Nagarjuna Oil Corporation Ltd Cuddalore : OPERATIONS / PROCESS / INSPECTION / LABORATORY / ENGINEERING SERVICES/ SUPPLY & DISTRIBUTION

[Guest]

Nagarjuna Oil corporation Ltd Cuddalore : OPERATIONS / PROCESS / INSPECTION / LABORATORY / ENGINEERING SERVICES/ SUPPLY & DISTRIBUTION
Company Name : nagarjuna oil corporation ltd
Company Location : cuddalour
Designation (of vacancy) : OPERATIONS / PROCESS / INSPECTION / LABORATORY / ENGINEERING SERVICES/ SUPPLY & DISTRIBUTION
Company Website : www.nocl.co.in

Job Description, Candidate Profile, Company Profile, Company Address :
About us :
Nagarjuna Oil Corporation Limited, a subsidiary of Nagarjuna Fertilizers and Chemicals Limited, is focused on pursuing the opportunities in Oil and Gas domain. The company is currently involved in developing a petroleum refinery project at Cuddalore, Tamil Nadu.Nagarjuna group has partnered with State Government of Tamil Nadu and the Tata Petrodyne Ltd. along with few reputed corporate groups to implement the refinery project. The project participants bring with them strong expertise and experience towards development of the refinery project.

Contact us :
Kayalpattu Village,
Poochimedu ,Cuddalore District -608801
Tamil Nadu, India

Areas
OPERATIONS / PROCESS / INSPECTION / LABORATORY / ENGINEERING SERVICES/ SUPPLY & DISTRIBUTION

Qualification

Engineering Graduate / Diploma holders with relevant experience
Duties & Responsibilities
The roles and responsibilities would relate to the Junior/Middle/Senior Management positions in a typical refinery – various areas as cited above.
The detailed job description will be shared in the next stage of selection process.

Knowledge, Skills and Abilities
Knowledge in relevant areas of experience including the processes and their Engineering Discipline.
Candidate should be a good team player with good learning capabilities

Apply here:
http://www.nagarjunaoil.com/JL-ML-SL.asp

[Guest]

CURRICULUM VITAE
Akhil Nimbalkar
Email : akhilnimbalkar AT gmail.com , akhil.nimbalkar AT yahoo.co.in

OBJECTIVE :
To work in a stimulating and challenging milieu that would facilitate the maximum utilization and application of my skills and expertise in making a positive difference to the organization.

SYNOPSIS :
Young, energetic and result oriented Petro-Chemical Engineer recently entered into the world of chemical Industry; Manpower handling, trainings, meeting production timeline, target and monitoring plant P & ID corrections. Persuasive communicator with exceptional relationship management skills with the ability to relate to people at any level of business and management; Adroit at analyzing the organization requirements; highly ethical, trustworthy and discreet;
- Skilled Team leader with proven ability to lead and motivate co-workers to maximize productivity
- Exceptional communication, analytical, technical and inter personal and problem solving skills with eye of detail
- Friendly with an upbeat attitude
- Good decision making skills with a positive approach
- Dedicated and ambitious to achieve personal as well as the organizational goals

CORE COMPETENCIES :
- Implementation
- Coordinating
- Proactive
- Detail Oriented
- Problem Solving
- Planning & organizing

WORK HISTORY :
1. HRS Process System Ltd. (20/01/2011 To Till Date)
Role : Marketing Engineer & Designing of Heat Exchanger
Designing :-
- Designing of Corrugated Tube Heat Exchangers using HED(Heat Exchanger Design) Software
- Thermal calculation is carried by HED software
- Mechanical Design with ASME Code and TEMA Standard Using PV Lite Software
- Giving Service for PHE.
Marketing :-
- Assisting the group in marketing of heat exchangers and other products
- Evaluation of the best opportunity in the local market, develop & manage adequate sales avenues in the region
- Cultivate top level relationship with key customers and implement strategies
Equipments :
- Shell & Tube Heat Exchanger (Ecoflux, Unicus)
- Corrugated Shell & Tube Heat Exchanger for better heat transfer, less fouling factor
- Double pipe Heat Exchanger, Triple Pipe Heat Exchanger (Concentric)
- Plate Heat Exchanger
- Piston Pump
- Food Processing System
- Evaporator

