Hask Engineering & Management Pte Ltd Singapore : PDMS Instrumentation Designer, Electrical Designer

[muthukalee]

HASK ENGINEERING AND MANAGEMENT PTE. LTD. SINGAPORE : PDMS ELECTRICAL DESIGNER and PDMS INSTRUMENTATION DESIGNER

Company Name : HASK ENGINEERING AND MANAGEMENT PTE. LTD.
Company Location : SINGAPORE
Designation (of vacancy) : PDMS ELECTRICAL DESIGNER and PDMS INSTRUMENTATION DESIGNER
Company E-mail ID : sheila@haskem.com
Company Website : www.haskem.com

Job Description, Candidate Profile, Company Profile, Company Address :
3D Modeling of Cable Trench, Cable Tray, Lighting, Panels, Local Control Stations, JBs. Etc.
Lighting Design Calculation.
Voltage Drop Calculation for Lighting.
Development of standard installation details for cable tray, grounding and lighting.
Material take off for Lighting, cable trays, earthing, Cable etc
Development of above ground cable tray and conduit layouts, grounding layouts, Single Line Diagram, of underground trench and conduit layouts
Clash review, Squad Checking, Drawing Generation, Cable Scheduling etc
Development of Area classification layouts
Required to know and use Intergraph PDS-3D EE Raceway, PDMS SPR (Smart Plant Review),
Chalmlite Lighting Software.

INSTRUMENTATION DESIGNER JD :
Responsibilities :
Developing junction box termination details, cable schedules, cable tray sizing, cable length estimation, cable routing layouts.
Work out grouping of instruments, for JB’s as per inputs and outputs and air manifolds for air supply requirements depending upon elevations and proximity of instruments.
Modelling of Instruments & Junction Boxes in PDMS (DESIGN MODULE)
Co-ordination with other disciplines like for cut out requirements for tray/duct etc, clear access for junction box, instruments stanchion supports, air supply manifolds etc.
Checking and controlling of drawings/documents.

About us :
Haskem is a global service provider aiming to provide value addition and cost optimization in Engineering and Outsourcing Services to Marine, Oil & Gas and Heavy Engineering Industries.With our expertise and strong believe in innovations we are trying to bring a change on how the EPC projects are being done. What drives us is the challenge of
making things better and the power of thinking Big. We believe in experimenting our ideas and innovations, how small it might be for it will be the start of generating ideas to bring a change of how we live.

Contact us :
Hask Engineering & Management Pte Ltd
6001 Beach road
18-01 Golden Mile Tower
Singapore - 199589

50 Bukit Batok Street 23
04-23 Midview Building
Singapore - 659578
Tel : +65 62641440
Fax : +65 62622361

[Guest]

I am Instrumentation Engineer with over 12 yrs experience in Design, Commissioning of Instrumentation Systems & Electrical Systems. Please revert me by mail : mallikpatur@gmail.com

[Guest-IJT]

Name : PDMS PIPING DESIGNER
Email : sam_sureshkumar AT yahoo.com
Designation / Skillset : PDMS PIPING DESIGNER
Dear Sir/Madam,
I am interested to applying for the post of “PDMS PIPING DESIGNER".
Having 9 years of experience in the various phases of Design & Detailed Engineering of Offshore/Oil & gas/ Petrochemical/ Refineries/ LNG plants with EPC/ Engineering Consultancy.
Having skills in PDMS for piping.
- Preparation of Equipment layout & Piping layout.
- Preparation of overall Plot plan from the model
- 3D Modelling of Piping & Equipments in PDMS Software.
- Pipe support modelling and Extraction.
- Isometric extraction, Review, & checking.
- Spool isometric extraction, Review, & checking.
- Clash review in Interference checker.
- Model reviews.
- Preparation of MTO
- Interdisciplinary Coordination.
- Offshore Experience.
- Knowledge in ASME B31.1, B31.3, ANSI codes and standards.
- Having overseas experience in USA & UK
I have onsite experience like
Deputed in SBM ATLANTIA USA for DELBA III TDS 2500 Semi-Submersible
Drilling Rig (Offshore) project 4 month period - Aug-2008 to Dec-2008.
Deputed in EXTERRAN ENERGY SOLUTION Birmingham UK for ALIBEKMOLA and KOZASHAI project 2 month period - Aug-2010 to Oct-2010.
Now I am presently working with Exterran Energy Solution India Chennai.
As a first step in exploring the possibilities of employment through your service, I have attached my curriculum vitae for your perusal. I am glad to follow up through a phone call.

