www.Ananthaainfotech.co.in Anantha Infotech Pvt Ltd Chennai, UK : Electrical Engineer

[muthukalee]

ANANTHA INFOTECH Pvt Ltd chennai : Engineer Electrical Systems

Company Name : ANANTHA INFOTECH Pvt Ltd
Company Location : chennai
Designation (of vacancy) : Engineer Electrical Systems
Company E-mail ID : jobs@ananthainfotech.co.in
Company Website : http://Ananthaainfotech.co.in

Job Description, Candidate Profile, Company Profile, Company Address :

HI
This is Nirmal from Anantha infotech , chennai ......

Position Description :
Location :West midland UK
Duration : 1.6 yrs contract

- This role has the responsibility for the HLDF component / system. As the owner of this customer facing system you will be responsible for : Validation of design for the system including testing systems in several languages (prior knowledge of these languages is not required), validating the customer interface and interface to the MOST vehicle network. Champion the creation and update of Functional Area Descriptions, System Requirement Documents and Software Requirement Specifications for the introduction of all features. Creation and delivery of Design verification plans. Coordinate the resolution of AIMs / e-Trackers / Issues to achieve targetted glidepath to closure. Champion analysis and resolution of electrical PD issues impacting Business performance - screen washout issues. Use of problem solving tools as appropriate e.g. G8d, 6 Panel. This role will also be involved in the future HMI development to maximise commonality between all models using the HLDF2.1 platforms.

Skills Required :
Knowledge of MOST/CAN based infotainment systems - essential. Experience of human interface (HMI) design - essential. Experience of in vehicle control systems - essential. Knowledge of FPDS / GPDS - desirable. Knowledge of PD toolsets (AIMS / WERS / E-tracker) - essential. Capability of working in a pro-active and pressured environment - essential. Knowledge and application of quality and problem solving tools - essential. Ability to interact and communicate at all levels within the business, suppliers and customers- essential.

Skills Preferred : Full UK driving license.

Experience Required :
Proven delivery performance - essential. Capability to work individually or as part of a team - essential. Previous PMST leadership behaviours - desirable.

Regards
Nirmal

Contact us :
Anantha Infotech Private Ltd.,
2nd Floor, Gokul Arcade,
2, Sardar Patel Road,Adyar
Chennai - 600020. India
Office Tel : +91 44 43412626
Fax : +91 44 434122620

Anantha Ltd.
No 1 Olympic Way, Wembley,
London,UK,
HA9 ONP.
Tel : 020 8434 0401 / 0402
Fax : 020 8434 0468

[Guest-IJT]

Name : Shahul Hameed. N
Email : sagacious1985 AT gmail.com
Designation / Skillset : Electrical Testing and Commissioning Engineer
To
The Manager/ HR
Respected Sir
Subject : Application for the post of Electrical Testing and Commissioning Engineer
I would like to express my interest in your company and any challenging available position. I am qualified Electrical and Electronic Engineer and enclosed are my detailed CV describing all my capabilities, qualification, Computer skills, and work experience of 2 years which would be an asset to the organization. I am proficient in handing all responsibilities in my profile and willing to relocate in any country.
I assure you that my fast learning ability, excellent communication and technical skills will be the precious asset of your organization.
If this interests you, please call me on my cell phone : +919840823991 to set up an appointment.
Thank you for considering my resume and this cover letter.
Sincerely,
Shahul Hameed.N

