Structural Design Engineer Mumbai : Petron Engineering Construction

[muthukalee]

Company Name : Petron Engineering Construction Limited
Company Location : Mumbai
Designation (of vacancy) : Design – Structural Engineer
Company E-mail ID : hr@petronengineering.com
Company Website : http://www.petronengineering.com

Job Description, Candidate Profile, Company Profile, Company Address :

Qualifications : BE Mechanical/ Civil / Structural

Experience : 8-10yrs

Job Description :
* Complete structural design (including determination of primary & secondary members) & modeling of Fired Heater System including heater w/ its platforms, APH/SAPH, ID/FD Fans, Flue gas / Combustion air Ducts and Duct Support Structure etc in STAAD-Pro software.
* Foundation loading calculation for heater, stack, APH/SAPH, ID/FD Fans, pipe racks and duct supporting structure.
* Generation of Foundation Loading Diagram and Base plate drawings for heater and its ancillaries.
* Lifting and transportation analysis and drawings showing transportation saddles, shipping lugs, bracing, spider beam etc.
* Co-ordination and review of work done by Structural detail engineering firm generating steel drawings and fabrication drawings for heater and all its ancillaries.
* Erection drawing & erection sequence.
* Co-ordinate and advise fabrication shop and construction site on all issues related to structural engineering.
* Support “Proposal” dept to generate preliminary steel design and structural estimates.

About us :
Infrastructure is the foundation of a strong economy. With a dream to be a pioneer in world class construction and development, Petron Engineering Construction Limited, came into existence nearly thirty years back. Based on the professional deliverance and commitment levels of its employees and with the focused management vision, the group today has successfully executed nearly 600 projects, for renowned public as well as private sector companies nationwide. These were in diversified sectors like Refineries ( Reformers and Crackers ), Oil & Gas, Power, Cement, Fertilizer & Petrochemical, including specialized Insulation & Refractory work, Fabrication work alongwith Electrical & Instrumentation work.

Contact us :
Petron Engineering Construction Limited
6th Floor, Swastik Chambers, Sion-Trombay Road, Chembur,
Mumbai 400 071, India.

[Guest-IJT]

Dear Madam,
With reference from your site,I wish to subimit my application for a suitable job in your reputed concern .With 15 years of experience I am looking forward to take challenging tasks in the field of sales ,customer support,production management,with thorough knowledge and skillset,in lv switchgear & automation industry. Here with submit my CV for your kind perusal.Expecting your kind reply that would enable to have a session with you to prove my ability and skills.

Thanking you ,
Your,s truly
D.CHINNADURAI


CURRICULAM VITAE

D.CHINNADURAI 4/1,Rajiv Gandhi street,
Mobile:9840105038 Poonamalle High road, E-mai: dcnndr AT yahoo.co.in Avadi,Chennai–600054
Tamilnadu ,INDIA.
-------------------------------------------------------------------------------------------------------------

CAREER OBJECTIVE : To take a challenging position in the field of
Electrical Automation industry.
QUALIFICATION: : Diploma in Electronics & communication
Engineering.

WORK EXPERIENCE III : LARSEN & TOUBRO LTD. (ESE),
SWITCH BOARD MANUFACTURING,
FACILITY,COIMBATORE –641021.

PERIOD : From April 2008 – march 2009

DESIGNATION : Senior Engineer ,

DEPARTMENT : CONTRACT MANGEMENT GROUP

CURRENT C.T.C : 2.2 Lacs / Annum

EXPECTED C.T.C : 3.5 Lacs / Annum

JOB PROFILE :

- Coordinating regional sales and factory,
- Scheduling & Planning for customer inspections inspection calls to customers, consultants as per the contractual delivery plan.
- Raising inspection calls to customers, consultants & third party inspection agencies,
- Verifying inspection documents like approved drawings Quality assurance plan, purchase requisitions
- Coordinating with clients / observance during follow up for timely receipt of release notes / dispatch clearance and documents.
- Coordinate with factory production and design department and ensure timely incorporation of post approval changes, and ensure timely release of design change notes to regional sales for final submission of drawings .
- Ensure timely release of customer rework release note and timely packing of boards for dispatch.
- Preparing dispatch documents like material packing list, road permits, LR copies, Ensure timely receipt of MRC’s from clients

