Cavotec India Ltd Pune : SolidWorks design Engineer

[desibanda73]

Experience : 4-8 Years
Location : Pune

Desired Candidate Profile :
** Expertise in Solid Works 2010, must have recent 3 years of hands on experience.
** Experience of Solid works configurations, design table & weldment are must.
** Added advantage, if you know Design Automation thru Excel &/or Visual Basic (VB or VB.net)
** Good understanding of SPM, Special Equipment design and development.
** Good understanding of Manufacturing Drawings and Production Processes.
** Knowledge of fabrication, welding, machining e.t.c required.
** Knowledge of using Hydraulic & pneumatics in machine tools
** Should have good mechanical calculations knowledge & analytical skills
** Knowledge in Geometric tolerance & different industrial standards like ANSI, JIS, DIN etc.
** Must be proactive, strong problem solving skills and exhibit good engineering judgments.
** Knowledge of working in PDM systems will be an advantage.
** Knowledge in Tooling, fixture and jigs would be a plus.

Job Description :
** The candidate will be a key & active member of Mechanical Design team.
** The person will support the team in design and development of Cavotec Group projects.
** Support the projects on CAD modeling and detailing activities.
** Generation of conceptual layouts & detail engineering with design calculations.
** Understand the product requirements and work with different team to implement new ideas.
** Responsible for process improvements and drive the cost reduction.

Company Profile :
The Cavotec Group is a global leader in supplying innovative power supply solutions that enable operators to improve their efficiency and sustainability. The Cavotec Group is committed to providing customers with as many pollution reducing solutions as possible, striving all the while to design and manufacture our new technologies affordably and practically.

Company Name : Cavotec India Ltd
Website : http://www.cavotec.com

Address :
Cavotec India Ltd
(Above HDFC Bank)
Phase-II Road
Hinjewadi, Pune -411057

Email Address : info.in@cavotec.com

[Guest]

Hello sir,
I am Manoharan.S I finish my Diploma in Electronics and Communication Engineering in 2008 with 68%,now i am searching for an right job,and also i attached my profile below kindly refer my profile then intimate as soon as possible.

with regards
Manoharan.S

RESUME :
MANOHARAN.S
E-Mail : mano_eletro85 AT yahoo.com
sagay.mano85 AT gmail.com

OBJECTIVE :
To become a professional engineer enhancing me with skills picked up at the field level and strengthen my theoretical knowledge with practical experience.
SIGNIFICANT STRENGTHS :
- Self confidence
- Willingness to learn things

EDUCATION QUALIFICATION :
COURSE INSTITUTION YEAR OF PASSING PERCENTAGE :
S.S.L.C Sarva jana, Higher, Secondary, School, Coimbatore-04.
2002 81%
Diploma in Electronics and Communication Engineering Sankara Institute of Technology, Saravanampatty, Coimbatore-35 2005-06

PROJECT :
COIN BASE SMS SENDER AND MOBILE CHARGER.

TRAINING UNDERGONE :
Implant Training in Net Fusion (Hardware)
EXTRA CURRICULAR ACTIVITIES :
- NCC
- NSS
EXPERIENCE :
- FOUR MONTHS IN WTI (SUBSIDENCY OF TCS)
- ONE & HALF YEAR EXPERIENCE IN OWN BUSSINESS(TILES RETAILER)
- EIGHT MONTHS IN SE FORGE (SUZLON)AS TRAINING IN PAINTING DEPT
- NOW IN AIRCELL ( MNP TESTING PROCESS)
HOBBIES :
- Playing indoor and outdoor games
- Cricket (Active Member “G” club).

[Unregistered]

UDAY ANANDRAO PATIL
E mail : udaypatil0921 AT gmail.com

Career Summary : (3.5+ Years Experience in Design & development, Projects)
- Design & development of Material handling equipment, pneumatic systems, Adhesive system & layouts
- Proficient in Sheet metal part Design, Drafting with Solidworks & Pro-E
- Sound knowledge of GD&T with tolerance stack up
- Parametric solid Modeling, Assembly and Drafting using Solidworks & Pro-E for different components
- Knowledge in preparation of documents like, vendor check-out, Engineering check-out & construction packages
- Responsible for planning & execution of project
- Execute the tasks within the specified targets
- Knowledge of PDM Link DRCS (Drawing Release and control system)
- Sound knowledge of Pneumatic systems
- Process & material selection based on product requirements for prototypes
- Comprehensive knowledge of manufacturing processes and supply chain principles of mechanical engineering
- Comprehensive knowledge of product life cycle management and computer-aided engineering
- Effective communicator with good troubleshooting and problem solving skills
- Possess strong communication, analytical, organizational and decision making skills

Professional Experience (3.5+ years)
- Currently working as a Design Engineer in Neilsoft Limited Pune, from 02 March 2011 to till date
- Worked as Trainee Engineer for Gurukrupa Engineering Pune, from 21 Jan 2010 to 25 Feb 2011
- Worked as Project Engineer for Shachi Engineering Pvt. Ltd., from 06 July2009 to 12 Oct 2009

PROJECT EXPERIENCE :
Organization : Neilsoft Limited.
Platform : Solidworks 2011, Autocad2008
Project 1 : The scope was to design & development of conveyor.
- Work Onsite for Two month regarding to design & development of conveyor.
- Existing conveyor having a bearing worn out, belt tore up & web jamming problems, so we design a conveyor which overcomes problems with taking care of feasibility, cost, quality, Modularity aesthetics & safety.

Project 2 : Diaper Machines
- Work for layout & pneumatic drawings.
- Modeling & Detailing of various Assemblies.
- Make vendor check-out, Engineering check-out & construction package documents.
WRE Project
- Parametric modeling & Detailing of packaging cartons with the help of Solidworks & visual basic programming, which reduces time by 70%.
Organization : Gurukrupa Engineering
Project 1 : Design & development of telescopic covers.
Platform : Pro-e 4.0, AutoCAD 2008
- Design & development of protection covers by reverse engineering.
Project 2 : Design & development of Bellows.
Platform : Pro-e 4.0, AutoCAD 2008
- Bellow are custom built to suit customer specification & requirement taking into account all external influences such as dirt, dust, swarf, oil, grease, abrasive and weld spatters etc.

EDUCATIONAL QUALIFICATION :
- B.E - Mechanical from Mumbai University with Distinction in the year 2009
- Diploma in Mechanical Engineering from M.S.B.T.E With First Class in the year 2006
- SSC from Kolhapur, Maharashtra State Board with Distinction in the year 2003

PERSONAL PORTRAIT :
- Marital Status/Gender : Single/Male
- Date of Birth : 21st Sep,1987
- Languages Known : English, Hindi, Marathi

The above statements are true to the best of my knowledge & belief.

Place : Pune
Date : / /2012 Patil Uday Anandrao