Electrical & Instrumentation Engineer Cuddalore : Nagarjuna Oil Corporation

[muthukalee]

Electrical & Instrumentation

LOCATION : CUDDALORE

Title :Sr. Engineer

Job summary :Electrical & Instrumentation

Qualification : B.E. Electrical (Preferred) / Instrumentation

Duties & responsibilities :
· To assist in convert TRs into LOI and then PO/WO
· Ability to go prepare commercial statements in line with TR’s & to get clarifications as applicable
· To assist in administering PO/WO till its closure

Knowledge, skills and abilities :
· Procurement of Transformers, Sub Stations, Switch Gears, MCBs, HT/LT motors, Panels, FLP items, cables, DCS system & Various instruments etc.
· Good communication and presentation skills
· Ability to accomplish smooth inter department co-ordination

Credentials & experience :
· Should have experience in Refinery/Petrochemicals/ Fertilizer / Chemical/Process industry projects and the preference is in the same order.
· About 5 years of Experience

About us :
Nagarjuna Oil Corporation Limited, a subsidiary of Nagarjuna Fertilizers and Chemicals Limited, is focused on pursuing the opportunities in Oil and Gas domain. The company is currently involved in developing a petroleum refinery project at Cuddalore, Tamil Nad

Contact us :
Kayalpattu Village,
Poochimedu ,Cuddalore District -608801
Tamil Nadu, India

Website : www.nocl.co.in
Email : corpcomm@nagarjunaoil.com

[Guest-IJT]

CHIDI UZODINMA
OBJECTIVE :
To work in a dynamic and challenging work environment which aids in getting sustaining productivity, profitability, competitiveness and long term survival in my field of career.

CAREER SUMMARY :
Crane Operator Engineering (C_OPERA) MECHANICAL ENGINEERING AND DOZAR OPERATOR

SKILL AND ABILITY :
Able work without supervision, good interpersonal relationship, integrity and honesty, Ability to meet high schedule, excellent oral and written communication skill proficient in micro soft world.

EDUCATION :
GOVERNMENT TECHNICAL COLLEGE OWERRI IMO STATE 1996 – 2001
COMMUNITY SECONDARY SCHOOL, EGBERU NDOKI OYIGBO 2005– 2007

OTHER QUALIFICATION :
LDS Resources Employment Services (Career workshop training) 2008

EXPERIENCE :
INTEGRATED LOGISTIC SERVICES (ONNE)

JOB DUTY :
Operating And Up lifting Of Havny object
Installation of GEO location platform (GLP)

POSITION :Automobile Training Engineer
NOBLE OIL SERVICE 2001 – 2003

POSITION :Crane Operator
Water testing services
General maintenance on valves and some CAT-ENGINES
Servicing oil equipment e.g. pumps
Water analysis for treatment control monitory

CREYMOND OIL SERVICE 2004 – 2005 :
POSITION Workshop Technical Assistance
Planning, coordination and supervision of the following project completion of mechanical work and laying of Ogbonibiri.
And construction of wellheads platform and production manifold Ogboimbiri wellheads for Nigeria agip oil company.
Prepare technical reports to management on all issue on the fabrication yard.

JAMACY WORD SERVICES LTD :
POSITION Chief Operator and Engineer

SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED :
POSITION Trainee and operating 1999
Upgrade of Ebubu, Ogale, Okordia and Imo gate Manifolds
Riser replacements on 28” corrioded riser at Awoba
Barrel modification on 10 soku condensate line
Abandonment of dis-used NGC Aba gas Network pipe line
NOTE : these activities are planned for 2006, preparation of project execution plans on going.

SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED 2000 :
POSITION Industrial trainee
Maintenance of cat engineer, turbines
Installation of valves and maintenance
Inspection of various projects in pipeline construction and corrosion monitoring
Repair and operator and also maintenance of industrial machinery
Planning, supervision and progress monitoring of the construction

RIVERS STATE GASTURBINE COMPANY :
POSITION Maintenance Engineer And crane operator

PERSONAL DATA :
DATE OF BIRTH : 31/5/1990
SEX : Male
MARITAL STATUS : Single
HOME TOWN : Oyigbo
STATE OF ORIGIN : Imo State
HOBBIES : Reading , Swimming and Soccer

REFEREES : ON REQUESTS

[Guest]

RESUME
NAME : G.GUNABALAN.
E-MAIL :– gunabalan_2007 AT hotmail.com

Education :
Degree : Bachelor of Engineering.
Discipline : Electrical & Electronics.
Class : First class.
University : Annamalai University.