From April 2009 – till date

As Team leader of product development .for a new version of switch board (THUNDER)

ACHEIVEMENTS :

- First in my organization to successfully develop a new version of switchboard with available design, Development includes all type test boards, development fixtures, jigs, tools, Implementation of shop practices and also producing the first set of customer boards meeting all quality and customer requirements
- Ensured completion of the projects within the stipulated time of delivery schedule
there by maintaining the product sigma value with in the nominal level.
- Successfully lead a team of technicians to one of the sites of our valid client and rectified a severe breakdown with in the maintenance schedule and ensured timely start of the production process.
- Team leader of value stream mapping project, ZONE leader for 5S at thunder assembly shop

WORK EXPERIENCE II
ELEKTRO ANLAGEN (P) LTD,CHENNAI-44.
System house for SIEMENS LTD For . SIEMENS, automation .products..
Manufacturers of PLC,MCC,PCC , DRIVE , &
SOFT STARTER control Panels.

DESIGNATION : Engineer Automation & Drives.

PERIOD : From Jan 2007 – March2008

JOB PROFILE:

- Engineering, Execution of Projects , preparing estimates on Projects & On site commissioning
- Handling Shutdown maintenance process

ACHIEVEMENTS :

- First in the organization to develop a bus duct and successfully and install to a 1250 KVA DG SET at site.
- Individually executed a turnkey project of a Huge WIND TUNNEL system comprising a 200kw motor and drive system at APPLIED MECHANICS DEPT In IIT Chennai with self engineering ideas Involving mechanical, civil.& Electrical works




WORK EXPERIENCE.I :

NAME OF THE ORGANISATION : ZEUS SYSTEMS (P) LTD, Chennai- 600049.

COMPANY PROFILE: : Manufacturers of UPS range (from 500va – 20
Kva) ,AC ,DCpower supplies and Electronic
Equipments,

DESIGNATION : Senior Engineer sales & services .

PERIOD : From July 1995-Dec 2006 .

JOB PROFILE:

Position held from July 1995- 1999 : Field service engineer

Maintenance and servicing of Power supplies , Ups systems ,Stabilizers ,Rectifiers &
Inverters Preparing service reports on service activities and AMC follow up
Position held from July 1999- 2006 : Senior engineer – (sales & services)

RESPONSIBILITIES & ACHIEVEMENTS :

- Individually handled the sales team and contributed more than 300 customers to the company’s clientele.
- Achieved a overall sales of 70 lakhs individually through direct marketing.
- Held key responsibilities of decision making handling techno commercial discussions with customers.
- Arranging to conduct exhibition stalls to improve sales
- Conducting surveys on customer satisfaction,
- Deciding the ratings of UPS equipment as per customer requirements , Battery back up calculations and commissioning activities
- Ensure periodic maintenance is carried out regularly as per the contracts.
with proper service records maintained .with customer


TECHNICAL SKILLS / KNOWLEDGE:

- Possess adequate Knowledge with SIEMENS Make AC,DC, and servo Drives & motors ACBs and switch gear devices like MCBs MCCBs MPCBs TIMERs OLRS, contactors DOL,RDOL,HDOL,&^SDL starter circuits
- Possess adequate Knowledge with L&T Make ACBs and switch gear devices like MCCBs MPCBs TIMERs OLRS, contactors EL Relays numerical logic relays, AREVA make lock out relays and MICOM relays ,
- Thorough knowledge in development of LV switchboards, with latest technology updates Shell assembly Integration and testing of MCC,PCC & PMCC switchboards complying to International quality and safety standards
- Brief knowledge in field instruments control, systems like PLC&,SCADA systems
Capable of Reading electrical drawings , Like SLD’s ,GA ,Bill of materials, feeder
list and Power and control logic schemes.
- Preparing estimates for MCC ,PCC, PMCC, Drive and control panels, possess knowledge in standard and non standard design of bus bar links in panel assembly and relevant calculations
- Skilled in soldering and handling testing Equipments like Multi meters Meggars
and ,HV test kits
- Capable of handling , repairing and trouble Shooting of Electronic and Electrical
Equipments Possess adequate knowledge in working with power electronic devices
electrical devices like thyristor based rectifiers and transistor ,MOSFET and IGBT
invertors., UPS systems AC ,DC power supplies and rectifiers
- Capable of handling onsite commissioning and Installation activities
- Possess adequate Knowledge in assembling, testing and maintenance process of lead acid batteries

