Civil, Mechanical Design Engineer Mumbai Bangalore : www.fichtner.in Consulting Engineers India Pvt Ltd

[muthukalee]

fichtner.in

Engineering Positions

Project Managers, Lead Engineers and Design Engineers – Chennai, Mumbai and Bangalore

For the various Power Projects handled across the country and abroad - Engineers with exposure to Power and Process industries from the core discipline ( Civil / Mechanical / C & I / Electrical).

The candidate should be familiar with Basic & Detailed engineering calculations in Power plants from their respective disciplines, which will cover specifications, preparation of feasibility / Project report, vendor drawing review, inter-disciplinary co-ordination, interface engineering etc. The job specifications will vary in accordance with the experience and position of the candidates.

Qualification :
Graduate / Post Graduates from the respective discipline (Civil / Mechanical / C&I / Electrical) hailing from reputed university

Experience & Skills required :
Candidates with 5 – 15 years of experience in the respective disciplines having exposure to engineering activities in large Power Projects. Should possess the competence to transform their skills to performance and deliver the qualitative output within the defined timelines.

About us :
FICHTNER India's main engineering office in Chennai and the engineering branch offices strategically located at Mumbai and Bangalore ensure proximity to industrial markets and efficient service to various clients.Our International Projects Divisions established as independent units at Chennai and Bangalore handle international projects.Engineers in FICHTNER India have experience in all aspects of power projects covering from concept to commissioning, including power equipment manufacture. This varied expertise has given the cutting edge in finding innovative solutions to the demanding tasks in project development. These specialists have handled diverse projects across the country and worldwide with diverse boundary conditions.

Contact us :
FICHTNER Consulting Engineers (India) Private Ltd.,
64, Eldams Road,
Chennai - 600 018,
Tamil Nadu, India.
Phone : +91 44 2435 9158
Fax : +91 44 2434 4579
Email : rec_hrd@chn.fichtner.co.in
http://fichtner.in

[Guest-IJT]

COVERING LETTER
Soma Sekhar Kunapareddy
Mobile : +91-,+91-
Mail : somasekhar_kunapareddy AT yahoo.in
Curent Location :Vuyyuru
Date :
Dear sir/mam,
I am looking for a position of Electrical Engineer in your company. Please Find attached my resume here with, including details of projects handled by me and skill set I’ve so far acquired.
Please consider me for a suitable position in your company.

Thanks & Regards,
Soma Sekhar

Soma Sekhar Kunapareddy
Email : somasekhar_kunapareddy AT yahoo.in

PROFESSIONAL OBJECTIVE
Exploring opportunities to apply extensive experience in plant/facility operations, maintenance, automation, energy management and electrical systems in a challenging career environment where strong communication, project management, troubleshooting and performance optimization skills can be effectively utilized.
EDUCATIONAL QUALIFICATION
2006-10 Bachelor’s in Engineering from A.S.R.C.E, Affiliated to J.N.T.U, Kakinada with 72%.
2004-06 Intermediate from P.R.S.M National Jr College, Board of Intermediate Education(A.P)
With 89.6%

2003-04 Schooling from Vuyyuru Public School, Board of Secondary Education(A.P) with
80.3%

SKILL SETS
- Markup Languages : C , C ++
- Operating System : Windows 98/XP
- Flash-Specific : Mat lab
PROJECTS
1) Project Title : Wireless Music Transmission And Reception Through IR
Communication
Description : Based on an action theme, Using the Infra Red Communication Music is transmitted from one unit and received at another unit situated at distance 175mm nearer to transmitter and total circuit involves with connections of Transistors, LED’s and Resistors etc.,
2) Project Title : Maintenance of Transformer

Description : Based on an action theme, the transformer lets you check your target-grabbing skills. Its CT-PT ratio should be on pre defined value. Oiling of different parts should be on definite time. Cooling of transformer should be proper according to environment.

3) Project : Application Of D-STATCOM to meticate Voltage Sag due to DOL Starter of Three-Phase Induction Motor
Description : The project involves “MODELING AND SIMULATION OF D-STATCOM Devices Using MATLAB/SIMULINK” deals with matlab/simulink based design & testing of above system operating under weak AC system.
This scheme has the advantage of wide range of power control by improving the Quality of power, reducing the voltage Drops in lines that is metication of Sags and ability to recover from the fault condition.The modeled system takes the power input from the user and controls are produced accordingly.
Activities :
- Had an overall exposure to Nagarjuna Sagar Project, Vijayawada Railway Electrical
Loco Shed and VTPS Thermal plant Vijayawada.
- Active participant in social awareness programme held by LION’S CLUB.
Strengths :

- Good time management.
- Positive thinking.
- Zeal to learn new concepts and techniques.
- Good analytical and communication skills.
- Strong work commitment, dedication, determination.

[Guest]

VIJAYAN.L
Email :
vijayannkl6 AT gmail.com

RESUME
Objective :
To pursue a highly challenging and creative career, where I can apply my existing knowledge and creativity, acquire new skills and contribute effectively to the growth of the organization.
Academic chronicle :
- Pursuing M.E. Structural Engineering at Institute of Road and Transport Technology scored 82.45% up to 3rd sem during the year 2009-2011.
- B.E. Civil Engineering at Sona College of Technology scored 71.12% during the year 2005-2008.
- Diploma in civil Engineering at Muthayammal polytechnic college, Rasipuram with an aggregate of 81.17% during the year 2003-2005.
- Hr.Sec at Mahabharathy higher secondary school, Namakkal with 58% during the year 2002-2003.
working Experience :
- Designation : Site Engineer
- Experience : 1 year[JUNE2008-JULY2009]
- Nature of Project : Residential Building
- Company : PSK Engineering and Construction
PART TIME WORK
- Company : CADD CENTRE
- Designation : CADD instructor
- Experience : 1Year [March2010-APRIL2011]
Academic Achievements :
- Received Excellent Academic Performance award during the year 2007 at Sona College of Technology, Salem.
- Received 1st prize in technical quiz in national level student level technical symposium aclette-08 held at K.S.R College of engineering ,Triuchengode
Extra curricula activities
- Participated in international conference on “Disaster management and Mitigation” held at P.S.N.A college of engineering and technology, Dindigul.
- Participated in the two day workshop on “Recent Advances In Codified Method Of Steel Design [LSM :IS 800-2007]” at K.S.R.College of Technology, Tiruchengode.
- Presented paper on “Structural Behavior of Beam Column Joint with Hybrid Fibre” in national conference on ETCE’11 held at K.S.R College Of Technology, Tiruchengode, Namakkal.
- Presented paper on “Structural Behavior of Beam Column Joint with Hybrid Fibre” in national conference on OPTEST ’11 held at Bannari Amman Institute of Technology, Sathyamangalam.
Area of Interest :
- Structural Analysis
- R.C design
Software skills :
- AutoCAD
- STAAD Pro
- ArchiCAD
- Revit Architecture
Project chronicle :
PG Level :
- Structural behavior of interior beam column joint with hybrid fiber
UG Level :
- Seismic behavior of Beam Column joint
- Design of intersection Highway
Diploma :
- Design of R.C Framed structure
My strength :
- Confidence is the key to my success.
- I am a hard worker and I will do my work with dedication and enthusiastically.
- Good Team Player and can easily fit into any team.
Extra Curricular Activities :
- Organizer in the national level technical symposium CARVE ’07 in civil department at Sona College of Technology.
- An active member of NSS during the 2005-08.