JOB OBJECTIVE :
I aspire to obtain the position of an electrical Engineer in a company where I can offer my 10+ years of experience in the electrical design and drafting for high rise buildings with a strong hold in areas such as LV design, lighting design, installation of electrical equipment, supervise site execution activities, testing, commissioning and client relations, to complete the projects assigned to me with the maximum efficiency.

AREAS OF DETAILED EXPERIENCE :
** Undertake a thorough study of Tender drawing, specifications & BOQ followed by estimation of the project.
** Preparing project schedule using primavera project planner.
** Electrical Design based on the latest ISO standards depending on the country and their local Authorities mainly includes load calculations, transformer sizing, switch gear selection, cable selection, lighting designing, generator sizing, central battery system designing, UPS designing, lightning protection and earthing designing.(Basic design for fire alarm, plumbing and HVAC).
** Preparing shop drawing, cable schedules & DB Schedules as per local Authorities.
** Proper planning of Manpower and Material for executing the project with in time bound and implementing the same to near reality.
** Supervise all Site execution activities including providing technical inputs on methodologies & coordination with site management activities and devising methods for work simplification.
** Execute the installation and Commissioning of LV system and Co-ordination of HVAC and Plumbing system.
** Arranging site Inspection with Consultant and Main Contractor.
** Attending Project Meeting and Safety meeting.
** Preparing the material submittal, method statement, Daily, Weekly and Monthly Project Report.
** Preparation of AS BUILT DRAWING and O & M according to site condition and handing over to the client.

ORGANISATIONAL EXPERIENCE :
Employer : Saliheen Construction Co. L.L.C. Dubai.
Designation : MEP Engineer (March 2010 till now).

CURRENT PROJECTS :
** Project : X-Ray machine installation and control room at JAFZA in Dubai.(5 numbers)
Client : Dubai customs and DP World.
Role : MEP Engineer.
** Project : Ware house at JAFZA in Dubai.
Client : Woodhouse International L.L.C.
Role : MEP Engineer.
** Project : Ware house at JAFZA in Dubai.
Client : Ace Metal FZCO.
Role : MEP Engineer.

Nature of work :
** Making estimation for the project for MEP works.
** Designing of full electrical systems.
** Basic designing of plumbing, fire alarm and HVAC systems.
** Making Shop drawing. (AutoCAD 2006, 2009).
** Getting approval from the concern department.
** Selection of equipment.
** Installation of equipments.
** Attend meeting with client and consultant.
** Preparing material submittal, method statement and reports.
** Testing and commissioning.
** Preparing as built drawing and O & M and handing over to client.

Employer : Crompton International. Dubai.
Designation : Electrical Engineer (December 2006 to September 2009).
Dubai municipality Electrical test passed. (Registered in DEWA).

Employer : Awan Electrical and sanitary contracting company. Sharjah.
Designation : Electrical Engineer (March 2004 to December 2006).
Sharjah electricity & water authority test passed. (Registered in SEWA)
Nature of work :
** Making estimation for the project.
** Planning electrical wiring.
** Making Shop drawing and load schedule. (AutoCAD 2006&2009).
** Getting approval from the electricity department.
** Selection of equipment.
** Installation of LV panel.
** Attend meeting with client and consultant.
** Preparing material submittal, method statement and reports.
** Testing and commissioning.
** Preparing as built drawing and O & M for handing over to client.

Projects Handle :
** G+ 60 floors and G+20 floor Buildings in Dubai (sub contract work).
** 2B+G+10 floor Building in Dubai.
** G+3+gym floor buildings in Dubai (5 nos).
** G+2 Labour camp in Dubai (5 nos).
** Block factory industrial projects in Dubai (1 no).
** Warehouses in Dubai (5 nos).
** Villa (Arabi house) in Dubai (35 nos).
** G+3 floor buildings in Sharjah (2 nos).
** G+2 Labour camp buildings in Sharjah (3 nos).
** Warehouses in Sharjah (3 nos).
** Villa (Arabi house) in Sharjah (2 nos) .