Resume :
OBJECTIVE
Aspiring for a dynamic and challenging career which utilizes my technical & conceptual skills to accelerate my professional growth and strengthen the image of the organization. Willingness to maintain focus on achieving in the field of Testing and Commissioning of power system products, I look forward for an opportunity to display my skills in the field of Commissioning, Design Engineering and Execution of projects related to power systems.
PROFESSIONAL PROFILE
- Electrical Testing and Commissioning Engineer Experience in Substation of GIS and AIS.
- Testing and Commissioning of EHV/HV/MV/LV Electrical Switchgear and Equipments, Operation of Various Electrical Equipments.
- Substantial experience in Development projects.
- Experience in Testing and Commissioning of HT, LT Panels and HV and MV and Substation of AIS and GIS
- Excellent communication, coordination and interpersonal skills
EDUCATIONAL QUALIFICATIONS
Degree : Bachelor of Engineering,
Discipline : Electrical & Electronics (B.E-EEE),
Year of Graduation : 2009
College : AALIM MUHAMMED SALEGH
COLLEGE OF ENGINEERING,
Chennai
University : Anna University
EMPLOYMENT HISTORY
ORGANISATION : INSER HI-TECH ENGINEERING PVT LTD
DESIGNATION : TESTING & COMMISSIONING ENGINEER
PERIOD : JUNE 2009 TO TILL DATE
NATURE OF WORK AND RESPONSIBILITIES
- Testing of Numerical Relay of Line Protection and Transformer Protection like REL 670, REC 670 and RET 670 and P442, P444 and Over current Relays of SPAJ 140C and All types of Electromagnetic Auxiliary Relays
- Testing and commissioning of all Electrical equipments 415 V, 6.6KV, 11KV, 33KV, 110KV, 220KV, 400KV System.
- Inspection of control and relay panel, preparation of Test Report and cable schedule for sub-station, power plant, and process plant.
- Testing and commissioning of control & relay panel for Transformer, Bus Coupler, and Bus-Transfer and Line feeder.
- Testing of CT, PT, CVT, Circuit breaker, switch gear and Power Transformer.
- Knowledge of Transformer protection, Transformer Differential Protection & REF Protection, Bus Bar protection, Motor protection, and synchronizing scheme.
- Primary Injection of CT and CVT, PT Circuit
- Trouble shooting of all Electrical circuits, control and protection circuits
- As Built Scheme drawing submission, test report submission,
- As build cable schedule submission and all site activity to satisfy the customer
- Attending technical discussion with client & consultant and modification according to the customer & system requirement
TESTING EQUIPMENT HANDLED
- ELTEL TAN DELTA & CAPACITANCE MEASUREMENT KIT
- BIDDLE DELTA – 2000 TAN DELTA KIT
- OMICRON RELAY TEST KIT
- DOBLE HIGH VOLTAGE TEST KIT
- DOBLE RELAY TEST KIT
- TRANSFORMER RATIO METER
- HIGH POTENTIAL TEST KIT (AC/DC)
- DYNAMIC CONTACT RESISTANCE TEST KIT (HISAC ULTIMA)
ANNEXURE OF PROJECTS
PROJECTS OF PRE-COMMISSIONING AND COMMISSIONING HANDLED
PROJECT 1
VENUE : 400KV GIS SUBSTATION, RATNAGIRI.
CLIENT : ABB LTD
CUSTONER : M/s JSW ENERGY POWER LTD
SYNOPSIS OF PROJECT :
- Role Testing and Commissioning Engineer
- Responsibility - Indore CT, Bus PT, Breaker and Isolator Testing and Operation Checking
- Control & Relay Panel Scheme Throughing and Protection Operation Checking
- Outdoor Isolator, CT, CVT, Wave trap Testing and Cable throughing and operation checking
- Testing of Auxiliary relays of ABB Make.
- As built Cable Schedule and Scheme Preparing and Submission to customer
- Testing of ACDB and DCDB with Interlock Operation
- 220 V Battery Bank of Two Number and 48 V Battery Bank Commissioning Successfully
- Bus bar Stability and Differential Operation Checking Have done Well
- Tan delta Test have taken for CT, CVT, Bushing of Reactor and Winding
- Contact Resistance Test Have taken for Isolator, Indoor Isolator and Line and Bus bar
- Interlock operation checking and Troubleshooting the problem taken in protection and equipment and solved successfully
PROJECT 2
VENUE : 400/220 KV S/S SONIPAT, HARIYANA.
CLIENT : SHYAMA POWER INDIA LTD
CUSTONER : M/s POWER GRID CORPORATION OF INDIA LTD.
SYNOPSIS OF PROJECT : This Project has contained two incoming line with Two Main Bus having One and Half Breaker Scheme, Two 315MVA Capacity of Auto Transformer and have protection of Line and Bus bar, Differential, Over current/Earth fault Protection
- Role Testing and Commissioning Engineer
- Responsibility - Outdoor CVT, CT, Breaker and Isolator Testing and Operation Checking
- Control & Relay Panel Scheme Throughing and Protection Operation Checking
- Outdoor Isolator, CT, CVT, Wave trap Testing and Cable throughing and operation checking.
- Contact Resistance Test for CT Connector, Isolator and Earth Switch and Wave Trap.
- 250 KVA DG Automation Scheme Through and Commissioning.
- Testing of ELDB, ACDB, DCDB and MLDB with Interlock Operation have done successfully
- Testing of 11KV/415V Transformer Test have Completed Successfully and Commissioning well
- Testing of Areva Make Auxiliary Relays and Numerical Relays of Distance Relay, Bay Control unit Relay and Over Current
- As built Cable Schedule and Scheme Preparing and Submission to customer
- Interlock operation checking and Troubleshooting the problem taken in protection and equipment solved successfully
- Tan Delta Test for CT, CVT, LA have done successfully
- Bus bar Stability and Protection Operation done Successfully
- Primary Injection Test of CT & CVTs have done successfully-
- Achievements - Thorough knowledge in Projects, Field Engineering, Trouble shooting, Operations of Electrical equipments.
- Worked with team gathering experience of Commissioning of Two Line Bay to Main Bus 1
PROJECT 3
VENUE : 220 KV S/S BISHNUPUR, WEST BENGAL.
