Anjana HR Consulting Solutions Hyderabad

[muthukalee]

Company Name : Anjana HR Consulting Solutions

Company Location : Hyderabad

Company Profile :
Anjana HR Consulting Solutions is another branch of Anjana Group involved in recruiting the candidates according to the job profile of the requirement.The Essence of Anjana HR Consulting Solutions success is sincerity, personal integrity, humility, courtesy and wisdom. Anjana Placements wishes to secure the good of others by offering incredible values for service. We offer a professional and comprehensive HR service solution for the administration and management of our clients. Furthermore, our services guarantee compliance with ever changing HR needs.

Services Offered :
Anjana HR Consulting Solution establishes trust by working hand in glove with the esteemed clients
The goodwill and confidence created with over a decade of professional services, our data bank is growing rapidly with highly qualified candidates, matching the requirements of various organisations.
Our contacts and relationships help us in locating the right candidate.

Company Address :
Anjana HR Consulting Solutions
H.No.3-6-69/2/1,Opp.Lane to Saigopal Apartments,
Basheer Bagh, Hyderabad - 500 029.

Website : http://anjanagroups.com

How to submit CV / resume : placement@anjanagroups.com

Placement Agencies Hyderabad, Manpower Consultants Hyderabad, Staffing Companies Hyderabad

[Guest-IJT]

Name : MOHAMMED SAMEER KHAJA
Email : md.sameer2722 AT gmail.com
Designation / Skillset : ELECTRICAL DEPT/ELECTRICAL TECHNICIAN/DIPLOMA IN ELECTRICAL ENGINEERING
ELECTRICAL TECHNICIAN

Resume :