Employer : Beyonics Manufacturing Pte Ltd. Singapore.
Designation : Technical Specialist (October 2000 to October 2001).
Nature of work :
** Maintenance of all PCB machines.
** PCB debugging for DLT drives.
** Testing PCB in ICT and FCT.
** Verification of DLT drives.
** Power supply arrangements for new machines.
** Installation and commissioning of electrical panels.

Employer : Electricity Department, Pondicherry, India.
Designation : Graduate apprentice training (October 1996 to October 1997).
Natures of work :
** Energy Meters (kWh meter) relay testing.
** Maintenance of transformer.
** Main power station maintenance (220/110 kV).
** Substation maintenance (220/110/22 kV).
** Service connection estimation (House wiring).
** Estimating cost for customer’s proposal.

[Guest]

RESUME
DHANASEKARAN.D
E-mail I.D : sekar.vadalur AT rediffmail.com

Objective : To secure a challenging position of Electrical Engineer, where I can effectively contribute my skills as a Professional, Possessing competent Technical Soft skills.

Skills :
Ability to-
** provide Technical Assistance and Resolution.
** modify Electrical parts, Prototypes, Systems and Meetings.
** Install and maintain Solid State Equipments and Electrical control systems.
** work together with other Engineers and Individual to solve and define the developing problems.
** Excellent Communications, Organizational and Interposal skills.

Educational Records :
** B.E-Electrical and Electronics (68%) ** 2008
Dr. N.N. Engineering College (Anna University),
Cuddalore (dist), TamilNadu.
** Higher sec (71%) StPaul’s school Neyveli, Tamil nadu.
** Currently practicing electrical design course reg oil and gas industry, Hyderabad.

Computer Knowledge : Proficient with
Packages : Microsoft word, Microsoft excel, Power point.
Operating system : Windows 7, XP, Vista, 2000.
Design & drafting : Auto CAD 2010

Area of Interest :
** Transformers and switch gears
** Motors & AC-Drives
** Transmission and distribution.

Work Experience :
Worked as an Electrical Maintenance Engineer in H.T cable manufacturing section of Polycab Cables and Wires Pvt Ltd, Daman, from 15th July 08 to 24thApril 2011.

POLYCAB :
Polycab is an ISO 9001 :2000 , EMS14001 & OHSAS 18001,certified company and one of the leading companies in the wires and cables manufacturing industry in India with a growth rate of about 25% per annum and a variety of products ranging from HT & LT cables, house wires, CO-axial, telecommunication cables etc.

Technical Projects handle :
** Modified 150mm extruder (air cooled) with oil cooling type to increase the output efficiency and to provide uniform cooling to all heating zones. This is to avoid porosity in the surface of the cables & to maintain the flow rate properly and process control in oil cooling was also done.
** Ccv line was modified by auto water flow controlling system by replacing the old auxiliary water flow tube
** As a team leader I erected a Screening machine (copper armour) for HT cable core armouring and tapping.
** AC drives of various Makes were mounted for energy saving & Process control.
** Pb extruder furnaces controlling are replaced by Thyristor control for precious operation and for energy savings.

Responsibilities :
** Trouble Shooting in Triple extrusion CV lines & its associate machines
** Operation and maintenance of Sub-Station transformer, ACB & L.T switch gear units etc.,
** Responsible for Operating and maintaining the plants Equipments such as , AC/DC Motors & VFDs, PLC, Circuit Breakers, Heaters, UPS and LT networks.
** Handling Plant Layout modifications and new machineries commissioning.
** Responsible for Periodic Calibration of All measuring instruments including Transducers, Thermocouples, Controllers, etc...
** Evaluated and arising intimation call for procurement of all Equipments required for each area at start up.
** Planning & Execution of scheduled, corrective & Predictive Maintenance of plant Machineries and Equipments (AC drives, PLCs, etc).
** Undertaking Energy Management systems & Control in the plant.
** Designing for New projects And Selection of equipments for a new set up.
** Working with associated systems like Cranes/hoists, Boilers, Compressors, DG sets.

