www.ultratechcement.com Aditya Birla UltraTech Cement Ltd Tadipatri : Mechanical Engineer

[muthukalee]

ultratechcement.com
Engineer - Mechanical (Projects)

Job ID : 17760
Location : Tadipatri
Full/Part Time : Full-Time
Regular/Temporary : Regular

Introduction :
The Cement Business of the Aditya Birla Group operates as UltraTech Cement Limited

We are today the 11th largest cement producer globally, the 7th largest in India. We have a total capacity of 42 mn tonnes comprising of 11integrated plants, 11 grinding units and 3 bulk terminals spread across the country.

We are the leader in key consumer markets and have a strong brand presence across the country under the UltraTech Cement Brand name.

APCW's Manpower Strength as on date is 625 (Management, Staff and permanent workmen).

Job Title : Engineer - Projects (FLE Position)

Job Location : Bhogasamudram(Village) Tadipatri(Mandal), Anantapur District, A.P.
Nearest Airports are Bangalore (230 kms.) and Hyderabad (350 kms)
Nearrest Railway Stations are Tadipatri (20 kms.) and Gooty (55 kms) on Chennai-Mumbai main line.

Experience : Graduate Engineer with 3 years or Diploma Engineer with 5 years of releavant experience in Projects Department of Cement industry.

Qualifications : Mechanical Diploma Engineer or Gradudate Engineer

Responsibilities : Ensure Erection & commissioning activities of Mechanical related jobs within the scheduled time by providing relevant technical inputs and by devising work simplification methods while taking care of Safety aspects.

Contact us :
"B" Wing, 2nd floor
Ahura Centre
Mahakali Caves Road
Andheri (East)
Mumbai 400 093
India
Email : sharesutcl@adityabirla.com
Website : www.ultratechcement.com

[Guest]

CURRICULUM VITAE
Y. SUDARSHAN REDDY
E-Mail : ysudarshanreddy.458 AT gmail.com

Career Objective :
To be associated with a progressive organization that gives scope to apply my knowledge and skills, and to be a part of a team that dynamically works towards the growth of the Organization.

Educational Qualification :
Qualification University Year of Passing Percentage
B.Tech. ( Electronics &Communication Engineering) J.N.T.University, Hyderabad May 2011 65 %
Intermediate Board of Intermediate Education, A P March -2007 82.2%
S.S.C Board of Secondary Education, A P. March-2005 83.3%
Strengths :
- Adaptable to different kinds of environment.
- Believe in hard work and Optimistic.
- Self confidence, self motivate.
Extra Curricular Activities :
- Active volunteer for “Annual day celebrations” conducted in our college.
- One of the organizers of “LAKSHYA” programme conducted in our hostel
Achievements :
- Received “best player award ” in cricket at college level.
- Our team won twice in“kabaddi” championship held at college level.
Academic Project Details :
Project Title : WIRELESS HANDHELD ORDERING TERMINAL BASED ON EMBADED AT89C52 Role : Team Leader
Team Size : 3 Members
Brief Overview of Project :
Wireless handheld ordering terminal applied to small and middle hotels.The development of the wireless handheld terminal based on the software-hardware platform of AT89C52 and Zigbee short-range radio communication technology.
This system can help catering enterprises reduce the cost of human resources,improve work efficiency. Nowadays, most of the prelavent designs concering wireless ordering system are divided into two schemes : one is for large-scale hotels uses PDA and wireless adapter card. This is expensive. Other is for minor hotels using MCU and wireless modules,can save the development costs.