COMPUTER SKILLS:

Capable of Working with MS-Office, internet E-mail, SAP, for material management

OTHER SKILLS / KNOWLEDGE:

Confident in handling sales / marketing with a high profile skill set of product presentation, Preparing quotations for projects, Handling negotiation & techno-commercial discussions , After sales support to customer, Develop and maintain good relationship with customers and conducting market surveys, preparing client database

ABOUT MYSELF;

Posses good communication skills and attitude of maintaining good relationship with clients, colleagues Ability to initiate any challenging assignments allotted and .can work for long hours with lots of energy and enthusiasm.

PERSONAL INFORMATION;

Date of birth: : 21-06-73

Father’s Name: : M.KDevendran

Nationality : Indian

Marital Status : Married

Languages Known : English ,Tamil ,Hindi (Read, Write ,Speak)

Permanent Address: : No. 4/1Rajiv Gandhi Street,
Poonamallee. High .Road,Avadi
Chennai-600054, Tamilnadu.,India.

E-mail: : dcnndr AT yahoo.co.in

Mobile Number : 9840105038

Passport No. : G-0655910

Date of issue 03-11-2006

Date of expiry: 02-11-2016

DECLARATION:

I solemnly declare that the information furnished above are true to the best of my Knowledge.
Thanking you,

Yours Truly

.Date : 01-09-09
Place : Chennai. (D.CHINNADURAI)

[Guest]

