TRANSFORMER TESTING ENGINEER : Resume CV

[umeshrimtian]

UMESH SAWHNEY
umeshrimtian AT yahoo.com, ekta_umesh AT yahoo.com

Executive Summary : 1 Year & 7 Months Experience
Job Objective : Asst. Project Engineer

Total Years of Experience : 1 Year 7 Months
Current Industry : Power Plant (Bio-gas and Bio Mass Power Plant)
Current Location : Binjon Project Site, Dist. Hoshiarpur

Professional Experience (9 Months) :
Designation : Asst. Project Engineer
Organization : Green Planet Energy Private Limited.
Location : Binjon Project Site (Bio Mass based Power Project) Dist. Hoshiarpur
Period : May 2009 to Till Date Present Assignment

Working as Asst. Project Engineer in Green Planet Energy Private Limited, the bio mass & bio gas power project construction and installation of equipments is in progress at Binjon Project, Dist. Hoshiarpur.

Professional Experience (10 Months) :
Designation : Testing Engineer (Power & Distribution Transformers)
Organization : EKTA TRANSFORMER
Location : Saharanpur (U.P)
Period : July 2009 to April 2010
Job Profiles:
Worked as Testing Engineer in EKTA TRANSFORMER, this has been manufacturing and repairing of Distribution Transformer at Saharanpur. Assignment Quality checking. Managing Production Of Transformers Testing of 3 Phase transformer Double Voltage Double Frequency Test. High Voltage Test. Low Voltage Test. No Load Test. Full Load Test. Insulation Resistance Test. Transformer Oil Testing. Transformer Turn Ration Test.

Academic Detail :
- Bachelor of Electrical Engineering (2005-2009) with 67%. “RIMT Institute of Engineering College ” Affiliated from Punjab Technical University, Jalandhar.
- Diploma in Electrical Engineering (2003 to 2006) with 64 % Adesh Polytechnic, Muktsar Affiliated from Punjab State Board of Technical Education and Industrial Training, Chandigarh.
- Matriculation K.V. No2 DMW Patiala Affiliated from C.B.S.E.

Training Periods :
1. Four months Industrial Training at Diesel Loco Modernisation Works (DMW), Patiala during 01/09/2008 to 31/12/2008
2. Two Month Industrial Training at Center Of Nahar Industrial Enterprises Ltd. (Spinning unit 2), Lalru Distt. Mohali during 01/07/08 to 30/08/08.
3. One and Half Month Industrial Training at Center Of Transformer Repair Workshop, Patiala during 22/06/07 to 06/08/07.
4. 15 Days Industrial Training at Center Of Guru Nanak Dev Thermal Plant, Bathinda during 03/01/06 to 17/01/06
5. 15 Days Industrial Training at Diesel Loco Modernisation Works (DMW), Patiala during 04/01/05 to 18/01/05

Computer Application’s Exposure :
Computer Application MS Office 2003. Desktop
OS Windows 98/XP

Co-Curricular Activities :
1. Participated in N.S.S.
2. Participated in Volley Ball & Kho-Kho competition in State level & won 2nd Prize in both.
3. Participated in Scout and Guide in North Zone & won Rajya Puraskar Prize.

[Guest]

THOMAS JOHN
Email : thomasjohn5tkk AT gmail.com

Objective :-
To be the part of a well-reputed organization, where my best abilities can be explored to achieve the organizational goal along with the height of my career.

Strength :-
10 years of experience in the field of Electrical Engineering as T&C Engineer (7 years in UAE & presently working in KSA) including Installation and Testing of HV cables up to 132 kV, Cable schedule preparation, Primary side Testing of GIS up to 380kV, switchgear unit up to 13.8kV. Testing and commissioning of Power Transformer up to 90 MVA. Conversant in using various types of primary & secondary injection test kits in site.
Control and metering, Synchronizing and interlocking schemes ,Interface with Primary equipments, cable schedules etc ,Co ordinate with site team on commissioning of equipment or to respond to technical queries, corrections etc as applicable Directly responsible for maintaining and updating the documentation for respective projects as per quality process.