[Guest]

CURRICULUM VITAE

TATAJI.BEZAWADA
Email : tataji8183 AT gmail.com

Education Qualification :
1 B. Com (Computers ) : S.G.A.Govt.Degree College Elamanchilli affiliated to
Andhra University (2001-2004).
Computer Skills :
Packages : MS-Office 98 and 2010, FoxPro & Internet concepts.
Operating Systems : MS-Windows XP and Windows2003
: Softwares instalations and LAN settings also.
Work Experience :
1 Employer : M/s LARSEN & TOUBRO LIMITED, ECC DIVISON,
VIZAG STEEL PLANT EXP. PROJECT. Period : From 2009 July to countiune. Designation : Store Keeper.
2 Employer : M/s LARSEN & TOUBRO LIMITED, ECC DIVISON,
RMC PLANT, AUTONAGAR, VIZAG. Period : From 2007 to Apr 2009. Designation : ISD (Information system dept.) Operator. Designation : Store Keeper.
3 Employer : PANTALOON group of company BIG BAZAAR, VIZAG.
Period : From 2005 to 2007 Designation : In- Store Logistics
4 Employer : Margadarsi Marketing pvt ltd. (EENADU), VIZAG.
Period : From 2004 July to 2005
Designation : Area Sales Executive
ROLES & RESPONSIBILITIES :
- All material received to subject to verification to DC, and day to day inventory.
- To handling Larsen & Tourbo Ltd. (CEMA) package about of preparing for material receipt notes, purchase orders and day – day indent postings...
- To maintaining the issue counters of stores & sub stores...
- Monthly wise reconciliation on the materials of stores...
- To maintains the lubricants stock day-day wise and maintenance of store records including doumentation.

[Guest]

PIJUSH KANTI SARKAR
pijush_sarkar2008 AT rediffmail.com/pk.sarkar86 AT gmail.com
Seeking challenging career opportunities in Mechanical Engineering with an organisation of repute
Preferred Areas : Quality Control
An Overview
- Completed Diploma. (Mechanical) from A.J.C.B. Polytechnic, Berachampa, 24 Parganas (N) in 2004.
Academia
- Diploma. (Mechanical) from, A.J.C.B. Polytechnic., W.B.S.C.T.E. with 1st Division. in 2004.
- 12th from W.B.C.H.S.E. with 2nd Division in 2001.
- 10th from W.B.B.S.E. with 1st Division in 2001
- Completed the training course of Radiographic Testing Level II from SIGMA NDT SERVICES on dtd. 27.09.10.
Industrial Training
Organisation : Kalyani spinning Mills Ltd.
Project : Apprentices Training under Apprentices Act 1973 & 1986.
Description : Undergone 2 month training from 1st May 2005 to 30th June 2005.
Organisation : Lunar Industries (P-170 C.I.T. Road, Kol.- 10)
Post : QC & QA.
Worked Time : From 15th July, 2005 to 14th March, 2010.
Organisation : DATRE CORPORATION LTD, Falta.
Post : Jr. Engineer (Quality Control)
Worked Time : From 15th March, 2010 to 19th May, 2010.
Present Employment

SUPERINTENDENCE CO. OF INDIA LTD, Kolkata. An ISO 9001 :2000 Certified Company, in Non Destructive Testing (NDT) Department Form 20th May to till date.
Project : NTPC-Bongaigaon Thermal Power Project (3X 250MW)
Client : Bharat Heavy Electricals Ltd.(BHEL)
Post :-Quality Engineer (BHEL out-sourcing )
TOTAL EXPERIENCE : 06 Years (Quality Control)

[Guest]