ISO-9001 & ISO 14001 :
** ISO-9001 Internal auditor.
** Make the Action Request according to our target breakdown time.
** Preparing and maintaining the documents for ISO Quality Audit.
** Coordinator of ISO-14001.
** periodically conduct the meeting to create awareness and important Of Safety As per ISO-14001.
** Make the Improvement program according to RPN (Risk Priority Number).

Achievements :
** Attended in Plant training at Neyveli Lignite Corporation, Tamil Nadu.
** Attended in Plant training at Perambalur sugar mill, Perambalur, Tamil Nadu.
** Attended entrepreneurship awareness program in 2008.

[Guest]

NAME : RAJA.V
POSITION : QA/QC ELECTRICAL INSPECTOR

CAREER OBJECTIVE :
Having 6 years of Experience as QA/QC Electrical Inspector as well as Electrical Supervisor in Petrochemical Plant Project and Refinery Projects. Familiar with Inspection procedures and other applicable code standards and maintenance.

TECHNICAL QUALIFICATION :
Exam Passed : DEEE In April ** 2002
Computer Proficiency : MS-EXCEL, WORD, POWER POINT.

EXPERIENCE IN SAUDI ARABIA : (4 years)
** Organization : NASSER S AL-HAJRI CORPORATION ,
Designation : QA/QC ELECTRICAL INSPECTOR,
Project : METHANOL CHEMICAL PROJECT,AL JUBAIL,
Contractor : LARSON AND TUBRO LTD,
Duration : Sep 2007 to Feb 2008
** Organization : NASSER S AL-HAJRI CORPORATION
Designation : QA/QC ELECTRICAL INSPECTOR
Project : SAUDI KAYAN PHENOLICS PROJECT,AL JUBAIL
Contractor : TECNICAS REUNIDAS GULF
Duration : Mar 2008 to Sep 2009
** Organization : NASSER S AL** HAJRI CORPORATION
Designation : QA/QC ELECTRICAL INSPECTOR
Project : NCP NORTH PLOT PROJECT, AL JUBAIL
Contractor : JGC ENGINEERING COMPANY LTD
Duration : Dec 2009 to Untill

DUTIES AND RESPONSIBILITIES :
** Conducting Surveillance for Construction Activities and Site Inspection for the following Electrical Activities :
** Preparation of Inspection and Test Plan, Construction Quality Procedure and Method of Statement
** Preparation and Submittal for RFI.
** Review and Inspection of all Electrical Material, prior to Installation.
** Daily monitoring the Construction Activities.
** Responsible for the over-all implementation of Quality Control related electrical works accordance with project specifications and Engineering Standards.
** Verify the equipment and devices used in the project meets the required specifications per project requirements, Standard and tested in accordance with the procedures.
** Monitor the Underground installations; check the required burial depth and spacing requirements to adjacent installations, prior to backfilling
** Testing of cable meggaring and HI – POT test.
** Inspection of Electrical Equipment function test and Illumination level testing of lighting system.
** Inspection of electrical installation Panels Monitoring control panel wiring, Termination, cable routing & cable tray installation.
** Verify all required inspection report and test records are systematically generated and compiled according to the approved QC Procedures.
** Coordinate with Client representatives regarding the implementation and quality of works.
** Inspection of Switch Gear Panel installation, Cable Termination and Bus bar torque.
** Installation of control panel marshalling panels and termination continuity and Meggar test .
** Insulation Resistance and Winding Resistance Testing of LV, MV motors.
** Inspection of Ground Rod and Grounding cable, as per Engineering Specification.
** Preparation of Electrical Inspection Reports
** QA/QC Inspection witness for cathodic protection system Underground pipe lines and Metal Tanks. Installation of Permanent Anodes, Temporary Mg Anodes, LIDA Anode, Galvanic Anodes, Test station ,AJB,NJB,MJB ASB and Positive Negative cable laying, and Termination, Installation and termination of Transformer rectifier, Witness of HMWPE Cable Holiday Test and CP system Pre-Commissioning Activities.
** Inspection of Heat Tracing panel Installation, PT, RTD Junction Box Installation and Heat tracing cable laying and meggaring.
** Witness for Pre-commissioning of motor Solo Run activities.
** Prepare the Motor Solo Run test Package.
** Witness of Motor Solo Run Test
** Provide sufficient feed back to QA/QC Manager on the day to day quality issues.
** To supervise and carry out effective implementation of work schedule to clear punch list.

