www.shawgrp.com Shaw Rolta Ltd Mumbai : Instrumentation Design Engineer

[muthukalee]

Shaw Rolta Group Mumbai : Instrumentation Design engineer
shawgrp.com

Company Name : Shaw Rolta Group
Company Location : Mumbai
Designation (of vacancy) : Instrumentation Design engineer
Company E-mail ID : hrQuestions@shawgrp.com
Company Website : www.shawgrp.com

Job Description, Candidate Profile, Company Profile, Company Address :

Shaw Rolta Limited (SWRL), a joint venture company between The Shaw Group Inc.® and Rolta India Limited, offers world-class engineering and design, procurement and construction management services for refinery, petrochemicals, and power projects in India. In addition, SWRL offers engineering and procurement support services for projects worldwide through its affiliates, Shaw Energy and Chemicals Group and Shaw Power Group.

With a heritage of more than a century of experience and a strong local presence, SWRL is ideally positioned to deliver a world of Solutionsâ„¢ to the petrochemical, refinery and power industries.

Duties/Responsibilities :
Exp in engineering & design involving Field Instrumentation, Control Systems & Analyzers. Specifying selection criteria, data sheets, and specifications & performing procurement/ factory acceptance test activities. INTools experience preferred.

- Responsible for execution of projects in engineering design office.
- Site support experience and international experience are a big plus
- Perform other duties as required.

Qualifications :
- Bachelors or Masters degrees in Electronics & Telecommunication or Instrumentation engineering
- Minimum 8+ years dedicated experience in refinery or petrochemical facilities.
-Must be conversant with International Codes and Standards and capable of independently handling Detailed feasibility studies and Engineering Design projects.

[Guest]

plz send me informtion about jobs

[Guest-IJT]

SUDARSHAN G. AMBERKAR
Email : sudarshanamberkar AT gmail.com

Sr. PLC Engineer with over 1 year’s of experience in INSTRUMENTION Department of a STERILIZER (used in pharmaceuticals co.) Manufacturing Firm.
To be valuable asset to an organization that recognizes my work potential and skills to achieve organizational goals and objectives by following its set policies and procedures.
Keen interest in AUTOMATION, Design, MAINTENANCE and other relevant areas in Reputed Engineering Firms.
Core Professional Competencies
- Have a good Knowledge in development of MITSUBISHI PLC
(FXIN-14MR/24 MR,FX 3U)
- Knowledge in development of MITSUBISHI HMI
(E-100/200/300/1012/1032/1043/1061/1063/1101/1151)
- Have a good Knowledge in development of ALLEN BRADELY PLC (MICROLOGIX-1200/1400/1500)
- Knowledge in development of ALLEN BRADELY HMI (PV+400/600,PV400/600COMPACT,PV550/600)
- Software’s handled for MITSUBISHI ( MELSEC MEDOC, GX-DEVELOPER)
- Software’s handled for ALLEN BRADELY ( RSLOGIX-500)
- Have a good Knowledge in development of SCADA( INDUSOFT )
- Also have sufficient knowledge of SIEMENS PLC(S7-200), SCHNEIDER HMI
Professional Synopsis
- INSTRUMENTATION OFFICER – with MachinFabrik Pvt Ltd, Navi Mumbai managing overall ACTIVITY CARRIED OUT ON DIFFERENT PHARMA PLANTS from DEVELOPMENT TO MODIFICATION OF PLC PROGRAMS FOR STERLIZERS.
- Expertise in write the PLC programming for different logics.
- Expertise in MATERIEL HANDELING at department level.
Organisational Experience
Oct ’09 – till date
M/s Machin Fabrik, Navi Mumbai
Machin Fabrik is an ISO 9001 : 2000 certified company engaged in manufacturing of precision stainless steel process equipment for pharmaceutical industry since 1984. The equipment includes all types of Autoclaves along with Distillation Stills. The company has been trusted and reliable partner for best pharmaceutical and lifescience companies like GSK, Novaratis, Cipla, Ranbaxy, Hetero etc.


Academic Credentials
INSTRUMENTATION Engineering (2009) :
- B.E in INSTRUMENTATION Stream, 2009 from Mumbai University, Maharashtra with 69% of final year and 63% aggregate.
- HSC from Mumbai University, Maharashtra with 56%.
- SSC from Mumbai University, Maharastra with 77%.

[Guest]