CLIENT : AREVA T&D INDIA LTD
CUSTONER : M/s POWER GRID CORPORATION OF INDIA LTD.
SYNOPSIS OF PROJECT: This Project has contained two incoming line which was retrofit to existing system of bus transfer Bay and have protection of Line and Bus bar, Differential, Over current/Earth fault Protection
- Role Testing and Commissioning Engineer
- Responsibility
- Involved in scheme throughing and as built preparation
- Preparing test report format and cable schedule preparation, as built Preparation
- Involved in Testing of CT, CVT, Isolator and Breaker
- Testing of Numerical Relays of Areva Make P442.
- Over current/ Earth Fault and Auxiliary Relay Testing
- Resolving the testing issue/problems within the time
- Special testing of Tan Delta for CT and CVT
- Relay and Control Panel Operation Checking
- Protection Operation Throughed with customer
- Highlights - Isolator interlock checking and modification has done successfully with customer satisfactions.
- Voltage selection relay modification has done for Metering and Line and Bus Selection
- Primary Injection of CT and CVT circuit have done successfully
- Achievements - Thorough knowledge in Projects, Field Engineering, Trouble shooting, Maintenance & Operations of Electrical equipments.
- Worked with team gathering experience of Commissioning of Two Line Bay
PROJECT 4
VENUE : 132/33 KV GIS SUBSTATION, JHOTWARA, JAIPUR.
CLIENT : ABB LTD
CUSTONER : M/s RRVPNL
SYNOPSIS OF PROJECT: This Project has contained two incoming Line of 132 KV and 50 MVA Capacity of Two Transformer and Two Incomer with Seven Outgoing Feeder and Bus Coupler and have protection of Line and Bus bar, Differential, Over current/Earth fault Protection, Transformer Protection.
- Role Testing and Commissioning Engineer
- Responsibility - Indore CT, Bus PT, Breaker and Isolator Testing and Operation Checking
- Control & Relay Panel Scheme Throughing and Protection Operation Checking
- Outdoor Isolator, CT, CVT, Wave trap Testing and Cable throughing and operation checking
- Testing of ABB Make Auxiliary Relays and Numerical Relay of Distance Protection, Differential Protection and REF Protection and Over current and Earth Fault Relays
- As built Cable Schedule and Scheme Preparing and Submission to customer
- Interlock operation checking and Troubleshooting the problem in protection and equipment
- Transformer Operation Checking and Throughing Protection Operation
- Testing of 50 MVA Transformer and Scheme through Has Successfully done.
- Transformer Testing Of HV and LV side and RTCC Operation Throughed to Transformer
- Contact Resistance Test have taken for Indoor Bus bar of GIS and Isolator and Earth Switch
- Hipot Test for 132 KV GIS Bus bar with Line and Transformer Bay have tested successfully cooperated with GIS Engineer of ABB
- HiPot Testing for Cable and 33KV GIS and 132 KV GIS
- Primary Injection of CT and CVT circuit have done successfully
- Bus bar stability and Transformer Stability have done Successfully
- Achievements - Thorough knowledge in Projects, Field Engineering, Trouble shooting, Operations of Electrical equipments of 132/33 KV GIS Substation.
- Interlock Modification have done successfully.
PROJECT 5
VENUE : 132/11 KV SUBSTATION, SHAJHAHANPUR, UTTAR PRADESH.
CLIENT : ABB LTD
CUSTONER : M/s KRIBHCO SHYAM FERTILIZER LTD
SYNOPSIS OF PROJECT: This Project has contained outgoing Line of 132 KV and 35 MVA Capacity of Transformer and 11KV incomer which have the protection of Line and Differential,
Over current/Earth fault Protection, Transformer Protection.
- Role Testing and Commissioning Engineer
- Responsibility - CT, Breaker and Isolator Testing and Operation Checking
- Control & Relay Panel Scheme Throughing and Protection Operation Checking
- Outdoor Isolator, CT, CVT, Wave trap Testing and Cable throughing and operation checking
- Testing of Auxiliary Relays and Fuse Failure Relay and Under Voltage Relays
- Testing of Over Current Relays of ABB Make SPAJ 140 C of Two Number Tested with IDMT and DMT Characteristics Successfully
- As built Cable Schedule and Scheme Preparing and Submission to customer
- Interlock operation checking and Troubleshooting the problem in protection and equipment
- Transformer Operation Checking and Throughing Protection Operation to Relay Panel
- Tan Delta Test have taken for Transformer Bushing and Transformer Winding
- Transformer Testing Of HV and LV side and RTCC Operation Throughed to Transformer
- 11 KV HT Panel Equipment of CT, PT and Breaker Testing Completed Successfully and Commissioning
- HiPot Testing for Cable and 11 KV Bus bar have completed for System Voltage of 11KV
PROJECT 6
VENUE : 400 KV SUBSTATIONS, PURNEA, BIHAR.
CLIENT : SIEMENS LTD
CUSTONER : M/s POWER GRID OF INDIA LTD
SYNOPSIS OF PROJECT: This Project has contained Incoming Line of 400 KV and 63 MVAR Capacity of Reactor and has the protection of Reactor Differential and REF,
- Role Testing and Commissioning Engineer
- Responsibility
- Turret CT, Breaker and Isolator Testing and Operation Checking
- Control & Relay Panel Scheme Throughing and Protection Operation Checking
- Outdoor Isolator, CVT, Wave trap Testing and Cable throughing and operation checking
- Tan Delta Testing For Reactor Bushing and Winding, CVT have taken Successfully
- As built Cable Schedule and Scheme Preparing and Submission to customer
- Interlock operation checking and Troubleshooting the problem in protection and equipment
- Voltage Selection Modification Have taken and Completed Successfully
- Contact Resistance Test for Isolator and Earth Switch Have Completed Successfully
- Reactor Trouble Operation Checking and Throughing Protection Operation

