PDMS PIPING DESIGNER : Singapore

[almahask1987]

Responsibilities :
- Designing and detailing on LNG projects, as per applicable specifications.
- Familiar with piping design standards in field of oil and gas
- Piping Engineering Design and 3D modeling by PDMS
- Piping study & Preparation of Piping General Arrangement Drawings.
- Pipe support Layout & Support Sketch Preparation.
- Isometric, Fabrication Isometric Sketch & Drawing preparation.
- Checking of Piping Layouts, Isometrics.
- 3D Modeling Design, Draft & ISO-Draft
- Extraction of Isometric from PDMS by using ISODRAFT

Qualifications :
a) Either Diploma or Bachelor in Engineering
b) Proficient with PDMS- 2D & 3D Modeling
c) Knowledgeable on ISO-DRAFT
d) PDMS expert
e) 8-15 years of experience
f) Strong analytical skills
g) Preferably working currently in Singapore

alma AT haskem.com

[Guest]

SACHIN CHOUDHARI

E-mail : sachin_meher07 AT yahoo.com

Objectives :
Want to be apart of an organization that offers growth potential and learning opportunities.
Experience :-
As a Piping Layout Engineer :- 8 years
Key skills : Piping layout, pipe support specification, MTO, site engineering, FPSO, etc.
Software : PDMS 11.6, Auto Cad, Naviswork, Tribon, Solid Edge -V17, PDS review.
Current CTC :- 10.3 Lacs
Notice period – 1 Month
Work Experience
1) Presently working with PL Engineering Gurgaon (Simon carves India ltd)
A Punj Lloyd company, since April 2008 to till date as a Senior engineer.
Company :KOC/KNPC refinery projects for Petrofac International Ltd. Sharjah.
Designation :Sr. Piping Engineer
Project Name- Installation of gas oil and fuel oil pump station and interconnecting
piping to tank farm and distribution for KNPC/KOC refinery at Kuwait
Job Title : Sr. Layout & support Engineer. Period : Since sept-2010
Project phase : Since starting to till date
Responsibilities-
- Site visit at Kuwait at KNPC/MAA refinery and existing KOC-Zour power station and existing tank form to finalise the pipe routing for offsite piping.
- Coordination with Hyundai engineering for piping interface.
- Development of Plot plan, equipment layout for pump station and its verification at site.
- Preparation of Pipe rack loading data and civil input.
- IDC check, Interdisciplinary co-ordination with other department like civil, electrical for finalizing the job.
- Monitoring PDMS modeling progress and model review in Navis work, drawing approval from KOC-PMC, fully aware with KOC-KNPC working standard making compliance report
- Tie-in verification and feasibility of pipe routing and preparation of tie-in package with tie-in schedule, tie-in sketch and tie in index.
- Involved in critical aspects related to preparation of piping study equipment layout, plot plan, piping GAD, Isometrics, supporting structure.
2) Company :KOC/KNPC refinery projects for Petrofac International Ltd.
Designation : Sr. Piping Engineer
Project Name- Slug catcher, Booster station (process facility) GCs for MAA REFINERY
Job Title : Sr. Layout & support Engineer. Period : 1.6 year
Project phase : Since starting to completion and site activity.
Responsibilities-
- Development of Plot plan, unit plot plan and equipment layout and its verification at site.
- Involved in critical aspects related to preparation of equipment layout, plot plan, piping GAD, Isometrics, supporting structure.
- Drawing approval from KOC-PMC with compliance report, fully aware with KOC-KNPC working standard.
- Site visit at Kuwait at KNPC/MAA refinery and existing Booster station GCs and slug catcher.
- Preparation of tie-in package with tie-in schedule, tie-in sketch and tie in index.
- Standard secondary Support selection, marking on GADs and coordination with stress department.
- Preparation sketches of special support and preparation of load data for civil.
- Preparation of piping support schedule (primary support, standard secondary support, special support and standard foundation) for civil department.
- Preparing Material Take off Basis and Piping group work Instructions.
- Progress monitoring, Work hour estimation, Planning Man power requirement & coordinating interdisciplinary activities of Task force members.
- Coordinating with Project Manager, Piping Supervisor and team members for review and completion of project.
- Interdisciplinary co-ordination with other department like civil, electrical for finalizing the job.
Project Name- Sulphur recovery unit for BINA Refinery IOCL
Job Title : Sr. Layout Engineer. Period : 6 Months
Project phase : Last phase
Responsibilities-
- Equipment modeling and piping modeling of Pump, Heat Exchanger, utility system and column piping, support modeling.
- Extraction of isometrics and resolving of modeling errors in PDMS.
- Interdisciplinary co-ordination with other department like civil, electrical for finalizing the job.
- Resolution of site queries and site engineering requests.
- Co ordination with stress department for necessary stress analysis required for critical lines.
- Clash checking for piping with structures.
- Piping support selection and support modeling for column.
- Checking of Isometric drawings with MTO
- Coordination with process department for PID mark and updating as per piping layout.
- Preparing sketches of special piping support for civil/structure department.