Resume - Structural Engineer Offshore, Oil and Gas, Marine
Naveenkumar K.U
EMAIL : naveenkulnt AT rediffmail.com
naveen.odlme AT gmail.com
BREIF DESCRIPTION
Post Graduate Offshore Structural engineer with more than 4 years experience, with more than 3 years in analysis, design& onsite experienceof offshore structures.
SUMMARY
With more than 3 years structural design and onsite experience for fixed platforms, topsides, jackets, for clients such as ACS Cobra Castor, Escal UGS, BOMEL Ltd., Conoco-Phillips,Maritime Industrial Services Co. Ltd., Dubai Drydocks World, Lamprell plc, Gulf Marine Services W.L.L.
Structural design ability in basic design, detail design, which includes analysis such as inplace, lift, upending, tow, finite element modelling and analysis foroffshoreplatforms, topsides, concept designs, jack ups,equipment foundation designs, thruster foundation design.
Software used includes SACS for modelling and analysis of offshore structures such as jackets, ANSYS 11, GT-Strudl, GT-Selos, ABAQUS, MOSES-Underwent MOSES Training, STAAD PRO, Mathcad, MS-Excel.
QUALIFICATIONS
Post Graduation (M.Tech) in Computer Aided Structural Analysis & Design applied to Offshore Structures in 2007.
Graduation (B.Tech) in 2002.
SUMMARY OF EXPERIENCE
Design
Design/ Analysis of Fixed Offshore Structures, Jack up Rigs (Project in Progress), Concept Structures, Topsides, Equipment Foundations, Thruster Foundations, Offshore Cranes (Modelling and Transportation Analysis).
Hands-on experience in stages of Design Engineering which includes Basic Engineering, Detailed Engineeringof Offshore Structures.
Computer Aided Analysis& Design of Jackets, Topsides, Helidecks,Sea-fastenings, Piping/Equipment Supports, Lifting Pad Eyes, Trunnions, Tubular Joint Design, and preparation of fabrication drawings.
In-place, Load-out, Transportation, Lift (Offshore), Upending, Un-piled Stability Analyses of Offshore Structures.
Analysis of Offshore structures, both local, and global using FEA software
Working Knowledge with Structural/ Naval Software SACS 5.2, ANSYS 11, GT-Strudl, GT-Selos, ABAQUS, NISA,STAAD –PRO, MOSES, Mathcad, MS-Excel
Conversant with Structural Design Codes/Standards API (WSD & LRFD), AISC, NORSOK, DNV Codes & Standards
Preparation of Design Basis, Specifications, MTO/WCR,Structural Drawings,Technical Project Reports, Detailed Design & Analysis Reports
Site, Project Management
Due diligence, construction supervision for Jack up rigs
Review of drawings, reports, acting as owner’s representative and third party inspector.
Issuing of CRS, reviewing the CRS comments, reviewing FCNs
Technical Assistance to Construction Activities
Basic Technical Evaluation, Meeting with Clients/Contractors to ensure compliance with technical specifications & requirements
Site Surveys, Dead Weight Surveys, Inclining Experiment, Loadout procedures, Data Collection and Verification
Maintenance of Document Control Register
SOFTWARE SKILL SET
Structural/ Naval Analysis & Design : SACS 5.2, ANSYS 11, GT-Strudl, GT-Selos, ABAQUS, MOSES-Underwent MOSES Training, STAAD PROSoftware
Packages : MS Office, MathCAD, MATLAB, AutoCAD 2000
Operating Systems : Windows XP/NT/2000, DOS, UNIX
Microsoft Excel : Writing of Spreadsheets for different Structural Engineering Applications using Excel
Report writing / Presentation preparation using Microsoft Word / PowerPoint
CHRONOLOGY OF EMPLOYMENT
Time Period Organization Office Location Position Held
From To
March'08 - Present GL Noble Denton, Sharjah, UAE, Structural
August'07 - October'07 GTR Campbell-SEDS, Cochin, India, Structural Engineer
April’04 – July’05, Larsen & Toubro ECCD, Kolkata, India, Graduate EngineerTrainee
DETAILED WORK EXPERIENCE
GL Noble Denton, Sharjah, UAE (March'08 – Present)
Client :First Energy Bank
Project : Owner’s representative, Due Diligence, Project Management at MIS Yard Khalid Port, Sharjah
Owners Representative and Third Party Inspector at MIS yard, Khalid port, Sharjah for rigs 109, 110, 108. Work includes project management, construction supervision, drawing reviews, design calculation reviews, and providing advice on the construction in the capacity of owner’s representative for rigs 109, 110, and as third party inspectors for the rig 108.
Activities includes carrying out day to day construction supervision, monitoring the project schedule and reporting back to the client, conducting and supervising activities like loadout, inclination experiment, cantilever skidding, cantilever load test, dead weight survey, endurance test of the rig, the documents for incliningexperiment,loadout procedure, cantilever loadout procedure, design documents,drawings arealso reviewed.
