www.itmprojects.com India Tube Mills & Metal Industries Ltd Vikhroli : Estimation Engineer

[muthukalee]

itmprojects.com

Estimation Engineer-Workshop Equipment (2)

Requirement of two estimation engineers
Would be reporting to the Head of Estimation.
This is a junior level position.
Should be familiar in the estimation of Pressure Vessels, Heat Exchangers, Process Columns and Agitators.
Experience of 5-10years needed in the estimates of the mentioned areas
Salary at par.

Location : Vikhroli

Apply Now

About us :
ITM is a leading manufacturer of static equipment for process plants and refineries in India. We are located in Vikhroli (West), Mumbai, India.Our products include Pressure Vessels, Heat Exchangers, Process Columns, Large Diameter Tanks (Cone Roof, Floating Roof, Dome Roof Low Temperature / Cryogenic Storage) and LPG Mounded Bullets. Our quality management system is certified by Bureau Veritas as per ISO 9001 :2008 and ASME U & U2.We are well equipped to design and manufacture equipments of all kinds of material of construction such as Carbon Steel, Stainless Steel, SANICRO 28, Cupronickel, Monel, Hastelloy etc. Our designs & fabrication conforms to various international codes such as ASME Section VIII Div. 1 & 2, BS 5500 and TEMA.

Contact us :
India Tube Mills & Metal Industries Ltd
L.B.S. Marg, Vikhroli(W), Mumbai 400 083.
Maharashtra, INDIA
+91 22 4254 6000
+91 22 2578 4443
http://itmprojects.com

[Guest-IJT]

Yagnesh M. Mandli.
B/30, Samarpan Tenament,
Nr.Jantanagar Rly crossing,
Ghatlodia, Ahmadabad. 380061.
Mobile No. +91886239903.
Mail ID:yagnesh.mech03 AT gmail.com

CARRIER OBJECIVE:
To make a challenging position where I can effectively contribute my skill as
Mechanical Engineer possessing competent Technical skill.

EDUCATIONAL QUALIFICATION:

B.Tech (Mechanical)
VIII th sem: 71.2%
VII th sem: 62.9%
VI th sem: 63.4%
Vth sem: 65.5%
IV th sem : 64.8%
III rd sem: 63.7% .

Futher Qualification.
D.M.E. Percentage:68.09% year of Passing:Dec-2005
R.C.Techmical institute,
A’ Bad.

12TH Percentage:48 % year of Passing:MAY-2003
SCIENCES(PCMB)
A’ Bad.

10TH Percentage:85 % year of Passing:MAY-2001
A’ Bad.

TECHNICAL SKIL:
I have completed AutoCAD 2D & 3D from Gujarat InfoTech ltd in June –2006 with Mark ‘A’ Grade.
I have completed PRO/E from CADD Center, Jaipur in March/April –2009.

ACHIVEMENTS:
2ND prize winner in the auto cad test organize in the college.

PROJECT:
The Gasket cutting machine in Diploma.
The six leg kinematic link mechanism in B.Tech
INDUSTRIAL VISIT:
Thermal power plant, Gandhinagar in DIP.
Hindustan Doroliver, Ahmedabad in DIP.
HMT Tractor Division, Chandigarh in B.Tech.
Kamani Engineering works, Jaipur in B.Tech.

INDUSTRIAL TRAINING:
Company: WELSPUN INDIA LTD Vapi, Gujarat.
Duration: one Month at the end of the 3rd year B.Tech.

EXPERIENCE:
COMPANY: AIA ENGINEERING LTD, Odhav GIDC, Ahmedabad
DESIGNATION: Estimation Engineer (junior Engineer).
Date of joining: 08-06-2006
Exp. period: one year.

OVER VIEW OF ESTIMATION WORKS:
* To check the customer design and view with AIA’s drawing and design.
* In the drawing we check the dimension, view machining & geometry etc.
* To check the metallurgy of product.
* To calculate the weight of product on the drawing (Raw Wight, Net weight).
* To check the customer requirement about machining design, metallurgy. Its
* Identification mark, symbols and its company symbol.

PERSONAL PROFILE:
Sex: Male
Marital status: Single
Nationality: Indian
Height 5’6”
Date of Birth 03/02/1986
Language known: English, Hindi, Gujarati.
Hobbies: Teaching, Reading Technical book.

DECLARATION:
I hereby declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of above mention particulars.
Thanking You,


Place: Ahmadaba (Yagnesh M. Mandli)

[Guest]

CURRICULUM VITAE
DAYANAND M SONAWANE
dayanand_sonawane AT rediffmail.com
Objective :
- To become a successful in the field of ‘Mechanical. Engg.’and to work in an innovative and competitive world.
- To contribute skills with the best of my abilities for expected growth and development.
Profile :
- Strong innovative and problem solving skills.
- Ability to learn and accept changes.
Present Job : -
Working in Novatech Project(i) Pvt.Ltd. as Sr.Engineer( Design & Estimation )from (May 2010-Till date).
Brief Responsibilities :-
Working on preparation of costing as per client requirement of heat exchanger, vessels and columns or tenders package.Floating enquiries of receive tenders for the materials, services, subcontract works, specific to project needs, for estimation, if required. Identification and recording of the assumptions / exceptions deviations made for the preparation of estimates. Preparation of cost Estimates and Techno-commercial Proposals in line with tender requirement. Checking of tender document prior to bid submission.
Job Experience : -
Worked in SV Tank & Vessels Ltd. as Design & Estimation Engineer from (April2009-May2010).
Current company : SV Tank & Vessels .ltd
Designation : Design & Estimation Engineer
Job profile :
Working on preparation of basic design& costing as per client requirement of heat exchanger, vessels and columns. Job involve the design & cost analysis as per the requirement of code & specification like ASME, IS2825,PD5500. Familiar with material. Knowledge of PV-Elite.
Job Experience : -
Worked in Techno Process Equipments (I).ltd as Design & Estimation Engineer from (Oct2006-April2009).
Current company : Techno Process Equipments (I).ltd
Designation : Design & Estimation Engineer
Job profile :
Worked on design & costing of heat exchanger, vessels and columns. Job involve the cost analysis as per the requirement of code & specification. Familiar with material.
EDUCATIONAL QUALIFICATIONS : -
Mechanical Process Equipment Design in 2008
Suvidya institute of Technology -Mumbai
Mumbai University. With second class
Course involved following Contents :
Design & Development.
Overview of P&ID & Process Datasheet
Relevant Codes and Standard Used in Industries.
ASME SEC. VIII DIV.1, API650, TEMA-RCB, IS875
Mechanical Design Calculation of Process Equipments.
(Vessels, Reactor, Heat Exchanger & Distillation Column)
Storage Tank Design.
Preparation of G.A. & Fabrication Drawing
Its Supports.
Diploma Of Mechanical Engineering In the year of -2005
Govt Polytechnic of Engg , Beed.
Second class (Maharastra State Of Technical Education, Mumbai )

S,S.C. In-Year 1999
Thirani Vidya Mandir ,Thane(W)
Second Class (Pune University)
Hobbies : Reading books, listing music etc.
I hereby declare that the above written participation are true to the best of my knowledge and belief.
Date :
(Dayanand M.Sonawane)