RESUME
M.GOUSE BASHA
E-mail : gouse303 AT gmail.com M/S. PURBANCHAL CEMENTS
Objective : Seeking a position to utilize my skills and abilities in engineering industries that offers professional growth while being resourceful innovative and flexible, possesses a strong knowledge basic engineering curriculum, ability to deal with diplomatically, willingness to learn, keen on building strong team environment and fostering open environments.
Experience :
Company Name : Aswartha Condition Monitoring Engineers Pvt. Ltd
(2009’ July to Till date) Job Responsibilities : Engineer Providing the Service and
support to the customers in the
field of “ CONDITION MONITORING” of all Industrial Equipments. Providing solutions to all Industrial applications for improving the Life cycle time of the Machinery through “ Predictive Maintenance and Preventive Maintenance ” . Performing Trouble Shooting,
Vibration Analysis and Laser
Alignment of all Rotating
Equipments. Measuring Thickness of the
Tubes by using Ultrasonic Test Method. In-Situ single plane and multi plane Balancing. The collection of vibration data and processing of data using VAST data collector. Providing field support on rotating equipment to maintenance/operation to optimize production. This includes Turbine Generator sets, compressors, boilers feed pumps, boiler fans, and variety of pumps and other equipments. Analysis of vibration data and processing the data by using different software packages. Preparation of reports on machinery condition from collected and giving diagnostic recommendations for any remedial work necessary on the machinery. Computer literate together with Condition Monitoring knowledge and Analysis of vibration data and processing the data by using different Software packages .
Company Name : Fluid Analysis Consulting & Trading Co. (2005’ June to 2006’ April) Job Responsibilities: Engineer Diagnosis of Machine weardebris (Ferrography), Lube
condition (Lubrication Analysis) and reporting to avoid sudden Machine failures. Lubrication Survey & Audit in Various cement &steel plants. Machine Failure Analysis Training on Contamination Control Procedures and Lubrication Problems. Company and Product Presentation and Demo. Visit to industries after responding to inquiries and
understand customer needs and match with FACT product and services. Professional skills : Hands on (3 yrs) Experience in Predictive Maintenance and Preventive Maintenance of all rotating equipments. Performing Trouble Shooting, Vibration Analysis and Laser Alignment of all Rotating Equipments. Measuring Thickness of the Tubes by using Ultrasonic Test Method. Having good knowledge in Cement and Power plant operation. Computer literate together with Condition Monitoring knowledge and Analysis of vibration data and processing the data by using different Software packages . Diagnosis of Machine wear debris (Ferrography), Lube condition (Lubrication Analysis) and reporting to avoid sudden Machine failures.
Educational Qualification :
B.Tech (Mechanical Engineering) passed in April-2009 with 65.1% from Madina Engineering College, Kadapa affiliated to J.N.T.U., Anantapur, Andhra Pradesh.
Diploma (Mechanical Engineering) passed in May-2005 with 57% from Govt. Polytechnic, Proddatur, Kadapa affiliated to State Board of technical Education, Andhra Pradesh.
School of Secondary Education (S.S.C) passed in April-2002 with 72% from Netaji High School, Tadipatri, Anantapur, Andhra Pradesh, India.
Projects : Title: “ Study and Analysis of the production effectiveness, efficiency and productivity of Bio Mass Power Plant”
Done at : Chennur Bio Mass Power Plant, Chennur, Kadapa (Dist).
Title : “ Study the heat rate and performance of Steam Turbine”
Done at : Rayalaseema Thermal Power Plant, Muddanur, Kadapa (dist).
Title : “ Servicing and reconditioning of Diesel engines and Petrol engines in IC engine laboratory ”
Done in: IC Engine laboratory.

[Guest]

CURRICULAM VITAE
PradeeP Kumar Mavi
Email :- pradeep.mavi AT yahoo.com
Academic Qualification
Diploma in Mechanical Engineering (DME) 1ST Div. June 06.
From - :Institute of Advance Study & Education Po-Gandhi
Vidya Mandir SardarShar Rajasthan-(331401)
Administration :-
1. Looking after site activates.
2. Planning and programming for site erection activities.
3. Dealing with vendors and agencies involved in erection activities.
4. Billing , BBU and protocol works.
5. Working knowledge of windows XP
Professional Background
1. Name of Organization :- M/s Drooshaba Fabricators.
Duration :- 5th Feb 2007 to Augast’2009
Designation :- Site Engineer

Current Employment
Company :- M/s Elecon Engg. Co. Ltd.
Date of Joining :- 14th Sep’2009 to Till Date
Designation :- JR .ENG.
Project :- Coal Handling System At NTPC Dadri Thermal Power Plant (U.P)
Stage-II (2X490MW)

