SJVN Limited Recruitment 2011 www.sjvn.nic.in : Electrician Trainee, Steno Typist

[Admin]

SJVN LIMITED
(A Joint Venture of Govt. of India & Govt. of Himachal Pradesh)
An ISO 9001:2000 Company
A Mini Ratna & Schedule ‘A’ PSU

Name of the Organization : SJVN Ltd

Company Address :
SJVN Ltd
Himfed Building,
New Shimla, Shimla (HP)
PIN-171009
Tel: 0177-2670064

Name of the Post :
Electrician(Trainee) -08 posts
Steno Typist - 15 posts

Age Limit :
Electrician(Trainee) -30 years
Steno Typist - 29 years

SELECTION PROCESS:
The candidates will be required to undergo a Written Test followed by Trade Test and/or Interview.The Written Test will be designed to measure certain skills and abilities that underline all functions in respective discipline. The Written Test will be different from the test taken in academic examinations, and all the questions will be of objective type. The typing test for Steno-typists would be conducted on the computers and not on type-writer.

Pay scale :
Electrician(Trainee) -Rs. 5000-@3%-9580/-
Steno Typist - Rs. 5000- @3%-9580/-

Application fees : Demand Draft of Rs. 50/- (SC/ST and PH exempted) drawn in favour of SJVN Limited payable at Shimla

How to Apply :
All applications must reach the “Senior Manager (P&A), Recruitment Cell, SJVN Limited, Himfed Building, New Shimla – 171 009 (HP)

Last Date of Application Receipt : on or before 25-02-2011.

Detailed Advertisement : http://sjvn.nic.in/recdata/Advt_64-11-ttt.pdf

Application form Download : http://sjvn.nic.in/recdata/Advt_64-11-ttt.pdf

Company profile :
The SJVN Ltd (formerly Nathpa Jhakri Power Corporation Limited - NJPC ) was incorporated on May 24, 1988 as a joint venture of the Government of India ( GOI ) and the Government of Himachal Pradesh (GOHP) to plan, investigate, organize, execute, operate and maintain Hydro-electric power projects. The present authorized share capital of SJVN is Rs 7000 crores.

[Guest-IJT]