Project Name- Feed work for Polysilicon (process plant for solar panels)
Job Title : Sr. Layout Engineer.(Deposition) Period : 4 Months
Project phase : Since starting
CLIENT SOLMIC Renewable Kazakhstan.
PMC MOTT Macdonald Oman
Responsibilities-
- Development of overall plot plan, unit plot plan.
- Conceptual equipment layout of Tank Farm, Utility block, Deposition reactor, Distillations column and silicon synthesis.
- Piping study for overall plant and design of pipe rack for overall plant and deposition reactor.
- Checking of Plot plan, equipment layout, piping specification and statutory approval drawings.
- Preparation of piping layout for deposition reactor and tank form.
Project Name- 42” Zakum MOL Abu-dhabi (Offshore Platform)
Job Title : Layout Engineer. Period : 1 month
Project phase : Initial biding phase
Responsibilities-
- Site visit at offshore platform Abu dhabi (UAE)
- Tie in verification at Zakum CC Platform (process facility).
- Tie in verification at refinery of Zirku island (process facility).
- Developed tie in philosophy and methodology for minimum shut down.
- Coordination with site person for indentifying tie in location.
- Study of existing layout at offshore platform and feasibility for new piping layout with tie-in to existing piping.
2) Company : Keppel Shipyard Singapore (Offshore-FPSO)
Designation : Piping Engineer
Duration : Since March 2006 to April 2008
Client : Petrobrass Brazil
PMC : Prosafe.
Project Name- FPSO( Polvo-Petrobras), P-53 (Petrobras)
Job Title : Layout Engineer. Period : 2 years
Project phase : Since starting
Responsibilities-
- Involved in critical aspects related to preparation of equipment layout, plot plan, piping GAD, PFD, Isometrics, supporting structure and plant design review on PDS Review.
- Making piping layout from P & ID and General arrangement and hook up drawing with process modules on top side.
- Pipe rack arrangement with interconnection of process module and marine side.
- Making piping supports with structure and detail engineering.
- Handling and distribution of Drawings to the production and coordination with fabrication contractor.
- Checking of Isometric drawings with MTO
- Checking interference of piping with structure and electrical cable tray in PDS preview.
- Preparation of tie-in package with tie-in schedule, tie-in sketch and tie in index.
- Preparation of piping support schedule(primary support, standard secondary support, special support and standard foundation) for civil department
- Support selection and marking on GADs and isometric.
3) Company : Dipesh Engg Pvt. Ltd Mumbai (Unique Chemoplant Tarapur)
Designation : Design Engineer (Piping)
Duration : 4 Yrs ( Since May 2002 to March 2006)
Project Name- Formaldehyde Chemical Company Ltd, Al-Jubail Resin plant (Saudi
Job Title : Layout Engineer. Period : 1.6 years
Project phase : ALL
Project Name- Suketu Chemical Ltd, Tarapur, Thane
Job Title : Design Engineer. Period : 2.3 years
Project phase : ALL
4) Company : Antech Micro technology MUMBAI
Designation : Design Engineer(Equipment design and modeling PLM)
Duration : 4 Yrs ( Since May 2000 to April 2002)
Project :3-D modeling and Automation of equipment drawing (e.g.-Reactors, Blenders, Agitator with shaft, Heat exchanger, Condenser, Pr. Vessels and Storage tanks, etc) Using Solid Edge-V17 a Cad software, for Unique Chemoplant Equipment, Mumbai.
Designation : Design Engineer (customization)
5) Worked as lecturer at Government Polytechnic Arvi (BTE Mumbai) for 1999 – 2000.
ACADEMIC QUALIFICATIONS
- Successfully completed Post Graduate diploma in “Piping engineering” from Suvidya
Institute of Technology, Mumbai.
- B.E. (Mechanical Engineering) from Bapurao Deshmukh College of Engineering &
Technology sevagram, an ‘A’ graded college, affiliated to Nagur University, Maharashtra
in 1999 with 69%.
- Diploma in Mechanical Engineering from Government Polytechnic Arvi, a affiliated to
Bombay Technical Education Board Mumbai, Maharashtra in 1996 with 69.00%.
Extra Curricular Activities
Member of Meher Baba Spiritual center, Meherabad (Ahemadnagar)
Languages known
English, Hindi, Marathi