Nature of Work :- Erection, Testing & Commissioning of
Material Handling Equipment like.
Conveyor system thermal power station part required in material handling plant. Crusher, Paddle Feeder, Track Hopper, Traveling Tripper, Stacker Recamier, Fluid Coupling, Scoop Coupling , Linear Actuator, Thruster Break, Gear Box, Drive & Non Drive pulley, ILMS, Suspended Magnet, Metal Detector , Belt scalier, Coal Sampling Unit & Belt jointing solution, RPG (Rack &Pinion Gate), Flap Gate, Sum Pump.
Following type machine equipment erection & maintenance work handling satisfactory my ability. machine all type lathe machine, drilling milling machine machine motor pump hydraulic pump.

Doing Planning and programming for site erection activities.
Co-ordination with vendors and agencies involved in erection activities.
Billing , BBU and protocol works.

[Guest]

C.V. FOR A SUITABLE POSTION AT SENIOR LEVEL
SURAJ SINGH
Email : khalsa.suraj AT gmail.com / engineer123_suraj AT yahoo.co.in / bhag.singh AT jalindia.co.in
ENGINEERING PROFESSIONAL HAVING SIX YEARS PLUS EXPERIENCE IN SERVICING DEPTT IN THE CEMENT INDUSTRY.
Servicing knowledge of Construction Equipments , all types of heavy equipments
Engineering Skills :
Implementation of 5S.
Problem solving techniques implementation (7QC Tools).
Manpower management.
Team Leader of Kaizen activities.
Knowledge of ISO-9001, TPM, TS-16949.
Strong Influencing Skills.
AREAS OF EXPERTISE
(1) Servicing of;
(a) Construction Equipments i.e. Excavator (Backhoe, Loader), Heman-175 :
- Assemble & disassemble of Engine, Transmission System.
- Dressing up of main frame (Chassis).
- Dropping of Engine on main frame
- On line-1 (internal work) electric.
- On line-2 (external work) electric.
- Electrification of cab.
- Assemble, disassemble and servicing of Excavator, Loader, Lever, Heman-175.
- Fitting of Loader Arm, Boom, K.P.C. (King Post Carriage).
- Repair & maintenance of hydraulic system of complete TX-760 (Excavator).
(b) LMV
- Knowledge of overall repairing of all kinds of LMV
(c) HMV - Tata Buses, Trucks,Crawing Equipments.
- Assemble, disassemble and servicing of Engine and Transmission System.
(2) Manpower Management.
PROFESSIONAL EXPERIENCE
Present Company :
DALLA CEMENT FACTORY (A Unit of M/s JAIPRAKASH ASSOCIATES LTD), Dist. Sonebhadra (U.P)
Plant Engineer (Earthmoving Equipments) …….continued -> -> -> since September 2008
Company Profile :
Jaiprakash Associates Ltd is the flagship company of Jaypee Group, a Rs 10,000 crore well diversified infrastructure conglomerate with presence in Civil Engineering, Power, Cement, Hospitality, Real Estates, Expressway, Mining, Information Technology and across the entire spectrum of Education. Jaypee Group is renowned for its dynamic leadership and growth through its professional manpower. Jaypee group is an integrated power in the country after having established strong presence in the Hydro Power Sector, Thermal Generation, etc.
Job Profile
Working as Plant Engineer handling all issues related to daily servicing, reporting to Sr. Vice President. Responsible for;
planning of manpower and ditribution machines,
all types of maintence of heavy and light vehicles,
all types of break-downs (minior, major) and rectify them,
break-down analysing with help of 7-QC tools,
planning of spare parts,
indent processing systems,
safe working of m/c,
arranging training programmes for new operators for right operation of the machine,
maintenance of records of machines i.e. machine hystory card / log book,
collection of data for machinery down-time, reducing breakdown in co-ordination with team,
daily sunrise meeting with engineers and other staff,
maximum out put of machines.
Handling following machines :
L&T Komatsu make
1. Dozer D155-A : 02 nos.
2. PC 600LC -7 : 08 nos.
with front-end and bac hoe
3. Rock braker model HB - 4200 attached with PC 600LC -7 make Atlas Copco : 01 no.
4. Rock braker model JB-750T attached with PC 600LC -7 make Jisan : 01 no.
Hyundai make
1. Rock Breaker Model SG 1800 attached with Hyundai Hyd. Wheel Excavator Model R200W-7.
BEML make
1. Rear wheel dumper BH 35-2 : 07 nos.
Atlas Copco make
1. Drill master IDM-30 : 03 nos.
2. CM - 341(dth) 04 inches.
Chicago make
1. Air compressor CPS 600.
2. Air compressor CPS 450.
MAN FORCE TRUCK
1. Box tipper : 27 nos.
TATA MAKE
1. Tata Heavy Scoop type : 20 nos.
Previous Company
M/s DELPHI AUTOMOTIVE SYSTEMS PVT LTD (Greater Noida)
Senior Engineer July 2008 - September 2008
Company Profile :
Delphi Automotive Systems Pvt Ltd (an USA based company) is a manufacturer and supplier of;