- AREA OF INTREST : MAINTENANCE AND PROJECT WORKS

* REFINERY / OIL AND GAS/ PETRO CHEMICAL’S,
FERTILIZER / SULPHUR PLANT.
* POWER PLANTS (GAS / STEAM TURBINE).
* WATER TREATMENT PLANT.
* CEMENT PLANT.
SPECIFIC STRENGTH’S
To think clearly about the requirement and execute the plans by creative ideas, adopt at learning and adoptable to the diversified work environment as a principal in life. I have been hard working, honest and punctual for the betterment of the company and people I am working with. To react immediately at serious matters to think deep and take independent decisions whenever and whatever required and capable to work with a team.
- EDUCATION QUALIFICATION : DIPLOMA ELECTRICAL ENGINEERING
GOVT. POLY TECHNIC COLLEGE,
GULBARGA - KARNATAKA STATE.
- WORK EXPERIENCE)
1. MAY 1995 TO JAN 1998 - WORKED AS AN SR . ELECT. TECH - MAINT/ PROJECTS AT VIJAYAWADA THERMAL POWER STATION, EMPLOYER - M/S KRUPP INDUSTRIES INDIA LTD. COAL HANDLING PLANT (STAGE 3) IBRAHIM PATNAM (ANDHRA PRADESH).
2. MARCH 1998 TO APRIL 1999 - WORKED AS AN ELECTRICAL FORMAN-MAINT/ PROJECTS AT SAUDI ARAMCO (REFINERY), SECECO (SUB STATION), EMPLOYER - M/S JAL INTERNATIONAL COMPANY, ALKHOBAR-KINGDOM OF SAUDI ARABIA.
3. JULY 1999 TO OCT 2001- WORKED AS AN ELECTRICAL FORMAN - MAINT/ PROJECTS EMPLOYER - U.P. STATE BRIDGE CORPORATION, 2ND KRISHNA BRIDGE PROJECT- VIJAYAVADA (ANDHRA PRADESH).
4. NOV 2001 AND STILL WORKING -WORKING AS ELECT. TECH - MAINT/ PROJECTS AT BAPCO - BAHRAIN PETROLEUM COMPANY (B.S.C) closed, EMPLOYER - COMSIP AL A’ALI (W.L.L) BAHRAIN- KINGDOM OF ARABIAN GULF.
LANGUAGES SKILLS : FLUENT IN ENGLISH
(WRITING, READING AND SPEAKING)
DRIVING LICENCE (Bahrain /Gcc ) : LIGHT MOTOR VEHICLE - Dt:04/11/2006 REG: 721119590- BAHRAIN.
1. NATURE OF JOB :
Possessing Knowledge and skill to work for Maintenance/operation/ testing /Project, for Electrical power system equipments and apparatus, reinforcing that with practical insight and recommendations based on sound Engineering principle, “standard specification for Maintenance /Commissioning/Construction Electrical Installation” (Code BRE 48582-0)and fully meet general requirement pertaining to company rules and regulations with quality, electrical safety standard SS/300/SAF/302/SH and OHSA requirement related to maintenance testing and installation as per job description content documents of plant Engineering Trade Test TT/ENG/001 with knowledge of IEEE,IEC,NEC,NEMA,ANSI,NFPA,API etc…. regulation covering electrical equipment , apparatus and installation with familiarity in principle of power, control circuitry having Electrical standard regulation as per Hazardous and non Hazardous location, capable to work efficiently/Independently at Process plant, Control room, Sub-station indoor /outdoor, Work station, Office buildings etc, with good analytical and reasoning skills, ability to work under pressure and team work.
2. DRAWINGS AND CO- ORDINATION :
Possessing knowledge and skills to read and understand Electrical circuitry drawing (power/ control), DCS and PLC Electrical Systems ,literature’s, As Build drawings for any modification to existing system /Installation to be done by taking necessary safe precautions. Co – ordinate to different departments, prepare requisitions to with draw material from stores, mobilization to work site safely. Maintain laison with clients and job approval authorities of various areas specialist’s, Engineering departments, ensure that all Electrical work properly done as per electrical standard, quality procedure safety, Permits….depending upon Classified and non Classified areas.
3. MAITENANCE /TROUBLE SHOOTING /TESTING /OPERATION/ INSTALLATION OF ELECTRICAL SYSTEM :
Possessing knowledge and skills to work out maintenance /project for BUS – Bus Bar (Mcc/Switch Rack /HV Switch board /Ltg panel ),Circuit Breaker of voltage High , Medium ,Low (110V to 4.16 KV ) –Air Magnetic Circuit Breaker either of horizontal draw out type or vertical lift type / Vaccum Circuit Breaker /Moulded Case Circuit Breaker/Oil Circuit Breaker / Insulated Case Circuit Breaker / Power Circuit Breaker used in enclosures / Fused Power Circuit Breaker etc…Motor – Motor disconnecting means, Motor rotation check , Motor Starter (Dol Motor Starter / Motor Circuit protector / HV Motor Starter) , Power Distribution Transformers (Dry type class AA /AVR / CLR), Cathodic Protection Rectifier, Anodes for Calhodic Protection , MOV – Motor Operated Valves (valve actuator), Electric Ignition source – Ignitor transformer, TSW (transfer switch Auto / Manual ) , UPS, Voltage Stabilizer, Battery Battery charger, Switch units (oil fuse switch / ring main fuse switch / isolator switch), Receptacles – welding outlet 480V, small power 220 V,110 V ,24 V etc ….
Possessing knowledge and well versed with Electrical power and control system , trouble shooting power, control circuitry faults by repairing /replacing /maintenance and preparing report (Carried out job activities and root cause analysis for failure), replace of faulty Motor Manager Relay’s, MM display units, MMII, MM3 MM5 and MM6, Contactor - Circuit Breaker / Ltg contactor, Auxiliary contactor , O/L protection Relays , Heater element , No volt release , CT /PT, Grounding resistor Ammeter , Voltmeter , Indication lamps , Start /Stop push Button , Emergency stop push button station , Limit switch , Float switch, Fuse – fuse carrier (power , control) , Lighting Fixtures (100W to 15000W) Explosion proof and Non explosion proof – Sodium, Mercury Vapor, Halogen , Neon ,Fluorescent . Incandescent etc … used at Hazardous and non Hazardous location, fimilarity with DCS and PLC Electrical Systems.