[Guest]

D.ANNAMALAI
Page 1 of 4
D.ANNAMALAI
- : +91 9444807500 Email:annamalaiii AT gmail.com OBJECTIVE
Over 2+ years of professional experience in piping drafting in Oil & Gas Projects. Experience on-site and at home office assignment as Piping Draughtsman
EDUCATIONAL QUALIFICATION
PROJECT EXPERIENCE
- Automobile air –conditioner (8 H.P.-CAPACITY)
PROFESSIONAL EXPERIENCE
5. PRESENT POSITION : Draftsman.
- Gulf Spic Trading and Contracting Company W.L.L. KUWAIT.
(Design & Engineering Consultant)
Period : May 2009 to May 2011.
Designation : Cad Draftsman
Responsibilities : Preparation of
- Mechanical Drawings (OIL & GAS PIPING)
Software’s Usage : AutoCAD, CAD Overlay 2000i, CADWORX & MICRO
STATION. PROJECT : INCOMMING OF FLARE GAS RECOVERY UNIT.
CLIENT : Kuwait National Petroleum Company. Qualifications Year(s) of study University / Institute Specialization Percentage Diploma in Mechanical Engineering (Refrigeration and Air conditioner) (2005 – 2008)
Govt. Technical Training Center Chennai, T.N
75.8%
I.T.I. (Mechanic Motor vehicle) (1999-2001)
Govt. Industrial Training Institute, Cuddalore. T.N.
85%
X th Class (MAR 1999)
St. Joseph’s High School, Cuddalore. T.N.
State Board
77.4%
RESUME
D.ANNAMALAI
Page 2 of 4
PROJECT RESPONSIBILITES :
- Preparation of Site survey and verification.
- Preparation of P&ID
- Preparation of Plot Plan.
- Preparation of Equipment layout.
- Preparation of piping layout.
- Preparation of Isometric.
- Preparation of Fire Fighting layout.
- Preparation of Drain Layout.
- Preparing Piping and Instrument Diagrams, Schematic sketches.
- Preparation of B.O.M.(Bill Of Material)
PROJECT : REPLACEMENT OF NEW 8 PLATE HEAT EXCHANGER AT GC- 04.
CLIENT : Kuwait Oil Company, (K.O.C)
PROJECT RESPONSIBILITES :
- Preparation of Site survey and verification.
- Preparation of P&ID
- Preparation of Plot Plan.
- Preparation of piping layout.
- Preparation of detail Isometric.
- Preparation of Drain Layout.
- Preparing Piping and Instrument Diagrams, Schematic sketches.
- Preparation of B.O.M.(Bill Of Material)
- Preparation of structural detail drawing
- Preparation of fabrication isometric using CAD WORKS (AUTO GENARATION)
PROJECT : UPDATING OF AS-BUILT FOR GATHERING & BOOSTER SECTION.
36678 - Updating of As-Built Drawings in South Kuwait, East Kuwait, North Kuwait, West Kuwait, Tank Farms & Export Facilities including Mina Al Ahmadi and the Ex-Ministry Crude and Fuel Oil Pipelines located anywhere within State of Kuwait and performing all work which could be reasonably deemed necessary to complete
CLIENT : Kuwait Oil Company, (K.O.C)
PROJECT RESPONSIBILITES :
- Preparation of Isometric. Site survey and site verification.
- Preparation of Equipment Layout.
- Preparation of Area division Layout.
- Preparation of General Arrangement Drawing.
- Preparation of Pipe Support layout & Detail drawings.
- Preparation of Fire Fighting Layout, Drain & Detail drawings.
- Preparation of as built Drawings as per site survey.
4. POSITION : Junior Design Engineer,
- CHILL TECH. ENGINEERING, saidepat, Chennai.
D.ANNAMALAI
Page 3 of 4
(Design & Engineering Consultant)
Period : 2008 to 2009.
Designation : Cad designer.
Responsibilities : Preparation of
- Mechanical Drawings (HVAC)
Software’s Usage : AutoCAD
PROJECT : SHOPPING COMPLEX CHILLER PIPING.(2 MONTHS ONLY)
- Designing for (HVAC) and plumbing for all kind of building works.
- Designing for heat load calculation( using software)
- Designing for duct sizing.
- Co-ordination Drawings for Chiller Piping & Ducting work in site.
- Preparation of B.O.M.(Bill Of Material)
PROJECT : HOSPITAL (6 FLOOR). (2 MONTHS ONLY.)
- Designing for (HVAC) and plumbing for all kind of building works.
- Designing for heat load calculation( using software)
- Designing for duct sizing.
- Preparation of B.O.M.(Bill Of Material)
- Co-ordination Drawings for Piping & Ducting work in site COMPUTER SKILLS
- AUTOCAD
- Ability to handle the HVAC SOFTWARE and also do the design and shop heat load calculation. CARRIER SUMMARY
AFTER FINISHING I.T.I (MECHANIC MOTOR VEHICLE)
3. POSITION : Draftsman.
- T.V.S. MOTOR, Hosur.
Period : 2004 to 2005
Designation : Cad Draftsman.
Responsibilities : Preparation of
- Mechanical Drawings (JIG & FIXTURE)
Software’s Usage : AutoCAD
T.V.S. MOTORS NATURE OF WORK
- Designing for mechanical Jig & Fixture drawings.
D.ANNAMALAI
Page 4 of 4
- Converting Tiff file to AutoCAD file.
- Editing Tiff & AutoCAD file.
2. POSITION : Job assembler and Tester.
- SUNDARM CLAYTON LTD., Chennai.
Period : 2003 to 2004. SUNDARM CLAYTON LTD., NATURE OF WORK
- All kinds of air break valve.
- Testing of all break valves.
1. POSITION : Vehicle Mechanic
- ASHOK LEYLAND LTD., Hosur
Period : 2001 to 2003. ASHOK LEYLAND LTD., NATURE OF WORK
- Air leak testing in air break lines.
- Arresting of oil leakage.
- Adjusting of Clutch, Accelerator & Break ply.