SOFT SKILLS
- Excellent Communication & strong Interpersonal abilities
- Personal accountability
- An excellent team player with good communication skills and has ability to work in a team and individual environment.
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4163263
Date & Time : 23rd May 2011 8:30 AM (UTC)
IP Address : 119.82.77.132
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; InfoPath.2)
Predicted Country : India

[Guest]

VIJAYAGANTH.E

Email : vijayaganth986 AT gmail.com


Career Objective :
To pursue a professional career in an organization wherein I can constantly grow within the company, acquire specific skills at each level and give my best efforts to work for overall stability and prosperity of the company.
Professional Experience :
Designing experience : 4 years
Software Proficiency :
- Electrical AutoCAD
- Pisoft (panel integration software)

1.) Current Work Experience : From October 2010 to Till date.
Working as Assistant Engineer in Engineering - Sub-Station Protection & Control in AREVA T&D India Ltd., Chennai.
Summary
- Handled the projects from 11kv upto 400kV level
- Transformer, Feeder, & Busbar Protection.
- Single Bus, Double Bus systems & One-half Breaker arrangements.
Job responsibilities :
- Preparation of General Arrangement drawings.
- Preparation of Bill of Materials.
- Preparation of Schematic Drawings.
- Primary Equipment co-ordination (Circuit Breaker, Isolator) with the schematic Drawings.
- Preparation of manufacturing documents like Panel Cutouts, Wiring Tables, TB list, Ferrule Report, Labels.
2.) Previous Work Experience : From JULY 2007 TO OCT 2010
Worked as Design Engineer in Engineering - Sub-Station Protection & Control in
Enpro Industrial Automation pvt ltd, Chennai.

Summary
- Handled the projects upto 132kV level
- Generator, Transformer, Feeder Protection & Synchronizing Panels.
- Some of the Key Customers are AREVA, SIEMENS, ABB, GREENSOL, APT, GMR, TDPS and ARVEE.
Job responsibilities :
- General Arrangement drawing preparation
- Designing Schematic Drawings
- Designing panel cut outs.
- Producing Bill of Material.
- Creating production documents – Wiring Table, Cable list, TB list, Ferrule Report, Label List, Wiring and Equipment Wise Schedules
- Revising drawings against comments
- Co ordination With breaker ,isolator & earth switch
- Preparing as-Built Drawing with Site Markup
Academic profile :
- DIPLOMA (ELECTRICAL & ELECTRONICS) Jaya Polytechnic college, Thiruninravur.
.
- Year of completion --- April 2007
- Percentage Marks Obtained --- 90 %
Declaration :
I hereby promise and do confirm that the information given above is true to the best of my knowledge And belief.
Place : (VIJAYAGANTH.E)
Date :