EXPERIENCES IN INDIA :
Organization : ABBAN POWER PLANT
Designation : ELECTRICAL SUPERVISOR,
Duration : Aug-2004 to Nov-2006

Organization : PYRAMID CONSTRUCTION
Designation : Electrical SUPERVISOR
Period : Jul-2003 to Jun-2004

Works carried out for the Electrical Erection & Maintenance works as follows :
** Electrical cable tray installation.
** LV, MV Cable installation.
** LV, MV and HV switchgear installation.
** Motor Control Center (MCC) installation
** Single phase and three phase wiring and Interior & Exterior lighting fixture installation
** Maintenance of HV & MV Distribution Transformers, like visual checking of transformer oil level, oil temperature, winding temperature & breather silica gel. If any abnormalities, rectify that.
** Testing the transformer oil Di electric strength by BDV test, if lesser value oil filtration will be carried out.
** Preventive maintenance of panel boards, ACB, VCB, Oil circuit breakers & motors will be carried out with planned schedule.
** Trouble shooting for the motors, Alternators, DC generators, Rectifiers, welding transformers, Battery banks, UPS system & lighting circuits.
** Operation of Diesel Generator sets and Parallel operation (Synchronizing) of alternators also done.
** Measuring of grounding values of the Earth pits with schedule and record the readings in the concerned register log. Applying petroleum jelly over the contact surface of the earth plate.

[Guest]

Professional Resume
NAME : CHELLIAH PITCHI PILLAI
POSITION : PAINTING SUPERVISOR
NATIONALITY : INDIAN
EDUCATION QUALIFICATION : BA-ECONOMICS

OBJECTIVE :
To achieve complete job satisfaction by executing the projects of different in nature & deliver
Success and strive for excellence in a challenging environment where scope for Leadership.
Teamwork & constant learning is a part of the day ‘s work and to grove up with Organization.

SKILLS :
** Knowledge in paints & coating Systems
** Best client facing skills
** Can handle all types of Measuring instruments and Gauges for Coating.

SUMMARY :
More than 11 Years Experience in the Field of Coating and painting Construction in esteemed
Organizations of various Projects in Saudi Arabia.

EXPERIENCE SUMMARY :
1. COMPANY NAME : LARSEN & TOUBRO LTD (KANCHEEPURAM CHENNAI)
DESIGNATION : PAINTING & COATING SUPERVISOR
PERIOD : MAY 2000 to 2006 APRIL
2. COMPANY NAME : NASSER S AL HAJRI CORPORATION
PROJECT : NCP NORTH PLOT PROJECT
PERIOD : APRIL 2010 to till date
POSITION : PAINTING AND COATING SUPERVISOR
3. COMPANY NAME : NASSER S AL HAJRI CORPORATION
PROJECT : SAUDI KAYAN PHINOLICS PROJECT
PERIOD : FEB 2008 to MARCH 2010
POSITION : PAINTING AND COATING SUPERVISOR
4. COMPANY NAME : NASSER S AL HAJRI CORPORATION
PROJECT : TASNEE ETHYLINE PROJECT
PERIOD : MAY 2006 to FEB 2008
POSITION : PAINTING AND COATING SUPERVISOR

JOB RESPONSIBILITIES :
** Monitoring Daily Painting activities in shop and field. Planning and scheduling in order to achieve the target .
** Morning the effective function of blasting equipment, coating equipment checking the performance Of blaster/ coating application.
** Review the drawing and specification and identify the paint system to be applied.
** Liaise with quality control department and checking the weather condition, substrate condition, surface Preparation, (anchor pattern) Checks surface preparation
** Verifies all equipments where Blasting/Painting was not necessary to be masked out.
** Monitor degreasing and high pressure fresh water wash to be carried out.
** Verifies weld spatter and all surfaces irregularities to be removed.
** Chloride Test to be carried out as per Standard (When required).
** Compressed air used for abrasive blasting to be checked as per standard.
** Monitor size , shape, dryness and cleanliness of the abrasive.
** Abrasive conductivity test to be carried out as per standard (When required).
** Monitor air pressure and nozzle size of blasting equipment.
** Ambient condition and substrate temperature to be observed in every two hours intervals
** Surface cleanliness to be verified using standard.
** The surface to be blasted should be free from grease ,oil and other contaminants.
** Anchor profile to be checked as per client’s requirement and SPCS.
** Monitor blow down of spent abrasives and materials.
** Dust contamination test has been carried out as per Standard (If required).
** Monitor mixing and thinning of the paint.
** Monitor the coating application and wet film thickness.
** Monitor and ensure over coating intervals between each coat of paint.
** Check the paint drum (manufacturer , paint name , batch number , batch certificate , expiry date etc…).
** Prior to blasting and painting check for mixing thinning . Monitoring pot life and ensuring the interval time between prime, mid & top cast as per specification.
** Check for WFT,DFT and holiday detection for U/G pipeline.
** Preparation of painting reports.
** Check the area as per P & ID.
** Conducting daily tool box meeting.
** Monitoring Daily Progress status.