[Guest]

hellow, sir my self rakesh khichi. i m doing piping drafting, auto cad & pdms course after 12th.
so, could u help or give some information to make my carrier in this field. my no- 91-. rkhichi9@gmail.com. sir pls reply

[satish@1]

A.SATISH KUMAR
Email : satish_asku AT yahoo.co.in
OBJECTIVE
To get exposure, experience and a promising career in an innovative organization where my creativity is exposed and to be associated with progressive organizations which can provide me with a dynamic work atmosphere to extract my inherent skills.
Professional Summary
- 3+ Years of Experience as Design Engineer.
- Proficient in modelling, detailing and assembling using CAD tools, PDMS 11.6 and AutoCAD.
- Knowledge on P&ID’s like Lube oil System, Compressor Seal gas Systems.
- Engineering of Piping Layouts.
- Reverse Engineering of Existing Components and 3D models.
- Basic Knowledge on Material Standards, Codes and Specifications.
- Knowledge on Equipment Layouts.
- Adaptability to change, fast learner.
Educational qualification
- B.Tech Mechanical Engineering from JNT University 2007
- Diploma in Mechanical Engineering from SBTE&T in 2002.
Professional Experience :
Project # 1
Project : GJØA SEMI EPCH PROJECT
Client : Statoil Hydro, UK
Organization : Aker Solutions
Worked as a Design Engineer from Mar-2009 to Jan 2011.
Description :
- The platform is semi submersible and the Topsides dry weight is ~19800 tonnes
- The topside dimension is ~ 110 x 85 m
- Platform is located in North sea & app. 360 m water depth
- Piping & Structural Engg of Topsides are in AKPG scope
- Oil export capacity 13.8 kSm3/d
- Gas export capacity 17 MSm3/d
Responsibilities :
- Study of Design Basis and Project Technical documents
- Review of P&ID
- Pipe Routing and Equipment modeling
- Nozzle Orientation of Equipments
- Checking of isometrics with P&ID
- Structural Modeling & ADP(Automated Drawing Production)
Project # 2
Project : Lube-Oil Console Project
Client : IOCL, PANIPAT
Organization : Arya Systems, Hyderabad
Software : PDMS 11.6, AutoCAD 2006
Worked as a Designer from Aug-2008 to Feb 2009.
Responsibilities :
- Foundation and Equipment arrangement (Pumps, Filters, Coolers and Main oil tank)
- Preparation of Piping General Arrangement Drawings
- Preparation of Lube Oil Console Drawings.
- Preparation of Equipment Layout
- Preparation of Bill of Materials
- Knowledge in relevant Standards and Codes.
Project # 3
Project : Water Treatment Plant
Client : HYQUIP, Hyderabad
Organization : Arya Systems, Hyderabad
Software : Auto CAD
Role : 2D Piping Draftsman
Worked as a Designer from Dec-2007 to July 2008.
Description :
This project involves Pipe Routing of compressor area, Scale pit area and WTP area between different Cooling Tanks, Filters, Heat Exchangers and Compressors with their respective pumps.
Responsibilities :
- Preparation of Piping Drawings for Centrifugal Compressor Train.
- Preparation of Piping Bill of Materials.
- Preparation of Piping arrangement for Mechanical Run Test.
- Knowledge in relevant Standards and Codes.
Technical Skill Set :
- AUTOCAD
- PDMS 11.6
Declaration :
I hereby declare that the information provided above is true and correct to the best of my knowledge.
Date : 06/07/11
Place : Hyderabad
(A.SATISH)

[Guest]

DINESH KUMAR.S
Email : dine.s.pkt AT gmail.com
Objective To work in a culture that harbors talent, encourages innovation, promotes growth and where I can prove my technical competence and creative thinking as an individual and as a team member.
Education B.E (mechanical)
Dhanalakshmi Srinivasan College of engineering and Technology, Maamallapuram, Chennai. 64.5% upto 7th sem 2011
H.S.S
Govt boys higher secondry school, pattukkottai. 57% 2007
S.S.L.C
Govt boys higher secondry school,pattukkottai. 70.4% 2005
Technical Expertise Packages :
MS Office, AUTOCAD, Pro/E, ANSYS.
Platform :
Windows XP, windows 7.
Project Work B.E Projects
Title : Experimental Analysis of AL-FE Metal Composite Through Powder Metallurgy Route Cold Forging Method.

Title : Automatic Side Stand Retreating Device For Motor bikeS
Paper Presentation, Seminars & Workshop Attended
- Won THIRD Prize in Business Plan Paper Presentation Competition conducted by SAE Tier-I for presenting a paper on AUTOMATIC SIDE STAND RETREATING DEVICE FOR MOTORBIKES.
- Won THIRD prize in Paper Presentation Competition conducted by Entrepreneurship Development Cell of our college (AUTOMATIC SIDE STAND RETREATING DEVICE FOR MOTORBIKES).
- Won FIRST prize in SCIENCE EXHIBITION held on our college ( WIND RECIPROCATING PUMP)
Field Visit
- Ashok Leyland in Chennai.
- ELGI in Coimbatore.
- BETA in Chennai.
- Orchid chemical factory, Chennai.
Field of Interest - Automobile
- Manufacturing
Achievements - Won prices in atheletics,(inter school level)
- NATIONAL SERVICE SCHEME.
- NCC (SARGENT)
- Won best cadet price in NCC

[Guest]

hi this resume is very nice i like it

[anand_katuri]

Respected sir,
This is ANAND K, I have 8yrs Experience in Oil & Gas(Offshore and Onshore).
Right know I am working in Petrofac ,Chennai, India as a Designer (PDS & PDMS).
I am familiar with PDS ,PDMS , AutoCAD and Micro station.
1 Present location :- Chennai
2. Present CTC :- 6.6PA
3. Expected CTC :- Negotiable
4. Notice period required for joining :- 10-15days
Best Regards
Anand Katuri
anand_katuri AT rediffmail.com
******************************