2. Abhideep Chemical Pvt. Ltd (Multi Organics Organization) (23/08/09 To 25/12/10)
Role : Production Engineer (Trainee Engineer)
It is a Petrochemical Product which is used in dye industries (exports) Byproduct is Tar.
Key Deliverables :
- Handing manpower
- Shift Incharge
- Production Engineer
- Planning & Organizing of Production timelines
- Log sheet handling
- Responsible to maintain Plant P and ID corrections
- Process handling.
- Troubleshooting
Operation Handled :-
- Vacuum Distillation Unit
- Extraction Unit
- Neutralization Tank Reactor Unit
- Dring operation
Equipment Handled :-
- Filter Press
- Autoclave
- Simple Distillation
- Vacuum Distillation
- Glasslined Reactor
- Reactor
- High-Pressure Vessel
- Boiler
- Drier
- Centrifuge
- Cooling Tower
- RVD (Rotary Vacuum Drier )
- ETP Section
Projects Handled :-
- Performing experimental and R&D works for different products on 200 Litters Glass Reactor Pilot Plant.
- Successfully handled projects on preparing BON6 acid.
Products :-
1. Beta oxalo Napthalet Acid (BON3 Acid)
2. Sodium Sulphate
3. Beta Napthnol
Achievements during tenure :
- Monetary hike due to best performance in the Training Batch

EDUCATION
Graduation -
Branch : Petrochemical Engineering (B.E)
College : M.I.T College of Engineering, Pune, Pune University in 2009 with 61.8%
Secondary and Higher Secondary Education –
Exam Institute/College Board Percentage
SSC Jindal public school, Nagpur M.S.B 70.13%
Dip. In Chemical Govt.poly.Arvi, Wardha M.S.B.T.E. 61.92%

ELECTIVE SUBJECTS :
- Petroleum exploration
- Refining Operation
- Petrochemical processes

CERTIFICATION :
- Doing P.G. Diploma in Process Engineering from M.I.T.

REWARDS & RECOGNITIONS :
- 1st prize from International Institute of Information Technology OGTech ‘08, Pune.
- Certificate of Participation for Technical Quiz from Maharashtra Institute of Technology, Pune.

SOFTWARE KNOWN :
- Internet Surfing & E-mail.
- MS. Office ,MS-excel
- Hysis
- Aspen Plus

[Guest]

Rajkumar.M.S
(Department of mechanical Engg)
rajahome86 AT yahoomail.com

CAREER OBJECTIVE :
To apply my skills on challenging assignments, which let me exhibit and nurture my technical acumen and communication skills as an active member of the team and always aspire to fulfill the accomplishment of the organization and self-growth.

SYNOPSIS :
- Degree with first class in Bachelor of engineering (Mechanical stream).
- A result oriented professional with total of 4 Years of rich experience.
- Confident team player, self-motivated and communicative to achieve exceptional performance.
- Excellent inter-personal skills & a team player ability to work in multi cultural environment.

WORK EXPERIENCE :
APR’07 – Present, Titanium Tantalum Products Limited (www.titanindia.com)
Titanium Tantalum Products Limited, an ISO 9001 : 2008 certified multi product company with an undisputed leadership in the field of exotic metal chemical equipment design, manufacturing, erection/commissioning and services since 1981. TiTaN offers design, manufacturing and refurbishment of heat exchangers, pressure vessels, valves, pipes & fittings, thermo wells, cathodic protection anodes, electrodes for electrochemical and aerospace applications, Electro chlorinators and Turnkey Projects etc.,
Designation- Material planning engineer.
Core-Responsibilities :
- Planning & scheduling of job orders and monitoring (in MS project and SAP).
- Monthly schedule preparation based on client delivery requirement.
- Co-ordination with Design, Materials, Production, QC and Vendors to meet the client’s delivery date and Regular follow-up of job orders.
- Coordinating with Design and sales coordination team to send the documents for client approval and ensuring timely receipt of the same approved documents.
- Sending Inspection release certificate and packing list to the clients to get dispatch clearance.
Notable Accomplishments :
- Successfully completed the major job orders in planned time by expediting effective co-ordination.