YOGESH MAHADEV SHINDE
Instrumentation Engineer
Email : yogeshshinde55 AT yahoo.co.in
Objective :
To be a Leading Professional in an organization with challenging assignments that would in turn help to meet the company’s as well as personal goals and objectives by using my technical and Leadership skills.
Experience :
1. Employer : - Thermax India Ltd.
Position : - Instrumentation Project Engineer,
Date : - Aug 2010 to till date.
- JOB PROFILE :-
- Installation & Commissioning of following projects.
1) Guru Govind Singh Refinery, Hindustan Mittal Energy Limited, Bathinda.
Presently Installation & Commissioning of Electrical & Instrumentation Job as per EIL & Thermax standard & specification of Project 1 x Flue Gas Cooler Boiler (Capacity 105.7 TPH), 2 x VGO-HDT Heater (Capacity 11.695 MMKcal/hr & 22.755 MMKcal/hr), 1 x FCC Heater (Capacity 11.08 MMKcal/hr) & 2 x DCU Heater (Capacity 35.86 MMKcal/hr each).
2) Gayatri Power Project(Boiler Automation)-
Commissioning flow transmitter(Rosemount),DP transmitter(Rosemount), Pressure transmitter (Rosemount),MP based PID controller(Tata Honeywell),Indicator totalizer (Manas),Auto Manual Stations(Manas),E/P convertors(Moore),3 Pen Recorder(Yokogawa), Strip charts Recorder (Protek), Draft Gauge (Tiwac), Control Valve (Fluidline), Annunciator (Proton), Boiler Panel,3 Drum Level Control, Deaerator Level & pressure Control, Furnace pressure control, Steam Temperature Control &Pressure Control.
1) P & I diagrams, Instrument engineering data sheets, Cable block diagrams, Junction boxes, Instrument signal diagrams, Hook-ups diagrams, junction box mounting support details, Instrument cable Trench/Tray layouts, Instrument location layouts, Cable schedules, Construction scope of work, Site data collection,
2) Knowledge of Instruments (Transmitters, Gauges, Temp Instrument, Power Cylinder, Control Valves, Switches, Damper Panel etc), Instrument activity (Calibration, Caballing, Impulse piping, Hydro test, Loop checking etc).
3) Knowledge in electrical such as Junction Box & Power Distribution Board, Power & Control Board, Elec. Power Dis. Panel for MOV/SOOTBLOWER & Installation, power & control cable laying glanding & termination, Earthlings System etc.
4) Practical Experience in Installation of Field Instruments such as Control Valves, Motor Operated Valves, Power Cylinder, Temperature element, Temperature Transmitter & Controller, Pressure Transmitter & Controller, Flow Transmitter & Controller, Level Transmitter & Controller, Flow Level, Vibration, Gauges & Controllers, MOV Panel, Soot blower Panel, Damper Panel, & its connection etc.
5) Preparation of documents of QAP for all types of instrumentation & electrical works.
6) Knowledge of Calibration of Instruments such as Pressure Gauge, Pressure Transmitter, Flow Transmitter, Temperature Transmitter & Gauges, Thermocouple, Level Transmitter.
7) Supporting all activities related to Health, Safety & Environment policy of the organization an statutory regulation of the land.
8) Executions of Air line & Impulse line base on hook up drawing and hydro testing based on bill of material and documentation for instrumentation data.
9) Loop Checking of all Field Instruments from DCS side as well from Field side.
10) Erection Supervision, Installation, Guidance and Commissioning of Process control Instrumentation System.
11) Detailed Engineering, Inspection, and Procurement of Instrument, Final Control Element, and Panel etc.
12) Calibration of Instruments.
2. Employer : - Honeywell Automation India. Ltd.
Position : - Instrumentation Site Engineer,
Date : - April2009 to Aug2010.
Installation and commissioning of following projects.
- CUSTADY TRANSFER METERING STATION FOR LPG AND NAPHATA IN ONGC.HAZIRA
- JOB PROFILE :-
1) Read and understand P&ID, verify all the drawings with P&ID, Installation & Commissioning Mass Flow meter (Emerson), Pressure Transmitter, Temperature Transmitter Pressure Gauge, Temperature gauge, Control Valve, OMIN Flow computer, Honeywell Small volume prover (Honewell Enrof).
2)Simulation of Omni flow Computer ,Programming SCADA, Installation & commissioning of system ,panel, execution of project as per drawing, Cable Termination, Loop checking.
3) Loop Checking of all Field Instruments from control Room side as well from Field side.
4) Knowledge of Calibration of Instruments such as Pressure Gauge, Pressure Transmitter, Flow Transmitter, Temperature Transmitter & Gauges, Thermocouple, Level Transmitter.
3. Employer : - Pidilite industries Ltd Mahad.
Position : - Trainee Instrumentation Engineer,
Date : - March2008 to April2009
- JOB PROFILE :-
1) Working on Batch as well as continuous process.
2) Preventive Maintenance and calibration of Field Instrument such as pressure Gauge, Temperature gauge, flow transmitter ,DP transmitter, Level Transmitter Control Valve, Final Control Element,PH Meter.
3) Study P&I Diagrams, Hook up Diagrams, Specification sheets.
4) Auto Tunning of Batch for Temperature Control.
5) Working on FOXBORO DCS Operating System.
I .T. Skills :
Design software : AutoCAD 2007
Operating system : Windows 2003, XP, Windows Vista.
Office Tools : Microsoft Word, Excel.
Programming language : PLC (Ladder Diagram), Functional logic diagram.
Academic Profile :
Bachelor Degree in Instrumentation and Control with First Class from Pune University,
June 2007
Diploma in Instrumentation Engineering with First class from Dr.Babasaheb Ambedkar Technological University, Lonere, Raigad June 2003

[Guest]

