CATIA Drafting, 3D Modelling Design Engineer Bangalore : www.broosenbrookse.com Broose & Brookse Consultancy Services

[muthukalee]

Broose & Brookse Consultancy Services Bangalore : Design Engg (on Contract)

Company Name : Broose & Brookse Consultancy Services
Company Location : Bangalore
Designation (of vacancy) : Design Engg (on Contract)
Company E-mail ID : info@broosenbrookse.com
Company Website : www.broosenbrookse.com

Job Description, Candidate Profile, Company Profile, Company Address :

Diploma in Mechanical Engineering with proficiency in 3D Modeling software especially CATIA & drafting Software.

Exp : around 6 months

Job Type :Contract

Location : ISTRAC(ISRO) Bangalore

Requirement very urgent candidate can join immediately on selection.

If Interested or for any further clarification contact on the mentioned nos. 25240007 / 9972567107.

About Us :
Broose & Brookse was established in 1994, and has been masterminded and promoted for over the years by professionals of experience in Aerospace, Defense research, Avionics and the air force and has on board many consultants of national and international repute. Backed by a pool of quality Mechanical/Electronics/Software Engineering professionals who possess expertise in diverse industrial sectors; we bring in professional, value-added and cost-effective Engineering services to address the need of various sectors of Engineering industry.

Contact us :
Broose & Brookse Consultancy Services
No. 136/2, Nagavara Palaya
C.V Raman Nagar
Bangalore-560 093
Karnataka,India.

[ahire.ranjeet]

Sir,
I am Ranjeet S.Ahire Appeared for B.E.(Mechanical). Now i am Completed course of Catia v5,proe3 & unigraphis-6. I would like to apply for post which matches to my profile in your esteemed organisation. I zealously believe that I possess well accomplished skills matching this job.
Hereby I assure you that on the event of my placement I would play my honest role in the future endeavors promoted by the organisation. I pledge for my earnest presence in the development of the organisation during the forthcoming days. As a part of the organisation I would recuperate my skills in future to serve the organisation better.
Here I enclose my Resume for your verification purpose. I am eagerly waiting for your favorable reply.
Thanking You.
CURRICULUM VITAE
NAME : AHIRE RANJEET SUPDU.

CONTACT : 020- 27461091 Email: ahire.ranjeet AT gmail.com MOBILE : /
CAREER OBJECTIVES :
Getting a challenging position where my personal,professional and academic skill can develop while contributing towards the organization goal.
EDUCATIONAL QUALIFICATION :

Course
Percentage
Class Month & Year
Of Passing
Institute/university
B.E [MECH] -
Appeared 2010-11 Pimpri Chinchwad College of Engineering, Pune University.
T.E [MECH] 57.2% Higher
Second
Aug 2009 Pimpri Chinchwad College of Engineering, Pune University.
S.E [MECH] 45.13% Pass
Aug 2008 Pimpri Chinchwad College of Engineering, Pune University.
F.E [MECH] 45.30% Pass
July 2007 Pimpri Chinchwad College of Engineering, Pune University.
H.S.C. 50.00% Second
July 2003 Shri Mahalsakant Mahavidyalay, Akurdi, Pune-44.
S.S.C.
66.26%
First July2001 Vikas Madhyamik Vidyalay, Morwadi, Chinchwad, Pune-19.
OTHER QUALIFICATION :
A Certified course of 1Yrs duration in Information Technology From NIIT,
Pimpri, Pune-411018.
COMPUTER KNOWLEDGE :
Master Diploma in Modeling and Analysis from CADD CENTRE.
- CATIA V5R17
- PRO/E
- UNIGRAPHICS-6
- Other Package :
Knowledge of MS-Office, Windows98, Windows-XP.
Basic knowledge of C-Language.
SEMINAR :
“ SMART VEHICLES ”
A smart-vehicle system involves sensor-based systems, which continuously evaluate the surroundings of the vehicle, display relevant information to the driver and might even take control of the vehicle.
In this seminar we will have a look at the latest technologies developed by the manufacturers all over the world.
- Elective Subjects :-
:- Collision avoidance.
:- Adaptive cruise control.
:- Imaging.
. :- Navigational aids.

[Guest]

RESUME
S.J.SUNIL
E-mail : sunil.aviator AT gmail.com
CAREER OBJECTIVE :
To secure a challenging position where I can effectively contribute my skills to fulfill the organization needs.
EDUCATIONAL QUALIFICATION :
Qualification
School/College
University/Board
Month-year
Percentage
B.E[AERO]
Noorul Islam College of Engineering,Kumaracoil
Anna University
Tirunelveli
April 2011
78.34%
H.S.C
S.L.B.Govt.Hr.Sec.School
Nagercoil
Tamil Nadu state Board
March 2007
81.91%
S.S.L.C
Salvation Army Hr.Sec.School,Nagercoil
Matric
March 2005
81%
ACADEMIC PROJECT :
Project Topic : “ MANUFACTURE AND ASSEMBLY OF HORIZONTAL STABILIZER
FOR INTERMEDIATE JET TRAINER”.
Aim of the project :
To manufacture and assemble a horizontal stabilizer( Tail Plane) for a jet trainer aircraft with less weight.
COMPUTER SKILLS :
- Plat Form : WINDOWS XP,VISTA, SEVEN
- Software Packages : MS Office, AUTOCAD, CATIA.
- Geometric Dimensioning and Tolerancing concepts.
EXTRA CO-CURRICULAR ACTIVITIES :
- Active volunteer in NSS and RCC
- Class Reprensentative
- Convenor in Discipline committee of our symposium AVIATORS’11
AREA OF INTEREST :
- Aircraft Structures
- Propulsion
INTER-PERSONAL SKILLS :
- Possess good leadership and team work capacity.
- Not being tensed in Critical situation.
- Possess capability to adopt changes.
HOBBIES :
- Playing Chess.
- Gathering General knowledge from different sources.
- Playing Musical Keyboard.