I can ensure you that I will be able to meet your expectations.
Expedite your favorable reply.

Thanks and Regards,
M. Sureshkumar
Email : sam_sureshkumar AT yahoo.com


Resume :
PROFESSIONAL SUMMARY
Having 9 years strong Experience in Design and modeling of piping systems in Upstream and Downstream of Offshore, Refinery, Petrochemical and OIL & GAS Industries in global projects.
Strong Experience in Aveva Plant Design Management system (PDMS)
To have a Challenging Carrier in Piping Design.
SKILL SUMMARY
- Preparation of Equipment layout & Piping layout.
- Preparation of over all Plot plan from the model
- 3D Modelling of Piping & Equipments in PDMS Software.
- Pipe support modelling and Extraction.
- Isometric extraction, Review, & checking.
- Spool isometric extraction, Review, & checking.
- Clash review in Interference checker.
- Model reviews.
- Preparation of MTO
- Interdisciplinary Coordination.
- Offshore Experience.
- Knowledge in ASME B31.1, B31.3, ANSI codes and standards.
- Having overseas experience in USA & UK
PROFESSIONAL QUALIFICATION
- Diploma in Mechanical engineering - APRIL 2002
COMPUTER SOFTWARE SKILLS
- Working Experience in the following Modules of PLANT DESIGN MANAGEMENT SYSTEM
PDMS – 12.0 – 3D Modeling AVEVA. (PDMS 11.5, 11.6, 12.0)
a. Pipe work – 3D Piping Modeling. (PDMS)
b. Isometric Extraction (PDMS)
c. Equipment Modeling – 3D Equipment Modeling (PDMS)
d. Support Modeling – 3D Supports Modeling and Extraction (PDMS)
e. Drafting in layout –Draft Modeling (PDMS)
f. Navies Works Freedom 2011
g. AutoCAD 2009
h. DOS, WINDOWS XP, MS Office Environment.
PRESENT EMPLOYER
Organization : M/s. Exterran Energy Solution India (P) Ltd.,

Handled Project : ALIBEKMOLA and KOZASHAI Project.
(NOW DOING SHELL IRAQ. PROJECT)
Location : Chennai, India.

Designation : PDMS Piping Designer
Deputation : Birmingham, UK. May 19th 2010 to June 30th 2010

Responsibility : Working Area in ALIBEKMOLA Project:-

Sulfur Recovery UNIT (SRU) in this unit having skids like 1.catalytic reactor, 2.Reheat exchanger, 3.Thermal reactor, 4.Process blower, 5.Sulfur condenser and 6. Final sulfur condenser.
Equipment modeling & pipe routing using information from P&ID, Spec data sheets, Vendor details and equipment layouts. Study of process flow sheets, P&I diagrams, equipment layouts and plot plans and model updating. Detailed input of piping systems incorporating all necessary line slopes, instrumentation, valves and special piping component items, and jacketed lines. Prepare/update Pipe Layouts, Piping Supports layouts, equipment layouts, safety & escape route drawings using PDMS draft as well as AutoCAD. Resolving clashes and extraction of clash report and data consistency report. Co-ordination with other disciplines and other piping designers. Extracting of Piping GAD’s, Isometric extraction from PDMS. Selection and modeling of pipe support. Isometric checking and resolving the problems. Coordinate with other department like structural, E&I &Mechanical to solve the respective problems. Model review by NavisWorks Freedom software.
Client : KAZAHOIL AKTOBE LLP.

Period : From June 2009 to till date.
PREVIOUS EMPLOYER
Organization : M/s. Luminous Engineering Services Pvt, Ltd, Noida, India,
Deputation : M/s. SBM Atlantia Inc.
Handled Project : DELBA III TDS 2500 Semi-Submersible Drilling Rig (OFFSHORE)

Location : Houston, Texas77077, USA.