The Rigs are ABS Classed.
Client :ACS Cobra Castor, Escal UGS, Spain
Project :CASTOR WHP WELL HEAD PLATFORM PROJECT
Inplace Analysis of the Well Head Platform structure in SACS
The project involved in the Castor Underground Gas Storage Development Project of Escal UGS, the Wellhead Platform (WHP) will be located off Vinaroz, Spain.The platform structure includes one 4-legged jacket in 60 metres of water depth (referred to LAT) with 4 skirt piles in skirt sleeves and topsides.
The main objective of the analysis is to ensure that the structural configuration and the constituent elements of the jacket satisfy the strength, stability and serviceability criteria during in-place conditions as laid down in the Structural Design Basis and API RP 2A-WDS, 21st Edition, AISC, 9th Edition. The analysis has been performed for all the possible loading conditions which are likely to emerge during the lifetime of the jacket.
The analysis has been performed using Pile-Soil-Structure interaction facility available in the SACS software. Non linear simulation of the foundation is considered.Dynamic analysis is carried out to predict the dynamic response of the structure to wave/currentinduced excitation and to predict the fundamental periods of the platform as per thedesign basis.
The document is approved by Lloyds Register.
Client :ACS Cobra Castor, Escal UGS, Spain
Project :CASTOR WHP WELL HEAD PLATFORM PROJECT
Modelling of the Well Head Platform structure in SACS, taking into considerations the as built structural drawings details, the model was then used for various pre-service and operational analysis.
Client :ACS Cobra Castor, Escal UGS, Spain
Project :CASTOR WHP WELL HEAD PLATFORM PROJECT
Lift analysis ofthe Well Head Platform Structure in SACS
The scope the Analysis to verify the structural integrity of the WHP jacket for the initial lift condition from the barge at offshore.The aim of the initial lift analysis is to assess the maximum stresses induced in the jacket members during the lift and to ensure that the member and joint stresses conform to API RP 2A-WDS, 21st Edition, AISC, 9th Edition.
The analysis included the lift study of the Jacket structure off from the barge to its location in the sea for further upending on to the actual location, the analysis also included rigging calculations, an padeye designs using standard spreadsheets in MathCAD and excel.
The document is approved by Lloyds Register.
Client :ACS Cobra Castor, Escal UGS, Spain
Project : CASTOR WHP WELL HEAD PLATFORM PROJECT
Floatation and Upending and Damaged Stability of the Well Head Platform Structure in SACS
Floatation and Upending analysis with controlled flooding of the Well Head Platform was performed to analyse the floatation characteristics of the Well Head Platform after it has been lifted off the cargo barge and lowered into the water, also to evaluate the safe Upending operation of the Well Head Platform once it is stable under its own floating characteristics, the upending is done to its onsite location for furtheroperational activities, the analysis included partial flooding and simultaneous lifting offa crane hook to place the Jacket into the vertical position on the seabed from itshorizontal flooding position, the float module in SACS was made used in the analysis.
Also evaluation of the floatation characteristics of the jacket in an unlikely event of accidental damage to the compartments the jacket legs was performed separately.
Evaluation of the hook/sling loads and flooding requirements during successive stages of upending from the horizontal free floating condition to the final vertical condition was also done and hence included rigging calculations, an Upending padeye designs using standard spreadsheets in MathCAD and excel
The document is approved by Lloyds Register.
Client :BOMEL Ltd.
Project :GREATER EKOFISK AREA 2/4L UTILITY & ACCOMODATIONTOPSIDESMODELLING IN SACS AND TRANSPORTATION ANALYSIS
The project involved the transportation analysis of the Ekofisk 2/4L accommodation platform consists of a 4-legged jacket and a steel topside accommodation module (also referred as topsides) structure providing 522 beds and associated services, utilities, safety equipments and helicopter facilities for the ConcoPhilips Ekofisk Complex. The topsides will be fabricated at Stord, Norway and will be installed at the site at Norwegian sector of the North Sea.
The transportation analysis model is modelled as a stiffened plate structure in SACSwith all the penetrations in the panels are included as per the drawings provided.