[Guest]

BALAMURUGAN.R
E-mail : bala21ece AT gmail.com

Objective :
To be a result oriented professional in Construction project(Instrumention)/embedded system based challenging assignments in your esteemed concern by imparting all my skills and knowledge acquired so far thereby contributing for mutual growth.

Summary :
** Having 1+ years of experience in software Development project based applications in
Project/EmbeddedSystems.
** Strong Technical skills in Programming and debugging in Embedded System.

Career Profile :
** Worked as Graduate Trainee in Council of Scientific and Industrial Research(CSIR), Chennai from Oct 2008 to Oct 2009.
** Worked as BGA (Ball Grid Array) Trainee in Cadensworth Pvt Ltd ,Chennai from June to July 2010.
** Worked as Programmer in Spiro Solution Ltd , Chennai from Aug 2010 to Sep 2010

Technical Skills :
** Software : C,C++, MATLAB 7.4 /SIMULINK,Embedded C, Keil C IDE
** Hardware : Embedded System (Micro Controller 8051,Atmel 89C51)

Education :
** Bachelor Of Engineering (B.E 2008) :
Specialization : Electronics & Communication Engineering
Institution : Krishnasamy College of Engg & Tech, Cuddalore, Tamil Nadu.
University : Anna University, Chennai, Tamil Nadu.
Percentage : 67% with First Class.
** HSC (2004) :
Institution : Lakshmi Chordia Matriculation Higher Sec School, Cuddalore,Tamil Nadu.
Percentage : 79.75% with First Class.
** SSLC (2002) :
Institution : Lakshmi Chordia Matriculation Higher Sec School,Cuddalore,Tamil Nadu
Percentage : 74.15% with First Class

Recent Projects profile :
#1) Project Title : PARASITE DETECTION and INSTRUMENATION USING IMAGE PROCESSING
Client : CENTRAL SCIENTIFIC INSTRUMENTS ORGANIZATION (CSIO)
Role : Code Development
Environment : Matlab7.4 ,LABVIEW 8.5 & Vision assistant 8.5
Description :
To develop an instrument to detect the enumerate malaria parasite using
fluorescence and image processing algorithms. I have to develop the software for finding the parasites of different stages using the software of labview8.5; Matlab7.4 and vision assistant tools from this reduce the detection time and increase the accuracy.

Work Profile :
** Familiarizing Digital Image processing techniques.
** Various Commands and functions in MATLAB, Image Formats
** Software Development for Image segmentation &Enhancement using MATLAB Software of LABVIEW 8.5

#2) Project Title : REMOTE CREDIT CARD AUTHETICATION SYSTEM
Client : ACADEMIC PROJECT
Environment : Embedded System.
Description : The objective of the project is to avoid misuse of ATM card .

[Guest]

As I apply if have a vacancy for job. I am fresher graduate of B.E., degree and Instrumentation and Control Engineering department. I have enclosed my curriculum vitae for your perusal and consideration. I assure you sincere and hones work if I am given an opportunity to serve.

S.SUNDAR RAJAN
Email : sundarrajice AT gmail.com

CAREER OBJECTIVE :
To seek a challenging career in a reputed firm which would utilize my skills and knowledge to contribute to the overall success of the organization.