KEY TECHNICAL SKILLS :
- System Application Product (SAP) – MP (Material planning) and PS (Project structure) modules
- Hands on experience on the various transaction codes in (PP and PS) module.

COMPUTER KNOWLEDGE :
- Design/analysis package : AutoCAD, Pro-E, ANSYS,
- Professional package : MS-Project, MS-Excel (MS Word and MS Power point)
- ERP System : SAP ERP 6.0 (Design, MP & PS Module)
- Operating system : Windows 98/XP, windows Vista.

ACADEMIC CREDENTIALS:
- Graduation- Bachelors in Engineering (B.E) in April 2007 From Bharath University, Chennai- Percentage of marks : 70.2 %.
- SSLC (TN State board) –83% marks, H.S.C Bio maths (TN State board) –72% marks

EXTRA & CO-CURRICULAR ACTIVITIES :
- Final Year Project : Title: “Design and analysis of Fixture for Draw Gear Assembly using ANSYS” at ICF – Chennai.
- Active team member in NSS, CUIC state level placement program and student’s placement canvassing team during college days.

[Guest]

Srinivasan
E-mail : srinivasan357_rv AT yahoo.co.in

OBJECTIVE :
To acquire a significant position in an environment that assist to explore and apply my knowledge for industry with my technical ability.

EXPERIENCE :
One year EXPERIENCE in DELPHI-TVS diesel systems ltd, Sriperumbudur.

PROFESSIONAL PROFILE :
- Extensive Knowledge in quality checking & quality inspection on line inspection.
- In quality engg Department I have used (vernier calibration, micrometer, Height gauge, Dialgauge, Trimos, Rondcom, Surfcom, OGB, Air gauge, Plug gauge) Gauges for checking(Parallelism,Roundness,Straightness,Finish,Symmetry,Perpendicularity).
- 5’s Activities- I have learnt Japanese technique for keeping our workplace as most clean (Seiri,Seiton,Seiso,Seiketso,Shitsuke)
- TPM-I have learnt about a tool says Total Productivity Maintenance which helps to achieve Best of Production Quality Cost Delivery Safety Morale in our Products.
- Product Layout- I have learnt how can read & how can do a Product or Process layout for a new developing component

CAREER FOCUS :
- Dynamic change agent skilled in Electronics Production, Quality, Testing Process, Troubleshooting and Failure analysis thereby improving Customer satisfaction by Imbibing Quality Assurance to achieve operational and manufacturing excellence.
- As Testing Engineer During the period Of (JAN 2010 – SEP 2010).
- As R&D Engineer During the period Of (OCT 2010 – DEC 2010).
- As a Quality Engineer During the period Of (JAN 20111-APRIL 2011)
- Presently working with FALCON TECHNOLOGIES INTERNATIONAL(DUBAI) As a PROCESS ENGINEER
- In-depth knowledge in Process Integration, Assembly and testing electronics PCBA’s, Digital & Analog Hardware Trouble Shooting.
- Hands on experience of working in ERP system (Oracle base) environment.
- Exposure in ISO 9001 :2000 Quality Management System requirements and maintaining Relevant records.
- Daily, weekly and monthly scheduling for production.

CAREER HIGHLIGHTS :
MANATEC ELECTRONICS PVT LTD.
- Manatec Electronics is a leading automotive garage equipment manufacturing company in India with indigenous R&D Technology. The range of products includes Wheel Aligner, Wheel Balancer, Automatic Tyre Inflators, Pollution control equipments & two post lifts.
- It is a ISO 9000 :2000 certified company. The company caters to the OE market in India & the Major customers are Ford, Hyundai, M&M, Maruthi Suzuki etc. LEADING GARAGE EQUIPMENT MANUFACTURE IN INDIA.