The “TOW” module in SACS is used to generate inertia forces encounteredduringtransportation due to the motions of the barge.
SACS IV module is used to generate common solution files for all the stages ofanalysis.“COMBINE” module is used to combine the results of gravity, wind and towanalysis runs. “POST” Module is used to code check the adequacy of the memberswith respect to the stipulations of the codesand also to generate the database forviewing the analysis results.
The module is designed using load and resistance factor design method.
The transportation analysis assessed the maximum stresses induced in the members,and wall panels (with penetrations) of the topsides during the transportation condition,and to ensure that the stresses conform to the allowable limits as perNorwegiancodes NORSOK N-001, NORSOK N-002, NORSOK N-004, NS3472, DNV Rules forPlanning and Execution of Marine Operations, 1996
Weight Control Report is also was prepared for the structure.
Client :BOMEL Ltd.
Project : GREATER EKOFISK AREA 2/4L UTILITY & ACCOMODATION TOPSIDES LIFT ANALYSIS
The scope of the analysis to verify the structural integrity of the Ekofisk 2/4L accommodation topsides for the lift condition from the barge at offshore.
The aim of the lift analysis is to assess the maximum stresses induced in the topsides members during the lift and to ensure that the member stresses conform to the Norwegian codes NORSOK N-001, NORSOK N-002, NORSOK N-004, NS3472, DNV Rules for Planning and Execution of Marine Operations, 1996.
The accommodation modules will be lifted using heavy lift vessel Saipem 7000. Thedual cranes will work in tandem to lift the deck and position it on the jacket. It isassumed that the cranes work in perfect tandem.
The module is designed using load and resistance factor design method.
The analysis consisted of preparing a detailed model in SACS using plate and beamelements. Load was applied as pressure load, lineloads, concentrated loads on theplates and beams. A detailed MTO report was also prepared and the model weightwas matched with that of the MTO. The analysis was done for normal and skew liftcases. Results were obtained as lst/GUI.
Client :MARITIME INDUSTRIAL SERVICES CO. LTD
Project : CONCEPT DESIGN OF FINGER PIER FOR LOADOUT
OF NEWLY BUILT JACKUP RIGS AT MIS YARD, SHARJAH, Paper on this analysis selected for the GT-STRUDL users conference held at Georgia Tec. University
The project concerns with the concept structuraldesign and analysis of Finger Pier Pontoons to be used for the load out of jack-up rigs by MIS, Sharjah.The Finger Pier supports the rig during the load out and aretwo in number.Each of them carries a skid which assist the movement of rig.The pontoons are connected to each other by tubular braces which are designed to carry only axial loads. The suitable locking arrangement of these braces with the pontoons assists them in adjusting with minor relative settlement.
The FiniteElement Modelling was carried out with GT STRUDLand the loading was applied according to the expected distribution during the loadout of the jackup rig.Plate elements were used to prepare the model.The effectof moving load from the rig during loadout has been simulated and hence the pontoon is analyzed at different stages.
The drawings for the concept design are reviewed.
The scantlings were checked with reference to ABS, Rules for building and classing steel Barges.
Client :MARITIME INDUSTRIAL SERVICES CO. LTD
Project : CONCEPT DESIGN OF FINGER PIER FOR LOADOUT
OF NEWLY BUILT JACKUP RIGS AT MIS YARD, SHARJAH, ON BOTTOM STABILITY OF THE PRELOAD UNIT
The analysis included a preload unit used to preload the seabed before an actual loadout activity on to the Finger Pier, the onbottom stability of the preload unit is studied in GT STRUDL, and GT SELOS-the offshore package of GT STRUDL. The overturning moment and base shear is extracted from the analysis, and the on bottom stability of the preload structure is asserted.
Client : GULF MARINE SERVICES W.L.L.
Project : MSC NG-2500x JACK-UP UNIT“GMS ENDURANCE”
Worked as a Structural Engineer on detail engineering of new built “Self propelledJackup rig”. Involved in guiding drafts man. Responsibility taken for coordination withInter discipline, client & basic designer. All primary drawings and documents areapproved by ABS.
Client:Seawolf Oilfield Services Limited
Project: Random visual inspection/review MIS drawing and design details/check calculation of welding.
Seawolf Oilfield Services Ltd. Have two of their rigs built and erected by MIS Co. Ltd. Inc., the inspection was targeted at checking and verifying certain leg brace welds for their confirmation as per AWS D 1.1