ACADEMIC PROFILE :
Degree/Exams Institution Year Percentage
B.E., :
(Instrumentation & Control Engg.) A.V.C. College of Engineering
Mayiladuthurai. 2007-2011 65.51%
12th :
Government higher
Secondary school
Kuttalam. 2006-2007 62.33%
10th :
Government higher
Secondary school
Kuttalam. 2004-2005 70.4%

PROJECT :
** MULTIDIRECTIONAL ECO-FRIENDLY VEHICLE.
Thus an alternative solution can be brought out to reduce pollution and to make an easy drive through the hi-tech metro cities. Using this vehicle eco-polis city can be developed. Reducing the usage of petrol not only saves the cost but also our environment from the harmful pollution and finally another hybrid model can be brought into the automobile field as we are now in the most needed stage.

SOFTWARE EXPOSURES :
** C, MS Office, MAT Lab, Lab view and PLC.

AREAS OF INTEREST :
** Power plant Engineering.
** Control System.
** Virtual Instrumentation.

INDUSTRIAL EXPOSURES :
** In-plant training in NLC,Neyveli (thermal power station-2).
** In-plant training in ABAN Power Company Ltd.
** In-plant training in Manatec Electronics Pvt. Ltd.
** Industrial visit in Kerala Electrical Ltd.

EXTRA SKILLS :
** Typewriting English Higher.

EXTRA CURRICULAR :
** Member of National cadet corps.(2004-2005)
** Member of National social service.(2007-2009)
** Event organizer in college symposium and technical events.

[R.RANJITH KUNAR]

RANJITHKUMAR
CUDDALORE
Email : ranjthkad7 AT gmail.com.

CAREER OBJECTIVE :
I wish to make a career that is challenging and interesting. A job that gives me opportunities to learn, innovate and feel satisfaction of success.

ACADEMIC PROFILE :
B.E(EEE) Arunnai college Engeeringing
Thiruvannamalai Anna university Waiting for Result 65% (CGPA)
Diploma in Electronics& Communication Engg., Annai Vellankanni Polytechnic College
Panruti Dept of Technical Education 2009 70%
SSLC Private State Board 2006 55.7%

PROJECT DONE :
PROJECT NAME TECHNOLOGIES/TOOLS DESCRIPTION
Automatic Water Supply For Green House PIC controller This Project Is Mainly Control The Water Flows Based On Temperature Level

ONGOING PROJECT :
** Title : Sensorless Control Of Permanent Magnet Synchronous Motor
** Technology :FPGA(FieldProgrammable Gate Array)
** Synopsis : The project is mainly used to Control PMSM Without Using Sensor.
AREA OF INTEREST :
** Automobiles.
** Transmission & distribution.

INPLANT TRAINING :
COMPANY NAME AREA COVERED DURATION
NLC Ltd. Tele communication 5days

INDUSTRIAL VISIT :
** NLC limited at Neyveli
** BHEL limited at Trichy.
** Attended open lab program at IIT Madras.

TECHNICAL SKILL :
** Basics of MATLAB.
** PLC, SCADA , HMI .

ADWARDS AND ACHIEVEMENT :
** Presented a paper on the topic of VERTICAL AXIS WIND POWER GENERATION at St. Anne’s College of Engg. & Tech.(Panruti)

MEMBERSHIP :
** Membership in INDIAN ENGG ASSOCIATION.

TRAINING SESSION :
** Attended pre placement training program during the period of august – September in the year 2012

EXTRA CURRICULAR ACTIVITIES :
** Active member in BLOOD BANK


LEADERSHIP AND ORGANISATION CAPABILITIES :
** Designated as class representative for the second year at Arunai Engineering College during on 2009.
** Membership in cultural organisation in Arunai Engineering College.

LANGUAGE KNOWN :
LANGUAGE READ WRITE SPEECH
English
Tamil

STRENGTH :
** Easily adapt to environment.
** Managing critical situation.
** Team player.

HOBBIES :
** Listening music.
** Playing foot ball.
** Bike riding.

PERSONAL PROFILE :
Name : Ranjith kumar R
Date of birth :09-08-1987
Father’s name :Ravichandran A
Father occupation : NLC Employee
Mother’s name : Jayanthi A
Mother’s occupation :Home maker
Gender :Male
Marital Status :Single
Nationality :Indian

DECLARATION :
I hereby declare that the information furnished above is true to the best of my knowledge and belief.

Station :
Date :
(RANJITHKUMAR R)