[Guest]

Email : nagaraja1m AT gmail.com
Nagaraja M
Objective To develop my career as a resourceful engineer in the industry where, I will be a valuable team member contributing quality ideas and where there is an ample scope for personal as well as organization growth.
Experience Sep 2010 – till date HAL Engine & ARDC Division HAL, Bangalore
Design and Quality trainee engineer
- GE Project test bed fixed frame design using AutoDesk Inventor 2010 software and analysis using ANSYS 11.0 software.
- Detail design using drafting module.
- Shakti engine test bed oil pump design using AutoDesk Inventor 2010 both surface and part design.
- Coupling plate design and analysis using Autodesk Inventor 2010.
- Thrust stand design using Autodesk Inventor 2010.
- Design of spar elements and rib structures using Catia V5.
- I had worked for few months in Adour engine inspection department as a trainee.
Feb `10 – June `10 e-fort technologies Bangalore
Design engineer
- Training on Catia V5 for 4 months
- Projects on mechanical elements..
Sep`09 – jan`09 United motors Hosakote, Bangalore
Design and quality engineer
- Part drawings preparation for every client drawings.
Inspection of incoming goods, Bill of material preparation and process planning of each and every assembly..
- Projects worked on Sandvik, BEML, Italian components like Track frames and etc.
Academic project
- “Process planning and Fabrication of Spar #6 on Air Wing component”, from HAL ARDC Division under the guidance of Mr. Shiva Kumar, Sr. manager, CNC Department.
Education 2005 - 2009 VTU, Belgaum Bangalore
- B.E., MECHANICAL Engineering at Sri Bhagawan Mahaveer Jain College of Engineering.
- Graduated first class with distinction, with an aggregate of 70.27%.
- Pre university with class second class (58.57%) at Govt. Boys College in the year 1999.
- SSLC with first class (72.00%) at Sri Siddhartha School, Kolar in the year 1997.
Interests
Course
Interested to work in aerospace domain like Design of aero structures, analysis using analytical and different software’s and also in mechanical elements.
Structural analysis and Design Optimization of Mechanical elements from Indian Institute of science, Bangalore. .
Software’s
Personal Operating systems : windows98/2000/XP, Unix. And MS Office.
Mechanical software’s : Autodesk CAD 2010, Autodesk Inventor 2010, ANSYS 11.0, Workbench, CATIA V5 R18,
Programming software’s: C, C++, Core Java.

[Guest]

CURRICULAM VITAE
1) NAME :- NAGESH.M.HANCHE

E-Mail : 1) shgena AT gmail.com
2) shgena AT rediffmail.com
3) nagesh. hanche AT facebook.com
5) SKILLS :

i) OS Environment : Windows 95, 98 & 2000,windows XP,windows 7
ii) computer Languages : C, c++.
iii) Office Tools : MS-Office for Windows, AUTOCAD 2007, STAAD PRO
ACADEMIC PROFILE :
Course
Institution Board/University Year of passing Percentage
S.S.L.C KANNADA CONVENT
PRIMARY AND HIGH
SCHOOL
KARNATAKA SECONDARY SCHOOL EDUCATION BOARD
JUNE-2002
84.33%
PUC SHARAN BASVESHWARA COLLEGE OF SCIENCE
KARANATAKA
PRE-UNIVERSITY BOARD
JUNE-2004
74.89%
B.E ( CIVIL )
POOJYA DODAAPPA APPA COLLEGE OF
ENGINEERING
VISHWESHWARAYYA
TECHNOLOGICAL
UNIVERSITY
BELGAUM.
2005-09
67.52%
M.TECH
( STRUCTURAL ENGINEERING ) POOJYA DODAAPPA APPA COLLEGE OF
ENGINEERING AN
AUTONOMOUS INSTITUTION AFFILIATED TO VTU
BELGAUM.

2009-11
73%
Work experience :-
SANGAM TECHNICAL CONSULTANTS PVT. LTD
GULBARGA- 585105.
Design engineer & Project Incharge FROM
1st MARCH 2010
TO TILL DATE. JAL NIRMAL PROJECT
( Under KRWSSA,World bank Assistant)
- Distribution Design in
Loop Version - 4.
- Raising Main Design in MS - Excel.
- Distribution Drawings and Raising Main L- Section in Auto Cad.
- Design, Drawings and Estimates of Water Supply in MS - Excel, MS-Word, Auto Cad.
Preparation of DSR’s & Estimates, in MS- Excel and MS Word

TO WHOM SO EVER IT MAY CONCERN
EXPERINCE CERTIFICATE
This is to that Mr. NAGESH.M.HANCHE has worked as DESIGN ENIGINEER &
PROJECT INCHARGE in Sangam Techanical Consultants Pvt.Ltd Gulbarga
Support Agency for the “ JAL NIRMAL” Project (world Bank Assisted Project )
Since MARCH- 2010 to TILL DATE. his work and conduct has found to be satisfactory .