Possessing knowledge and skill to use Electrical test instruments for measuring namely Megger 5 KV ( MTI 520 insulation tester ), Megger (1587 Insulation tester - 50 V to 1000V ), Digital LCR meter (LCR 814) for measuring (Inductance / Capacitance / Dessipation factor ), AVO Meter (Voltage AC/DC, Continuity , Resistance, Polarity), Clamp Meter (tong tester )for amphere load test , Multi Amps unit – to test O/L protection Relays current carrying capacity & Triptime, Auto Earth tester (Megger) check earth loop impedance of plant assets grounding system and measure earth resistance of unit ground rods ….
4. INSTALLATION AND LAYING OF CABLES/CABLE TRAYS/CONDUITS/ GLANDING AND TERMINATION :
Possessing knowledge and skill to work for maintenance / project as per Electrical standard for laying of cables (1.5mm² to 240mm²) PVC/XLPE armoured and unarmoured cable (single and multicore), Integrated gas spacer cable, Lead armoured cable, Piro cable, Micc cable etc Laying of cable though cable trays, underground though trenches, cable ducts, cables directly burried underground by installing cable direction markings , cable through couduit etc… Dressing cable orderly by proper clipping, clamping and tying. Possessing skills to work for installation of cable tray (ladder and punching trays)by installing support for trays / conduit Rigid/ Pvc for Motors ,Lighting fixtures and all type of Electrical assets.
Possessing knowledge and skill to work as per Electrical standard for Glanding and Termination of cable’s (single core and multi cores)of all type – using required size Gland / Lug depending upon type and size of cable – as required for Electrical materials, apparatus and equipment at Hazardous and non Hazardous areas – using Brass Gland , Nickle coated Glands , Stephen Brass Glands , Micc Glands , CGB connector Gland , Copex Gland etc…work on connection of cable core (single and multicore)using Copper Lug, Aluminum Lug. Insulated Lug , Bootlace Lug, ferrul Lug etc… depending upon size of core , type of connection – by doing proper crimping with good finishing by marking’s RYB , ferruls ect…. Possessing skill for repairing of damaged cable upto 120mm² by using cable jointing kit.
5. MAINTENANCE JOB ACTIVITIES AND REQUIRMENTS AT PRE SHUT DOWN, SHUT DOWN AND POST SHUT DOWN :
Possessing knowledge and skill to work as per Electrical standard at per S/D,S/D and post S/D activities and requirements by installations, connection’s of temperory power supply arrangements for Portacabins used as Office’s, Store’s,Lunch rooms ect…..480V Multipoints/Switch Racks, 480/220,110V Multipoints, Generators, Heat treatment machines, Welding Machines of various types, Drinking water coolers, Flood light Fixtures, and any types of Electrical Instruments used for test’s at S/D activities. Laying of Telephone cables, Internet cables and assist Telecom and IT technicians for connections. Possessing skill to work for tank repair major maintenance (storage tank farm) for disconnection and connection of Mixture Motors, arrange power supply for Molex pumps, Dry type distribution transformer’s for Lighting DB, Lighting fixtures depending on type of classification of the tanks, also arrangement of power by means of generators as required – with knowledge of repairing and troubleshooting all faulty Electrical equipments used – get inspected with safe work validity inspected tags( Electrical Maintenance Department).
6. SAFETY AND SAFE WORK RESPONSIBILITY :
Possessing knowledge and skills to prepare work permits depending upon type , location of job prior starting job by taking all necessary approvals and receiving permit from issuing authorities by following all necessary precautions, action including self Personal Protective Equipments covering Electrical Safety Standard for all types of Electrical Sources. Inspect job site, Inspect Locking Device, test Locking effectiveness with permit issuing authorities as specified on safe work clearance card for Electrical Apparatus “ Locked out / Tag out” has been done by procedure – prior starting job as per Electrical Standard.
I have been working for various areas of Refinery units and familiar with all Refinery location of LSFO, VDU, HDU, RGDP, VBU, KRU, KGTU, GTU, Hotonspheres , LPG, NRC, Polymer, GCU, FCCU, Crude units, Plat former , LSDP, HCU , Sulphur Handling facilities, Cooling tower, Cooler box, process control rooms, Substation indoor /outdoor Switch Racks, Marketing terminal, tank’s farm, Warf (T head / iland) etc….always following safe work Order’s, instructions from my superiors.

From,
Mohammad . Sameer Khaja.
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4193540
Date & Time : 31st May 2011 9:43 AM (UTC)
IP Address : 178.17.235.227
Browser Info : Mozilla/5.0 (Windows NT 5.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
Predicted Country ;: --