Shocker and Air-conditioners to M/s Maruti.
Engine Mounts (models 2wd, 4wd) to M/s G M Motors (USA).
Its annual turnover is $ 700 Billion.
JOB PROFILE
Worked as a Senior Engineer, responsible for all issues related to Production, Quality, Maintenance and Customer Complains.
Responsible for servicing and maintenance of Phosphate m/c, Adhesive m/c, Injection Moulding m/c, Riveting m/c, Stroker m/c 100 Hz & 200 Hz.
Collection of data for rejection, re-work, and customer complaints, machinery down time data, reducing breakdown in co-ordination with maintenance team.
Planning for mould maintenance schedule, mould issues affecting productivity and quality, trouble shooting of m/c.
Checking-up of ‘check-list’ and ‘set-up-sheet’ of all machines.
Documentation as per QS 9000 and 14000.
Inspection of moulded part as per drawing according to defined schedule.
M/s TEREX VECTRA EQUIPMENT (P) LTD., GREATER NOIDA July 2005 - June 2008
Senior Engineer
Career Path;
- Engineer –> Sr. Engineer (Servicing)
Company Profile :
Terex Vectra Equipment (P) Ltd., is a 70 :30 Joint Venture between U.S. based Terex Corporation and Vectra of the U.K. Terex Vectra has recently launched a manufacturing plant of construction equipments (TX-760) Excavator, Road Roller, Cranes, Heman-175, etc., at Greater Noida. Terex Vectra is the biggest competitor of JCB, L&T, Escort, Caterpillar, ACE, etc. Terex Corporation, USA is the 3rd largest Construction Equipment manufacturer in the World. Its annual turnover is US$ 6.4 billions.
Job Profile
Worked as Senior Engineer responsible for all issues related to servicing, quality, and customer complaints.
Planning for manpower management.
Implementation of 5S in shop floor
Making job card, rectify problems and distribute the work according to priority.
Maintain schedule for overall servicing of construction equipments i.e. Excavator, LMV & HMV.
Checking of check-list of all vehicles.
Making MIS.
Making PDI Chart and preparing Green Card after servicing.
Working for continuous improvement.
Achievements
a) I have won the Spontaneous Award for bravery in fire fighting.
b) Implementation of 5S in shop floor in (US based company). Successfully finalised the consumption pattern of direct & indirect material in shop floor.
M/s TATA MOTORS LTD June’04 - June 05
(Pimpri, Pune-18)
Career Path;
D.E.T. -- Assistant Engineer (Servicing)
Company Profile :
Tata Motors Ltd is established in 1945. Tata Motors is India’s largest automobile company. It is the largest Commercial Vehicle manufacturer & 2nd largest Passenger Car manufacturer in India. It is the 5th largest Medium & Heavy Commercial Vehicle manufacturer in the World. The popular brand of the Company is Tata Indica, Tata Indigo, and Tata Sumo & Tata Safari. The total turnover of Tata Motors is Rs. 20,483 crore (USD 4.7 billions).
Tata Motors is the biggest competitor of Maruti, Honda and Hyundai Motors.
JOB PROFILE
Assembly, Disassembly & servicing of Light Motor Vehicle’s engine, transmission, differential and brake assembly.
Worked as an Assistant Engineer responsible for all issues related to Servicing.
Collection of the data for rejection, re-work & customer complaints, machinery down time data, reducing breakdown in co-ordination with team.
Line balancing, working with M.E. Team for better output of Servicing Dept.
Checking process on-line & process validation in co-ordination with M.E. Dept.
Planning for maintenance schedule, vehicles issues affecting productivity & quality, trouble shooting of vehicles.
.
Academic Qualification;
Basic Qualification –Passed matriculation in 2001 from HP Board Of School Education, Dharamshala by securing 53% marks.
Technical Qualification – Passed three year Diploma in Automobile Engineering in June 2004 from Govt. Polytechnic College, Sunder Nagar (HP), North India’s best polytechnic in 2004 (H.P. Takniki Shiksha Board, Dharamshala) by securing 64.57% marks.
PROJECT WORKS :
Major Project Work (one month training)
I had undergone an industrial training on Servicing of TATA busses (Engines & Transmission System) at Himachal Road Transport Corporation (HRTC) Tara Devi, Shimla (H.P). This is the biggest Divisional Workshop in Himachal Pradesh.
Minor Project Work
I had done minor repair & maintenance of Tata buses at H.R.T.C. Workshop at Mandi (H.P).
During my diploma studies;
Farm Tractor, Construction Equipments and Agriculture Equipments were my optional subject.
Computer Literacy
Knowledge of MS Word, MS Excel, PowerPoint, Internet, e-mail, awareness of system.

