IOCL Haldia Recruitment 2011 www.iocl.com : Mechanical Engineer

[Admin]

Indian Oil Corporation Limited
Pipelines Division, Paradip Haldia Barauni Pipeline
Vill: Kasberia, PO: Khanjanchak – Haldia
Distt: Purba Medinipur – 721 602 (West Bengal)

Indian Oil Corporation Limited is the largest commercial undertaking and India’s No. 1 Company in the Fortune magazine’s prestigious listing of the world’s 500 largest corporations. Indian Oil’s Pipeline Division owns and operates the largest network of over 10,000 kms of petroleum products and crude oil cross-country pipelines. Paradip Haldia Barauni Pipeline (PHBPL) transports crude oil from Paradip Port to Haldia, Barauni Refinery, and Bongaigaon Refinery.

Name of the Organization : Indian Oil Corporation Limited (IOCL)
Company Address :
Indian Oil Corporation Ltd,
Corporate Office,
3079/3,
J B Tito Marg,
Sadiq Nagar,
New Delhi - 110049

Name of the Post :
Engineering Assistant (Mechanical)

Age Limit :
Between 18 and 26 years as on 01.02.2011

Qualification:
3 years Full Time Diploma in Mechanical/Automobile engineering from a recognized Institute with minimum 55% marks.

Pay scale :Rs.11900-32000

Application fees :
Application Fee (non-refundable) of Rs.100/-(Rupees One Hundred only) through crossed Demand Draft in favour of INDIAN OIL CORPORATION LIMITED.- PIPELINES DIVISION payable at State Bank of India, Haldia Refinery Campus Branch (Bank Code – 7090)
SELECTION METHODOLOGY:
The selection methodology will comprise Written Test followed by Trade test and Personal Interview of successful candidates from Written Test.
How to Apply :
Send filled application form and copies of certificate to
Senior Human Resource Manager, Indian Oil Corporation Limited (Pipelines Division), Paradip Haldia Barauni Pipeline, Vill: Kasberia, PO: Khanjanchak – Haldia, Distt: Purba Medinipur – 721 602 (West Bengal)

Last Date of Application Receipt :15.02.2011.

Detailed Advertisement : http://www.iocl.com/download/Website...0th_jan_11.pdf

Application form Download :http://www.iocl.com/download/Website...0th_jan_11.pdf

Company profile :
Indian Oil Corporation Ltd. is India's largest company by sales with a turnover of Rs. 271,074 crore and profit of Rs. 10,221 crore for the year 2009-10. Indian Oil is the highest ranked Indian company in the latest Fortune ‘Global 500’ listings, ranked at the 125th position. IndianOil's vision is driven by a group of dynamic leaders who have made it a name to reckon with.

[Guest-IJT]

Name : Nilesh Vyas
Email : nileshvyas1784 AT gmail.com
Designation / Skillset : Mechanical engineer with exp. 01year ang 06 month.
To,
H.R.Manager

Dear sir/madam,
I am extremely delighted to be applying for as mechanical engineer in your company. I thrust that my qualifications and skills ideally match with the job profile of this position. I have B.E. degree in Mechanical engineering and one and half years of industry exp.in steel & automobile industry.
I hope to receive a call or an e-mail from you soon.
Thanks
Your Truly
Date-22/05/2011 Nilesh vyas

Resume :
CURRICULUM VITAE
Career Objective :-
To achieve success in the field where I will work & contribute my skills & talent towards both organization & my future.
Experience :-
1. Working in Magadh Precision Equipment Limited, Dewas (M.P.) as Project Planning Engineer and Production Engineer from 1st July 2007.to Jun 2008.
Company Profile
MPEL is an ISO 9001 :2000 certified company engaged in the manufacturing of equipment for Cold Rolling Mill.
Company manufacture equipment for Pickling Line, Cold Rolling Mill, Continuous Galvanizing line and other all related equipment.
Responsibility -
- Material management and follow up of various Project Planning.
- Handle manufacturing of parts of various project Equipment in workshop.
2. Working in EICHER ENGINEERING COMPONENT, Dewas (M.P) as Production engineer from Jun 2008 to Sep.2008.
Professional Qualifications :-

- Bachelor of Engineering in Mechanical from Jawaharlal Institute of Technology khargone M.P. in 2006.
- All India High secondary School from G.H.S.S, Khargone M.P. in 2002
- All India High School from Nitin Flower School, Kannod M.P in 2000.
Projects : -
Major Project
Project Title- AUTOMATIC ROBOTIC ARM
Aim- It is a project, which is used for, pick & place operation of different thing in its working envelope area.
Tools Used End effectors.
Team Size- 7
Key learning- Picking & placing operations.
Minor Project :
Project Title- HYBRID Vehicle
Aim- To reduce the fuel consumption.
Team size- 4
My Role- Analysis & study
Trainings : -
- Indo German Tool Room from Indore (M.P) for 3 weeks.