TRAINING UNDERGONE :
Undergone an inplant training on manufacturing operation for a period from
21st –apr-2008 to 28th –apr-2008 in lenovo(india) (p) ltd pondicherry.

ACADEMIC QUALIFICATIONS :
- Diploma in Electronics and Communication Engineering (84%) (2008 pass out), Krishnasamy Memorial Polytechnic College, Cuddalore.
- Degree in BCA(Bachelor of Computer Application) - Final Year , Annamalai University
- HSC (71%) (2005 pass out) from St. Joseph’s Higher Sec. School, Cuddalore.
- SSLC (74%) (2003 pass out) from St. Joseph’s Higher Sec. School, Cuddalore.

Software skills :
- Programming Languages - C, C++
- Well versed with WINDOWS, MS Office
- Will verse User of ERP Software (Oracle).

PROJECT DONE :
Title : Multichannel Water Level Controller.
Description : It is used to control the water level in water tank.

[Guest]

Email :nusrupp AT gmail.com

OBJECTIVE :
Seeking a challenging Career in progressive organization, offering an opportunity for professional development and career growth.

ACADEMIC QUALIFICATION:
Course Institution Board university Year of passing :
DPCE Nanda polytechnic college, Erode-52 Directorate of technical education April 2011
HSC P.T.M.Y Higher secondary school Edappalam State Board March 2008
SSLC P.H.S Nadaparambu State Board March 2006

PROJECTS :
- In- Plant training in T.C.C& Ltd. Kochin

DECLARATION :
I here by declare that all the above mentioned information are correct up to me knowledge and I here the responsibility for the correctness of above mentioned particulars .
Date : Signature:

[Guest]

K.SITRARASON
E-mail Id : tkarthingt AT gmail.com

Objective :
To get a challenging career in a good organization, which enables me to come up with the emerging as well as latest technical development, offers scope for widening the spectrum of my knowledge and which would need me to apply all the knowledge that I have gained.

Assets :
- Good analytical and communication skills.
- Good rhythmic speech.
- Enthusiastic worker in a team.
- Positive attitude worker.

Academic Qualification :
Course Institute Board/Univ. Percent :
B.E., Electrical And Electronics Engineering (2006-20010) E.G.S.Pillay Engineering college, Nagapattinam. ANNA University 64%
Hr.Sec., National Hr.Sec.School Nagapattinam. State Board 77%
S.S.L.C National Hr.Sec.School Nagapattinam. State Board 66.6%

Expertise :
Languages : C, C++
Package : Ms-Office,Ms-dos,Ms-windows.,
CADD COURSES
- ELECTRICAL AUTO CADD DESIGN
- PC SCHEMATIC AUTOMATION DESIGN
Team size : 4
Duration : 1.5 months
Position : Team Leader

Extra Curricular Activities :
- Participate in NSS
- Event organizer in all school and college annual day functions and other technical events.
- All Kind of Electrical and Electronic Goods are maintained.
- Try to do ELECRICAL

PROJECTS :
- House wiring
- To help the TSUNAMI affected people
- Won prizes in FOOT BALL Competition
- Science and technology

EXIHIBITION :
Project 1
- REMOTE OPERATION AND MONITORING OF ESP RAPPING MOTOR USING TCP/IP PROTOCOL
- Using Device :
TCP/IP PROTOCOL
SENSOR
MICRO CONTROLLER
RAPPING MOTOR

Description :-
At present,NLC adopts manual operation to remove ash deposites in the ESP we have decided to desine and develop an EMBADDED BASED SYSTEM to meet out the requirements and also provide the status of the ESP control room to the unit control room, which locate at 13.5miles , as a remoute annunciation system using "TCP/IP”
Institute : NLC POWER PLANT

Field of interest :
- Transmission & Distribution
- Electrical machines

In plant training :
- Puduchery power corparation Ltd,karaikal

Working experience:
- I have one year experience in Testing department in Aquatex(texmo) engineering pvt ltd.,Coimbatore.