[Guest]

CURRICULUM VITAE
KARIKABBI SANTOSH N.
E-mail ID : karikabbi.san1982 AT yahoo.co.in
EDUCATIONAL QUALIFICATION :
ACADEMIC : Passed S.S.L.C. in the year 2000 Janata Vidyalay Dandeli Karnataka Education Board Bangalore…………..
TECHNICAL : Passed Diploma Mechanical Engineer in the year 2004 SUCPOLYTECHANIC Karnataka Technical Education Board Bangalore and doing in corresponding BE Mechanical Engineer KHK institute Dharwar
CAREER OBJECT : To be part of dynamic & professional organization, where I could practice & enhance my creative & analytical skills for achievement of organizational goals & self-development.
PRESENT WORK EXPERIENCE
ORGANIZATION :WEST COST PAPER MILL LTD. DANDELI
Appointed as a shift in charge (Grade S5) in paper machine (maintenance) from the effect of march 2009 to till date.
Dept : Present Working:-
Working in paper m/c 6 maintenance (VOITH) writing printing DCS high speed auto m/c with running speed of 1200 m/min(500ton)production per day.
Scope :1) during shut down m/c heavy jobs like press rolls, stretcher roll, calendar swimming roll cell, auto guide roll dismantle & O/hed
2)Pumps, Gear box, alignment & o/hed ,pneumatic & hyd. cylinder dismantle & o/hed
3)Converting section like copier cutters, miltex cutters, duplex cutters handling break down & preventive job.
4)Lubrication jobs like hyd. system ,COL system, & CGL system of pumps & valves repair & o/hed.
Job profile : handling all daily, weekly , monthly report, lubrication schedule reports ,preventive reports, paper works as move order, work order &j ob order….
shutdown & breakdown works ,running machine works(observation) & manpower work in shift wise as a shift engineer.
PREVIOUS WORK EXPERIENCE
ORGANIZATION : FORCE MOTORS LTD.PUNE (FORMERLY NAME AS BAJAJ TEMPO LTD)
COMPANY PROFILE :
A well known group in automotive business in India. We are manufacturer of three & four wheelers like Minidor, Trax, Tempo Traveller, Tractor, Mini Bus etc.1100 crores turnover in overall business recently we are collaborated with the heavy trucks manufacturing company MAN of Germany.
Department : Hydraulic Valve Shop (Tractor production supervisor )
Roll : Appointed as a Junior Engineer (Grade S2) from the effect of sept. 2007 .
Job Profile : 1. Setting of Hydraulic SPM machines
2. Production planning on daily, weekly & monthly basis
3. Making work instruction for part manufacturing & process
flow charts, control charts, control plan as per 4. Analysis of failed components from customer complaints & corrective action
· Appointed as a TRAINEE TECHNICIAN (Production) from Sept. 2006 to Jan. 2008 in Force Motors Ltd. Pune
Dept. : Hydraulic Valve Shop
Scope : 1. Planning.
2. Production & Quality Process Handling.
3. Machine operation line supervisor.
· Appointed as Assistant (Production Planning & Control) from the effect of 1st Feb. 2006 to 31th Aug. 2006 in Tata Motors, Car Plant, Chikhali, Pune
Roll : PPC Assistant in production
Dept. : Production Planning & Control
Duration : Seven Months
Scope : 1. Production planning
2. Inventory Tracking
3. System problems handling
· Appointed as a Trainee production Engineer from effect of june 2005 to Jan 2006 in Dhanesh Auto Electricals Ltd (lumax). Chakan, Pune
Roll : Trainee Engineer(production)
Dept. : production(assly)
Duration : One year
Scope : 1.Inward Inspection
2.production with Line Inspection
3. Handling quality documents & vendor complaints
4. Maintain Production schedule report
· Appointed as a Trainee Engineer from the effect of July 2004 to May 2005 in Super Mechanical Seal Pvt Ltd. Mhape, New Mumbai
Roll : Trainee Engineer
Dept.: machine shop
Duration: One year
Scope: 1. operator
2. Maintain all -related documents
3. Final Inspection
(DEAR SIR PLEASE DO THE NEED FULL TO MRE FOR THE JOB IN MECHANICAL MAINTENANCE AS A SHIFT IN CHARGE