[Guest]

Mohammed Aftab Alam

E-mail :-aftabnmech AT gmail.com,
aftab_alammm001 AT yahoo.co.in
alishona AT gmail.com

- OBJECTIVE
- To be part of the organization where my skills could be harnessed to upgrade my learning process and simultaneously contribute to the growth of the organization in an efficient manner.
- PROFESSIONAL EXPERIENCES (Total experience around 4.6 years)
Certificate Course in Piping Design Engineering with PDMS in MIT, Pune Batch#58 in 2011
- Familiar with ASME B31.3 used for Process Piping design and
- ASME Sec.VIII, Div-I rules for Construction of Pressure Vessels.
- Flange Class & Gasket Selection for Piping
- Valves and Specification
- Well familiar with “Plot Plan, Equipment Layout, Piping Layout” Piping GA drawings
- Familiar with Isometric drawings, & P&ID
- Piping consideration for Mechanical Static and Rotary Equipments.
- Piping MOC, Piping Specification and Branching Tables.
- Familiar with Pipe Racks (Including Width of Pipe Rack), Sleepers selections and location
- Preparation of “MTO/BOM” from P & ID
- Basic of stress analysis
- Familiar with IBR codes
- Coordinating with Site people.
PDMS 11.6, 12.0 (Plant Design and Management System) Module.
- Equipment Modeling with Primitives and Standard according to vendor prints in PDMS (3D).
- Piping Modeling or Routing from P&ID and Piping studies in PDMS (3D).
- Generate (MTO) from PDMS and checking Clash Report
- Isometric drawings extraction from PDMS
- Interface with other departments.
Mechanical Engineer in Arabian Thermal Aire Industries Co Ltd, Saudi Arabia Jubail from 14th June 2008 to 12th June 2011. (3 Years)
- Familiar with all HVAC equipments and Expert to prepare engineering issuances for all accessories, Ducting ( Rectangular, Spiral, Flexible ), Fire Dampers, Volume Dampers, Louvers, Mesh Screen, Spin Collars, Flanges, Slip & Drive and Sound Attenuators etc.
- Responsible in reviewing all new contracts / Purchase Orders, to ensure full understanding of customer requirements.
- Well experience and Technical knowledge in Centralized Air Conditioning System, reciprocating and screw type compressors, cooling tower, Air Handling Units, Package Units, Fan coil Units, Pumps, Pipings, Blowers etc.
- Expert in Preparation of Tagged drawings for the client and site people.
- Knowledge of Vulcan II Software, in this we can feed all ducting layout with all components like straight duct, elbows, tees, reducers.
- Expert in design, estimation, costing and preparing B.O.Q’s for silencers, Louvers used at inlet and outlet side of AHU’s, FCU’s, Package units etc.
- Expert in use of IAC UK program in calculations and selection for silencers
- Expert to use Lotus Smart Suit-1-2-3, Lotus 1-2-3.Release 5 & 9, Lotus Notes 8 (Basic) for incoming and outgoing emails
- Handled many projects for Residential Villas,Mosque,Malls and Multistoried buildings
- Editing of softcopy drawings in AutoCAD as per client requirement