Computer Skills : -
- Operating Systems- Windows 98/2000/XP
- Tools- Ms Office, AUTO CAD 2004
Are of interest : -
- Project Planning Engineering and Production Engineering Field.
Declaration : -
I here by declare that all the information given above is true to the best of my knowledge and belief.
Date : 22/05/2011
Your Truly
Nilesh Vyas
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4161021
Date & Time : 22nd May 2011 12:08 PM (UTC)
IP Address : 110.226.130.179
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
Predicted Country : Australia

[Guest]

CURRICULUM VITAE
Of
MOHAMMED ZUBAIRUDDIN
Position : Project Engineer (Reporting to Project Manager)
Total Work Experience : 06 years
Education Qualification : Mechanical Engineer
SUMMARY OF EXPERIENCE :
Currently providing services as Sr. Project Engineer to M/s SAIPEM Ltd/ETE for their ongoing projects to this assignments I performed almost similar duties as Project Engineer M/s SAIPEM Ltd/ETE comprising numerous & diversified assignments for Project Execution & coordination of overall Construction & Execution Process.
Earlier than this position in the construction industry I rendered my services to M/s NTPC /Kalva Engineering pvt ltd India. My responsibilities included Reviewing of the Engineering Drawings for execution and its system, General supervision, logistic coordination, control/review/scheduling/implementation of all elements for smooth running of Projects.
As a representative of a General Contractors, some of my recent assignments have also included : Projects management team at SAIPEM Ltd. My responsibilities also included for all site technical queries, quality control documentation updates, performing the execution of all the Mechanical activities, safety & security procedure, and selection of the material as per project specifications.
In addition, the services which I have been providing since beginning for throughout my employment history included : All kind of Survey control, Computer generated drawings, material testing, shop drawings, supervision & quality monitoring of Installation of Pipe execution of projects using ASTM ASME, API-1104 codes as required, Quality & quantity control, QA/QC Management, Document reviewing, Project scheduling & progress monitoring, for the Multi storied Buildings, oil and gas plant, power plants and Infrastructural projects.
Objective

Mechanical Engineer, ASNT Level II & with Five years hand on experience :
- Five years experience in construction for industrial Project Construction, Fabrication, Testing & Commissioning (Pipelines/piping & structures).
- Two years in Inspection & Maintenance for Industrial equipment, Rotating & Static Equipment (shut down, Schedule & PM and Running Breakdown, Trouble shooting & Fault Analyses)
- Seeking a suitable position in accordance with my work experience and skills gained over the years to the full extent for development, thereby contributing to the overall growth and profitability of the organization as well as attaining self-growth in career.
Personal Profile
I am having more than five years work experience as a Project Engineer. At present, I am working in Eastern Trading & Cont. Est. in Saudi Arabia for the last Four years. Very focused with high personalized service for management satisfaction, hard working and optimistic attitude towards goals, very friendly nature and good communication skills in English, Hindi/Urdu and Telgu.
Work Experience
I : Company : Eastern Trading & Cont. Est., Saudi Arabia
Profile : Company performing massive construction of substation building, power
Plants, water injection plants, gas plants, including structure steel, piping,
Rotating equipments, HAVC, static power generating equipment.
Period : November 2007 to till now
Position : Project Engineer
Department : construction
PROJECT : MANIFA CORE-HYDRO CARBON REFINERY SAUDI ARABIA (CURRENT PROJECT)
My jobs responsibilities include;
- Site survey and pipe installation for process piping and underground oily water system (RTR,FW,SWS,DW)
- Solving the Technical Query for any execution obstructions.
- Making spooling drawing for preparation of spools and installation at site as per IFC drawings.
- Making hydrotest packages for testing of line such as forced line, gravity line fire water lines.
- Raising RFI for inspection to PID, for site surveillance and inspection for each activity.
- Sound knowledge for Hydrotest and gravity testing activates.
- Coordinating with clients for RFI, Hold & witness Points & arranging Inspection/test as required in contact.
- HSE Policy to consider first as step to success, effectively communicated to everyone & implementation in team. Attached with chief safety officer for safety related matters on Site.
- Keeping up to date on the latest standards & technological advances in engineering material & testing.
- Planning the entire necessary inspection/quality test as per clients’ requirement/applicable codes & schedules.
- Always consider safety as step to success.