RESUME
Name : RAJENDRA SHIVAJI KAMBLE
Seeking Position of : Structural Design Engineer
Email – rajendrakamble2006 AT yahoo.com
Objective :-
Intend to build a career with leading corporate of hi-tech environment with committed and dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging and creative environment.
Experience :-
Gupte & Mody consulting structural Engineers Goregaon Mumbai.
Working from September 2009 till the date
Gupte & Mody offering consultancy services in design of Water / Sewage treatment plant, Industrial building etc.
Working as Structural Design Engineer
Currently working on Project : - 1) Effluent treatment plant units at Paradeep Orissa,
2) 40 MLD Sewage Treatment Plant at Hubli.
Role –Plant unit’s design, detailing, documentation, drawing checking etc.
Unity Infra project Ltd Mumbai
- Worked from June 2005 to Dec. 2006
Name of Project -“Renovation & modification of Airport-IB Mumbai.’’
Role – Existing structure demolition, site clearance, layout using total station, site execution work for RCC & Space frame structure, RCC work BBS etc.
- Worked Dec.2006 to July 2007
Name of Project -“India bulls site at Lower Parel Mumbai.”
Role – Site mobilization, site layout and fixing location of footing using total station ,site execution drawing record & its study etc.
Education Profile :-
- M.E. in passed in first class Structural Engineering from Sardar Patel College of Engg. Mumbai
in March 2011
- B.E. Passed in second class from Walchand College of Engg Sangli in July 2005.
Software Exposure :- Auto cad, STAAD pro.
Curriculum Project :-
M.E. Project Title – Study of Reactive Powder Concrete : A development of modified RPC
The objective of project is to study of Reactive powder Concrete and its modification for Mumbai region. Concrete mix design of M120 with locally available ingredients for onsite casting.
B.E. Project Title – Restoration of dead lake.
The objective of project is to study of dead lake water, restoration design & estimation of work.
Extra Curriculum Activity :-
- Two day workshop on concrete mix design by Ambhuja cement.
- Two day workshop on Advance concrete mix design by Ambhuja cement.
- Two day training on analysis and design of high rise buildings using STAAD Pro by SPCE

[Guest]

RESUME – INSTRUMENTATION DESIGN ENGINEER
ARUN N K
nkarun84 AT gmail.com

Objective
To work in a challenging environment of a firm where I could prove myself and persistently contribute to the growth of the organization. Over 3.6 years of total experience in Petrochemical, for Instrumentation System Design & Detail Engineering work.
Presently working in MMG, SAUDI as an Instrumentation Design Engineer for JGC, SAUDI.
Educational Qualification
- Full time Bachelor Degree BE in Electronics & Instrumentation Engineering with First Class in 2007 From Thiruvalluvar college of Engg (Anna university),Tamilnadu, India.
- Diplamo in Electrical and Electronics Engg with first class in 2003 from Adhiparasakthi polytechnic college ,Tamil nadu
- Course done : Certified for ADVANCED DIPLOMA CONTROL & INSTRUMENTATION MANAGEMENT in chemin C&I pondicherry
- Programming Skills :
- Instrumentation Design Tool’s (INTOOL’s) Intergraph’s Smart Plant Instrumentation (SPI) 7.0
- E CAD
- MS Office 2003,2007
- C,C++

Professional Experience
1.Organization : MMG (SAUDI ARABIA).
MMG (Saudi Arabia), have been in the EPC business in which provides a full range of technical and project management skills, from design through procurement, construction, commissioning and start-up to assist clients in developing and upgrading facilities.
Duration : May 201o – July 2010
Position : Instrumentation Engineer (Design & Detail Engineering)
Project : NCP (National chevron Philips)
Client : Japan gas corporation, (Saudi).
Scope of Work
Engineering, Procurement and Construction Works for Ethylene Derivatives Plant.
- Polyethylene : 350,000 Ton/Year
- Normal Alpha Olefins : 350,000 Ton/Year and Support facilities.
2.ORGANIZATION : CHEMIN CONTROL and INSTRUMENTATION Pvt. Ltd, PONDCHERRY, INDIA.
Duration : Jan 2008 – Apr 2010
Position : Instrumentation Design Engineer
Project : 1) Sulphur Handling Facilities – Bahrain
2) Phosphoric Acid Plant, Litwin ,Italy

Responsibilities :
- Preparation of Instrument index by review the PID with the use of INtools.
- Preparation of cable Schedules & Interconnection diagrams.
- Generating instrument loop diagrams for Conventional and Foundation field bus (FF) using enhanced smart loop in INtools.
- Preparation of Instrument specification sheet (ISS) with the use of specification module and process module in INtools.
- Preparation of Process Hook-Ups and Pneumatic Hook-Ups with the interpretation of INtools
- Performing cable sizing, cable routing & scheduling with INtools & Excel.
- Preparation of Instrument I/O List, overall & detailed ILDs.
- Preparation of Junction box details and Cable tray layout design.
- Co ordinate with the construction/third party agency to make the as built in the project site.
- Selection & Sizing of various Instruments like control valves, flow meters, thermo wells, relief valves etc.
- Vendor drawing review & Coordination with other disciplines.