Project Summary :-
- SWCC Ras Al Khair – Riyadh Water Transmission System
- SEC Extension of Al Qurayat Power Project for Generation – EPC Project
- RC (SEC) for Royal Commission Jubal & Yanbu.
- DWC (DCA) fuel farm, Jebel Ali International Airport, Dubai UAE.
- DEWA, (DCA) 132/11 kV GIS Jebel Ali. International Airport CUC, Cargo.
- DCA, Dubai International Airport EK Operations Center Tunnel.
- DEWA, (FISIA), Jebel Ali Power and Desalination Station ‘L’ Phase 2.
- FEWA, 132/33 kV GIS Gurfa-ah, Fujairah.
- ADNOC, Buhasa & Bab 220/ 33 kV Grid station.
- ADWEA, 7 x 33/11kV S/S in the eastern region of Abu Dhabi and 33 KV Cable interconnection between substations.
- DUBAL, Reconfiguration of Transformer T6 Contract Package. MV/LV Electrical Installation Works & Installation of Rectifier Transformer for PL6B.
- DUBAL , GTX Co generation power plant

Hand on experience :-
- 380kV GIS ( Alstom )
- 115kV GIS (Hyundai) & Control and relay panel (ABB).
- 13.8kV,11kV & 3.3 kV Switchgear (Schneider, Toshiba,Tamco, ABB, Siemens)..
- LV Switch gears (Danway, AGS, ABB and Siemens).
- 132/33kV & 115/13.8kV Power Transformers (Areva & Hyundai).
- 33/11 kV Power Transformer 25 MVA (ABB, Alstom).
- 11kV Capacitor bank (Nokian Capacitors).
- High voltage & Sheath test for 132kV ,115 kV, 33KV Cable (Riyadh cables, Oman cables LG, Tainan, Coralloid & Ducab).
- High voltage test for 13.8 kV / 11KV Cable (Oman cables, Ducab).

Battery Chargers, UPS commissioning asst : (Chloride).
- Preparation and Modification of Cable Schedule for 33/11 kV SWGR (ABB with ETA)

Overseas Gulf Experience :-
1. SSEM – Saudi Services for Electro Mechanical works Co. Ltd., Riyadh, KSA from December 2010 to till date.
Presently working as T&C Engineer in Power supply to Ras Al Khair – Riyadh Water Transmission System in 380kV/13.8kV Substations (2 Nos) for Pumping station 2 &3 (EPC contract with SSEM company for the Project of Saline Water Conversion Corporation ,K.S.A)
2. M/s Middle East Control Services, Dubai, UAE from Nov 2008 to Jan 2010. Worked as an Electrical Engineer in Fuel Farm, JebalAli International Airport Project for D.C.A. Installation , testing and commissioning for 11kV & 3.3kV SWGR and Power tranformersDesign works for cable schedule & Cable pulling schedule,Work allocation,progress reporting,work planning etc. Invoicing and claims settlements.
3. M/s REC- Relays engineering consultancy, Dubai, UAE from April 2008 to Sep 2008. Worked as Switchgear Testing and Commissioning Engineer for Dubai Civil Aviation. Project handled for 132/11 kV GIS in Jebel Ali. International airport CUC, Cargo. All Switchgear testing and commissioning activities up to High voltage Testing , Cable High voltage Testing & Transformer Testing.
4 Danway Electrical & Mechanical L.L.C, Dubai, from Oct 2006 to April 2008 Worked as Testing Engineer in various projects.
The testing and commissioning activities for sub stations and Desalination plants, under the clients FEWA , DEWA ,DCA ,DUBAL, in UAE
5 M/s Hyundai Engineering & Constructions Co Ltd., Abu Dhabi, UAE
From June 2003 to May 2006. Worked as Asst. Electrical Engineer in various Project
i. ADNOC, Buhasa & Bab 220/ 33 kV Grid station electrical lighting & Control cable laying works, earth test for substation works, erection of transformers.
ii. ADWEA 7 x 33/11kV S/S in the eastern region of Abu Dhabi and 33 kV cable

Educational qualification :
Diploma in Electrical Engineering First Class with distinction from Govt : Polytechnic, Kottayam, Kerala. Passed in 2001 (State Board of Technical Education, Kerala)

THOMAS JOHN