maddileti swamy
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
maddileti.swamy AT gmail.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
graduate engineer trainee
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
MADDILETI SWAMY
Email : maddileti.swamy AT gmail.com
Job Objective :
To work in a creative and challenging environment where there is room for upgrading skills and knowledge and where I can take part in the growth of organization by applying my knowledge and skills full.
Professional Experience :
Working Experience
NOW working for SRS AUTOMATION as project Engineer in PLC,VFD’S& SCADA from JAN 2010 to till date.
Job Responsibilities :
- Company Profile :
SRS AUTOMATION a leading engineering house is committed to provide the entire range of automation solutions & services to all industries in this arena. Based in Hyderabad, the technologically driven organization engaged as a trusted service provider in automation of industrial projects, design, supply & commissioning of electrical and automation systems with PLC based systems with HMI, SCADA operating systems, Industrial Drive system etc., with a strong team of trained and dynamic professionals.
Their solutions are widely used by many leading business houses engaged in the production of engineering goods, cement, steel, chemicals, pharmaceuticals, paper, rubber, machine tool etc.
WORK PROFILE
The following are the role & responsibilities executed during my tenure in the organization.
- Design, development and execution of assigned projects as per the customer requirement.
- Development of Technical Specification, architecture block diagrams, electrical drawings, Simatic Layouts of electrical panels, cost estimation, evaluation of technical proposals, Preparation of Quotation, Project Schedules, Commissioning Reports and documents per the requirement of the project.
- Leading projects, from planning to installation and commissioning stage. Inspection of control panels at vendor’s factory.
- Selection of PLC, Drives, HMIs, sensors and other field instruments as for the project specifications.
- Designing, Development and Implementation of application software and Hardware Configurations for PLC, HMI, SCADA, DRIVES and field instruments.
- Onsite faultfinding and logic modifications as per customer requirement.
- Perform other reasonable duties as required.
Automation Profile :
- Worked with Siemens PLCs like S7-200, 300,400 with application software SIMATIC Manager.
- Developing SCADA/HMI Application by using Siemens SIMATIC, WINCC, WINCC Flexible.
- Established the communication between controller to other field devices by using ProfiBus Communications.
- Commissioning of AC Drives of Siemens and integrating with PLC.
- Configuring the AC Drives in Open loop control, closed loop control in constant torque or variable torque applications.
- Good knowledge in Trouble shooting, Servicing of Electrical equipments.
- Good knowledge in installation of operating system, application software.
Acadamic Profile :
- M.Sc. Electronics and Communication (E &C) from S.K.University , Anantapur in 2010
- B.Sc.(M.E.CS) from Saraswathi Degree College affiliated to S.K.University, Tadipatri in 2008.
Technical Skills :
- Design : Electrical AutoCAD.
- Programming : SIMATIC MANAGER, WPL Soft.
- SCADA : WinCC, WinCC Flexible, Factory Talk View Site Edition.
PROJECTS HANDLED :
- SBM AUTOCLAVE for Sterilization, Gland Pharma Pvt. Ltd, Hyderabad..
PLC : Siemens S7-313 2DP,
SCADA : WINCC 6.2,
COMMUNICATION : ProfiBus using CP-5611 card.
- AUTOMATIC TIRE LIFTING STATION, Renault & Nissan Automotive India Pvt Ltd, Chennai,Tamilnadu.
PLC : Siemens S7-315 2DP,
SCADA : WinCC Flexible-2008
- EDGE BENDING MACHINE, Vijay Machine Tools, HYD.
PLC : Micro win for CPU224cn PLC.
HMI : OP-177B,
COMMUNICATION : RS-232.
- CUTTING MACHINE FOR FOAM, Ufoam Pvt Ltd, HYD.
PLC : Delta EX-2 PLC.
HMI : TP-04,
COMMUNICATION : RS-232.
Etc…
I hereby declare that all the details furnished above are true to the best of my knowledge.
Date :
Place :
(M.MADDILETI SWAMY)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4118477
Date & Time : 11th May 2011 12:01 PM (UTC)
IP Address : 115.248.253.125
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.16) Gecko/20110319 Firefox/3.6.16 handyCafeCln/3.3.21
Predicted Country : India

[Guest]

CURRICULAM VITAE
SANJEET NEGI
E-mail ID –sanjeetsinghnegi AT gmail.com

Objective

To be a confident and successful professional, and to hope up my technical and management skills through continuous learning.
Strength Focused, motivated and goal oriented. People to work in harmony and a spirit of teamwork, be live in dedicated and persistent hard work and possess ample analytical ability open to new ideas and viewpoint of others, decisive and deterministic nature.
Higher
Qualifications
1 B.Tech(Electrical Engineering)
63.3 upto 7th sem Marks

College : Rajasthan Institute of Engineering and Technology,
Bhankrota, Jaipur.

Rajasthan Technical University, Kota (Raj.)
2 Diploma in electrical engg.
With 72.98 %
Institute : Govt. polytechnic Srinagar Pauri Garhwal

Academic
Qualifications Senior Secondar from
(State Board U.K.) in 2005 with 62.6%

Secondar from
(State Board U.K.) in 2003 with57.5%

Training Experience
Organization :- 30 Days Training from “BHEL HARIDWAR & 14 Days Training from “132 kV SUBSTATION SHRINAGAR.”
Projects Minor :- Burger alarm, study of mcbs and
Traffic signal controlled by remote.
Key Skills

1. Communications skills
2. Can work effectively in team, as well as individually.
3. Have good inter-personal skills.
Hobbies and Interests

Playing Cricket, Chess and watch Movies.