[Guest]

S.KATHIRVEL
E-mail :kathirvel377 AT gmail.com

CAREER GOAL :
Seeking managerial assignments in Professionally Managed Organization where I can utilize my technical & Managerial Excellence for the benefit of the Organization.

PROFESSIONAL EXPERIENCE :
A highly accomplished professional with over 6 plus years of rich & extensive experience across various segments :
1. STANADYNE AMALGAMATIONS (P) LTD, Chennai (An ISO/TS-16949 firm)
[Part of Amalgamation Group, manufacturers of Diesel Fuel injection Pump for Agricultural vehicles. An ISO-TS : 16949 certified company.]
GROWTH PATH :
April’ 06 to Feb’ 07 Trainee – Production.
March’ 07 to Nov’ 08 Technical Assistant – Tool Room & Tooling Planning
Dec’ 08 to Jan 12 Senior Technical Assistant – Production Planning & Control

2.RICE LAKE WEIGHING SYSTEMS INDIA LIMITED, Chrompet
Feb12 to till date Engineer – Production Planning Control
KEY RESPONDSIBILITES :
MANUFACTURING :
- Operate the CNC Machining Center & Grinding Manchine.
- Assemble done by IFS,QLC, YANMAR, & Southren Agro Pumps.
- Assemble in Injector (RSN,KOEL,ASHOK LEYLAND, MAHINDRA NAVISTAR
- Operate the Sunnen honing & Fngis bore finishing machine.
- Monitoring hourly & shift output.
- Monitoring daily scrap & PPM.
- Monitoring daily FTY in an assembly line.
TOOL ROOM :
- Tooling Management
a. Tool planning
b. Control of Issue & Receipt
c. Tool cost reduction
d. Tool resharpening
e. Prepare a monthly tool budget
f. Tool life monitoring in an each station
- Tools inspection
- Managing the Tool room Activities
- Tools resharpening & center lapping
- Tools purchase request raising based on production plan.
- Design of tools & Fixtures in AutoCAD.
- Manufacturing urgent fixtures in tool room.
- Maintain the 5S in tool room area
PRODUCTION PLANNING & CONTROL :
- Monthly Work order creation and execution to meet production target.
- Preparation of Master Production schedules.
- Monitoring & Reducing the production Gap.
- Preparing machine loading sheet in daily.
- Material planning based on Weekly & Monthly customer demand.
- Preparation of predetermined schedule based on dispatch plan.
- Follow - up interaction with purchase & Supplier quality assurance
- Monitoring daily production against orders.
- Classification of ABC and Runner, Repeater and Stranger Matrix.
- Monthly reconciliation of Inventory stock with physical stock at WIP
- Monitoring the Level of Inventory.
- Maintaining safety stock both at WIP and at ware house side and thereby planning the production to meet our customer’s requirement.
- Monitoring daily customer production.
- Daily Production Schedule to give production department.
- Preparation for capacity planning & Timing sheet.
- Preparation for achieving ISO – 14001 & TS 16949 documents.
- Effective use of available resources and man power in production.
- Monitor a daily scrap details & scrap cost.
- Monitor the daily PPM (parts per Million).
2. DELPHI – TVS, SRIPERUMPUTHUR.
Short Term Trainee - Manufacturing
OCT - 05 TO MAR – 06
- CNC Machine OPERATOR (Machining Centers).

Achievements :
- Inventory control – reduced 10% of inventory by developing indigenous sources.
- No line stoppage at production end.
- Reduced Excess freights.
- Planning performance Improvement From 60% to 85%.
- Cost reduction tool & consumables.
- Reduce the materials & Tool scrap cost
- Introduce the IN-House regrinding in Drills, Reamers, End mills, Gun drill, & Taps.
- Introduce the IN-House regrinding & re-lapping in male & center .
- Team leader in KANBAN implementation team.
- Member in Quality circle.