Designation : PDMS Piping Designer

Responsibility : Working Area in this Project:-
Port fwd pontoon, port Mid Pontoon, port Aft Pontoon, port fwd column, port Mid column, port Aft column, Below main Deck, Main Deck, Sack/Cement Room, Mud pump/Pit pump, Engine Rooms, Mezzanine Deck, and Pipe Rack Deck.
Pipe Routing for various services as per P&ID, Spec data and equipment layout. Equipment modeling as per the vendor drawing. Selection and support modeling as per the supports standard. Prepare the equipment layout and piping layout from PDMS draft module. Prepare the mechanical handling layout. Extract the isometric drawing from PDMS. Prepare the data consistence and clash reports along with Iso’s. Generate the MTO list from the PDMS as well as manually. Pipe routing from Isometric drawing to PDMS model. Coordinate with other disciplines and other piping designers.
Client : DELBA DRILLING INTERNATIONAL CO-OPERATIVE U.A

Period : From July 10th 2008 to April 2009.
PREVIOUS EMPLOYER
Organization : M/s. J. Ray McDermott Engineering Services Pvt Ltd.

Handled Project : D5595G MAERSK PACKAGE-13 (OFFSHORE)
Location : Chennai, India.

Designation : PDMS Piping Designer
Responsibility: Working Area in this Project:-
Wellhead manifold, utility station, Test Separator, Fuel Gas Treatment, Water injection Launcher, Crude oil receiver, Wet gas receiver.

Systems handled:-
Hazardous Open Drain and Closed Drain, Utility station systems (Inert gas, Utility air, Seawater), Fire water, Crude oil, Wet gas, Water Injection.
Equipment modeling & pipe routing using information from P&ID, Spec data sheets, Study of process flow sheets, P&I diagrams, Equipment layouts and plot plans and model updating. Prepare/update Pipe Layouts, Piping Supports layouts, safety & escape route drawings using PDMS Draft as well as AutoCAD. Resolving clashes and extraction of clash port and data consistency report. Co-ordination with other disciplines and other piping designers. Extracting of Piping GAD’s, Isometric and Spool extraction from PDMS.Selection and modeling of pipe support. Isometric checking and resolving the problems. Coordinate with other department like structural, E&I &Mechanical to solve the respective problems.
Client: MAERSK OIL QATAR UAE.

Period: From 15th Oct 2007 to 30th June 2008.
PREVIOUS EMPLOYER

Organization: M/s. Foster Wheeler India (P) Ltd., UK Based Co.,

Handled Project: Lucite International ALPHA 1 Project.
Location: Chennai, India.

Designation: PDMS Piping Designer

Responsibility: Pipe Routing for various services as per P&ID, Spec data and equipment layout. Equipment modeling as per the vendor drawing. Selection and support modeling as per the supports standard. Prepare the equipment layout and piping layout from PDMS draft module. Prepare the mechanical handling layout. Extract the isometric drawing from PDMS. Prepare the data consistence and clash reports along with Iso’s. Generate the MTO list from the PDMS as well as manually. Pipe routing from Isometric drawing to PDMS model. Coordinate with other disciplines and other piping designers.
Client: Lucite International Singapore.

Period: From Feb 2006 to Sep 2007.

Organization: M/s. Maxtherm Technologies Pvt Ltd.

Location: Chennai. India.

Designation: Piping Designer

Period: From July 2004 to Jan 2006.

Responsibility: Design of Piping and Equipment (boiler) Layout and Isometric View
Create Piping GAD`s. Checking Existing drawings as per
Tie-in Isos. Preparation of Supports for relative Piping.
PREVIOUS EMPLOYER

Organization: M/s. Spyro Engineers

Location: Chennai. India.

Designation: Piping drafts man.

Period: From July 2002 to July 2004.
Responsibility: Preparation of Equipment Layout, Piping layout.
And Checking Routing.

Declaration
I hereby declare that the above information is true to the best of my knowledge.
Date:

Station: Chennai
(M. SURESH KUMAR)
Reference name
1. D. Elumalai
Senior PDMS Designer - PIPING
M/s. Exterran Energy Solution India (P) Ltd.,
Chennai – India.
Email: Elumalai.Devaraj AT Exterran.com
2. David Tovar
Senior PDMS Designer - PIPING
M/s. SBM Atlantia Inc.
Houston, Texas 77077, USA.
Email: David.Tovar AT sbmatlantia.com
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4361942
Date & Time : 12th Jul 2011 11:04 AM (UTC)
IP Address : 124.124.56.82
Browser Info : Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET CLR 1.1.4322)
Predicted Country : India