A) PROJECT : KING ABDULLAH UNIVERSITY OF SCIENCE & TECHNOLOGY

My jobs responsibilities include;
- Heading a team of Designers and CAD draftsmen specialized in producing shop drawings.
- Coordination with engineers of other trades to produce combined services drawings.
- Attend regular meetings with the client & consultant to solve technical issues and to review the status of the project.
- Resolve the site CSD clashes.
- Reviewing the Technical issues and raising SCR’s (site clarification request)
- Leading a team of Engineers and Foreman’s to execute the jobs.
- Responsible for Construction works and concepts under non-disclosure agreements for clients on cross-functional design teams which include Sr. Mechanical, Electrical, and Product Designers. Responsibilities included Piping, Welding design with 3D solid and surface models in Pro/Engineer, concept development, site strategy, and presentation preparation.
- Supporting Integrated Platform Solutions in the design and integration of Tactical Operation.
- Direct the field commissioning of a project.
B) PROJECT : SAUDI ARAMCO UTHMANIYAH WIPS PROJECT
My jobs responsibilities include;
- Preparation of shop drawings (CSD, ISD, Sectional) complying the contract specification, consultant requirements.
- Co-ordination with Fire Fighting, HVAC, and Fire alarm Plumbing and SAS &FGS.
- Contractual, structural, architectural, other services Drawing study & Site visit (if required).
- Verifying, Overall quality checking and standardization of shop drawings before submission.
- Leading a team of Mechanical co coordinators, engineers and guiding them for developing shop drawings.
- Revising, Rerouting, resizing & Coordinating the MEP services with other services passage etc.
- Frequent meeting with other services Engineers, converse the deviations & solutions etc.
- Collection and maintenance of service related documents such as Consultant comment, Supplier’s manual, other documents supporting the drawing.
C) PROJECT : SAUDI ARAMCO HARADH OIL AND GAS SEPRATION PROJECT
My jobs responsibilities include;
- Major duties include repair of all mechanical equipment on site, some of which
are six units of ABB Gas Turbines GT-35C, Alfa Laval Centrifuges, Nitrogen
Generation Packages, Nuovo Pignone gas Compressors (reciprocating)
and associated equipment, as well as water injection systems, various types
of air compressors and Flowserve (BWIP) main oil booster and shipping pumps.
- Installation & Commissioning works of mechanical equipment such as pumps, compressors, production separators and chemical injection skids.
- Heat exchangers, Receprocating compressors, Degasser and booster pumps, control valves, and participation.
- Verifying, Overall quality checking and standardization of shop drawings before submission.
- Leading a team of Mechanical co coordinators, engineers and guiding them for developing shop drawings.
- Revising, Rerouting, resizing & Coordinating the MEP services with other services passage etc.
- Frequent meeting with other services Engineers, converse the deviations & solutions etc.
- Collection and maintenance of service related documents such as Consultant comment, Supplier’s manual, other documents supporting the drawing.
II : Company : Kalva Engineering Private Limited, Hyderabad, India
Profile : All Mechanical Inspections such as Welding Inspection, Material Inspection
& Visual Inspection by NDT Process (Non Destructive Testing) and
Conducting Technical & Management Programs.
Period : May 2005 to October 2007
Position : Mechanical Engineer
Department : construction

A) PROJECT : NATIONAL THERMAL POWER PLANT

My jobs responsibilities include;
- Contractual, structural, architectural, other services Drawing study & Site visit (If required).
- Verifying, Overall quality checking and standardization of shop drawings before submission.
- Leading a team of Mechanical co coordinators, engineers and guiding them for developing shop drawings.
- Frequent meeting with other services Engineers, converse the deviations & solutions etc.
- Collection and maintenance of service related documents such as Consultant comment, Supplier’s manual, other documents supporting the drawing.
B) PROJECT : M/s. BHARAT DYNAMIC LIMITED. India