ACADEMIC INFORMATION :
Bachelor of Technology (Mechanical)(Part time)(74% & waiting for Last Sem Result) 2007 - 2011, SRM University, Kattankulathur, Chennai
Diploma in Mechanical Engineering (77% with First class) 2003 – 2005, Swamy Abedhanandha Polytechnic college, Thellar, TV malai Dist. .
HSC (passed) (In Government Higher Secondary School, Ranipet. Vellore)

TRAININGS UNDERGONE :
- Two month course Two & Four wheeler training program in Karivaradhan vocational training in Coimbatore.
- One day training program on SPC.
- One day training program on 5S.
- Two days training program on Kanban.
- One day training program on Safety.
- One day training program on ISO : TS 16949/2002.
- Training Program in Lean Manufacturing.

COMPUTER SKILLS :
- Auto Cad 2002,
- Pro-Engg Wildfire 3
- ERP (Ramco)
- Sap
- Well versed with Windows, MS Office & Internet Applications.

Declaration : I do here by declare that the information about me are true to the Best of my knowledge and belief.
Date : 3-May-12
Place : Vellore
S. Kathirvel

[Unregistered]

SIVAPRAKASH.S
Email ID : sivaprakashdpc AT gmail.com

Objective :
To pursue a career in a dynamic and stable work place where I can utilize my knowledge to solve challenges in a creative and effective manner.

Educational Qualification :
2011 Diploma inpetro75% C.P.C.L,manali Chemical Engineering
2009 HSC 62. % GOVT HSS, Emappur .
2007 SSLC 44. % G.M.H.S.school, Thiruvennainallur.

Technical Qualification :
** Operating system (windowxp& window 7)
** Microsoft office

Area of Interest :
** Fertilizer
** Production and Quality
** Bio Medicals and Instrumentation

Academic project :
** Manufacture of hydrogen from water & NAOH and aluminum scrap

Personal skills :
** Perseverance
** Smart worker
** Career motivated

Present position :
** I got one year apprentice in Madras Fertilizer limited

Personal information :
** N.P.K plant
** R.M.S (Raw material handling unit)
** Utility
** Ro plant operation
** Ammonia plant

Experience :
I got one year experience in YantraFintech (India) Limited. In this organization I handled machines like

** Alpha level centrifuge (separating soaps-liquid solid separation)
** Falling flim molecular distillation
** Wiper falling flim molecular distillation
** MAB centrifuge (solid liquid separation)
** Basket centrifuge (solid liquid separation)
** SRU (solvent requiring unit)

Father’s Name : J. Sundaramurthy
Date of Birth : 10 MAY 1990
Gender : Male
Languages Known : Tamil,English

Place :
Date :
Yours faithfully
S.Sivaprakash

[Unregistered]

I am D.M.E. And B.C.A computer application, i am having 6years experience in purchase and stores plz
replay if any vacant in your company Thank you sathish

[Unregistered]

RESUME
Sridharan.P
vijay.sri23 AT gmail.com

ACADEMIC PROFILE :
** Completed diploma in chemical engg, at INSTITUTE OF CHEMICAL TECHNOLOGY with 62%.
** Completed Higher secondary at ST,JOSEPH’S HR SEC SCHOOL, Cuddalore with 60%.
** Completed SSLC at ST,JOSEPH’S HR SEC SCHOOL, Cuddalore with 71%.

ACADAMIC PROJECT :
** “Adhsieve “ Using various acids

TRAINING :
Training on “chemical technology” in chemfab alkalis limited during 4 months.

AREAS OF INTEREST :
** Organic chemistry.
** Mechanical operations.

CO-CURRICULAR & EXTRA CURRICULAR ACTIVITIES :
** Volunteer of Junior red cross in my school

PERSONAL DETAILS :
Name :Sridharan.P
Father’s Name :Panner selvam.k,
Gender :Male
Date Of Birth :23- dec- 1991
Nationality :Indian
Language known :Tamil,English
Hobbies :Playing cricket,chess,Blogging.

DECLARATION :
I here declare that all the details furnished above is true to the best of my knowledge.
Date : 04-05-2013
Place : cuddalore.
(sridharan)