[Guest]

CURRICULAM VITAE
PAVAN KUMAR KOTE
Email ID : pavan.kote AT gmail.com

Objective :
Aspiring for a highly challenging career as a project execution professional in a global environment where knowledge and excellence are given their due and opportunities are provided to hone the skills & strengths of individuals for assuming greater responsibilities.
Educational Background :
- B-Tech in Mechanical engineering, SACET, Chirala, AP.
- Diploma in Mechanical Engineering, Govt. Polytechnic, Vijayawada, AP.
IT Skills :
- AUTO CAD,
- MS OFFICE.
Professional Profile :
- Expertise in Production, Man Power & Maintenance Management.
- Having good analytical and communication skills.
- Flexible and versatile to adapt to new Technologies.
- Quick learner and excellent team player, ability to meet tight deadlines and work under pressure.
- Review of project based on the progress and targets achievements.

Experience Summary :
- Monitoring of Preventive Maintenance&Troubleshooting works of Plant & Machinery like Concrete Batching Plants, Crushing & Screening Plants, Hydraulic Excavators, Loaders, Bull Dozers, Air compressors, D.G. sets, HMV, Heavy Earth Movers, TELEBELT TBS-130.
- Preparing Indents for spare parts & co-ordinating with purchasing department.
- Preparing reports of costing & progress.
- Preparing budget for every month for Mechanical Workshop.
- Evaluate alternative materials/ processes to improve reliability and cost down. Establish and maintain a control system to evaluate, monitor, track, forecast and report project costs and percent complete project status accounting.
- Maintain and suggest improvement in a common set of terms and conditions to be used for project related requests for quotations and/or procurement activities.
- Member of Safety Committee to inspect, identify and reduce risks in the Project.
Project Experience :
S No. Name of the Organization From To Position Held
1 SEW INFRASTRUCTURES,
KANUPUR SPILLWAY PROJECT,
ODISHA 10.06.2011 TILL NOW GET MECHANICAL
(24000/- CTC PER MONTH)