My jobs responsibilities include;
- Inspection of Materials by Visual method and NDT Process
- Preparing Inspection report as per ISO Standard and maintaining the records.
- Contractual, structural and other services Drawings study & Site visit (If required).
C) PROJECT : RELIANCE PETROLEUM REFINERY. India
My jobs responsibilities include;
- Inspection of Process pipeline welding by Ultrasonic Testing.
- Preparing the Quality Documents as per Client Requirements.
- Inspects processing and storage tanks, pipelines and fittings, stills, towers, and pumping units for defects, following specified inspection procedures.
- Examines mechanical installations, instrumentation, valves, and fittings for defects, such as cracks, corrosion, and leaks.
- Measures thickness of tank walls, tower walls, and pipelines, using calipers and electronic instruments, to determine extent of corrosive damage
- Drills test holes in tank and tower walls to take samples of corrosive deposits and verify extent of damage.
- Installs probes and other instruments in tanks and towers to obtain samples of corrosive deposits and to measure rate of corrosion.
- Prepares inspection reports to indicate nature of repairs and replacements required and to specify safe limits of temperature and pressure to follow pending repair of unit.
D) PROJECT : LEE HYDRALIUC AND FASTENERS, India
My jobs responsibilities include;
- Visual inspection of welds before welding, during welding and after welding
- Familiar with different inspection methods, codes, ISO, P&ID.
- Review contract documents, drawings, QAP, and QCP.
- Witnessing of fit up, welding visual,
- Monitoring documentation and all site activities as per ITP and according to
Codes, specification and standards
- Witnessing of hydro test and pneumatic test.
- Witness Materials receiving and record keeping.
- Daily inspection of joints and preparing curing reports,
- Maintaining weekly performance record
- Involved in inspection of painting, fire proofing, wrapping coating, cathode production, insulation and structural inspection.
- Involved in Test pack clearance as per system.
Knowledge In Codes
KEY SKILL & EXPERIENCE AREAS:
1.CONVERSENT WITH CODES LIKE
ASME 31.3, DESIGN &ASSESMENT OF FITNESS FOR SERVICE OF PROCESS PIPING;
API 571, CORROSION& DAMAGE MECHANISM LEADING TO DETERIORATION OF PROCESS EQUIPMENT;
API 579, RISK BASED INSPECTION.
2. FAMILIARIZE & MAINTAIN KNOWLEDGE OF HSE PROCEDURES, RULES& REGULATIONS.
- AWWA C950 (American water works association)
- UPS (Uniform plumbing standard)
- Saudi Aramco Engineering Standard (SAES) Sanitary sewers.
- SAES-S-010, Industrial drains and sewers.
- SAES-S-020, Potable water system.
- SAES-S-040.
- ASTM D2321.
- ASTM D2564.
- ASTM F402.
Educational Qualification
- Bachelor of Technology in Mechanical Engineering. (B.Tech)
INSTITUTION OF MECHANICAL ENGINEERS, INDIA.
Educational Qualification
Additional Qualification
- Diploma in Reinforcement Thermosetting Resin. (RTR)
AMIANTIT BONDSTRAND, LTD. DAMMAM, SAUDI ARABIA./FUTURE PIPE INDUSTRIE.
- INDIAN SOCIETY OF SANITARY ENGINEERS (ISSE)
ANDHARA PRADESH, INDIA.

- SMAW WELDING COURES
ADVANCE TRANING INSTITUTION HYDERABAD, INIDA.
- SAFETY ORGANIZATION OF INDIA
S.D.M INSTITUTION HYDERABAD, INIDA.
- American Society of Non- Destructive Testing ( NDT Level II )
KALVA INSTITUTE OF ENGINEERING HYDERABAD, INDIA.
Computer Skills
- Efficient working knowledge of Microsoft Office 2000-02, 2007, Word, Excel, PowerPoint, Internet.
- Knowledge of English typing.

[Guest]

PRAVEEN KUMAR MOVVA
E-Mail ID : pravinmovva AT gmail.com

Career Objective
To strive for excellence in any endeavor taken up abreast the constant learning process, which would hone my skills to perfection and enhance my performance to meet the organizational goals.
Education
Year Examination Institute Board/University %
2011

B.Tech. (MECH)
Vidya Jyothi Institute Of Technology. JNTU
Hyderabad 69.84
2007 Intermediate Narayana Junior College, S.R.Nagar,Hyderabad Board of Intermediate, A P 76.00
2005 SSC (10th) Nagarjuna High School, S.R.Nagar, Hyderabad Secondary School Certificate, A P 72.66
Skills & Proficiencies
Design Languages : Solid edge ,Pro-e(Basics).

Academic Projects
MINI PROJECT
Project Name : Advanced Technology with Hybrid Turbocharger

Project Description : Increase Performance of an engine to increase fuel efficiency by using waste gases(exhaust gases).
MAIN PROJECT
Project Name : Design &Manufacturing of an E-CAR BUMPER using Pro-e & cosmos.
Project Description : Design of an E-CAR bumper which runs using battery as well as wind energy. And its impact analysis and its aerodynamics etc.
Activities :
- Secured first prize Woolley ball held at Vidya Jyothi Inst Of Tech(VJIT).
- Secured second prize in caroms held at VJIT
Personal Skills
- Good Communication skills.
- Good leadership qualities.
- Good computer proficiency.
- Self motivated with high level of commitment.
- Ready to take up new challenges.
Personal Interests
- Playing snooker.
- Playing football.
- Listening to music.