Random visual inspection/review MIS drawing and design details/check calculation of welding.
Client: DUBAI DRYDOCKSWORLD
Project: Transportation Analysis of 20,000 Tonnes Shear Leg Crane
The transportation analysis involved modeling of the Shear Leg Crane in GT STRUDL and analysing the same in GT STRUDL for various transportation loads which included wind and sealoads.
Client: GULF MARINE SERVICES W.L.L.
Project: MSC NG-2500x JACK-UP UNIT“GMS ENDURANCE”
FEM Modelling and Analysis of Aft/Fwd Thruster Foundations
The aft/ fwd thruster foundation is designed to support the thruster. The ability ofcurrent scantling to resist the static loads coming from the thrusters is checked andthe adequacy of the foundation furnished by the vendor to support such equipment isalso checked.
A finite element model of the beam supporting the thruster is developed using plateelements in GT STRUDL The beams were modeled as finite element with the detailsconfirming to the drawings.
Dynamic analysis was performed to extract the natural frequency of the thrusterfoundation structure and compared with the propeller blade frequency.
Drawings for the thruster foundation are reviewed.
All primary drawings and documents areapproved by ABS.
Client: Lamprell plc
Project: Lamprell Seajack Lift Barge Crane Foundations, Anchor Winch Foundation Design
Handcalculations to design certain crane foundations and anchor winch foundations on the Lift Barge.
All primary drawings and documents areapproved by ABS.
Client: PUNJ LLOYD LTD.
Project: Alpha Admi Pipe transportation and Seafastening Design
Design of Seafastening lashing supports, pitch stoppers, roll stoppers for the pipe lay barge using standard spreadsheets and hand calculations the pipelay barge.
Client: Lamprell plc
Project: Lamprell Seajack Lift Barge Deckhouse Lifting Analysis
Modelling of Funnel House in GT Strudl, Lifting analysis in GT-Strudl, design of rigging, designof padeyes for lifting.
All primary drawings and documents areapproved by ABS.
Standard Spreadsheets preparations and review
Preparation and review of standard spreadsheets in accordance with Noble Denton standards, spreadsheets includes design of plates with stiffeners, design of beam-columns, design of columns, design of padeyes, design for beam analysis.
GTR Campbell-SEDS Cochin, Kerala, India (August'07 - October'07)
Client: TSUJI SHIPYARD LTD.
Project: Modelling & Analysis of 37 DWT Bulk Carrier Ship
The analysis involves finite element modeling of the 37 DWT bulk carrier, global strength FE analysis to assess the global strength of primary supporting members of the cargo hold structure, detailed stress assessment to assess highly stressed areas with refined meshes and hot spot stress analysis to calculate hot spot stresses at stress concentration points with very fine meshes for fatigue strength assessment.
Finite element modeling is done using the finite element software FEMAP. Elementsused arequadrilateral elements for plate structures, beam elements for longitudinalstiffeners and rod elements for web stiffeners and face plates of primary supporting members.
Loading and boundary conditions are given using the software ABS/TSA
Solving is done using MSC.Nastran.
The documents are approved by ABS.
LARSEN & TOUBRO, ECC Division, Kolkatta Region (April’04 – July’05)
Worked as Graduate Engineer Trainee
M.Tech Thesis
M.Tech Thesis: Design & Analysis of Cardiovascular Stents using ANSYS 11
Affiliation: Sree Chittira Institute of Biomedical research, Biomedical
Technology Wing, Thiruvananthapuram, Kerala, India
The M.tech project consists of designing, & analysis of Cardiovascular stents, the project is affiliated with a reputed research, & development institute in the field of Biomedical engineering
A Cardiovascular stent is designed, & then the analysis is carried out.
The problem involves non – linearity on account of, Contact between Stent, & artery, Material non linearities, Large deformations
PUBLICATIONS/ CONFERENCE
Paper titled ‘A methodology for studying the characteristics of expansion of stent likestructures in a hyper elastic artery model’ accepted for International Conference OnModelling And Simulation and publication in the conference proceedings.Organizedby International Association for Modelling and Simulation Technique in Enterprise,France, and Department of Applied Physics, University of Calcutta.
The project CONCEPT DESIGN OF FINGER PIER FOR LOADOUTOF NEWLYBUILT JACKUP RIGS AT MIS YARD, SHARJAHselected for the GT-STRUDL usersconference held at Georgia Tec. University.