------------------
(SUJOY BASAK)