- Coordinate with the Installation supervisor and site Engineers for erection of all HVAC accessories.
- Preparing Progress report for each project for the Manager weekly and monthly basis.
PROJECT HANDELED
- Saudi Kayan Petrochemical Complex Project -KAMCO, JUBAIL, KSA.
- Saudi Kayan Petrochemical Complex Project -SAMSUNG, JUBAIL, KSA.
- Barwa Commercial Avenue- Mercury Engg,Qatar
- Sidra Medical Research Center (SMRC),Voltas Qatar
- Landmark Etihad Tower Abu Dhabi, Voltas
Assistant Engineer (Production Department) in Ring Forging Pvt Ltd in INDIA from 23 Aug 2007 to 18th April 2008. (1 Year)
- Co-ordinate with the Client and main sub contractor for day to day activities.
- Familiar with Production and Quality Control procedure.
- Well familiar with Route card, Control plan, Time docket, Inspection report
- Familiar with welding and brazing qualification code ASME Sec-IX
- Familiar with practical visual inspection
- Review Inspection and test plans (ITP's), Quality management procedure documents.
- Review of contractor documentation
- QA/QC submission of material approvals to ensure the accuracy of QA/QC projects engineering packages.
- Attend construction progress and QC meeting with contractor and sub contractors
- Reviewing and executing the modification packages and attending the technical meetings.
- Prepare the documents for the QC activities and Test Packages.
- Update all QC activities and prepare the Test Packages Status and Progress reports.
- Weekly Safety and Quality walks at site with contractors to ensure safe and Quality working practices are followed
- PERSONAL ATTRIBUTES/STRENGTH AND SKILLS
- Hardworking, regularity and punctuality are the keys to success.
- Willing to learn new software’s and new technology related to my work
- Quick grasping and retaining new information and procedures.
- Easy understanding and analyzing capability
- Ability to deal with people diplomatically.
- Good Communication skills
- FIELD OF INTREST
- Oil & Gas, Petrochemical,Pipeline,EPC,MEP and Steel Sectors
- TECHNICAL QUALIFICATION
- B E (Mechanical Engineering, 2003-2007 with FCD- Aggregate up to 8th sem 72.27 % ) from College Adichunchanagiri Institute Of Technology,Chikmagalur Karnataka and university Visveswaraiah Technological University,Belgaum
1st Sem(%) 2nd Sem(%) 3rd Sem(%) 4th Sem(%) 5th Sem(%) 6th Sem(%) 7th Sem(%) 8th Sem(%) Average
81.3 71.0 74.22 70.33 67.6 69.33 71.11 73.28 72.27
- ACADAMIC QUALIFICATION
- HSC (10th) from BSL +2 H/S sector 06B, from B.S.E B University in 1998.
- SSC (12th) from BSL +2 H/S sector 12, from B.I.E C University in 2000.
- COMPUTER SKILLS
- Commanding Knowledge of MS OFFICE (Word, Excels, Power Point, Access and Outlook etc).
- Excellently working with all OS (Win XP (98 to 2007), Vista) and network surfing.
- Lotus notes
- Fundamental knowledge of AUTOCAD,
- PDMS.
- Declaration
I Mohammed Aftab Alam clarify that all the information mentioned above is Correct as per as my knowledge.