[Guest]

With reference to your e-mail career AT uralindia.co.in in my e-mail account skasik19 AT gmail.com , I beg to offer myself as a candidate for any post of your Ural Company in Haldia. I am in awfully need of a job. I am sending my C.V with this application and all my particulars will give you during Interview.

I am Sk Asik Sultan.
CURRICULAM VITAE
Name : SK ASIK SULTAN.
Educational Qualification (General) :
Examination Passed Name of school result
Secondary Karak S.S High School 75%
Higher Secondary (science) Chakdwipa High School 50%

Educational Qualification (Technical) :
Examination Passed Name of college result
Diploma in computer science Global Institute of Science & Tech 70%
Interests :
I wanted to work any task with my heart and very carefully to develop the company.
Career Objective :
As there is little scope for growth in my present job I would find a more challenging professional position with opportunities.
Good habits :
I can complete any task very carefully.
I wanted to improve my work.
Bad habits :
When I am doing any task I can not leave that work until that work is complete.

[Guest]

CURRICULUM VITAE
RAHUL BHAVSAR
E-mail ID :-rahul_8581 AT yahoo.com

Career Objective :-
Having faith in my knowledge and I intend to build a remarkable career with imagination & innovative outlook, which will help me to explore myself fully and realize my potential. I am willing to work as a key player in challenging and creative environment which can improve my knowledge and I can prove myself a big asset of the company.
Academic Qualification :-
- B.E. Mechanical Engineer with First class (65.66%) from VTU University, Karnataka in 2011
- Project :An Experimental Investigation On Intrinsic Healing Behaviour of Epoxy Adhesive
- Diploma Mechanical Engineer with second class (59%) from Tech.Board Gujarat in 2006
- Project :Diaphragm pump
- Higher Secondary : 58.00%
- Secondary : 86.86%
Strengths :-
Self-confidence, excellent communication skill, Hardworking, awareness for responsibilities, ability to work calmly even under pressure and in harmony with other.

Professional Experience
1. Organization : Harikrushna M/C Tech Pvt. Ltd. Ahmedabad
Designation : Service Engineer. Duration: 2006-2007
Roles and Responsibility : Problem solving and providing technical solution.
Hobbies & Interests
- Learning new concept & Technology, Communicating with People, Reading Books .

Aim :-
- Areas of Interest in Maintenance, Production, Quality control and Service Department.
- To be Successful in Society and work place.

Other :-
- Basic of Computer
- Microsoft Office
- Auto cad (In BBIT. V.V. Nagar )
- Solid edge.

[satyajitmohanty04]

OBJECTIVE
To work in an innovative & competitive organization to be more professional and substantially contribute to the growth of the organization.
WORKING EXPERIENCE
- Working as DIPLOMA ENGINEER in UNIQUE CONSTRUCTION&ENGINEERS, for the period from 01.05.2011 to till date .
EDUCATION
- Diploma in Mechanical Engineering from Swami Vivekananda School of Engg. And Tech Under SCTE&VT, With 73.78% in 2011.
- 10+2 (Science) from H.N.S Mahavidyalaya, under C.H.S.E, With 48% in 2008.
- 10th from BaliaGovt High School under HSC, Orissa with 69% in 2006.

SOFTWARE PROFICIENCY
- Operating Systems : Windows 98, 2000, XP, 2003.
- MS Office : MS Word, MS Excel & MS Power point & Internet.
Satyajit Mohanty
E-mail : mohanty.satyajit84 AT gmail.com
PERSONALITY TRAITS
- Self Motivating.
- Positive attitude Commitment to work.
- Quick Adaptability.
- Good problem solving skills and Flexible nature.
- Team Motivating towards the common Goal.

[Guest]

RESUME
Niloy Bala
Email-niloy.bala2010 AT gmail.com
Career Objective : Looking forward to work with organization that helps me to perform an opportunity and provide a constant environment, where my idea, efforts and contribution lead to self and organization group.
Educational Qualifications :
2004 : Passed Secondary Examination in first class from W.B.B.S.E.
Technical Qualification :
2007-2010 :Passed Three Years Diploma In Automobile Engineering from Govt. Polytechnic Collage.
Professional Experience :
From July 2010 I am working in “GATI MOTORS PVT. LTD.”(TATA AUTHORISED DEALER POINT,CVBU) as a Claim Manager.
Responsibilities :
1)Handling all kind of Claims(warranty,accidental etc.)
Hobbies :
Reading novels and all kinds of automobile based book,Playing badminton