PERSONAL INFORMATION :
Name : PAVAN KUMAR KOTE
Father’s Name : VENKATEWARA RAO.
Marital Status : UNMARRIED.
Date of Birth : 06.06.1989.
Place of Birth : GOSALA, KRISHNA DIST, AP.
Educational Qualification : S.S.C.
Technical Qualification : Diploma in MECHANICAL Engineering.
: B-Tech in Mechanical Engineering.
Nationality /Religion : Indian / Hindu
Languages known : TELUGU, ENGLISH & HINDI.
Declaration :
I hereby declare that the above particulars are true to the best of my knowledge.
Date :
Place : (PAVAN KUMAR KOTE)

[Unregistered]

CIRRICULUM VITAE

ROHIT C.BIDVE
E-mail :- bidve_rohit AT yahoo.com

OBJECTIVE :
I consider myself familiar with mechanical engineering aspects. I am confident of my ability to work in team.

PROFESSIONAL EXPERIENCE :
Presently working in – : Theatre solutions (India) (1st mar2012 to till date)
Company Profile : company is owned subsidiary of theatre solutions Inc.
(USA.)
The company manufacturing a auditorium chair, cinema chair,
Lecture seat, theatre seat, and push-back chair.
The company main market North America, South America,
Eastern Europe.

FUNCTIONAL AREA :
Functional Area -- Production
Key role -- PPC & Production Department

Kalyani Lemmerz Ltd. (17th sep 2010 to 31st jan 2012)
Company Profile : Kalyani Lemmerz Ltd. Is a join venture between
HayesLemmerz group.

The company manufactures wheel rims for utility & commercial vehicles.
It supplies wheels, Tata Motors, Volkswagen, mahindra,fiat, etc. It has heavy press line of capacity range from 80 Ton to 1000 Ton in both mechanical & hydraulic type. Company has heavy set up of SPMs like butt welding, profile rolling, flow forming, MIG welding.

EXPERIENCE :
- Two year experience in production line, As Jr.engineer.

STRENGTH :
- Good Communication skills, Leadership, Hardworking, Creativity, Challenge Seeker. Positive attitude, Co-Operative, Problem solver.
- Designation – Jr.Engineer
- Job Responsibilities :-
- Productivity improvement through setup & cycle time reduction by time study.
- Conduct daily audits on machine wise.
- Implementing Various kaizen for improve the process, of Production.
- Maintaining the delivery commitments
- Maintaining 5`s
- Handling assembly line
- Training to line workers
- Material Planning & arrangement for line
- Responsible for quality, productivity efficiency of line.
- Should have primary knowledge of production planning
- Man power handling & achieve production target..
- Final inspection of parts as per quality assurance plan..
- Trouble shooting at Assembly and Testing regarding production part quality
- Analysis of rejection, rework, scrap data procedure at in process &
Periodic review for corrective & preventive action to conform effectiveness.

Training Under Gone During Service
- 5`s
- Kaizen Activities
- SMED

EDUCATIONAL QUALIFICACTION :
DIPLOMA IN MECHANICAL ENGINEERING
Tilak Maharashtra University

SOFTWARE PROFFICIENCY :
- Database Systems : MS-OFFICE ,
- Working knowledge : I Link server,& ERP ( ST ERP )

PERSONAL DETAILS :
- Name : ROHIT C. BIDVE
- Sex : Male
- Date of Birth : 20.10.1989
- Marital Status : Unmarried
- Nationality : Indian
- Languages Skills : English, Hindi, Marathi.& kanadda
- Hobbies : playing cricket, travelling.

DECLARATION :
I hereby declare that the information furnished above is true to the best of my knowledge.

Date : 17/ 4/ 2013
Place : Baroda ROHIT C.BIDVE

[Unregistered]

Is there any vacancies for Diploma in Electronic and Communication Engineering?