Date : - 26 March 2012 Signature:-
Place : - Bokaro Steel City,
India

[Guest]

CURRICULUM VITAE
Lankapalli Surya Rao,
Email- lankapallisuri AT gmail.com
=====================================================================
Experience Summary
About 6 years of experience in the field of Piping on various projects in Oil & Gas, Power (Thermal) and Nuclear plants and working as Designer Gr-III in SST India Private Limited, Bangalore, India.
Career Objective
Seeking a position to utilize my skills and abilities in the Esteemed Organization that offers Professional growth while being resourceful, innovative and flexible.
Educational Qualifications
Completed B.Tech in Mechanical Engineering from JNTU College of Engineering Kukatpally, Hyderabad-500072.Awaiting for Results
Full Time Diploma in Mechanical Engineering from S.B.T.E.T, (SMVM Polytechnic-2006 Batch), Tanuku, G.DT-534211.
S.S.C from A.P.S.W.R.Jr.College/School-2003 Batch, Arugolanu, W.G.DT,Andhra Pradesh-53414
About Company
SST India Private Limited is a group of companies in India and U.S.A offering world class Software solutions, Engineering Services and Software related Services to wide spectrum of Industries including Power(fossil&nuclear), Oil&Gas production Engineering (onshore/offshore) Refinery,Petrochemicalfertilizer,Pharmaceutical food processing, paper & Pulp,sugar,water Treatment, Waste Management Steel /Metal, process. Our Software solution cover application ranging from ”Intelligent”P&ID to 3D Plant Design to Design & Analysis of Piping Systems and Support
SST India Private Limited, Hyderabad, is An ISO 9001-2000 Company engaged in the field Design Engineering for Oil & Gas, power Piping design & Analysis.
Website :-www.sstusa.com.
Software Skills :
- Operating Systems : Windows/XP, Windows 7
- Languages : C, (PML basics)
- Designing Packages : Plant Design Management System (PDMS)
Auto CAD
MS-Office
Cadmatic
PDMS Proficiency :
Creation on Project and Managing of Admin Elements (Creation and modification of Teams, User, DB and MDB etc) Planning and Customization of Standard Components and assign to specification, creating UDA’s and Customization of Backing sheets, Report Templates etc and also involved in troubleshooting activities and Designing and extracting outputs like layouts, isometrics and reports and annotation as same as per clients requirement, Having good command all over the tool.
AutoCAD Proficiency :
Working Extensively on AutoCAD to Customization and annotation of P&ID’s, Equipment G.A Drawings, Equipment Layouts, piping layouts and Isometrics templates, Having good Command on all over the tool.
Projects Involved
1. Crude Stabilization Unit, Oman(Valdel India) :- Working as Team lead for a Oil and Gas Project,i.e Planning,administering,Customising and planning of Oil and Gas project as per client requirements and involving other engineering aspects co-coordinating with client and involving in meetings, checking of modeling activites etc.
2. Opal Dahej Petroleum Complex (Dasturco)BHEL Hyderabad :- Working as Team lead for Combined Cycle Thermal Power Plant i.e Planning,administering,Customising and planning of Oil & Gas project as per established procedures by client and involving other engineering aspects co-coordinating with client and involving in meetings, checking of modeling activities etc.
3. Kakrapara Atomic Power Project 3 & 4 units(2x700MWe) :-Worked as Team member i.e. as PDMS administrator and Customized all Primary & Moderator system piping Components and made specification in PDMS as per established procedures by client and Updating the given Equipments, Piping, Civil drawing in 3D Model and involving other engineering aspects co-coordinating with client presenting the modeled activities to the client and getting approval for all extracted drawings from PDMS.
And Other involved Projects are
4. Lanco kondapalli (1x336MW)
5. APGCL-Lakwa1x37.25MW
6. National Aluminum Cooperation Limited (1x19MW)
7. Siddhirganj-1x120MW
8. Lakshmi KRBL and Ugarsugars-(2x40MW)
9. Shatavahana Ispat Limited-1x40MW)
10. Rajasthan sponge water limited
11. Thermax Power Private Limited
For above all projects, developing of 3D-Model for critical lines and non critical lines by using given P&ID, Equipment drawings and civil drawings, extraction of piping layouts, piping Isometrics with BOM, Reports for the same.
Responsibilities Experienced during above Projects involved .
A. Technical and Engineering
- Good knowledge in Oil and Gas, Power and Nuclear Piping along with applicable Standards
- Good knowledge in relevant Codes, Standards and its considerations
- Good knowledge of understanding Piping engineering drawings (inputs) like Equipment, Plot plans and Civil drawings and Piping Specification
- Good Command on Preparation of Erection and Fabrication Drawings like Spool and hook up drawings etc.
- Good knowledge on Piping Material Specifications, Valve Material Specification and its considerations.
- Involved as Presentation Team member at client place and Co-ordination with clients as per established procedures
- Generated layouts for critical lines like steam, Boiler feed water line and non critical lines like Lube oil and cooling Water etc
- Familiar with stress Analysis requirements by using Caepipe/Caeser-II
- Develop, Modify and Annotation of P&ID’s, Equipment G.A Drawings, Equipment Layouts, piping layouts and Isometrics
- Independently can do the pipe routing as per given inputs
B.PDMS and Software
- Solid Knowledge in PDMS all main Modules and its Applications
- Planning, Creation of Project, Project Set Up ,administering the element, and trouble shooting
- Creation of piping components as given standards in Piping Material Specifications and making Specifications by using SPECON
- Customization of Draft and Isodraft and Creation of backing sheets
- Creation of U.D.A’s(User Defined Attributes)
- Provide training to designers for software upgrades and resolving their queries
- Creating drafts , ADP (Automatic drawing production), isometric generation, clash management, reporting, etc.
- Reports Customization as per the requirements
- Member of Interface Team
- Checking modeling activities and removing clashes
- Having basic knowledge on P.M.L(Programmable Macro Language)
PERSONAL STRENGTHS :
- Good interactive and communication skills.
- Self motivated.
- Problem solving attitude using analytical and technical skills.
Place; Bangalore
Dates : 13/04/2012